Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
1291～1320 item / All 3036 items
Unipolar/bipolar drive and single-axis/dual-axis types, with a rich lineup!
The HB type stepping motor is a high-resolution, high-torque hybrid stepping motor. The PJP series offers a variety of specifications, including unipolar and bipolar drive, as well as single-axis and dual-axis types. You can choose from three types: PJP28T, PJP42T, and PJP56T. For more details, please contact us or refer to the catalog.
Linear step motor that utilizes the structure of a stepping motor for linear motion!
The "PFCL25/PFL35T series" of the PFCL/PFL series of direct drive stepping motors is a linear step (TM) motor that utilizes the structure of a stepping motor for linear motion. Since it is a stepping motor, control is simple. It features a straightforward design with a female thread inside a rotor supported by ball bearings, allowing a male thread to enter and exit. The use of special threads achieves high thread efficiency and large thrust. The ball bearing support and low-friction screw contribute to a long lifespan. It is available in three lead types: 0.48mm, 0.96mm, and 1.20mm. There are two types of effective strokes (travel distances): 30mm (total length 60mm) and 60mm (total length 90mm). The standard effective stroke is 30mm, so please specify this when placing your order. For more details, please contact us or refer to the catalog.
The frequency-synchronized motor is not affected by voltage fluctuations or load variations!
A synchronous motor is a frequency-synchronized motor. If the power supply frequency is constant, it rotates at a constant speed (synchronous speed) and is not affected by voltage fluctuations or load variations. It is protected by impedance. Except for some parts, the coils used in NPM synchronous motors have a high resistance value, preventing excessive current from flowing through the coils. This means that it can prevent coil burnout. Since it is an AC motor, it simply rotates when the power supply is connected, and no control circuit is required. It uses permanent magnets in the rotor, which provides excellent responsiveness during startup and shutdown. It starts and stops simultaneously with the power ON/OFF. For more details, please contact us or refer to the catalog.
Since the table position is measured constantly, high-precision positioning is possible!
The Shaft Motor NP ROBO SLP series is a shaft motor application product that uses high-precision linear scales from Heidenhain, allowing for high-precision positioning by continuously measuring the table position. Additionally, it is a simple, lightweight, and compact shaft-type linear motor that efficiently generates significant thrust even with a short coil length, using only magnets and coils. Compared to ball screws, it achieves high responsiveness by directly driving the slide. The shaft-type linear motor has a structure that allows the coil unit to efficiently capture the magnetic flux generated by the permanent magnets arranged within the shaft, achieving high thrust (high acceleration) while being coreless. For more details, please contact us or refer to the catalog.
"High precision, high response, cogging-free new linear actuator" Explanation of coreless shaft motor
1. What is a shaft motor? A shaft motor is a type of linear servo motor. There are two visible types: "shaft type" and "flat type," and they can further be categorized based on whether they use a magnetic core (core) or not (coreless) in the magnetic circuit.
It can blow stronger static pressure air than fans of the same size, enhancing the cooling effect.
Due to its strong static pressure, it can deliver air even in devices with high airflow resistance where components are densely packed, demonstrating sufficient cooling capacity. 【Features】 ● Ideal as a fan for integration into industrial equipment and devices. ● Utilizes strong static pressure characteristics, making it suitable for efficiently cooling and exhausting heat within equipment. ● Since air is expelled from a single point, it is also suitable for applications requiring direct airflow for localized cooling. ● The direction of intake and exhaust can be changed. ● The bearing structure employs high-performance dual ball bearings, achieving an expected lifespan of 70,000 hours (at 40°C). Thanks to the long-lasting dual ball bearings, maintenance frequency can be reduced, resulting in overall cost savings.
It can provide a stronger airflow with static pressure than fans of the same size, enhancing the cooling effect.
Due to its strong static pressure, it can deliver airflow even in devices with high airflow resistance caused by densely packed components, demonstrating sufficient cooling capability. 【Features】 ● Ideal as a fan for integration into industrial equipment and devices. ● Utilizes strong static pressure characteristics, making it suitable for efficiently cooling and dissipating heat within equipment. ● Since air is expelled from a single point, it is also suitable for applications requiring direct airflow for localized cooling. ● The direction of intake and exhaust can be changed. ● The bearing structure employs high-performance dual ball bearings, achieving an expected lifespan of 70,000 hours (at 40°C). Thanks to the long-lasting dual ball bearings, maintenance frequency can be reduced, resulting in overall cost savings.
It can blow stronger static pressure air than fans of the same size, enhancing the cooling effect.
Due to its strong static pressure, it can deliver air even in devices with high airflow resistance where components are densely packed, demonstrating sufficient cooling capability. 【Features】 ● It is optimal as a fan for integration into industrial equipment and devices. ● Utilizing strong static pressure characteristics, it is suitable for efficiently cooling and exhausting heat within the equipment. ● Since air is expelled from a single point, it is also suitable for applications requiring direct cooling in localized areas. ● The direction of intake and exhaust can be changed. ● The bearing structure employs high-performance dual ball bearings, achieving an expected lifespan of 70,000 hours (at 40°C). Thanks to the long-lasting dual ball bearings, maintenance frequency can be reduced, resulting in overall cost savings.
It can deliver stronger static pressure airflow than fans of the same size, enhancing the cooling effect.
Due to its strong static pressure, it can deliver air even in devices with high airflow resistance where components are densely packed, demonstrating sufficient cooling capacity. 【Features】 ● Ideal as a fan for integration into industrial equipment and devices. ● Utilizes strong static pressure characteristics, making it suitable for efficiently cooling and exhausting heat within the equipment. ● Since air is discharged from a single point, it is also suitable for applications requiring direct airflow for localized cooling. ● The direction of intake and exhaust can be changed. ● The bearing structure employs high-performance dual ball bearings, achieving an expected lifespan of 70,000 hours (at 40°C). Thanks to the long-lasting dual ball bearings, maintenance frequency can be reduced, resulting in overall cost savings.
20% time reduction with automatic insertion type Torx bits!
Achieving automation of bit insertion through research on the lead angle of the flange part of the Torx bit!
This is a parallel shaft gear motor that has perfected ease of use.
The "Presto NEO Gear Motor" achieves quiet operation with a high engagement rate gear and a high rigidity design. Additionally, it is a parallel shaft gear motor that maximizes usability by incorporating high load capacity bearings and a high rigidity casing, allowing for a large permissible radial load. (The Presto NEO Gear Motor is a product of Sumitomo Heavy Industries Gear Motor Co., Ltd.)
We provide the optimal drive source from a rich lineup.
"Transport safely and reliably," "maintain position," "unroll without wrinkles and at high speed," "roll up," "cut," "extract," "mold" with high speed and high precision. We have prepared various motors to achieve this in product processing.
Printer-integrated weighing indicator AD-4405
◆Dual Range A single scale can be configured with a dual range specification that divides the weighing range into two. Two sets of display and weighing capacities can be set on one scale. ◆Comparator Comparison of up to 5 levels is possible. ◆Simple Counting Function Counting of up to 10,000 items is possible. ◆Code Memory Memory for 4 sets of code numbers is possible. ◆Addition and Aggregation Function The addition of weighing values can be performed manually or automatically. ◆Digital Linearization Effective for scales with a wide range or large platforms. ◆Digital Span Calibration is ideally done using actual weights like calibration weights, but if that is not possible, calibration can be done by inputting the output value of the load cell (overall accuracy is approximately 1/500). ◆UFC Function A function that allows for flexible configuration of output formats via RS communication, enabling customization of printer print formats and communication formats.
We will customize the weighing application to meet your requirements.
We customize weighing applications and create new applications according to customer requirements. AD-4821A: Multi-Way Controller (Input Weighing), AD-4821B: Multi-Way Controller (Sorting Weighing), AD-4825: Weighing Controller for Formulation (Formulation Weighing), AD-4820-52: Belt Scale (Constant Feedware), AD-4820-53: Tension Meter (Tension Measurement), AD-4820-57: Concrete Batching Controller (Ready-Mix Concrete Plant), AD-4820-54: Garbage Crane, AD-4820-58: Simple Weighing Controller for Formulation (Input Weighing, Discharge Weighing, Formulation Scale). For more details, please contact us or refer to the catalog.
Ultra-compact explosion-proof AC servo motor specification update
In response to requests for small explosion-proof motors, we have started selling two types: 200W and 600W as standalone products. They can be used as embedded devices for driving equipment installed in hazardous environments. The small explosion-proof AC servo motor, developed during the process of creating a painting robot line dancer, demonstrates its effectiveness as a driving device for equipment such as painting robots and paint pump syringe pumps, among others, in hazardous environments. ● Achieves one of the smallest classes in the world for pressure-resistant explosion-proof AC servo motors! ● Contributes to space-saving for the entire system due to its compact and lightweight design! ● The cable exit is on the motor shaft side, allowing for a compact routing. ● Certified according to the latest explosion-proof guidelines from 2008 (certified by the Industrial Safety and Technology Association).
A large hollow diameter has been created in a compact shape, allowing for expectations of miniaturization and high precision!
If it is a standard shape, we deliver in two weeks, and even for custom specifications, we deliver in about 1.5 months.
A large hollow diameter has been created in a small exterior shape. The exterior size is 36 with an inner diameter of 16 mm.
A unique small motor with a diameter of 36mm and a hollow shaft of 16mm. It holds infinite potential for optical system applications.
A large caliber that allows no rivals. It greatly expands the freedom and possibilities of design. Custom products are also available.
By creating a large-diameter hollow in the rotor, the torque decreases; however, we have designed it using winding technology and precision assembly technology to maximize the torque. We offer two types of shaft shapes: a shaft with a mounting base (V type) and a shaft with a tapped hole (H type). We will propose or select the most suitable driver for your applications and driving conditions, including pulse input types and AE-LINK (built-in controller) drivers. For more details, please download the catalog or contact us.
Slim and compact. It will now be possible to use it in small spaces where electrification has been difficult until now.
The "Compact Linear Stepping Motor LSM Series" is compact because it does not use mechanical components such as ball screws or belts. Its slim design allows for use in small spaces that were previously impossible to electrify. The method of extracting lead wires from the stator side ensures high reliability and ease of use. Shapes can be selected according to application needs. → For pressing control: Front mounting type (P type) → For transportation: Floor mounting type (C type) We also offer custom solutions tailored to the customer's usage environment. For more details, please download the catalog or contact us.
A position control unit capable of motion control programming.
The programmable position control unit EPOS P is a standalone type positioning driver that adds PLC functionality (capable of saving operating programs) to the features of the conventional product EPOS (positioning driver).
Built-in drive circuit (speed control)
The flat shape allows for compatibility with a variety of applications!
Built-in drive circuit (speed control)
The flat shape allows for compatibility with a variety of applications!
Inner rotor brushless DC motor. Rated output of approximately 90W at 36V drive.
The EC -i40/70W is enhanced with neodymium magnets, and its rated output at 36V operation is approximately 90W!
Brushless DC motor capable of withstanding harsh conditions.
Maxon Motor has announced the new product EC 22 HD (Heavy Duty) as part of its standard product lineup, pioneering the world with its ability to withstand harsh conditions. The brushless motor EC 22 HD, developed under extremely high demands in deep drilling technology, can endure environments so harsh that conventional motors cannot operate.
Low-cost version of the DCX program, high performance at a low price.
Powerful neodymium magnets, state-of-the-art winding technology, design optimized for cost, and low-cost manufacturing methods: maxon DC-max motors achieve the best cost performance with maximum performance and compact size. You can also choose from a variety of other components, such as graphite and precious metal brushes, sleeve bearings, and ball bearings.
Long lifespan, excellent torque characteristics, high output, and a wide range of rotational speed servo motor.
Brushless EC motors are not only long-lasting but also feature excellent torque characteristics, high output, and a wide range of rotational speeds, making them ideal for applications that require high quality and dynamic performance. For more details, please contact us or refer to the catalog.
