We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Resin(100) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

Resin Product List

211～225 item / All 278 items

Displayed results
Resin, plastic materials thermal gravimetric analysis (TGA)

Resin, plastic materials thermal gravimetric analysis (TGA)

The amount of inorganic fillers such as glass fibers, talc, and carbon black can be measured!

In "Thermogravimetric Analysis (TGA)," which is a type of thermal analysis, we measure the weight change of a sample when heated under specific conditions. Simultaneous measurement of Differential Thermal Analysis (DTA) is also possible. This allows us to capture chemical changes accompanied by weight changes such as decomposition, oxidation, and reduction, as well as changes without weight changes such as transitions and crystallization. 【Measurement Conditions】 ■ Temperature Range: Room Temperature to 1300℃ ■ Measurement Atmosphere: Air, N2 ■ Sample Amount: 10mg ■ Corresponding Standards: JIS K7120 (TG/DTA) *For more details, please refer to the related links or feel free to contact us.

  • Contract Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PARQIT For Replica Molds

PARQIT For Replica Molds

Resin for replica molds that do not require release agent treatment

PARQIT is a true light-curing resin that starts curing solely with light and fully cures only with light. Among them, it is a resin suitable for the production of fine structures. It is widely used as a replica mold for imprinting, and once produced as a replica mold, it can be repeatedly transferred without the need for release agent treatment. *The number of transfers may vary depending on the structure of the transfer object, the properties of the transfer material, and other conditions. *For more details, please download the catalog or contact us.

  • plastic
  • glue
  • Optical Experimental Parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Engineering plastic material "PPSU - Polyphenylsulfone"

Engineering plastic material "PPSU - Polyphenylsulfone"

Capable of absorbing very large shocks! A thermoplastic resin with superior impact resistance and chemical resistance compared to PSU and PEI.

"PPSU - Polyphenylsulfone" is a rigid and tough amorphous thermoplastic resin with a transparent amber color. It withstands continuous exposure to moisture and high temperatures, capable of absorbing very large impacts without cracking or breaking. It has superior impact resistance and chemical resistance compared to "Polysulfone (PSU)" and "Polyetherimide (PEI)." Additionally, in practical tests of sterilization using high-temperature steam, no crazing or destruction occurs even after more than 1,000 cycles. It possesses extremely strong hydrolysis resistance. 【Features】 ■ Withstands continuous exposure to moisture and high temperatures, capable of absorbing very large impacts ■ Superior impact resistance and chemical resistance compared to PSU and PEI ■ No crazing or destruction occurs in practical tests of sterilization using high-temperature steam ■ Possesses extremely strong hydrolysis resistance *For more details, please refer to the PDF materials or feel free to contact us.

  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"CEPLA&SA" Japanese-made ultra-heat-resistant polyimide molded body and resin

"CEPLA&SA" Japanese-made ultra-heat-resistant polyimide molded body and resin

The heat distortion temperature is up to 500°C! Polyimide resin has top-class heat resistance, mechanical strength, and processability among plastics!

Our company has been domestically manufacturing and selling BPDA-based polyimide resin "CEPLA & SA" domestically for many years, and it has been widely adopted in the semiconductor, electronic components, LCD, and industrial sectors. BPDA-based polyimide resin not only features heat resistance, mechanical strength, insulation, lubricity, and chemical properties typical of polyimide resins, but it also excels in mechanical strength, low water absorption, chemical resistance to alkalis, and radiation resistance, making it suitable for use in artificial satellites. It is easy to process, has minimal dimensional changes due to heat, and is suitable for metal replacement and product weight reduction. Why not consider replacing components that require heat resistance and insulation in your manufacturing processes? We offer four standard grades: "CEPLA," "EXTRA," "SA101," and "SA201," and we can introduce grades tailored to specific applications. In addition to standard products, we also accommodate custom processing by partner companies. [Features] ■ Long-term domestic manufacturing of BPDA-based polyimide resin ■ Usable in high-temperature processes ■ Stock items can be shipped the next day *For more details, please refer to the catalog.

  • Ceramics

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SK Talc Compound

SK Talc Compound

By incorporating it into the product, additional effects such as increased rigidity, enhanced luxury feel, and improved heat resistance can be expected.

We would like to introduce the 'SK Talc Compound' handled by Sankyo Chemical Industries. This product has established high dispersibility through our unique dispersion processing technology and has a long track record in the food sheet sector. By incorporating it into products, additional effects such as increased rigidity, enhanced premium feel, and improved heat resistance can be expected. For inquiries about other resins or compounds with different talc purity, please consult your sales representative. 【Product Details】 ■Product Name: HFS ■Base Resin: HDPE ■Compound MFR: 0.5, 10.0 ■Talc Purity: 60% ■Specific Gravity: 1.53 *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Amorphous polyester resin "ALTESTER SH grade"

Amorphous polyester resin "ALTESTER SH grade"

A special grade of ALTESTER suitable for applications requiring heat resistance and impact resistance! Amorphous and highly transparent!

The "ALTESTER SH Grade" is a special grade that has heat resistance and improved impact resistance. The impact resistance is higher compared to existing grades, on par with PET, and it has good chemical resistance as an amorphous polyester. Additionally, it has a Tg of 135°C and a total light transmittance of over 91%. It is a transparent material that demonstrates high heat resistance. 【Features】 ■ Glass transition temperature is 135°C, no deformation in boiling test ■ Amorphous with high transparency ■ Impact resistance is higher compared to existing grades, on par with PET ■ Good chemical resistance as an amorphous polyester ■ Listed in the Ministry of Health, Labour and Welfare positive list *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ESD Countermeasure CNT Composite PEEK Resin 'SARPLUS(R)'

ESD Countermeasure CNT Composite PEEK Resin 'SARPLUS(R)'

ESD measures, uniformity of antistatic properties! Improving brittleness with filler reinforcement materials.

"SARPLUS(R)" is a CNT composite PEEK resin that allows for control of resistance values through the networking of nano-fillers. It improves strength and elastic modulus while maintaining impact strength comparable to neat materials. Please feel free to contact us for sales or prototype inquiries. 【Characteristics (excerpt)】 ■ Tensile Strength: 107 MPa (measured by method K7161) ■ Elongation at Break: 19% (measured by method K7161) ■ Flexural Modulus: 4,600 MPa (measured by method K7171) ■ Flexural Strength: 173 MPa (measured by method K7171) ■ Charpy Notch (with): 6.9 kJ/m² (measured by method K7111) ■ Surface Resistance Value: E5-E9 Ω (measured by method Hailesta) *For more details, please refer to the PDF document or feel free to contact us.

  • Anti-static products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-temperature resistant resin 'PEEK' [Short delivery time, small lot available]

High-temperature resistant resin 'PEEK' [Short delivery time, small lot available]

High-performance resins that are actively used in multiple fields such as semiconductors, aerospace, food, and medical applications! Capable of handling small batches through machining as well as mass production via injection molding!

PEEK is a high-performance thermoplastic resin (super engineering plastic) that excels in "high heat resistance," "mechanical strength," and "chemical resistance." PEEK boasts top-tier thermal properties among thermoplastic resins, with a continuous use temperature of approximately 250°C and a melting point of 334°C. It has exceptional chemical resistance, particularly against acids and alkalis at high temperatures. Additionally, it exhibits excellent insulation and dielectric properties across a wide frequency range. PEEK can accommodate orders from a single piece through machining, as well as mass production lots via injection molding. 【Features】 ■ Heat Resistance The continuous use temperature for high-temperature characteristics is approximately 240 to 250°C. The melting point is 334°C, placing it among the highest ranks of thermoplastics and plastics. ■ Excellent Radiation Resistance It is resistant to degradation from radiation and can maintain insulation properties up to 1000 Mrad. ■ Relatively Non-flammable (low smoke generation) During combustion, it does not produce irritating gases, and smoke generation is very minimal. *For more details, please request a catalog or view the PDF data available for download.

  • タイトルなし.jpg
  • CMP Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Attention those struggling with nylon shortages! Introduction of 3D printer utilization examples.

Attention those struggling with nylon shortages! Introduction of 3D printer utilization examples.

For those struggling with molded products due to the global nylon shortage, 3D printing is possible using nylon 12.

We have adopted a powdered type of "Nylon 12" as an alternative to Nylon 6 and Nylon 66, which can be shaped using a 3D printer. - Raw materials are difficult to obtain, and we are looking for alternative materials within the same nylon category. - We would like to obtain prototypes within 1 to 2 weeks. - For annual production quantities of 100 to 500 units, using molds is not cost-effective. - Due to complex shapes, machining costs become high. If you are facing such challenges, we recommend Nylon 12 using the PBF method. 【Features of Nylon 12】 ■ Tough and resistant to cracking ■ Can be shaped without supports, enabling complex geometries ■ Movable parts can be produced without assembly ■ Can be designed to match the shape, operation, and mounting mechanisms of the workpiece, allowing for small-scale production 【Solution Examples】 ■ Cost reduction for functional evaluation prototypes ■ Quick procurement of parts ■ Cost reduction for low-volume, high-variety final products ■ Supply of discontinued parts *For more details, please download the PDF materials or feel free to contact us.

  • Other polymer materials
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Alpha Tech 388 Penetrating Epoxy Adhesive for Concrete Crack Repair

Alpha Tech 388 Penetrating Epoxy Adhesive for Concrete Crack Repair

An infiltrating epoxy adhesive that demonstrates excellent penetration performance even for microcracks of 0.05mm.

Alpha Tech 388 is a penetrating epoxy adhesive developed for repairing cracks in concrete. By simply applying it to the surface of the crack, it penetrates into the crack through capillary action, bonding and integrating with the concrete. Therefore, it is ideal for repairing cracks in concrete structures in civil engineering and construction. JWWA K 143 (Epoxy resin coating method for the interior surface of concrete water tanks for water supply) JWWA Z 108 (Water supply materials - Leaching method) compliant product 【Features】 - It can penetrate and bond by applying with a brush or roller from the surface of the crack. - It can penetrate and bond not only downward but also upward and horizontally due to capillary action. - It exhibits high strength and durability against compression, bending, and tension. - It demonstrates high adhesive performance on both dry surfaces and wet concrete. - With low viscosity and a long usable time, it is ideal for injection, application, and filling. - It is solvent-free, containing no volatile components. *For more details, please refer to the PDF document or feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Colored fluororesin (PTFE) adhesive tape "No.923S"

Colored fluororesin (PTFE) adhesive tape "No.923S"

As an H-class insulating material, it is also suitable for coil insulation! Excellent heat resistance, chemical resistance, and non-stick properties.

"No.923S" is a tape made from a high-strength film of orange-colored polytetrafluoroethylene (PTFE) resin, with surface treatment applied to one side and a heat-resistant silicone adhesive coated on the treated surface. It can be used for general sliding applications by adhering it to metals, plastics, ceramics, and more. It possesses excellent characteristics, including electrical properties, heat resistance, chemical resistance, and non-stick properties. 【Features】 - The non-stick side has excellent properties of polytetrafluoroethylene resin, including electrical properties, heat resistance, weather resistance, chemical resistance, water resistance (water repellency), and non-stick properties. - Excellent tensile strength. - Excellent flame resistance. *For more details, please refer to the PDF document or feel free to contact us.

  • No.923Sサブ.PNG
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Phenolic resin for FRP 'MWF-2520LV'

Phenolic resin for FRP 'MWF-2520LV'

Low odor / low formaldehyde type phenolic resin for FRP!

We offer a low-odor FRP phenolic resin, 'MWF-2520LV', which contains less than half the amount of formaldehyde compared to conventional products. This product can cure with a lower amount of curing agent compared to conventional products. Additionally, it is designed to reduce the amount of moisture generated during the curing reaction, resulting in high bending strength of FRP molded products. 【Features】 - Can cure with a lower amount of curing agent compared to conventional products - Designed to reduce the amount of moisture generated during the curing reaction - High bending strength of FRP molded products - Low viscosity and suppresses reaction moisture by 10% - Low odor due to formaldehyde content being half that of conventional products *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Horiko Co., Ltd. Solvent-free Anti-slip Resin Series "Multi Grip"

Horiko Co., Ltd. Solvent-free Anti-slip Resin Series "Multi Grip"

Non-slip and improved visibility in places where durability is required! Solvent-free anti-slip resin for application.

The solvent-free anti-slip resin series "Multi Grip" is a highly durable resin for identifying step differences that can be applied like paint. By applying it in lines on stair nosing and slopes, it helps avoid the risks of slipping and falling, ensuring safe walking. It is particularly well-regarded for its durability and ease of application in high-footfall areas such as stairs, and has been adopted by many railway companies and public facilities. Its wear resistance is approximately 20 times higher than that of other resins, providing a level of wear resistance comparable to marble. 【Features】 - High durability and weather resistance - Reduction in time and costs for application - Odorless due to the absence of solvents - No shrinkage after curing - Environmentally friendly as it does not use VOCs (volatile organic compounds) For more details, please contact us or download the catalog.

  • Other safety and hygiene products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Research Material] The Global Market for Chromatography Silica Resins

[Research Material] The Global Market for Chromatography Silica Resins

World Market for Chromatography Silica Resins: 30-60, 60-100, 100-200, over 200, Pharmaceuticals & Biotechnology, ...

This research report (Global Chromatographic Silica Resins Market) investigates and analyzes the current state and outlook for the global market of chromatographic silica resins over the next five years. It includes information on the overview of the global chromatographic silica resins market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the chromatographic silica resins market focus on ranges of 30-60, 60-100, 100-200, and over 200, while the segments by application target pharmaceuticals & biotechnology and food & chemicals. The regional segments calculate the market size of chromatographic silica resins by dividing it into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa. It also includes the market share of major companies in chromatographic silica resins, product and business overviews, and sales performance.

  • Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Resin

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.