We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Resin(100) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

Resin Product List

226～240 item / All 278 items

Displayed results
Newly Developed Product: Two-Component Heat-Curing Epoxy Resin TE-7820FR3

Newly Developed Product: Two-Component Heat-Curing Epoxy Resin TE-7820FR3

High Tg × Flame Retardant V-0 × Improved Copper Adhesion! Suitable for Power Device Encapsulation.

The "TE-7820FR3" is a two-component, heat-curing epoxy resin developed for power device encapsulation applications. With an easy-to-handle mixing ratio of 100/100, it achieves excellent filling properties due to its low viscosity and high workability. It features high heat resistance with a glass transition temperature of 174°C and flame retardancy equivalent to UL94 V-0 (2mm thickness). Additionally, it has been designed to improve adhesion to copper, enhancing the reliability of bonding with copper substrates and conductors. This makes it suitable for applications requiring thermal, electrical, and mechanical performance, such as semiconductor packages and power modules. 【Features】 ■ Two-component heat-curing epoxy resin (mixing ratio 100/100) ■ High strength and high heat resistance (Tg = 174°C) ■ Excellent thermal cycle resistance with a low coefficient of thermal expansion (20ppm/K) ■ Flame retardancy: UL94 V-0 equivalent (2mm thickness) ■ High insulation properties (dielectric breakdown strength over 25kV/mm, volume resistivity 4.0×10^16Ω·cm) *For more details, the product's specification sheet is available for download as a PDF below, or please contact us. *Samples are also available, so please contact us if needed.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Development] Two-component Room Temperature Curing Epoxy Resin TE-1006-2

[New Development] Two-component Room Temperature Curing Epoxy Resin TE-1006-2

Room temperature curing × high adhesion × high moisture resistance! Epoxy resin for small motors and sensors. Cures at room temperature, energy-saving high-performance epoxy.

The TE-1006-2 is a two-component, room temperature curing epoxy resin developed for preventing liquid leakage in small motors and sensor components. It can cure without the need for heating, at 25°C for 24 hours or at 100°C for 30 minutes, contributing to improved work efficiency and energy savings on-site. This product exhibits a shear adhesive strength of 21 MPa (SUS/SUS, 25°C), ensuring high adhesive reliability. Furthermore, it is designed to have high heat and humidity resistance, maintaining performance even in harsh environments. With its high thixotropic properties, it excels in workability, making it easy to apply and build up in targeted areas, thus accommodating a wide range of applications such as sealing small motors, sensors, and electronic components. **Features** - Two-component, room temperature curing epoxy resin (mixing ratio 100:12) - High adhesion with a shear adhesive strength of 21 MPa - High heat and humidity resistance design ensures long-term reliability *For more details, the product's specification sheet is available for download as a PDF below, or you can contact us for more information.* *Samples are also available, so please contact us if needed.*

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DuPont™ Bespoke® SP-1 for solving vacuum process problems.

DuPont™ Bespoke® SP-1 for solving vacuum process problems.

100% polyimide. It has excellent strength, heat resistance, and electrical properties.

If the materials for processing are in stock, same-day shipping is possible. The size chart is available on our website. Please take a look.

  • Engineering Plastics

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DCPD hydrocarbon resin

DCPD hydrocarbon resin

Free samples available! For the replacement of C5 petroleum resin!

It is cheaper than C5 petroleum resin, allowing for cost reduction. - Good compatibility with rubber. - Can be used as a modifier for paints and lacquers. - Improves color development, gloss, and drying properties of inks.

  • Organic Natural Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Research Material] Global Market for PE Pipe Resin

[Research Material] Global Market for PE Pipe Resin

World Market for PE Pipe Resin: PE 100, PE 80, Others, Water Supply Pipes, Sewer and Drainage Pipes, Oil and Gas Pipes, Agricultural Pipes, Others

This research report (Global PE Pipe Resin Market) investigates and analyzes the current status and outlook for the global PE pipe resin market over the next five years. It includes information on the overview of the global PE pipe resin market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the PE pipe resin market include PE 100, PE 80, and others, while the segments by application cover water supply pipes, sewage and drainage pipes, oil and gas pipes, agricultural pipes, and others. The regional segments are categorized into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa, to calculate the market size of PE pipe resin. The report also includes the market share of major companies in the PE pipe resin sector, product and business overviews, and sales performance.

  • Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Newly Developed Product: Two-Component Heat-Curing Epoxy Resin TE-6000

Newly Developed Product: Two-Component Heat-Curing Epoxy Resin TE-6000

Low viscosity for thorough filling of details! An epoxy resin that can also be considered as a varnish alternative. Cures at room temperature and contributes to energy savings.

The "TE-6000" is a low-viscosity, high-strength epoxy resin suitable for encapsulating electronic and electrical components. It is a two-component system with a mixing ratio of 100:30, making it easy to handle, and it has low-temperature curing properties, allowing it to cure at 70°C for 3 hours or at room temperature. Additionally, it enhances flexibility in the production process and contributes to energy savings. 【Features】 ■ Two-component heat-curing epoxy resin (mixing ratio 100:30) ■ Low viscosity with excellent filling properties and workability ■ Low-temperature curing (70°C for 3 hours, room temperature curing also possible) ■ High strength (flexural strength 110 MPa, elastic modulus 3,000 MPa) ■ High insulation properties (dielectric breakdown strength 30 kV/mm, volume resistivity 1×10^16 Ω·cm) *For more details, the product specification sheet is available for download as a PDF below, or please contact us. *Samples are also available, so please contact us if needed.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Newly Developed Product] Two-Component Heat-Curing Epoxy Resin TE-7130

[Newly Developed Product] Two-Component Heat-Curing Epoxy Resin TE-7130

General-purpose epoxy resin for encapsulating electrical and electronic components. Suitable for encapsulating motors, coils, and more.

"TE-7130" is a general-purpose, two-component, heat-curing epoxy resin for the encapsulation of electrical and electronic components. With a mixing ratio of 100:20, it is easy to handle, and after curing, it becomes an encapsulant that combines high strength and high insulation properties. Its greatest feature is the realization of a low coefficient of linear expansion of 27 ppm/K. This reduces expansion and contraction due to temperature changes, thereby lowering the risk of crack formation. It is resistant to thermal cycling, ensuring long-term reliability for power devices and electronic components. [Features] - Two-component heat-curing epoxy resin (mixing ratio 100/20) - Low coefficient of linear expansion: 27 ppm/K → strong against thermal cycling, crack suppression - High insulation properties (dielectric breakdown strength 33 kV/mm, volume resistivity 1×10^16 Ω·cm) - High strength (flexural strength 141 MPa, flexural modulus 10,000 MPa) - Low water absorption rate of 0.1% ensures long-term stability *For more details, the product specification sheet is available for download as a PDF from the link below, or please contact us. *Samples are also available, so please contact us if needed.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Room temperature short-term curing epoxy resin TE-6011K

Room temperature short-term curing epoxy resin TE-6011K

A two-component epoxy resin that cures in 4 hours at room temperature! The reduction in curing time leads to cost savings.

TE-6011K 2-component fast-curing epoxy resin Features: Cures in 4 hours at room temperature Applications: Insulation and protection of electrical and electronic components 【Specifications (excerpt)】 ■Mixing viscosity: 19,500 (mPa·s) at 25℃ ■Glass transition temperature: 40℃ ■Cured density: 1.65 (water displacement method) ■Mixing ratio R/H: 100/38 ■Curing conditions: 25℃ x 4h

  • Other polymer materials
  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Impregnating sealant "Resinol 90C"

Impregnating sealant "Resinol 90C"

Leave it to us for gaps of 10μm to 100μm. We seal voids and cavities in powder metallurgy and die casting!

"Resinol 90C" is a sealing agent suitable for filling voids in powder metallurgy and pits in castings and die castings. Due to these voids and pits, powder metallurgy and die casting cannot undergo surface treatment and cannot be used for pressure applications, leading to usage restrictions. By using our impregnation sealing agent, "Resinol 90C," these issues will be resolved. 【Basic Properties】 ■ Material Acrylic resin ■ Heat Resistance -40℃ to 150℃ 【Target Materials】 ■ Powder metallurgy ■ Castings ■ Die castings ■ MIM ■ Pressed powders

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Special synthetic resin "Toughurea"

Special synthetic resin "Toughurea"

Forms a film of over 1mm with a single spray! A special synthetic resin that allows the use of sprayed products in 6 hours.

Tafurea is a special resin that excels in impact resistance, abrasion resistance, weather resistance, chemical resistance, waterproofing, and rust prevention. It can be coated over various materials, including metals, plastics, concrete, and wood. 【Features】 ■ Absorbs shocks due to high elasticity ■ Prevents scratches on products caused by friction ■ Usable with common chemical substances ■ Withstands harsh outdoor environments ■ Prevents moisture intrusion and rust ■ Reduces work time through spray application ■ 0% VOC (volatile organic compounds) content *For more details, please download the catalog or feel free to contact us.

  • Engineering Plastics

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Selection Table: Teflon Fluororesin PTFE

Selection Table: Teflon Fluororesin PTFE

Total production from design and manufacturing to construction and service! Introduction of the selection table.

At Nippon Sakas Co., Ltd., the Platech Division conducts a comprehensive operation from the manufacturing of precision plastic parts to bonding, welding, and assembly. This is a selection table for "Teflon Fluororesin PTFE," which excels in chemical resistance, heat resistance, and self-lubrication. It is used in a wide range of applications. 【Features】 ■ Chemical resistance and heat resistance ■ Self-lubrication ■ Used in a wide range of applications ■ Non-absorbent *For more details, please refer to the catalog or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PBT Natural

PBT Natural

Features: A resin material with excellent electrical insulation properties over a wide temperature range, as well as high chemical resistance and abrasion resistance.

"PBT Natural" has excellent electrical properties and insulation over a wide temperature range, making it suitable for electronic device connectors, housings, and more. It has low water absorption and excellent dimensional stability. It is used in EV components, pulley parts, fan parts, and components related to electric vehicle development. 【Features】 ■ Polybutylene Terephthalate resin ■ Excellent electrical properties and chemical resistance ■ High strength and excellent dimensional stability ■ Weak against strong alkalis *Please feel free to contact us for more details about the material.

  • others
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Polystyrene resin "PSJ-Polystyrene G9001"

Polystyrene resin "PSJ-Polystyrene G9001"

Like regular GPPS, it can be molded by injection and extrusion! It is a heat-resistant grade product.

"PSJ-Polystyrene G9001" is a transparent heat-resistant styrene-based copolymer with a Vicat softening temperature approximately 15°C higher compared to high heat-resistant GPPS. Like regular GPPS, it can be processed by injection and extrusion molding. It is recommended for applications that require heat resistance, such as microwave containers. For more details about other products, please contact us. 【Features】 ■ Heat-resistant grade ■ Has heat resistance between GPPS and polycarbonate ■ Approximately 15°C higher Vicat softening temperature compared to high heat-resistant GPPS *For more details, please refer to the PDF document or feel free to contact us.

  • Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Development] Two-component Heat-Curing Epoxy Resin TE-7000

[New Development] Two-component Heat-Curing Epoxy Resin TE-7000

Fills in detail with low viscosity! A highly reliable epoxy resin that can also be considered as a varnish alternative. Flexible response to work plans with a usable time of 24 hours.

The "TE-7000" is a two-component, heat-curing epoxy resin suitable for sealing applications in electrical and electronic components. Its low viscosity design allows for excellent filling of details and can accommodate complex part shapes. This product has a long pot life of 24 hours (at 60°C), ensuring stable sealing operations while providing ample time for work processes. Additionally, it has a proven track record of passing high-temperature tests at 180 degrees and thermal tests at -40°C and 180°C. 【Features】 ■ Two-component heat-curing epoxy resin (mixing ratio 100:60) ■ Excellent filling properties and workability due to low viscosity ■ Long pot life of 24 hours (at 60°C) ■ High insulation properties (dielectric breakdown strength over 25kV/mm, volume resistivity > 1×10^16Ω·cm) ■ Flexural strength of 81MPa and flexural modulus of 2,400MPa ■ Low water absorption rate of 0.3% for improved reliability *For more details, the product's specification sheet is available for download as a PDF from the link below, or you can contact us for more information. *Samples are also available, so please contact us if needed.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stability confirmation test of the electrical property modification of composite olefin resin.

Stability confirmation test of the electrical property modification of composite olefin resin.

This is the test result confirming the stability of the electrical properties modification of composite olefin resin.

Olefin resins, which are non-polar plastics made only from carbon and hydrogen, are represented by polyethylene (PE) and polypropylene (PP), both of which are produced in large quantities as materials through addition polymerization and are utilized in various molded products that benefit our daily lives. PE is adjusted for density and undergoes post-processing stretching treatments to change its crystallinity for different applications; generally, it is soft and commonly known for low-temperature injection molded products and packaging films. In contrast, PP, with a melting point of 165°C and a density of 0.9, has high crystallinity and excellent chemical resistance, as well as toughness that allows it to withstand long-term use under conditions of over 100°C with applied pressure. A wide variety of durable products are made from it, ranging from injection molded items like large containers to extruded products such as various industrial functional films and bags, as well as hollow molded products like bottles. For more details, please contact us or refer to the catalog.

  • Static electricity eliminator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Resin

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.