Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
211～240 item / All 341 items
Pursuing high productivity with high-speed cutting at 180 SPM.
A fully automated reshoring system that handles everything from ear cutting to accumulation just by placing the mother body on the table.
Cost performance more than twice that of general-purpose system machines.
Fully automatic reshuffling system with easy operation via sheet key input or LCD display.
Speed alarm with automatic switching between low-speed and high-speed modes.
Due to improvements in road conditions and vehicle performance, it is possible that driving speeds have unknowingly increased. The higher the speed, the greater the damage in the event of a collision. It may be a good idea to install a speed alarm to always be mindful of your driving speed, so that if you encounter an unexpected accident, the damage can be minimized. The device automatically switches between low-speed mode for general road driving (65 km/h) and high-speed mode for highway driving (105 km/h), notifying you with a chime sound. This device can accommodate various vehicle speed pulse counts due to the use of a PIC microcontroller, and it can flexibly respond to changes in the set speed. The wiring only requires connecting three wires: the power supply voltage of 12V and the vehicle speed pulse. If you wish to request a specification change, please let us know via email. Changeable parameters: Low-speed limit, High-speed limit, Low-to-high switch time, High-to-low switch speed Initial values: 65 km/h, 105 km/h, 2 minutes, 50 km/h
Supports "multicolor assays" that can simultaneously monitor up to three types of gene expression!
The "AB-2550 Kronos Dio" is a real-time luminescence monitoring system for cultured cells that uses a photomultiplier tube as a detector. Using a 35mm diameter culture dish as the sample container, it is suitable for monitoring gene expression in cultured cells and tissue slices in real-time over a period of hours to days. Additionally, it allows for temperature control (via air circulation) and 5% CO2 control. The CO2 concentration is maintained at a constant level through built-in sensor electromagnetic valve control. 【Features】 ■ Measurement of living cell and tissue samples on a φ35mm culture dish ■ Environment similar to a CO2 incubator with temperature and CO2 concentration control, and humidity ■ High sensitivity and high precision detection of weak bioluminescence using a high-spec PMT ■ Simultaneous measurement of weak bioluminescence in up to three colors ■ Easy-to-use design that is user-friendly *For more details, please download the PDF or feel free to contact us.
Capture extremely weak bioluminescence in living organisms! Simple and easy operation.
The "AB-3000B Cellgraph" is a cell weak luminescence real-time monitoring system developed to detect weak luminescence within a single cell using a high-sensitivity EM-CCD camera. It achieves the detection of weak luminescence through a cooling EM-CCD camera with a highly efficient optical system and the highest level of absolute sensitivity. The chamber where the sample is set provides an environment similar to a CO2 incubator, thanks to a temperature and CO2 gas concentration control system and a humidification system. As a result, it is possible to observe cells and tissue samples in a living state for extended periods. Additionally, it features an internal optical filter for color separation, making it compatible with multi-color reporter gene assays using multiple colors of luciferase. 【Features】 ■ Imaging of cells and tissue samples on a φ35mm dish while alive ■ Environment similar to a CO2 incubator through temperature and CO2 concentration control and humidification ■ High-sensitivity and high-precision detection of weak biological luminescence using an EM-CCD camera ■ Capability to separate and measure multiple colors of weak biological luminescence *For more details, please download the PDF or feel free to contact us.
![[Case Study] pH Value Management Device for Environmental Accident Prevention](https://image.mono.ipros.com/public/product/image/8ce/2001231204/IPROS1609086312903250145.png?w=280&h=280)
We have developed a management device that can remotely monitor the pH level of factory wastewater at Mitsubishi Material's Wakamatsu Plant as per their request!
Mitsubishi Materials Wakamatsu Plant is engaged in initiatives to prevent environmental accidents related to factory wastewater discharge. We have delivered a management device that notifies employees of abnormal occurrences via email in the event of pH anomalies. *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Rice Field Weeding Robot - Aigamo Robot](https://image.mono.ipros.com/public/product/image/995/2001467556/IPROS5819286756552525266.png?w=280&h=280)
Contributing to local farmers' rice field weeding!
To prevent the establishment of weed seeds in rice paddies, we have developed a rice paddy weeding robot called "Aigamo Robot." *For more details, please refer to the PDF document or feel free to contact us.*
![[Example] Conductor Resistance Automatic Monitoring System (Continuity Resistance Monitoring)](https://image.mono.ipros.com/public/product/image/1b9/2000097958/IPROS32035394018965538528.png?w=280&h=280)
Real-time analysis possible simultaneously with data collection! Original data collection and editing functions that reflect customer feedback. Hardware/software that is not limited to specific test chamber manufacturers.
- A system that can automatically monitor conductor resistance in conjunction with the test chamber. - Real-time analysis is possible simultaneously with data collection. - Standard number of channels: 192ch, using high-lifetime relay contacts rated for 100 million cycles (10V/100mA). - Control linked with testing equipment (thermal shock testing machine) is possible. - Adoption of high-temperature resistant custom measurement cables.
![[Example] Event Detector System (Linked with Environmental Test Chamber)](https://image.mono.ipros.com/public/product/image/357/2000097971/IPROS95706844109573816991.png?w=280&h=280)
Simultaneous monitoring of up to 160ch momentary interruption events is possible!!
- A system that can monitor momentary interruption events in the conductive parts with a resolution of 1μsec, in conjunction with the temperature cycle chamber. - It can simultaneously monitor up to 160 channels of momentary interruption events and acquire, display, and save multiple related information besides the momentary interruption events. - Event information (for each channel) - Number of event occurrences, duration of occurrence (momentary interruption time) - Number of cycles, temperature, temperature transition information of the thermal shock tester (up/down/hold) - It can flexibly handle file management, allowing multiple files to be handled simultaneously. - It can handle up to 15 different types of files simultaneously, regardless of whether they are new or existing. - When selecting an existing file, it is possible to continue testing from the last point of completion. - The application software consists of two types: a data collection app and a viewer app (for analyzing saved data). The viewer function is also included in the data collection app, allowing for confirmation of event occurrence status and CSV form output. - Different applications are provided for 12 channels/1 block and 20 channels/1 block (standard: 12 channels/1 block).
The warning lamp flashes to alert the driver of speeding! A highly reliable speed alarm device for forklifts, wheel loaders, industrial vehicles, and more.
The "Speed Alarm Device" monitors the rotation speed of a forklift's tires and alerts the operator with a flashing warning light when the speed exceeds a pre-set limit. The selection of the set speed and tire size can be easily adjusted from the outside. Additionally, the sensor is compact and lightweight, taking up little space, and is non-contact, eliminating wear and mechanical errors. 【Features】 ■ High reliability ■ Non-contact sensor ■ Very easy selection of set speed and vehicle height ■ Warning light flashes in easily visible red ■ Power supply suitable for a wide range of uses *For more details, please refer to the catalog or feel free to contact us.
Compatible with any manufacturer or model. Adhere to speed limits for safety measures within the factory! A highly reliable speed alarm device.
The "Speed Alarm Device" monitors the rotation speed of a forklift's tires and alerts the operator with a flashing warning light when the speed exceeds a pre-set limit. The selection of the set speed and tire size can be easily adjusted from the outside. Additionally, the sensor is compact and lightweight, taking up little space, and is non-contact, eliminating wear and mechanical errors. 【Features】 ■ High reliability ■ Non-contact sensor ■ Very easy selection of set speed and vehicle height ■ Easily visible red flashing warning light ■ Power supply suitable for a wide range of uses *For more details, please refer to the catalog or feel free to contact us.
Prevent speed-related accidents in factories and warehouses before they occur. Can be installed regardless of manufacturer or model.
Our company offers a "speed alarm for forklifts" that contributes to the prevention of accidents caused by industrial vehicles in factories and warehouses. The alarm can be set within a range of 5 to 20 km/h, with fine adjustments possible in 1 km/h increments. It can be installed not only on forklifts but also on various vehicles such as tow trucks, dump trucks, passenger cars, and golf carts, contributing to safety in the workplace. 【Features】 ■ Compatible with various forklifts regardless of manufacturer or model ■ Non-contact sensors that reduce wear and malfunction ■ Can also be equipped with rotating lights, alarm buzzers, and lamps *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Real-time monitoring of water levels.
This is a system for real-time monitoring of water level data. A measurement box is installed at the measurement location to supply power. 【Features】 ○ The measurement station continuously measures the water level and displays the instantaneous value in real-time. ○ Data is displayed and recorded while performing real-time calculations over a user-defined average time. ○ By setting offsets and specific gravity coefficients, it can accommodate various liquids. For more details, please contact us or download the catalog.
The allowable current is 36A! The number of poles is set from 1 to 18 poles as a quasi-standard specification for the multipole slip ring system.
The "SRY36A series" is a multipole slip ring system with a permissible current of 36A. The insulation resistance is over 50MΩ (500V), and the number of poles is set from 1 to 18 as a semi-standard specification. 【Standard Specifications】 ■ Voltage: AC200V DC100V ■ Permissible Current: 36A ■ Insulation Resistance: Over 50MΩ (500V) ■ Insulation Withstand Voltage: 2500V 1min ■ Number of Poles: 1 to 18 ■ Rotation Direction: cw-ccw ■ Permissible Rotational Speed: 2000rpm *For more details, please refer to the PDF document or feel free to contact us.
【High performance, short delivery time, low price】 We respond quickly and flexibly to customer requests with our "domestic integrated system from development to production."
Our company contributes to an efficient development schedule with "high performance, short delivery times, and low prices," leveraging the strengths of our domestic production. "If there are no manufacturers that can handle complex specifications" or "existing products require long delivery times and are expensive," please feel free to consult with us if you have similar concerns! 【Our Features】 ■ High Performance: We have numerous improved defect cases! We leverage the strengths of a specialized slip ring manufacturer! ■ Short Delivery Times: We contribute to your desired delivery times with flexible designs based on in-house integrated production and standard products! ■ Low Prices: We can further reduce prices through a direct sales system! *For more details, please download the materials or contact us directly.
No large-scale capital investment or construction is required! We will monitor the operating status of the machine tools.
At Fact, we handle the "Operational Rate Monitoring System." We have adopted an intuitive and easy-to-understand user interface specifically designed for equipment operation. It can be accessed on PCs, tablets, and smartphones that support web browsers. Additionally, it can communicate up to 100 meters even in environments with poor visibility, and a single gateway can obtain the operational status of all machine tools within that range. 【Features】 ■ Easy installation on machine tools ■ Intuitive and easy-to-understand monitoring screen ■ Statistical data can be saved in CSV format ■ Equipped with 920MHz wireless that reaches 100 meters outdoors ■ Ability to grasp the operational status of machine tools *For more details, please refer to the PDF document or feel free to contact us.
Faster and more creatively! Accurately measuring cells in small and large volumes of cell culture media.
The "Vi-CELL BLU" is an automated cell viability analyzer that performs the entire process from sample staining to counting and viability assessment. It accurately measures cells in small or large volumes of cell culture media, accommodating everything from research to manufacturing scales. It can be used in many facilities that handle cells, such as biopharma and academia. 【Features】 ■ Fully automated from cell staining to equipment cleaning ■ High-speed measurement ■ Requires a small sample volume ■ Reduced inter-instrument variability ■ Supports multi-sample measurement *For more details, please refer to the PDF document or feel free to contact us.
The blue light blue laser is changing the world of soldering! The "BLES system" achieves soldering without flux, which has been difficult until now.
The "BLESsystem" has achieved high-quality, damage-free fluxless soldering by combining a blue laser with a wavelength of 445nm, which has a high absorption rate in metals, and a newly developed dispensing mechanism. It allows for the reduction of flux cleaning processes and efficiently delivers heat to the metal parts, thereby minimizing thermal damage to the surrounding joints. Additionally, it is capable of both pulse wave and continuous wave (CW) oscillation, quickly melting the solder within the capillary using pulse waves while suppressing oxidation of the solder. With CW waves, preheating and post-heating can be performed, accommodating a wide range of processes tailored to the target workpiece. 【Features】 ■ Achieves high-quality, damage-free fluxless soldering ■ Allows for the reduction of flux cleaning processes ■ Capable of minimizing thermal damage to the surrounding joints *For more details, please refer to the PDF document or feel free to contact us.
Newly released "EOG Monitoring System (EOM-3000)" for measuring EO concentration in EOG sterilizers with simple operations.
【Main Features】 1. Easy operation allows for measurement of EO gas concentration and residual EO concentration within the EO sterilizer. 2. Measurement of EO concentration can be performed in both continuous automatic (monitoring mode) and manual (measurement instruction mode) settings. 3. By measuring EO concentration, safe and efficient (cost-effective) sterilization work can be achieved. 4. Real-time monitoring and evaluation of EOG sterilization, measurement of residual EO concentration and safety evaluation, and record management via external output are possible. 5. This is an EO gas analysis device specialized for measuring EO concentration. 【Main Effects】 1. Compliance with the Ministry of Health, Labour and Welfare's requirement for recording ethylene oxide (EO) sterilization conditions. 2. Compliance with inspections by the U.S. FDA (Food and Drug Administration) regarding export approvals for medical devices intended for the U.S. market. 3. Compliance with ISO requirements for measuring residual EO concentration and recording obligations for ethylene oxide (EO) sterilization conditions. 4. Ability to provide detailed reports to clients such as sterilization contractors. For inquiries regarding this matter: 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp
Released the "EOG Monitoring System (EOM-5000/S)" that can continuously and automatically measure the EO concentration of multiple EOG sterilizers.
1. Continuous automatic measurement of EO concentration in multiple EOG sterilizers can be performed, allowing for recording and measurement of EO residual concentration. 2. It can accommodate six EOG sterilizers, with the option to select any number of units and prioritize them as desired. 3. Objective monitoring and evaluation of EOG sterilization, rapid measurement and safety assessment of residual EO concentration, as well as management of these records can be conducted. 4. Management of sterilization and safety can be easily performed, enabling safe and efficient sterilization operations (with good running costs). [Main Effects] (A) Compliance with the Ministry of Health, Labour and Welfare's obligation to record ethylene oxide (EO) sterilization conditions. (B) Compliance with inspections by the U.S. FDA (Food and Drug Administration) regarding export approvals for medical devices intended for the U.S. market. (C) Compliance with ISO requirements for measuring residual EO concentration and recording obligations for ethylene oxide (EO) sterilization conditions. (D) Compliance with reporting details for clients such as sterilization contractors. (E) Easy compliance with the above items (A) to (D). ■ Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932
Launched the "EOG Monitoring System (EOM-5000)" that can measure concentrations in accordance with the sterilization process of EO gas sterilizers.
【Main Features】 1. Easy operation for measuring EO gas concentration and EO residual concentration inside the EO sterilizer. 2. Measurement of EO concentration according to the sterilization process (measurement analysis). 3. Recording of EO concentration in accordance with the sterilization process, with date, time, and concentration printed by the recorder or printer. 4. Measurement of EO concentration can be performed in continuous automatic (monitoring mode) and manual (measurement instruction mode) modes. 5. Safe and efficient (cost-effective) sterilization operations can be conducted. 6. Objective real-time monitoring and evaluation of EOG sterilization / measurement of residual EO concentration and safety evaluation / record management. 【Main Effects】 1. Compliance with the Ministry of Health, Labour and Welfare's obligation to record ethylene oxide (EO) sterilization conditions. 2. Compliance with U.S. FDA (Food and Drug Administration) inspections related to export approvals for medical devices intended for the U.S. market. 3. Compliance with ISO requirements for measuring residual EO concentration and recording obligations for ethylene oxide (EO) sterilization conditions. 4. Reporting details to clients such as contract sterilization service providers. ■ Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932
Technical transfer information regarding the EOG monitoring system (EOG sterilization monitoring device) as a medical device.
【Main Features】 1. Easy operation for measuring EO gas concentration and EO residual concentration inside the EO sterilizer. 2. Measurement of EO concentration in accordance with the sterilization process (measurement analysis). 3. Recording of EO concentration in accordance with the sterilization process, with date, time, and concentration printed by the recorder or printer. 4. Measurement of EO concentration [continuous automatic (monitoring mode) and manual (measurement instruction mode)]. 5. Ensuring safe and efficient (cost-effective) sterilization operations by measuring EO concentration. 6. Objective monitoring and evaluation of EOG sterilization, measurement of residual EO concentration and safety evaluation, and record management. 【Main Effects】 1. Compliance with the Ministry of Health, Labour and Welfare's obligation to record ethylene oxide (EO) sterilization conditions. 2. Compliance with inspections by the US FDA (Food and Drug Administration) regarding export approvals for medical devices to the United States. 3. Compliance with ISO obligations for measuring residual EO concentration and recording ethylene oxide (EO) sterilization conditions. 4. Compliance with reporting details to clients such as sterilization contractors. ■ Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932
Early detection of machine abnormalities by capturing changes in frequency rather than the magnitude of vibrations! The timing for greasing and replacing bearings is easy to understand and well-received.
"TR-COM" is a rotating machinery monitoring system that utilizes IoT to support the operation and maintenance of equipment such as pumps and air conditioning units. By installing compact sensors with built-in batteries and wireless capabilities on rotating machinery, it is possible to collect data on vibrations and temperatures, allowing for an understanding of the machine's condition. Additionally, based on the collected data, early detection of machine anomalies can be achieved, preventing troubles and losses caused by machine failures. Data management is conducted on the cloud, enabling monitoring via a web interface anytime and anywhere. 【Features】 ■ One-stop provision of sensors, applications, web interface, and maintenance ■ Automatic sending of inspection reports and anomaly detections ■ Smart log function allows for recording notes and photos during inspections ■ Awarded the 2020 TPM Excellent Product Award *For more details, please refer to the materials. Feel free to contact us as well.
TR-COM detects machine abnormalities early by "capturing changes in frequency rather than the magnitude of vibrations"!
TR-COM is a system that utilizes vibrations to monitor the condition of various rotating machinery. You can leverage the know-how that Torishima has cultivated over many years as a pump manufacturer in the operation and maintenance field. By simply installing a battery-replaceable wireless sensor, you can easily collect vibration and temperature data on your smartphone. This data is analyzed using Torishima's unique methods, allowing for early detection of changes in the machinery. Additionally, since the data is managed in the cloud, it can be monitored remotely via a web interface. The system performs frequency analysis of vibration acceleration up to 10,000Hz, enabling early detection of condition changes that traditional sensors might miss by capturing "changes in frequency rather than the magnitude of vibration." It is actively used in over 400 facilities, including power plants, manufacturing industries, and buildings. It is particularly well-received for its clarity in determining the timing for bearing grease-ups and replacements. 【Features】 ■ Provides a one-stop solution not only for sensors but also for apps, web cloud, and maintenance ■ Offers consultation for machine maintenance advice ■ Automatically sends inspection reports and abnormality detections ■ Records notes and photos during inspections with the smart log feature ■ Received the 2020 TPM Excellent Product Award
The Torishima rotating machinery monitoring system "TR-COM" is effective as a smart security technology!
The Ministry of Economy, Trade and Industry is promoting initiatives to facilitate the accurate introduction of "smart security technologies" through public-private collaboration. As part of this effort, the Smart Security Promotion Committee evaluates the validity of new security methods utilizing smart security technologies and data, and aims to share and disclose information on new technologies and smart security models to promote their introduction and expansion. This information is compiled and published as the "Smart Security Technology Catalog" by the National Institute of Technology and Evaluation (NITE). Recently, as the fourth case in the Smart Security Technology Catalog, Trishima's rotating machinery monitoring system "TR-COM" has been registered as an effective technology. 【System Features】 ■ Utilizes vibration data collected from small wireless sensors ■ Capable of early detection of abnormalities in rotating machinery ■ Can be easily retrofitted without the need for power supply or control wiring construction ■ Can capture signs of failure that appear in the high-frequency range ■ Allows for remote monitoring of machine status and data analysis using a web browser *For more details, please refer to the related links or feel free to contact us.
It is possible to check the operator's grounding status! Only the ON/OFF grounding monitoring function can be realized.
The "BON-EMS-L" is a wired type of earth monitoring system that monitors the earth status of each section of the production line. By visualizing the earth status and position of each worker, maximum monitoring is possible. It provides statistics by section of the production line, workers, and time units according to the operator's needs. It is possible to implement only the ON/OFF earth monitoring function, which can reduce costs for customers. 【Features】 ■ Ability to check the earth status of workers ■ Monitoring of the earth status of each section of the production line ■ Maximum monitoring possible through visualization ■ Provides statistics by section of the production line, workers, and time units ■ Implementation of only the ON/OFF earth monitoring function is possible, reducing costs for customers *For more details, please refer to the PDF document or feel free to contact us.
Simple IoT that dramatically improves the productivity and reliability of manufacturing equipment.
"mcframe SIGNAL CHAIN" is an IoT solution that supports the monitoring of factory equipment operations and maintenance tasks. It automatically acquires operational status from signal lights manufactured by Patlite, enabling a visualization of "the current state of the factory" through Gantt charts and Andon systems. Additionally, it supports daily inspections and repair tasks while promoting data accumulation. It also formulates preventive maintenance plans based on the accumulated data. 【Features】 ■ Visualization of operational status from signal lights ■ Support for establishing a cycle of maintenance improvement ■ Comparison and analysis of operational status to support Kaizen activities ■ Aggregation of all information related to equipment to promote utilization *For more details, please refer to the introduction URL or feel free to contact us.
A monitoring system (measuring device + application) that can measure current, power, and temperature from the distribution board of electrical equipment.
This system consists of measuring devices and applications that acquire and store real-time data such as current, power consumption, and temperature necessary for SLA management from the distribution board of electrical equipment. It also features a monitoring function that supports trend analysis and alerts users with alarms when set values are exceeded. By operating the measuring devices and applications as an integrated system, it achieves high reliability with regular monitoring while minimizing data loss. Customization for integration with existing user systems is also supported. *For more details, please refer to the PDF document or feel free to contact us. Also, please check the YouTube link below.
Visualizing the strategic story for achieving financial goals on a map!
"MapScorer" is a management support tool that enables not only company-wide sharing of corporate strategies but also monitoring the achievement status of KGI (Key Goal Indicator) and KPI (Key Performance Indicator) in a comprehensive overview for realizing visual management. It automatically aggregates on-site information collected from the Visual Management System (VMS) and displays various management indicators in an easily viewable "cockpit," the "visualization map" which serves as the framework for visual management, and in the "scorecard." [Features] ■ Visualizes and monitors your company's strategic strengths in an optimal form ■ Responsive design ■ Automatic data aggregation *For more details, please download the PDF or feel free to contact us.
Air sampler for PM-2.5 collection adapted for rapid measurement and easy component replacement.
The "DF-PM2.5D" is a PM-2.5 air monitoring system designed for continuous sampling even without an operator present. It employs a brushless motor with speed control, making flow adjustment easy. The achievable flow rate through the filter paper depends on the air permeability of the filter paper measuring 20.3×25.4 cm (8"×10"). 【Features】 ■ Built-in impactor (<2.5μ) ■ High-brightness LED display ■ Flow rate and cumulative volume displayed in standard conditions ■ Automatic flow control ■ Configurable measurement units, etc. *For more details, please download the PDF or feel free to contact us.
