Surface treatment Product List and Ranking from 288 Manufacturers, Suppliers and Companies

[Blog] Surface Treatment of Chip Saws

I purchased the item through a different route and checked the actual condition of the painting (printing)!

The other day, I was asked by a hardware store that has entrusted me with some grinding products, "Can the new white-coated chip saw from Makita be ground?" According to the hardware store, "I've heard it's quite good, but if it can't be ground after selling it, that would be a problem..." I looked at the brochure and replied on the spot, "Grinding itself is not an issue, but I'm concerned about the 'special coating' on the surface." I was worried about what it was like and whether it could actually be ground, so I purchased a sample through another route to check the condition of the coating (printing). It seems to be called "shark skin." *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.*

Company：大府精巧
Price：Other

Processing Contract
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[I-NIX Processing Product Test Case] Burr Prevention for Pressed Parts

Increased toughness and the friction coefficient reduced to less than half! Introducing our measures against burrs in pressed parts!

In the press processing of oil rings, the height of burrs has become a problem. When the height reaches a certain level, it is judged as a defective product, and it has been determined that preventing the burrs from becoming too high leads to longer lifespan. Currently, the existing products require regrinding after 300,000 shots, which poses a lifespan issue. By performing "I-NIX treatment," toughness is increased, and the friction coefficient is reduced to less than half, preventing wear phenomena and successfully extending lifespan. The lifespan has increased to six times (1.8 million shots), resulting in favorable outcomes. [Case Summary] ■ Issue: The current products require regrinding after 300,000 shots. ■ Results - Press mold hunch made of ultra-fine particle carbide lasts for 300,000 shots (standard product). - By applying "I-NIX treatment" to the above tool, it now lasts six times longer (1.8 million shots). *For more details, please refer to the PDF document or feel free to contact us.

Company：ギバル
Price：Other

Surface treatment contract service
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Research Material] Global Market for Medical Oxygen Gas Cylinders

World Market for Medical Oxygen Gas Cylinders: 10L, 40L, 50L, 100L, Others, Emergency Room, Operating Room, Respiratory Department, Home Use, Others

This research report (Global Medical Oxygen Gas Cylinders Market) investigates and analyzes the current state and future outlook of the global market for medical oxygen gas cylinders over the next five years. It includes information on the overview of the global medical oxygen gas cylinder market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the medical oxygen gas cylinder market include 10L, 40L, 50L, 100L, and others, while the segments by application cover emergency rooms, operating rooms, respiratory departments, home use, and others. The regional segments are divided into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa to calculate the market size for medical oxygen gas cylinders. The report also includes the market share of major companies in the medical oxygen gas cylinder sector, product and business overviews, and sales performance.

Company：マーケットリサーチセンター
Price：Other

Other services
Surface treatment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Research Material] The Global Market for Anodized Aluminum

World Market for Anodized Aluminum: Nanoporous Type, Porous Type, Alloys, Microelectronics Industry, Optoelectronic Applications, Coatings ...

This research report (Global Anodized Aluminium Market) investigates and analyzes the current state and outlook for the global anodized aluminum market over the next five years. It includes information on the overview of the global anodized aluminum market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the anodized aluminum market focus on nanoporous types and porous types, while the segments by application cover alloys, the microelectronics industry, optoelectronic applications, coatings, and others. The regional segments calculate the market size of anodized aluminum by dividing it into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa. It also includes the market share of major companies in the anodized aluminum sector, product and business overviews, and sales performance.

Company：マーケットリサーチセンター
Price：Other

Other services
Surface treatment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Micromax Lead-Free Conductor <Sintered Type>

We offer a variety of conductive pastes using various conductive components for automotive applications!

We handle Micromax "Lead-Free Conductors <Fired Type>" related to automotive applications. These can be used for integrating electronic circuits for vehicles onto substrates made of metals, polymers, glass, ceramics, and more. We offer a variety of conductive pastes using different conductive components such as silver conductors, silver/platinum conductors, silver/palladium, gold, and copper for various applications. 【Product Lineup (Partial)】 ■LF131 ■LF100 ■LF171 ■THR61 ■5775 ■5780R ■THR35 ■LF911 *For more details, please refer to the PDF document or feel free to contact us.

Company：Celanese Electronic Material K. K.
Price：Other

Other Auto Parts
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tashiro Electric Industry Co., Ltd. for Automotive Wiring

Special plating to improve the performance of automotive components.

In the automotive industry, high reliability and durability are required for wiring applications. Particularly in environments exposed to vibrations and temperature changes, corrosion and wear at the connection points of the wiring can become problematic, potentially leading to decreased product performance and failures. Tashiro Electric Industry Co., Ltd.'s special plating enhances corrosion resistance, wear resistance, and conductivity, addressing these challenges. 【Usage Scenarios】 - Automotive wiring connectors - Wiring in the engine compartment - Wiring for electrical components inside the vehicle 【Benefits of Implementation】 - Improved reliability of wiring - Extended product lifespan - Cost reduction

Company：NPO諏訪圏ものづくり推進機構
Price：Other

others
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

KOK Komatsu Electric Chemical Industry Co., Ltd.

We have a processing system that can meet all needs, from mass-produced items to prototypes and custom products, providing various metal surface treatments that satisfy our customers.

We support mass production and small lots for high-precision and high-corrosion-resistant hard chrome plating of large parts (up to 10 tons) for construction machinery and industrial machinery, as well as various surface treatments for small and lightweight parts. We also explore special surface treatments such as non-metallic materials and composite plating. Our main products include zinc plating, anodizing, electroless nickel plating, and nickel-chrome plating.

Company：石川県産業創出支援機構
Price：Other

others
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment using a multi-atmosphere furnace for metal processing.

Achieving targeted surface chemistry in a short cycle through wet atmosphere sintering that is not constrained by gas types.

In the metal processing industry, surface treatment requires precise atmosphere control to enhance the durability, corrosion resistance, and functionality of products. In particular, reaction control at high temperatures and uniform surface modification are critical factors that influence product quality. Conventional firing furnaces have limitations in the types and control of atmosphere gases, leading to challenges in reproducibility and efficiency. Multi-atmosphere furnaces address these issues and cater to diverse surface treatment needs. 【Application Scenarios】 - Prevention of oxidation in metal parts - Surface hardening treatment - Pre-treatment for coating 【Effects of Implementation】 - Improvement in the quality of surface treatment - Reduction in processing time - Adaptation to various gas atmospheres - Achievement of highly reproducible treatments

Company：サーモニックENG
Price：Other

Industrial Furnace
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment technology: "Surface treatment with excellent non-stick and release properties."

Introducing a surface treatment technology that excels in "non-adhesive" and "release properties," effective for applications where you want to reduce product release and adhesion! It simplifies equipment cleaning.

"Non-stick" refers to the property of being easy to release from strongly adhesive substances, meaning it does not adhere or adheres very weakly. Surface treatment technologies that utilize such properties are effective in improving release properties, reducing adhesion, and simplifying cleaning. [Selected Surface Treatments (Partial)] ■ Release properties, high hardness, dimensional stability (durable parts, molds) - Bi-Coat ■ Resin release at high temperatures - FSR Coating ■ Prevention of adhesion of high-viscosity substances - Adhesive Release Coating - CTT Fabric Sheet - MRS Coating (Silicone-based Coating) *For more details, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment technology: "Functional surface treatment with excellent wear resistance."

We will introduce a surface treatment that excels in "wear resistance," suitable for countermeasures against "rough wear" and "thrust wear" among various types of wear.

Wear refers to the process in which one or both of two objects in contact and moving against each other become abraded. There are two main types of wear that can occur in manufacturing environments. One is "rough wear," which occurs when surfaces are abraded and eroded due to contact with rough surfaces or particulate matter. The other is "thrust wear," which happens when surfaces adhere due to frictional heat and are worn away by the opposing material. The appropriate surface treatment varies depending on the type of wear. [Selected Surface Treatments] ■ Wear Resistance (Rough Wear) - Urethane Coating ■ Wear Resistance (Thrust Wear) - Bi-Coat *For more details, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface Treatment "Super TP Series"

A fluorine coating with excellent release properties that hardly sticks to duct tape! It solves problems in food transport lines and resin film manufacturing lines.

The surface treatment "Super TP," optimal for releasing adhesives, improves the "release ease" of adhered materials by reducing the contact area through a technology that creates a convex surface (roughening) on the coating. This achieves a level of non-stickiness that cannot be obtained with conventional Teflon coatings or fluororesin coatings. It demonstrates remarkable release properties (anti-adhesion) even with highly adhesive substances such as unvulcanized rubber, adhesive tape, and hot melt adhesives. If you have been struggling with transport issues or molding defects caused by adhesive materials, or if you have requests for reducing maintenance on molds, transport chutes, or rolls, please feel free to consult with us. ■ Features - Non-stickiness and release properties that surpass fluororesin coatings - Anti-adhesion to adhesive materials like molten resins and adhesive tapes - Slip and lubrication through a special technology that roughens the coating surface - Compatible with silicone-free applications (TP series, Super TP series) - Smooth release - Slippery (lubrication) (TP series) *For more details, please refer to the catalog or contact us directly.

Company：吉田ＳＫＴ
Price：Other

Coating Agent
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment with excellent electrical properties.

Fluororesin is a high-performance insulating material that not only has high insulation properties (high resistivity) but also possesses an extremely low dielectric loss tangent tanδ.

Fluororesin has high insulation properties, with a volume resistivity of Ω·cm or more, and its arc resistance is more than three times that of general-purpose resins, making it superior. Compared to other resins, it is stable in various electrical environments. On the other hand, the coating surface is prone to charging, which can lead to issues such as the adhesion of foreign substances due to electrostatic attraction and electrostatic discharge hazards. In such cases, you can select fluororesin coatings with antistatic functions. [Preferred Surface Treatments] ■ Electrical Insulation - Fluororesin Coating (Teflon Coating) ■ Antistatic Properties - Safron - Safron AP+ *For more details, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment with excellent plasma resistance, heat resistance, and electrical insulation.

It lasts long without wearing out from friction heat, and the coating effect continues!

PBI (Polybenzimidazole) and PI (Polyimide) possess the highest heat resistance among super engineering plastics, and they are also ultra-super engineering plastics with excellent electrical insulation properties. At Yoshida SKT, we have developed a technology to apply PBI and PI, which have traditionally been used as plastic molded products, as coatings on metal products and other surfaces. This coating process allows us to enjoy the excellent functions and properties of super engineering plastics while also gaining advantages in terms of cost and durability that molded products do not offer. *For more details, please refer to the catalog or contact us directly.

Company：吉田ＳＫＴ
Price：Other

others
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment - Optimal surface treatment for blade release.

Even with strong double-sided tape, the peeling force is almost zero! It can maintain water repellency, oil repellency, and slip resistance even after solvent cleaning!

The mold release silicone suitable for blade release coating (MRS series) demonstrates excellent release properties against sticky substances and adhesive tapes, achieving top-level solvent resistance, film hardness, and heat resistance in surface treatment. ■Features It contributes to the efficiency of cutting operations and increases productivity. The release properties remain effective even after cleaning with solvents, ensuring long-lasting performance. Test results show overwhelmingly lower values compared to SUS304 and Teflon coatings. <Reasons to Choose This Product> - Reduces sticking when cutting adhesive materials - Expected to improve productivity in cutting processes - Release effect remains effective and long-lasting even with solvents *For more details, please download the materials or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is melting? An explanation of one type of resin melting, heat plate melting, and non-adhesive surface treatment.

We will also introduce non-stick surface treatments that are essential for solving the disadvantages of various types and methods of melting and heat plate melting.

■What is Resin Welding Resin welding is one method of joining resins using heat. ■Types and Methods of Welding - Ultrasonic Welding A method that uses ultrasonic vibrations for joining. - Vibration Welding A method that uses frictional heat generated by vibrations for joining. - High-Frequency Welding A method that uses self-generated heat from high frequency for joining. - Laser Welding A method that generates heat using laser light for joining. - Heat Plate Welding A method that melts materials using a heated plate for joining. ■Advantages and Disadvantages of Heat Plate Welding Heat plate welding can accommodate a wide range of part sizes and can securely weld even three-dimensional shapes, making it suitable for joining components that require airtightness. On the other hand, it cannot be used if electronic components are present, and there are disadvantages such as excess material when welding, resin sticking to the heater, and stringing. ■Surface Treatment to Prevent Resin Sticking and Stringing to the Heat Plate One method to prevent resin sticking to the heat plate and stringing, which are among the disadvantages, is surface treatment. For more details on surface treatment, please download the materials or contact us.

Company：吉田ＳＫＴ
Price：Other

Resin mold
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is poor release type? Methods for improvement and ways to reduce the use of release agents.

What is release failure during molding? We will introduce useful information for when you want to reduce product release applications and adhesion.

"Release failure" refers to the situation where materials do not easily separate from the mold during the molding or processing of products, leading to defects or damage. Such failures can reduce product quality and potentially increase costs. **Ways to Improve Release Failure** - **Use of Release Agents** By selecting the appropriate release agent and using the right amount, materials can be made to separate easily from the mold. - **Design Improvements** Improving the design of the mold can make it easier for materials to release from it. - **Material Changes** Choosing suitable materials, such as those with good release properties, can help improve release failure. - **Improvement of Molding Conditions** Enhancing molding conditions can lead to improvements in release failure. - **Regular Maintenance** Conducting regular maintenance on molds and machines can prevent troubles during molding. - **Utilization of Surface Treatments** Applying non-stick (release) surface treatments to molds can improve molding troubles, reduce the use of release agents, and decrease the frequency of mold maintenance. By appropriately combining these methods, improvements in release failure can be expected.

Company：吉田ＳＫＴ
Price：Other

Processing Contract
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Presentation of Materials] What are the methods to improve the productivity of automotive parts?

We introduce functional surface treatments with excellent properties such as release, insulation, and slip, which are adopted in new energy development fields such as electric vehicles and fuel cell vehicles.

Automotive parts number in the tens of thousands, and their manufacturing requires various facilities. Among them, resins, rubber, and elastomers have characteristics that make them easy to mold and are used in many exterior and interior parts. On the other hand, these materials can be difficult to handle due to their tendency to stick during molding and their low slip during transportation. Typically, designs are made to prevent troubles by innovating the shape and material of the equipment and molds, as well as the materials themselves, but issues can arise during prototyping or unexpected troubles can occur. Such troubles can be resolved through surface treatment. Surface treatment can change the surface characteristics of the base material, providing properties such as being less sticky, more slippery, and more resistant to wear. Below, we introduce surface treatments that have numerous achievements in the automotive parts field.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is stainless steel insulation surface treatment?

Stainless steel is resistant to rust and is used for various applications. Here, we will introduce methods to impart insulation properties to stainless steel.

■Corrosion and Insulation of Stainless Steel Stainless steel is known for its resistance to rust, but it can experience galvanic corrosion between dissimilar metals. By coating it with a highly insulating resin to eliminate electrical contact, galvanic corrosion can be prevented. ■Highly Insulating Resins In general, plastics (resins) do not conduct electricity. Among them, resins such as fluororesin and polyimide are particularly excellent in electrical insulation and heat resistance, making them suitable for various applications. ■Cautions for Insulating Surface Treatments By insulating the surface of stainless steel with coatings like fluororesin, it is possible to maintain a state where electricity does not flow through the stainless steel surface. However, such coatings may require high-temperature curing and must be free of pinholes. Therefore, considerations regarding the design of the base material (component) and film thickness are necessary, and it is appropriate to consult a specialized contractor. *For information on the electrical properties of fluororesins, please click "PDF Download" or feel free to contact us. If you are considering an insulating coating for stainless steel, please do not hesitate to contact Yoshida SKT.

Company：吉田ＳＫＴ
Price：Other

Other surface treatment equipment
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Sample Presentation】Surface treatment that can solve the challenges of cutting adhesive materials.

What is a non-stick coating that extends the maintenance cycle of cutting blades by 20 times? *Currently offering a collection of case studies on surface treatments that improve adhesive troubles with cutting tools.

Solve the challenges that arise when cutting adhesive materials like adhesive tape and labels! ■ Adhesive Issues - Material adheres to the blade, resulting in inaccurate cuts - Frequent cleaning of the blade is required Non-adhesive coating on blades contributes to increased productivity, cost reduction, and improved safety. We also have coating samples available. Please feel free to apply. Click the link to apply for case studies and trial sets!

Company：吉田ＳＫＴ
Price：Other

Processing Contract
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment to ensure smooth operation of the automatic packaging machine.

A must-see for those considering surface treatment for automatic packaging machines!

**Benefits of Surface Treatment for Automatic Packaging Machines** - Improved maintainability - Smooth transportation of products - Enhanced wear resistance - Contributes to the smooth movement of various components Our original surface treatment, 'BICOAT', provides these benefits to automatic packaging machines. We are currently offering a trial set to experience "high durability, release, and slip coating." Please check the link below to apply. *For more details, please download the materials or contact us through our website.*

Company：吉田ＳＫＴ
Price：Other

Other molds
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment for blade release in the packaging industry

You can cut duct tape cleanly! Solve the decrease in work efficiency caused by adhesion.

In the packaging industry, issues such as decreased work efficiency and adhesion to products related to the handling of tapes and adhesives during packaging operations have become challenges. In particular, when using tapes with strong adhesive properties, it is common for them to stick to cutting tools or work surfaces, which can lead to delays in work and a decline in product quality. Our knife release surface treatment addresses these issues and contributes to improved work efficiency and product quality. [Usage Scenarios] * Sealing cardboard boxes * Label application * Cutting process of adhesive tape [Benefits of Implementation] * Reduction in work time * Prevention of adhesive residue on products * Improved maintainability of cutting tools For more details, please check the case study PDF or contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical Data Hardness Conversion Table

Here is the technical data for the hardness conversion table.

At Kyushu Denka, we perform surface treatment of various metals and have established a research and development department to flexibly respond to advanced order requirements through multifaceted technical research. The specialized staff who work diligently in research here are an important presence that supports the company from a technical standpoint. We continue to challenge ourselves in pursuit of cutting-edge technology that leads the plating industry. [Contents] - Vickers hardness (load 50kg) - Brinell hardness 10mm steel ball 3000kg For more details, please contact us or download the catalog.

Company：九州電化
Price：Other

Surface treatment contract service
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical Data: Difficulty of Soldering Based on Metal Material

Here is the technical data on the difficulty of soldering based on the type of metal.

At Kyushu Denka, we perform surface treatment of various metals and have established a research and development department to flexibly respond to advanced order requirements through multifaceted technical research. The specialized staff who work diligently in research here are an important presence that supports the company from a technical standpoint. We continue to challenge ourselves in pursuit of cutting-edge technology that leads the plating industry. [Contents] - Inorganic - Organic non-resin type - Resin type WW rosin / active rosin For more details, please contact us or download the catalog.

Company：九州電化
Price：Other

Surface treatment contract service
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We accept processing services for insulation and fluorine coating prototypes and small lots.

We respond to our customers' "wish it would be nice to have." Contract processing using our unique electrostatic painting line.

We accept processing services for prototypes, small lots, and other tasks related to insulation and fluorine coating.

Company：シミズ
Price：Other

Processing Contract
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment of magnesium alloys

Surface treatment for magnesium alloy for exterior casings of cameras, computers, and more!

We would like to introduce "Surface Treatment for Magnesium Alloys." "Chemical treatment" improves paint adhesion and provides rust prevention, while "anodic oxidation treatment" offers superior corrosion resistance and a texture that minimizes the visibility of scratches and patterns. If you are having trouble with surface treatment, please feel free to contact us. 【Features】 <Anodic Oxidation Treatment> ■ Superior corrosion resistance and texture compared to chemical treatment (minimizes visibility of scratches and patterns) ■ Chromium content: None ■ Hardness: Hv400 or higher ■ Conductivity: Insulating ■ Salt spray test: 300 hours ■ Corrosion area: 0.1% or less (JIS RN 9 or higher) *For more details, please refer to the PDF document or feel free to contact us.

Company：新中央工業
Price：Other

Surface treatment contract service
Processing Contract
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Achieving hydrophilization of Teflon (PTFE)! [*Video of the coating test now available!]

Achieving painting on Teflon, which is usually difficult to bond! Free evaluation test data available!

The dry process of plasma surface treatment brings special processing to the surface of materials and is attracting attention from various fields as a next-generation surface treatment technology aimed at enhancing product functionality and adding high value. With the plasma technology from Kai Semiconductor, it has become possible to paint, print, and bond to Teflon (PTFE), which was previously considered difficult. In vacuum plasma treatment, the water contact angle changes from 102 degrees to 47 degrees. The tensile shear adhesive strength increases from 370 kPa to 1100 kPa, achieving three times the strength! In our catalog, we introduce various examples of treatments not only for plates but also for structures such as tubes, utilizing batch processing vacuum plasma and continuous processing atmospheric pressure plasma. *We are currently offering free evaluation test data for pre-treatment of painting and bonding on Teflon (PTFE)! Please download it from the form below for more details. *We are also sharing videos of the painting tests. Click below to view more details.

Company：魁半導体
Price：Other

Other semiconductors
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High hardness and excellent heat resistance ceramic coating surface treatment.

The ceramic coating "DK-coat Infinity" is a product with a heat resistance of up to 450°C.

The "DK-coat Infinity," a ceramic coating surface treatment with excellent high hardness and high heat resistance, is made from fine ceramics and inorganic coatings used as raw materials. It possesses non-stick properties equivalent to fluoropolymer coatings, along with heat resistance and a hard coating that fluoropolymers cannot match. 【Features】 ■ Heat resistance up to 450°C ■ Non-stick properties equivalent to fluoropolymers ■ Steam resistance that prevents water vapor penetration ■ Thermal conductivity that can be expected to save energy ■ Safety with no harmful substances generated ■ Wear resistance with pencil hardness of 9H *For more details, please download the PDF document or feel free to contact us.

Company：YMM コーティング事業部
Price：Other

Surface treatment contract service
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Effectively absorb and transfer large amounts of heat! 'Cold Plate/Cooling Plate'

For cooling lithium-ion batteries for BEVs, IGBT modules, and modules for autonomous driving systems.

Our "Cold Plate" is designed for use in various situations where it is necessary to efficiently absorb and transfer large amounts of heat. To accommodate applications with limited space, we pursue high thermal conductivity and a compact design. The flow paths for heat transfer fluids can be processed into various shapes and sizes through different manufacturing methods. The materials used are aluminum or copper, which can be processed into thin forms, contributing to weight reduction. Please utilize it for the development of temperature-sensitive products such as lithium-ion batteries. 【Main Manufacturing Methods】 ■ Friction Stir Welding (FSW): Allows for high fatigue strength and minimal distortion in joints. ■ Vacuum Brazing: Suitable for small quantities, enabling complex joint shapes and multiple joint locations. ■ Metal Pipe Embedding: Cost-effective for mass production. ■ Metal Diffusion Bonding ■ Gundrilling *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

Company：CMインダストリー
Price：Other

Other electronic parts
Cooling system
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment of springs (plating and painting)

Even with stainless steel, surface treatment is possible if you have requests regarding lubrication, appearance, etc.

We will introduce the topic of "Surface Treatment of Springs (Plating and Coating)." Surface treatment is essential for springs made from steel-based materials. After all, iron is prone to corrosion, and it is not uncommon for it to lead to breakage. While inexpensive treatments may involve applying anti-corrosion oil, there are concerns about chemical attacks, and the corrosion resistance may not be sufficient. Even with stainless steel, surface treatment is possible if there are requests for lubrication, appearance, etc. Additionally, there are various treatments for springs, such as burr removal and improving fatigue strength. Please refer to the table of recommended surface treatments from our company. *For more details, please refer to the PDF materials or feel free to contact us.*

Company：理研発条工業
Price：Other

Surface treatment contract service
Surface treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment Product List and Ranking from 288 Manufacturers, Suppliers and Companies | IPROS GMS

Surface treatment Manufacturer, Suppliers and Company Rankings

Surface treatment Product ranking