Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
1561～1590 item / All 3762 items
Matt switch 500×600mm DMS-56
■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)
The text in the room appears large and in green. Brightness is adjustable.
■Main Features ● When the switch is pressed, the occupancy lamp lights up, and it outputs 2 contact points accordingly. Pressing it again turns it off and reverses the 2 contact point output. It can be incorporated into a living safety notification system for use. ● Brightness can be switched between two levels. ● Original design with colors that are easy for elderly individuals with glaucoma to see (when lit). ● You can freely write on the nameplate (e.g., "Lights on when occupied," "Press," etc.). ● Suitable for a single switch box.
A human detection switch that detects the direction of the human body and vehicles. The industry's first one-body type. Can be installed indoors and outdoors!
■ One-body Type Direction Detection Switch Unlike existing direction detection systems, this is a one-body type that performs direction detection and output operation with a single unit. It enables direction detection with one unit through two detection zones. ■ Capable of Detecting Pedestrians and Low-speed Vehicles It can detect pedestrians and low-speed vehicles, making it suitable for the following applications: ● Access management at entrances and exits ● Gate management for parking lots and various facilities ● Security and safety at construction sites ● Notification for restricted areas *Note: Detection may not occur for certain vehicles. ■ Activation Switch for Lighting, Rotating Lights, and Alarms With a high-capacity contact output, it can be used as an activation switch for lighting, rotating lights, alarms, or cameras. ■ All-weather Switch With a rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Additionally, it can be mounted on ceilings, walls, poles, etc., allowing for flexible installation locations. ■ User-friendly Design ● The output operation time can be adjusted between approximately 5 seconds to about 5 minutes. ● The detection direction can be switched using the switch.
This is an infrared beam switch with a pressure-resistant explosion-proof structure that can be used in hazardous locations of Class 1 and Class 2.
■ High explosion-proof performance Can be used in locations handling hazardous materials such as chemical plants, filling machine manufacturers, and explosives factories. ■ Strong aluminum case adopted This is a newly designed aluminum case tailored to the product. Additionally, it meets the waterproof grade of IP65. ■ High-performance specifications The power supply voltage can accommodate AC/DC 24–240V. The output is c contact with AC 250V・1A/DC 30V・1A (resistive load), and it can detect over a long distance of 30m. ■ Operation indication The sensor's operation indication can be confirmed from the front. Receiver: Power indicator light - red, Unstable indicator light - green Emitter: Power indicator light - red ■ Cable gland compliant with 2008 guidelines We use a pressure-resistant explosion-proof structure packing type cable gland for cable wiring work, making installation, maintenance, and repairs easier compared to conventional metal conduit wiring. ■ Sealed interior Manufactured in a highly airtight structure and in a regulated indoor environment, so there is no fogging inside.
It can be easily installed with a super compact controller and a detachable connection cable.
■Realization of compact controller This is a small controller with dimensions W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off during detection)
The controller unit has been miniaturized. The wire can be freely cut, and installation is easy with connector wiring.
■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)
The controller section has been miniaturized. The wire can be cut freely, and installation is easy with connector wiring.
■Two power sources according to usage You can choose from two types of power sources, 100V and 200V, depending on the situation of the electric shutter being installed. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response speed switching function included In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function to prevent light-blocking operation by the edge of the electric shutter). ■Slim sensor head can be installed with one touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● High reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: always on, turns off when detecting)
Equipped with a built-in heater sensor head to reduce malfunctions caused by condensation, freezing, and snow accumulation.
■Features ● Reduces malfunctions caused by "condensation or fogging in low-temperature warehouses or freezing warehouses" or "freezing or snow accumulation in cold regions." ● The sensor head is waterproof, allowing installation in places prone to condensation, such as low-temperature warehouses, freezing warehouses, or semi-outdoor areas. ● The design minimizes heat transfer from the heater to the sensor mounting plate. ● Detection range of up to 10 meters. ● High-reliability design that is hardly affected by external light interference, such as sunlight. ● Equipped with an operation indicator light for convenient operation confirmation (green LED: always on, turns off during detection). ● Compact controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside door engines. ● Connection cables for both the light-emitting and light-receiving parts can be freely cut according to installation conditions. ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance.
Beam switch with a noren design! You can freely change the angle of the beam.
■Operating Principle The infrared light, modulated by the light-emitting sensor, is continuously emitted, and the light-receiving sensor captures the weak infrared light that reflects off objects. The controller amplifies this input signal and performs synchronous detection to monitor the presence of reflecting objects. ■Main Features ● The angle of the sensor body can be adjusted arbitrarily, allowing for a preferred reflection area. ● The door remains open while receiving reflected infrared light, ensuring safety. ● The light-emitting and light-receiving sensors are integrated, making wiring simple. ● It operates stably without being affected by disturbances from sunlight or lighting.
It's hygienic because you don't touch the switch directly! In addition to being adjustable to face forward and downward, the beam switch can also be adjusted left and right.
■Features ● It outputs signals by waving your hand without touching the main unit, making it ideal for hygienic environments such as food and pharmaceutical factories and hospitals. ● The angle of the beam switch can be adjusted not only to face forward and downward but also to the left and right. ● The main unit is white, giving it a clean appearance, and the arrow mark clearly indicates where to wave your hand. ● The IP55 design ensures waterproof and dustproof construction. ● It can be mounted on a single switch box (pitch 72.5–83.5mm). ■ Three patterns for the angle of the beam switch: front, downward, and left/right The position of the traditionally fixed beam switch can be changed. ■ White base color enhances cleanliness The main unit is white, enhancing cleanliness and blending well in any environment. ■ The area to wave your hand is prominent The arrow mark makes it easy to identify where to wave your hand.
Non-contact switch, exposed type, PF-R1
■Features ● The door opens by waving your hand without touching the main unit, making it ideal for places where hygiene is a concern, such as food processing facilities and hospitals. ● Compatible with single-unit recessed switch boxes.
Three-dimensional area stationary detection type safety switch for automatic doors.
■Features ● This safety sensor is ideal for ensuring safety at circular doors due to its three-dimensional area. ● The microcontroller automatically determines the surrounding environment and the sensor installation height through initial settings, establishing a stable area. ● Radio waves, wind, external noise, and temperature changes are all controlled by the microcontroller for optimal operation at all times. * Please note that the monitoring operation starts with an external activation input (non-voltage contact), so it cannot be used as a security sensor or an automatic door activation sensor. * If there are uneven walls or similar features in the installation environment, reflections from the walls may occur, potentially reducing sensitivity.
Three-dimensional area stationary detection type safety switch for automatic doors.
■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the height of the sensor installation to establish a stable area. ●Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate false triggers. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or an automatic door activation sensor. *Be cautious of the installation environment; if there are uneven walls nearby, reflections from the walls may occur, potentially reducing sensitivity.
The automatic door sheet shutter is opened and closed with a rope-type switch. (Ideal for factory gates, etc.)
■Features ● Waterproof type ● Cord length: 3m ● No-voltage relay contact (a contact) AC/DC 30V, 0.5A or less ● Installation location: Indoor / Semi-outdoor
![Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R](https://image.mono.ipros.com/public/product/image/00b/2000733845/IPROS90458525813683161390.jpeg?w=280&h=280)
Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R
■2CH3 Point System The transmitter is a 2CH 3-point system. The transmitter allows you to select the display of "Open, Stop, Close" and "1, 2, 3" with the included sheet. By using them individually, control of up to 6 locations is possible. ■Reliable Reach Distance Maximum reach distance of approximately 40m with a specific low power. ■Output Switching Function By changing the settings of the receiver, it can be switched between one-shot output and latch output. ■Number of Registrable Units The receiver can register up to 100 IDs. ■Easy Installation The receiver has a compact design and comes with an antenna with a 4m cable, making it suitable for any installation location.
Magnet switch equipped with a loop check tester hole.
■Features ● Easy loop checking with the tester hole on the switch cover. ● Includes a spacer to eliminate misalignment (step) between the switch and magnet parts, a stopper to protect the magnet part when the window is opened, and mounting screws. ● Available in other colors such as brown and white, allowing color selection based on installation location. ● There is also a set that includes only the magnet and switch parts (MG-103). *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.
Magnet switch equipped with a loop check tester hole.
■Features ● Easy loop checking with the tester hole on the switch cover. ● Available in gray and white, allowing color selection based on installation location. ● Spacer and stopper sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.
Magnet switch equipped with a loop check tester hole.
■Features ● Easy loop check can be performed with the tester hole on the switch cover. ● Available in other colors such as brown and white, allowing you to choose based on the installation location. ● Spacer and stopper are sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.
Magnet switch equipped with a loop check tester hole.
■Features ● Easy loop checking with the tester hole on the switch cover. ● Available in gray and brown, allowing color selection based on installation location. ● Spacers and stoppers are sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use spacers or similar items to install it away from the magnetic material to ensure the set distance.
Thickness of the magnet part is 2mm!! Achieving ultra-thin and low cost.
■Features ● The magnet switch is slim (2mm), making it suitable for cross doors. ● Double-sided tape is attached to the magnet part for installation assistance. ● The operating distance is less than 15mm. ● Available in four colors: Gray (G), Brown (B), Black (BL), and White (W), allowing selection based on the design of the installation location. ● Loop checks can be easily performed through the tester hole in the switch cover. ● No stopper is required. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar to install it away from the magnetic material to ensure the set distance.
It is a recessed magnetic switch that can detect the opening and closing of doors while maintaining aesthetics.
■Features ● It is embedded in the door and frame that you want to monitor, with only the surface of the plate exposed, so it does not draw attention to the door's security. ● The aluminum plate has an anodized finish, providing excellent corrosion resistance and a beautiful appearance. ● The switch part is terminal type, making wiring connections easy. *Note: The door and frame to be installed require processing for embedding.*
The smallest in the series! An ultra-compact magnetic switch that can be installed in a small space.
■Features ● Achieves ultra-compact size with a volume ratio of 1/8 (compared to MG-103), allowing for inconspicuous installation in various locations. ● Can be fixed with double-sided tape on flat surfaces, and with thin nails on uneven surfaces or easily peeling painted surfaces. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use spacers or similar to install it away from the magnetic material to ensure the set distance.
Door open/close signal magnet switch, outdoor, ODC-59B
For more details, please refer to the basic information.
Leave the design, development, and assembly manufacturing of rotary switches to us!
This is our original rotary switch. It allows for three stages of switching from 0 notch to 3 notches, and the notches are in a back-and-forth type: "0→1→2→3 and 3→2→1→0."
Automatically detects ink levels! Reduces the hassle of refilling.
This product is a liquid level sensor that detects the remaining amount of ink refill liquid. In devices that require ink refills, such as inkjet printers and ink cartridges, it automatically notifies when the remaining amount is low, preventing printing stops or work interruptions due to running out of ink. 【Product Features】 - It is a resin-made switching switch with a stroke of 5mm that turns ON when rising and OFF when falling. - It accurately detects the remaining amount of ink refill liquid. 【Usage Scenarios】 - Inkjet printers - Ink cartridges - Devices that require ink refills - Preventing printing stops or work interruptions due to running out of ink - Automating the task of checking ink levels 【Benefits and Results of Implementation】 - Prevents printing stops or work interruptions due to running out of ink, improving operational efficiency. - Contributes to alleviating labor shortages by automating the task of checking ink levels. - Reduces waste of ink, leading to cost savings.
Tuning fork level switch - high functionality/high temperature and pressure type! Adjustable switching delay for turbulent flow or discharge applications.
The "Rosemount 2130" is a tuning fork level switch designed for operation in the range of –70 to 260°C (–94 to 500°F). It is designed using the principle of a tuning fork, where the fork vibrates at its natural frequency due to piezoelectric crystals. The changes in this frequency are continuously monitored. Additionally, the electronic device features self-checking and condition monitoring, with a heartbeat LED that displays information regarding status and instrument integrity. 【Features】 ■ Proven FMEDA suitable for SIL2 safety increased type ■ "Fast Drip" fork design - particularly reduces response time for viscous liquids ■ Options for normal area, explosion-proof/fireproof, and intrinsically safe explosion-proof ■ Adjustable switching delay to prevent malfunction in turbulent or discharge applications ■ Fork shape optimized for hand polishing to meet hygiene requirements *For more details, please refer to the PDF documentation or feel free to contact us.
The Rosemount 3408 radar level gauge is an FMCW radar suitable for level measurement and overfill prevention in many industries, including chemicals.
Smart features save time, maximize operational efficiency, eliminate troubles, and simplify commissioning, operation, and testing. Smart diagnostics enable proactive maintenance planning, and Bluetooth connectivity makes configuration and maintenance easy. It is possible to perform manual or automatic verification at regular intervals from the control room without interrupting the process. Using onboard capabilities, proof tests can be conducted both on-site and remotely. To be used in safety-critical applications, it has been tested in accordance with NAMUR standards and has obtained third-party certification compliant with IEC61508.
Is that renewal really necessary? Carburetors provide everyone with the freedom to choose their equipment.
Our company primarily sells refurbished products (Refurbish) of various devices such as network equipment (switches, routers), servers, and storage. *We also have some new products available. *Standard one-year warranty (advance replacement send-back) included. We conduct a consistent process from procurement to sales through our unique channels outside the manufacturer's distribution. Therefore, even for products that are out of stock in Japan, if there is stock available overseas, Carvature will sell those products. You can procure overseas stock without the need for import procedures. *Some products may require certain procedures. The advantages of refurbished products are: - Lower prices - Availability of end-of-sale products (EOSL) - Immediate usability after delivery **We handle compatible products under our own (Carvature) brand** Carvature offers compatible products (new) under its own brand. We have optical transceivers up to 100GB, as well as HDD/SSD, Twinax/DAC, and other cables. Carvature provides freedom in hardware selection for companies. We stop unnecessary upgrades and support the extension of a stable current state.
Supplies up to 30W per port, reducing the hassle of power installation!
The "TSW200" is an industrial Ethernet switch equipped with two SFP ports for long-distance optical fiber communication and eight Gigabit Ethernet ports, compliant with the IEEE802.3af and IEEE802.3at Power-over-Ethernet standards. Classified as a Power Sourcing Equipment (PSE), it allows for centralized power supply, providing up to 30W per port, thereby reducing the hassle of power installation. Please feel free to contact us when you need assistance. 【Specifications】 ■ SFP: 2 SFP ports for long-distance optical fiber communication ■ PoE+ Ports: 8 PoE+ ports (compliant with 802.3af and 802.3at standards) ■ Power Budget: Total power budget of up to 240W for PSE ■ Ethernet: 8 Gigabit Ethernet ports (up to 1000Mbps) *For more details, please refer to the related links or feel free to contact us.
Rotating pole contact switch!
The "MM9 series" is a highly durable and dust-resistant high-performance mechanical switch. It features a contact mechanism that uses alloy contact balls, which prevents contact wear from concentrating at a single point, achieving long life and high reliability. Please feel free to contact us if you have any requests. 【Features】 ■ Switch with a contact mechanism that uses balls for the contacts ■ High-performance switch that is highly durable and resistant to dust ■ Standalone type, allowing for flexible key arrangement combinations ■ Usable in a wide range of fields from gaming devices to communication equipment, and more *For more details, please download the PDF or contact us.
