Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
61～75 item / All 825 items
It is a float-type oil film detector that is resistant to changes in water level.
It is a capacitive oil film detector. The float sensor is resistant to fluctuations in water level and can be used in drainage pits, etc. There is also a high-temperature model that can handle water above 100 degrees.
Case studies of implementation at water supply and sewage treatment facilities!
Water supply and sewage treatment facilities handle all types of wastewater, whether from households or industries. The inflow of oil poses a risk of contaminating filters and damaging bioreactors. By installing LDI oil film detectors, it is possible to detect such oil inflows early and protect the facilities.
Case studies of implementation at oil refining facilities!
Oil refining facilities are often located near rivers and coastal areas, taking into account cooling water and transportation convenience. Oil spills due to facility malfunctions or accidents pose a risk of contaminating rivers and ports, and in the event of a spill, it is necessary to review operations and implement measures to mitigate or avoid damage. By installing LDI oil film detectors in drainage facilities such as oil-water separation tanks, it is possible to detect the risk of oil leakage early and take countermeasures.
Presentation of case studies on the introduction of hydropower plants!
In power plants, heavy industrial machinery such as turbines and pumps are used. These machines contain hundreds of liters of lubricating oil, which can leak into process water due to wear and tear. This water is purified before being discharged, but it is used downstream as domestic and industrial water. By continuously monitoring the discharge with an oil film detector, it is possible to detect oil leaks and take prompt measures.
JIS standard type, lightweight, durable, and long-lasting.
The measuring tanks from Yamako Co. are designed in accordance with JIS standards, utilizing the strength and lightweight characteristics of FRP. They are simple measuring tanks that offer many advantages, including workability on-site and corrosion resistance after installation. 【Features】 - There are YMT type sewage measuring tanks and YST type sludge measuring tanks. - The overflow device (return water device) adopts a rectangular weir method, and the water volume adjustment is performed by the vertical movement of a sliding plate. - Additionally, it is secured with Yamako's unique screw lock. - By combining the overflow device and the sewage transfer device (constant outflow device), a constant outflow water volume can be ensured. - Yamako's FRP measuring tanks use DV joints as standard, and due to Yamako's special processing, there is no leakage from the inflow and outflow socket areas. - In addition to DV joints, TS joints, HI joints, and HT joints can also be installed. - For flange specifications, a special PVC flange is included. - The connection ports of large measuring tanks are fitted with FRP flanges. - Yamako can also manufacture using other materials such as SUS and PVC.
Slide plate screw lock type! Available in two types for wastewater and sludge!
This product is designed according to JIS standards, utilizing the strength and lightweight characteristics of FRP, making it a simple measuring tank with many advantages, such as workability on site and corrosion resistance after installation. The standard model uses DV joints, and thanks to our special processing, there is no leakage from the inflow and outflow socket areas. In addition to DV joints, TS joints, HI joints, and HT joints can also be installed. For flanged specifications, a special PVC flange is included, and the connection ports for large measuring tanks are fitted with FRP flanges. At Yamazaki, we can also manufacture using other materials such as SUS and PVC, so please feel free to consult us. 【Features】 ■ Made of FRP ■ Slide plate screw lock type ■ Two types for wastewater and sludge ■ Excellent corrosion resistance ■ Can be manufactured in other materials *For more details, please refer to the catalog or feel free to contact us.
Multi-functional boiling and cooling tank capable of boiling, cooling, and molding.
In addition to regular boiling and cooling, we can also mold the products, allowing for differentiation. While we have standard sizes, we can design according to your requests regarding boiling and cooling times or space.
Ideal for boiling and cooling food in the food industry. Batch-type continuous boiling and cooling tank.
You can freely set the boiling and cooling time, allowing you to create products as desired. Since boiling and cooling are done case by case, it can be used widely regardless of shape or size.
Decomposing high-salinity wastewater (up to 15%) with microorganisms! We will introduce a case that solved the issues of cost reduction and difficult-to-decompose treatment.
The "Sun Purification Center Ume no Sato" is a facility specializing in the treatment of seasoning liquid generated during the production of pickled plums, a specialty product of Wakayama Prefecture. The high-salinity wastewater (up to 15% salt concentration) produced during the production process of seasoned pickled plums was previously disposed of as industrial waste outside the region. The facility was established in response to the desire to "process this seasoning wastewater locally." The seasoning liquid collected from the pickled plum processing factory is adjusted to a pH suitable for microbial treatment, and organic matter is decomposed and removed through treatment with specialized microorganisms (halophilic bacteria). The microbial treatment process is repeated, and after removing fine debris, it is confirmed that the water meets discharge standards before being released into rivers. In the event of any abnormal readings, there is a fail-safe measure in place that automatically halts the discharge into the river. [Case Study] ■ Proposal Introduction of custom-made microorganisms that efficiently decompose even at high salt concentrations. ■ Implementation Effect The organic matter concentration of the treated water was significantly reduced below discharge standards, resulting in a reduction of approximately 43% in the treatment costs of the seasoning wastewater, leading to cost savings.
Ultrasonic cleaning tank
This is a device for cleaning flux and oil using a combination of ultrasonic waves and alkaline detergent as a regulatory measure against the use of fluorinated gases.
Ideal for small-scale etching. It will definitely provide support and improve workability and stability!
The small PTFE Teflon tank is a Teflon layer that excels in chemical resistance and heat resistance. We offer Teflon tanks machined from Teflon blocks in your desired size. They can be purchased as a set with fixtures. Ideal for small-scale etching and cleaning processes. For more details, please contact us or refer to the catalog.
At MSA Factory, we accept orders for processed products starting from a single small part at low prices and with short delivery times.
We can manufacture round and rectangular tanks at low prices, tailored to their shape, size, and functionality. While adhesive provides sufficient strength, in conditions such as high water pressure, we can enhance the strength by welding the bottom surface. Although we introduced tanks as an example of use, MSA Factory specializes in general resin processing! Please feel free to consult us when you need resin processed products. ● For more details, please download the catalog or contact us.
Guaranteed zero odor of decay, such as hydrogen sulfide! Introducing cases where ducks have started to arrive!
This case study collection introduces improvement examples of wastewater treatment facilities, etc., using the Aqua Blaster. It includes numerous examples such as improvements at a prepared foods factory, a "batch aeration tank" improvement case at a food additive manufacturing plant, and improvement cases from major chemical factories. The cost benefit estimation table associated with the replacement to the Aqua Blaster is based on actual values reported by customers. [Contents (partial)] ■ Improvement case of the "adjustment tank" at a food complex wastewater treatment facility ■ Improvement case at a prepared foods factory ■ Improvement case of the "first aeration tank" at a tofu factory ■ Improvement case of the "adjustment tank" at a dressing factory ■ Improvement case at a broiler factory *For more details, please refer to the PDF document or feel free to contact us.
In addition to improving the quality of treated water, we have received positive feedback such as "significant sludge reduction (with a record reduction of 800 tons per year)" and "20% reduction in electricity costs"!
This catalog is a collection of case studies on wastewater treatment improvements using "Aqua Blaster." It includes examples such as the "Improvement Case of the Adjustment Tank at a Food Complex Wastewater Treatment Plant," "Improvement of a Prepared Food Factory," and "Improvement Case of a Tofu Factory's First Aeration Tank." In the "Improvement Case of Wastewater from a Major Supermarket Prepared Food Factory," not only was the treatment improved, but the odor was eliminated, and the workforce was reduced to nearly unmanned operation, achieving an annual cost reduction of 15 million yen (excluding labor costs). We encourage you to read it. 【Featured Case Studies (Partial)】 ■ Improvement Case of the Adjustment Tank at a Food Complex Wastewater Treatment Plant ■ Improvement Case of a Prepared Food Factory ■ Improvement Case of a Tofu Factory's First Aeration Tank ■ (1) Improvement Case of the Adjustment Tank at a Dressing Factory ■ (2) Improvement Case of the Adjustment Tank at a Dressing Factory - Follow-up *For more details, please refer to the PDF document or feel free to contact us.
Optimization of wastewater treatment facilities through the production of chemical tanks, reaction tanks, and screen boxes.
At Shimizu Engineering Co., Ltd., we design and manufacture various resin tanks (measuring tanks, screen boxes, treatment tanks, reaction tanks) necessary for industrial wastewater treatment facilities. We select the most suitable materials such as PVC, polypropylene (PP), and PVDF (fluororesin) according to the chemicals used and water quality conditions, producing tank products with high durability and corrosion resistance. We have a proven track record in a wide range of fields, including chemical plants, plating factories, food factories, and semiconductor manufacturing lines. The measuring tanks are compatible with flow meter installation ports and liquid level sensor installations. The screen boxes can be optimized for solid separation mechanisms and we propose structures that are easy to maintain. Treatment tanks and reaction tanks are also designed according to capacity, stirring specifications, and chemical concentration. We handle everything from the manufacturing of complete wastewater treatment systems to the repair and lining of existing tanks. We are flexible in accommodating single units, prototypes, and short delivery time projects.
