更新日： 集計期間:Oct 22, 2025～Nov 18, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Oct 22, 2025～Nov 18, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Oct 22, 2025～Nov 18, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
3136～3150 件を表示 ／ 全 3436 件
槽内の清掃が容易！高精度かつ高速の制御系を実現した超高圧耐圧試験機のご紹介
『インパルステスタ 超高圧耐圧試験機』は、試験槽内に設置した供試品の内部に、 水を圧力媒体にしてパルス状の200MPa圧力を印加し、耐圧能力を評価します。 圧力印加のメカニズムは、サーボバルブで制御されたブースタシリンダにより 衝撃圧を印加する方式で高速の昇圧速度を得ています。 制御系は圧力センサーの信号をフィードバックに用いていることで、高精度かつ 高速の制御系を実現。圧力媒体には水を使用しているため、槽内の清掃が容易です。 【特長】 ■サーボバルブで制御されたブースタシリンダにより衝撃圧を印加する方式 ■高速の昇圧速度を得ている ■制御系は圧力センサーの信号をフィードバックに用いている ■高精度かつ高速の制御系を実現 ■圧力媒体には水を使用しているため、槽内の清掃が容易 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
The temperature setting range is 100 to 400℃! Continuous load is applied while maintaining a specified constant temperature.
The "Fatigue Testing Machine" is a device that applies repeated loads to a test specimen under a constant temperature to conduct fatigue testing. The control system uses electric and hydraulic servo valves to create a load control system that manages the load applied to the test specimen. It can control up to six testing machines, each equipped with a constant temperature chamber that continuously applies load while maintaining a specified constant temperature. 【Features】 - Continuously applies load while maintaining a specified constant temperature - Can control up to six testing machines - Amplitude and offset can be set to different values for each testing machine - The progress of the test and test data are displayed on a screen and recorded on a hard disk *For more details, please refer to the PDF document or feel free to contact us.
You can measure the spring load and stroke of the spool without applying hydraulic pressure!
The device is designed to install a test specimen (3-mode valve assembly) onto an inspection manifold block and automatically perform pass/fail judgment by pressing the spool of the test specimen with a linear actuator to measure the spool's spring load, stroke, and the pressure discharged from each hydraulic port. Additionally, it is capable of measuring the spool's spring load and stroke without applying hydraulic pressure. It consists of a hydraulic unit and a DC servo motor-driven linear actuator. 【Specifications】 ■ Test specimen: Integrated VLV assembly ■ Hydraulic pressure: 300 kPa ■ Supply flow rate: 10 L/min ■ Spool pressing load: Maximum 20 N ■ Dimensions: Width 1.6 m, Depth 1.9 m, Height 1.7 m *For more details, please refer to the PDF document or feel free to contact us.
Rotate at the specified angular acceleration and speed! During the test, the temperature, vibration, and rotation speed of each part will be measured and recorded.
We would like to introduce our "Wheelset High-Speed Rotational Testing Machine (for High-Speed Railway Vehicles)." The wheelset of the test specimen is connected to the drive motor for wheelset rotation through a gearbox that is integrated with it, using belts and pulleys. Due to the high-speed rotation, lubricating oil is circulated within the gearbox, and flushing is performed before starting the operation. This drive motor rotates at a specified rotational acceleration and speed through inverter control, and during the test, the temperature, vibration (noise), and rotational speed of each component are measured and recorded. 【Features】 ■ Records and evaluates the temperature, vibration (noise), and other parameters of each wheelset component ■ The drive motor rotates at a specified rotational acceleration and speed through inverter control ■ Wheelset rotational speed: capable of reaching the maximum operational speed *For more details, please refer to the PDF document or feel free to contact us.
Tegusis's extended warranty service can be joined until one month after the warranty expiration date.
This is the PC extended warranty service for TEGSYS, a service for the manufacturing and sales of research and industrial PCs. Please consider it when introducing our company's PCs.
It can cool down in nearly half the time of other companies!
The "TK40 Series" is an emergency generator load testing device designed to ensure sufficient load even in a compact size by using multiple small fans to cool the heater thoroughly, stabilizing the heater temperature. It can cool down in nearly half the time compared to other companies, allowing for reduced time after testing. Please feel free to contact us if you have any inquiries. 【Key Features】 ■ Load can be selected in 8 stages, in increments of 5kw, up to 40kw ■ Equipped with a 5kw APR (Power Regulation Device), allowing load adjustment from 0 to 5kw in the first stage ■ Control power can be selected from emergency generator power or commercial 100V power ■ The load heater power will not turn on if the blower switch is OFF *For more details, please download the PDF or contact us.
We have a 15-ton hot press machine, a 3D laser microscope, and more! Let us introduce our evaluation testing and analysis services.
Our technology department is equipped with various testing machines and analytical instruments, conducting not only in-house research and development but also external testing requests. We can evaluate the coefficient of friction and durability for various surface treatments. Additionally, our 15-ton hot press can perform "release property evaluation tests," including thermosetting resin molding tests. Furthermore, we offer component analysis using fluorescent X-ray and atomic absorption methods. Please feel free to contact us for inquiries. 【Evaluation Testing and Analysis Services】 ■ Durability Evaluation Tests - Tribology and durability evaluation testing machines specialized for press molds - Customizable pressing pressure and drawing speed - Coefficient of friction and durability evaluation for various surface treatments *For more details, please refer to the PDF document or feel free to contact us.
We offer products that are compatible with various tests such as dielectric strength, insulation resistance, and ground continuity!
This catalog introduces safety-related testing equipment from Kikusui Electronics, which we handle. It features many products, including the AC withstand voltage and insulation resistance tester "TOS9300" and the high voltage scanner "TOS9320," along with their characteristics and basic performance. The content is designed to be easy to reference when selecting products. Please feel free to download and take a look. 【Contents (excerpt)】 ■ Safety-related testing equipment "TOS Series" lineup ■ TOS9300 SERIES ■ TOS5300 SERIES ■ TOS5200 SERIES ■ TOS5101 *For more details, please refer to the PDF document or feel free to contact us.
For evaluating PID phenomena in solar cell modules! Standard equipped with RS232C interface.
This catalog introduces the PID insulation tester 'TOS7210S' from Kikusui Electronics Corporation, which we handle. It provides detailed information on the product overview, features, and PID phenomena. In addition to PID evaluation, it can also be used for evaluation tests of insulating materials that require high-sensitivity measurements. [Contents] ■ What is PID phenomenon ■ PID test-related materials ■ Specifications *For more details, please refer to the PDF document or feel free to contact us.
Improvement of accuracy and reproducibility! An ideal sensor to replace mechanical vibration switches.
The "5477B" is a vibration switch equipped with reliability as a two-wire connection and solid-state device. By separating the initial start-up and monitoring delays, it prevents unnecessary control. It features an all-weather, explosion-proof aluminum housing with a removable vibration electronic module built inside. 【Features】 ■ Speed measurement compatible with acceleration ■ Single contact ■ Separation of start-up and monitoring trip delays ■ External contact adjustable ■ LCD display available (optional) *For more details, please refer to the PDF materials or feel free to contact us.
Reduction of spare parts and complexity of operation! Equipped with dust resistance, moisture resistance, and rust prevention.
The "PRO" series has almost the same functions, differing only in the shape of the housing and the size of the connections for the vibration switches. There are three models in the lineup: "PRO440," "PRO450," and "PRO6000." They can be installed on or near equipment in explosion-proof areas or under environmental conditions typical of industrial plants. 【Features】 ■ Designed to be mounted in a position that is easy to see and operate ■ Equipped with dustproof, moisture-proof, and rust-proof features ■ Compatible with signals from converters for vibration, shock, temperature, water level, and flow ■ Vibration switches support upper limit alarm settings *For more details, please refer to the PDF materials or feel free to contact us.
Designed for speed sensors and acceleration sensors mounted on the machine housing, as well as proximity probes for observing shafts!
The "Metrix 5580" is a smart signal conditioner that can display earthquake output in peak or RMS units. By connecting a mini USB port on the front panel and using easy-to-set-up software, setup and usage are simple. It is highly recommended for industrial sites where setting up may be challenging. It can drive 4-20mA signals up to 2km and dynamic signals can be driven up to 300m (1,000 feet) without signal degradation. 【Features】 ■ 2-channel module, 1-channel or 2-channel enabled ■ Field-configurable full-scale range ■ Field-selectable input types and output scale units ■ Field-reconfigurable bandpass filter ■ Frequency filters tailored to specific machine conditions *For more details, please download the PDF (English version) or feel free to contact us.
Entry into further markets made possible! Approval of medical devices for sale or distribution in the European Economic Area.
As of May 26, 2021, the EU Regulation 2017/745 (MDR) has been established to replace the old EU directive on medical devices (93/42/EEC). In terms of content, the MDR differs significantly from the previous EU directives in many aspects. Among the important innovations are the expansion of the scope of application, the specification of minimum content for the creation and maintenance of technical documentation, and the tightening of requirements for clinical evaluation. Additionally, new classification rules have been introduced, including a new class classification for reusable surgical instruments, as well as devices that include software and nanomaterials. [Changes to Regulation (EU) 2017/745 for Medical Device Manufacturers (Partial)] ■ Expansion of the scope of application ■ Specification of minimum content for the creation and maintenance of technical documentation ■ Tightening of requirements for clinical evaluation ■ Introduction of new management procedures for high-risk medical devices ■ Appointment of a person responsible for regulatory compliance (PRRC) ■ Strengthening of requirements for post-market surveillance of medical devices *For more details, please refer to the related links or feel free to contact us.
![[MDR Application Reception] European Medical Device Regulation (EU) 2017/745](https://image.mono.ipros.com/public/product/image/69a/2000801059/IPROS9627487576239185179.png?w=280&h=280)
Timely support for consultations in Japanese! We are currently accepting MDR applications within Japan.
Medical devices for the European market are required to comply with the MDR (EU Regulation 2017/745) instead of the old MDD (EU Directive 93/42/EEC) as of May 26, 2021. Except for low-risk Class I devices, certification by a Notified Body (N.B.) is mandatory for Class Is, Im, Ir, Class IIa, IIb, and Class III medical devices. Our company acts as the Japanese contact point for the DQS Group, providing services for medical device certification based on Japan's Medical Device and In-Vitro Diagnostic Medical Device Act, as well as serving as the Japanese contact for DQS Medizinprodukte, the N.B. for MDR. Please feel free to consult us for more details. 【What DQS Japan Can Do for You】 ■ Provide bridging services between Japanese medical device manufacturers and DQS Medizinprodukte ■ Secure MDR auditors and Regulatory Affairs Managers residing in Japan, ensuring timely responses to inquiries in Japanese *For more details, please refer to the related links or feel free to contact us.
Internal pressure fatigue can be measured in 1/50 of the time of a typical device! Compatible with all individual components that allow pressure adjustment.
We would like to introduce the "Internal Pressure Fatigue Testing Device" handled by Systec Co., Ltd. With easy settings via a touch key, it can generate specified pressure waveforms, and the waveforms can be monitored in real-time using an oscilloscope. This allows for easy understanding of the progress and conditions of the tests, ensuring thorough measurement operations. Achieving ultra-fast pressure changes of "50 times per second" significantly reduces time, providing substantial benefits for product development and material research. 【Features】 ■ Remarkable reduction in measurement time ■ One-touch operation ■ Easy handling of test liquids and workpieces ■ Selection of test liquids suitable for the workpiece ■ Arbitrary changes to set values ■ Thorough seismic resistance and soundproofing *For more details, please refer to the PDF materials or feel free to contact us.
