Last Updated： Aggregation Period:Aug 19, 2026～Sep 15, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 19, 2026～Sep 15, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 19, 2026～Sep 15, 2026
This ranking is based on the number of page views on our site.
841～870 item / All 2484 items
Conversion between the American standard (NPT) and the pipe taper threads widely used in Japan (PT・R) is possible.
This product is an adapter for converting the compressed air supply port of original products such as the "Transvector Vortex Cooler" from NPT standard (except for some models) to PT(R) standard. Material: aluminum, stainless steel, brass. Various types are available to accommodate a wide range of models.
Introducing an AC adapter with input: 100VAC, output: 12VDC 1A.
The AC adapter 'DC-121A' for analog camera peripherals handled by our company has an input of 100VAC and an output of 12VDC 1A.
It can be used simply by screwing in capillaries of various inner diameters (ferrules without flanges)!
The "QHK-1" is a bare fiber adapter that can be used directly after stripping or cleaving the coating with a commercially available fiber holder (just insert the fiber). There are two types of capillaries: SC type (outer diameter φ2.5) and SMA type (outer diameter φ3.172), and even if the fiber extends long from the holder, the V-groove guides it easily into the ferrule hole. Once inserted, it is securely fixed with a magnet, so there is no worry about movement during work. 【Features】 ■ Weight is 14g (including capillary), and when combined with the fiber holder, it is 25-26g ■ Can also be used with a type of fiber holder that has no lid (fiber secured with tape) ■ Usable for optical inspection of various thicknesses of optical fibers ■ Functions as a bare fiber adapter when used in conjunction with commercially available FH (Fiber Holder 1) ■ By replacing the capillary, it can be applied to various outer diameters of optical fibers ■ Demo units available for loan (1 week) *For more details, please refer to the PDF document or feel free to contact us.
It is possible to set the supply voltage from 13.0V to 14.8V in increments of 0.1V!
The "INC100J" is a stabilized power supply with a maximum output of 100A, capable of specifying voltage during reprogramming, functioning as both a battery charger and power supply. It supports 12V batteries ranging from 112Ah to 150Ah, and can charge batteries in vehicles, including idle-stop cars, light vehicles, hybrid cars, EVs, and large vehicles. Additionally, we offer two types of dedicated cables, including a round terminal and a small crocodile clip, which are convenient for use in showrooms. 【Features】 ■ Powerful backup of MAX100A ■ Voltage specification for reprogramming is possible ■ Compatible with various batteries ■ Easy operation with full auto mode *For more details, please refer to the PDF document or feel free to contact us.
We will support you with a GaN AC adapter and a cable set that is compatible with Power Delivery.
SPEC ・100240V 50/60Hz ・5V/3A,9V/3A,12V/3A 15V/3A,20V/3.25A ・PPS:3.3V～11V 5A 65W（MAX） ・Size:30×34×65mm ・OCP,OVP,OTP,SCP ・PD3.0/QC4＋/PPS/ Apple2.4A/AFC/MTK PE/SSCP,QC3.0/QC 2.0 SPEC ・100～240V 50/60Hz ・USB-C:5V/3A,9V/3A,12 V/3A,15V/3A,20V/3.25A USB-A:4.5V/5A,5V/4.5A,9V/3A,12V/2.5A,20V/1.5A 100W（MAX） ・Size:75×75×29mm ・OCP,OVP,OTP,SCP ・PD3.0/QC4＋/PPS/ Apple2.4A/AFC/MTK PE/SSCP,QC3.0/QC 2.0
The "Probe Guard Adapter" is an adapter for attaching the probe guard.
The "Probe Guard Adapter" is an adapter for attaching a probe guard. MJC has excelled in probing technology and has grown and developed over time. We have established an environment that ensures reliable contact with ever-evolving semiconductor devices and FPD devices, providing consistent and high-reliability inspection and measurement. 【Features】 ○ Adapter for attaching probe guards For more details, please contact us or download the catalog.
An adapter made of zinc die-cast with male and female parallel threads!
The "PF(G) Screw Reduction Adapter (Die-Cast)" is an adapter made of zinc die-cast with male and female parallel pipe threads. It comes with a sheet packing to ensure sealing on the wall surface of the male thread section. The material is zinc alloy die-cast with electric zinc plating (trivalent unichrome). 【Features】 ■ Equipped with male and female parallel pipe threads ■ Zinc die-cast adapter ■ Includes sheet packing *For more details, please refer to the PDF document or feel free to contact us.
An adapter and reducer with a pressure-resistant explosion-proof structure that can enlarge or reduce screw sizes.
The "Pressure-resistant explosion-proof structure adapter & reducer (d2)" can enlarge or reduce screw sizes. The material is steel (stainless steel or brass is also acceptable) + electro-galvanized. 【Features】 ■ Pressure-resistant explosion-proof structure ■ Can enlarge or reduce screw sizes ■ Material: steel (stainless steel or brass is also acceptable) + electro-galvanized *For more details, please refer to the PDF document or feel free to contact us.
Screw conversion adapter with PG thread on the outside and M thread on the inside!
The "Skin Dihit MA-PG/M" is a screw conversion adapter that has a PG thread on the outside and an M thread on the inside. You can use an M thread cable gland in the PG thread hole, and there are two types of shapes: A and B. The material is brass with nickel plating. 【Features】 ■ PG thread on the outside and M thread on the inside ■ M thread cable gland can be used in the PG thread hole ■ Two types of shapes: A and B *For more details, please refer to the PDF document or feel free to contact us.
A screw conversion adapter with PG threads on the outside and M threads on the inside!
The "Skin Dihito A-PG/M" is a screw conversion adapter that has a PG thread on the outside and an M thread on the inside. You can use an M thread cable gland in the PG threaded hole, and there are two types of shapes, A and B. The material is glass fiber reinforced polyamide, and the operating temperature range is -40°C to +100°C. 【Features】 ■ PG thread on the outside and M thread on the inside ■ M thread cable gland can be used in the PG threaded hole ■ Two types of shapes: A and B ■ Operating temperature range: -40°C to +100°C *For more details, please refer to the PDF document or feel free to contact us.
An adapter for enlarging PG screw holes in machines, equipment, and housings!
"Skin Dihito ME" is an adapter that enlarges PG screw holes in machines, equipment, and housings. The material is brass with nickel plating. 【Features】 - Enlarges PG screw holes in machines, equipment, and housings - Material: Brass with nickel plating *For more details, please refer to the PDF document or feel free to contact us.
A conversion adapter that allows you to secure an NPT threaded gland to a mounting hole that has been processed with M threads!
The "Skin Dihit MA-M/NPT" is a conversion adapter used to secure an NPT threaded gland to a mounting hole that has been machined with M threads. The outer side has M threads, while the inner side has NPT threads. (EN 50262) The material is brass with nickel plating. 【Features】 ■ Can secure an NPT threaded gland to a mounting hole that has been machined with M threads ■ Outer side has M threads, inner side has NPT threads ■ Material: Brass with nickel plating *For more details, please refer to the PDF document or feel free to contact us.
A reducing adapter that can secure a ground smaller than the mounting screw hole that has been processed with M screws.
The "Skin Dihit MR-M" is a reducing adapter used to secure a ground that is smaller than the processed mounting screw holes. The material is brass with nickel plating. 【Features】 - Can secure a ground that is smaller than the processed mounting screw holes - Material: Brass with nickel plating *For more details, please refer to the PDF document or feel free to contact us.
Used to connect a threaded pipe to the hub of a junction box, etc.!
The "M Screw & G Screw Reducer Adapter (Made of SUS)" is a stainless steel (SUS 304) reducer used when connecting a threaded pipe to a male thread, such as a hub of an exposed box, when the male thread is large. 【Features】 ■ Reduces the thread size ■ Material: Stainless Steel (SUS304) *For more details, please refer to the PDF document or feel free to contact us.
Adapter used to secure a ground that is smaller than the processed mounting screw hole.
The "Skindihit KU-M" is an adapter used to secure grounds that are smaller than the processed mounting screw holes. The material is fiberglass reinforced polyamide, and the operating temperature range is -40°C to +100°C. 【Features】 ■ Used to secure grounds smaller than the mounting screw holes ■ Material: fiberglass reinforced polyamide ■ Operating temperature range: -40°C to +100°C *For more details, please refer to the PDF document or feel free to contact us.
Adapter used to secure a ground that is larger than the processed mounting screw hole.
The M screw enlarging adapter "Skindihit ME-M" is an adapter used to secure cable glands that are larger than the pre-processed mounting screw holes in machines, devices, and housings. The material is brass with nickel plating. An explosion-proof type is also available. 【Features】 ■ Used to secure cable glands that are larger than the pre-processed screw holes ■ Material: Brass + Nickel plating ■ Explosion-proof type available *For more details, please refer to the PDF document or feel free to contact us.
An adapter used to secure a ground that is larger than the processed mounting screw hole.
The M screw enlargement adapter "Skindihit EKU-M" is an adapter used to secure cable glands that are larger than the pre-processed mounting screw holes in machines, devices, and housings. The material is glass fiber reinforced polyamide. The operating temperature range is -40°C to +100°C. 【Features】 ■ Can secure cable glands larger than pre-processed screw holes ■ Material: Glass fiber reinforced polyamide ■ Operating temperature range: -40°C to +100°C *For more details, please refer to the PDF document or feel free to contact us.
With NPT male threads! You can pass through the connector without cutting the tube or anything else.
The "Fluororesin Screw Cap Adapter" is a product with NPT male threads designed to connect thick-walled semi-rigid tubes, rigid tubes, glass tubes and rods, as well as metal pipes and rods. There are two types of tube connection sections available: one for metric standard tubes and one for inch standard tubes. It allows for the passage of connectors without cutting the tubes, making it convenient for inserting sampling tubes, probe sensors, thermometers, etc., into containers. 【Features】 ■ Allows for the passage of connectors without cutting the tubes ■ Two types of tube connection sections available ■ Autoclavable sterilization (at +121℃) ■ The tube is securely fixed from the outside by tightening the cap with a taper ring and clamp ring *For more details, please refer to the related link page or feel free to contact us.
The cap is made of glass fiber reinforced PTFE! Half joint adapter with a female thread section of 7mm.
This product is an adapter for connecting semi-rigid and rigid tubes such as fluororesin, glass tubes, and metal pipes, featuring a flat bottom port with a 1/4-28UNF female thread. The length of the female thread section is 7mm, and it can connect to separately sold PTFE tube flanged fittings or adapters with the same male thread standard. The connector body and the included set of two types of sealing rings are made of PTFE, and the cap is made of glass fiber reinforced PTFE. 【Features】 ■ With 1/4-28UNF female thread ■ Body bore diameter is 0.8mm or 1.6mm ■ Operating temperature: -200 to +250℃ ■ Autoclave sterilization (at +121℃) is possible ■ Pressure resistance of 500kPa (at room temperature) *For more details, please refer to the related link page or feel free to contact us.
Conversion sockets made of SUS304! Available in sizes from 1/8 to 1".
The "Stainless Steel Conversion Adapter" is a socket for converting from NPT threads to PT threads, or from PT threads to NPT threads. The operating temperature ranges from -50°C to +150°C, and the material used is SUS304. Available sizes range from 1/8 inch to 1 inch. Please choose according to your application. 【Specifications】 ■ Operating pressure: MAX 20.6MPa (※431-NF-8281 and 431-NF-8611 only: MAX 6.90MPa) ■ Operating temperature: -50°C to +150°C ■ Material: SUS304 ■ Fluid: Fluids that do not adversely affect the above material *For more details, please refer to the related link page or feel free to contact us.
Made entirely of PEEK, heat-resistant up to +250℃! Can be sterilized with high-temperature autoclave, gamma rays, and EOG.
The "PEEK Lure Adapter" is a combination of a lure taper and R1/8 or R1/4 male and female threads. By inserting a separately sold snap lock ring (VRTR6) into the male lure (S) side, it becomes a port with a male lure lock. It has a structure that allows only the lock ring to rotate freely while preventing the connected tube from twisting. 【Features】 ■ Combination of lure taper and R1/8 or R1/4 male and female threads ■ Made entirely of PEEK, heat-resistant up to +250℃ ■ Can be sterilized using high-temperature autoclave, gamma rays, or EOG *For more details, please refer to the related links or feel free to contact us.
DC12V power adapter VAD-PS-RACK compatible with the VAD-RACK power distribution unit "VAD-PDU-D".
The VAD-PS-RACK is a power adapter compatible with the power distribution unit "VAD-PDU-D" for the VAD-RACK series of 19-inch rack-mounted chassis designed for optical transmission equipment. - Input: AC 100-260V 50/60Hz Output: DC 12V 60W (maximum) - AC cable included.
