Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
511～525 item / All 607 items
A special seminar to learn from the basics and make it useful for future development!
Learn the design conditions for small antenna performance and acquire methods to address theoretical and phenomenological degradation! Let's utilize this knowledge for future applications in expected LTE devices and power transmission technologies!
GNSS 1-port antenna, GPS L1/ GLONASS L1/ Beidou L1/ GPS L5, SMA connector
【Unictron EG-6AB-AS-A01 Features】 ■ Supports GPS L1/L2/L5, GLONASS/BEIDOU/GALILEO ■ Dimensions: 138.4 (diameter) x 90 (L) x 25.4 (H) mm ■ Excellent out-of-band rejection up to 65dB ■ IP67 completely waterproof, compact and rugged design ■ Wide operating temperature range -40 to +85℃ ■ Compliant with RoHS and REACH ■ Compatible with SMA connectors ■ Customizable cable length and connectors (optional)
GPS/GLONASS/BEIDOU L1, dimensions 33.95x25.20x10.60mm, operating temperature -40 to +85℃, IP67
【Unictron EG-23G-AS-B01 Features】 ■ Supports GPS L1/ GLONASS L1/ Beidou L1 ■ Dimensions (mm): 33.95(L) x 25.20(W) x 10.60(H) ■ 27dB LNA gain, noise figure of less than 1dB ■ IP67 fully waterproof, compact rugged design ■ Wide operating temperature -40 to +85℃ ■ Compliant with RoHS and REACH ■ Compatible with SMA connector ■ Also used in GNSS navigation systems ■ Customizable cable length and connector (optional)
Unictron, GPS, Dimensions: 80 (diameter) x 72mm, Operating temperature -40 to +85℃, IP67
【Unictron GA-88P Features】 ■ Supports GPS 1575.42MHz ■ Dimensions: 80 (diameter) x 72 (height) mm ■ IP67 completely waterproof, compact and rugged design ■ Wide operating temperature -40 to +85℃ ■ Compliant with RoHS and REACH ■ Compatible with TNC (SP) connector ■ Also used in GPS navigation systems ■ Customizable cable length and connector (optional)
Supports GPS L1/GLONASS L1/Beidou L1/GPS L2/GPS L5, operating temperature -40 to +85°C, IP67.
【Unictron EG-88W-AC-A01 Features】 ■ Compatible with GPS L1/GLONASS L1/Beidou L1/GPS L2/GPS L5 ■ Dimensions: 64.7 (diameter) x 15.8 (height) mm ■ Excellent out-of-band suppression, up to 65 dB ■ 36 dB active peak gain ■ IP67 completely waterproof, compact and rugged design ■ Wide operating temperature range -40 to +85℃ ■ Compliant with RoHS and REACH ■ Compatible with TNC (SBJ) connector / Cable length 2m (RG58) ■ Also used in GPS navigation systems ■ Customizable cable length and connector (optional)
GPS/GLONASS/Beidou, operating temperature -40 to +85℃, IP67, compliant with military standard MIL-STD-810G.
【Unictron EG-42W-AS-A01 Features】 ■ Supports GPS L1/ GLONASS L1/ Beidou L1/ GPS L2/ GPS L5 ■ Dimensions: 138.4 (diameter) x 50mm ■ Fast initialization with multi-constellation and signal frequency support ■ IP67 completely waterproof, compact and rugged design ■ Wide operating temperature range -40 to +85℃ ■ Compliant with RoHS and REACH ■ Compatible with TNC (SBJ) connector ■ Customizable cable length and connector (optional)
Enhance connection with mobile phone networks to improve data speed and bandwidth!
The "RP20 Pro 5G/4G" is an antenna that provides high-performance connectivity for current and future 4G/5G frequency bands in the frequency range of 617-960 and 1427-6000 MHz. This product is available in 2-port and 3-port variations, with the 3-port model including GNSS coverage. It is also suitable for global use across diverse cellular networks or network operators. 【Features】 ■ 2×2 MIMO global LTE and 5G coverage (617-960, 1427-6000 MHz) ■ Operates on both CBRS and unlicensed 5-6 GHz ■ Covers bands B11 and B32 ■ 3-port option with GNSS coverage ■ Compliant with extensive mechanical and environmental testing *For more details, please refer to the PDF document or feel free to contact us.
A flexible RFID antenna that fits any scene.
The "flexerBOX" is a UHF band RFID antenna that allows for highly flexible installation. It is an RFID antenna with the flexibility for users to freely envision the location, number of units, and method of installation. Because it can be used in various ways, it is suitable for all industries and scenarios, enabling operations that were not possible with conventional fixed RFID antennas. 【Features】 ■ The smallest and lightest in the series ■ Slim housing eliminates concerns about misreads ■ Supports a wide range of layouts ■ No tuning required *For more details, please refer to the PDF document or feel free to contact us.
![[400MHz Band] 2-Element Yagi Antenna 2DV-450](https://image.mono.ipros.com/public/product/image/e5e/2000438170/IPROS12691326077147909833.jpg?w=280&h=280)
Supports 340 to 480 MHz! High-performance 2-element Yagi antenna from Japan Antenna, ideal for fixed stations.
The 2DV-450 (2DV450) is a 2-element Yagi antenna manufactured by Nippon Antenna, designed for the 400MHz band. *The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This antenna is primarily used for fixed station radio equipment and is composed of a single directional antenna with an antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes depending on the operating frequency. - 340-390MHz: 2DV-450 F=340-390 specified - 390-480MHz: 2DV-450 F=390-480 specified *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type design, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-28-1A. *For more details, please feel free to contact us.
60MHz band 5-element Yagi antenna suitable for both transmission and reception for BCP measures.
The 5DV-0608 (5DV0608) is a 60MHz band 5-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna is a type of antenna made up of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. * This is a 5-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio use. * It is a representative antenna of single directivity, mainly composed of an antenna, reflector element, and director element. * The appearance is simple, with the supply section and element blanket molded from reinforced resin. * It operates at a specified frequency within the range of 54 to 75MHz. The model number varies depending on the frequency band. - 5DV-0608 68.2-69.8MHz - 5DV-0608 55-66MHz When placing an order, please specify the center frequency (fo) in MHz. * The connector is NJ. * The compatible antenna mounting bracket is F-1 (round)-K2 (D). For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, feel free to contact our company.
A 3-element Yagi antenna that can share two frequencies with a frequency interval of 48 MHz or less within the range of 330 to 470 MHz.
The 3SBD-4502 (3SBD4502) is a wideband 3-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. *The Yagi antenna is a type of antenna that consists of three rods of different lengths, functioning as a director, driven element, and reflector, providing high directivity. It was invented in 1926. *This is an antenna for radio equipment. *It is a 3-element Yagi antenna that can share two frequencies within the 330-470 MHz range with a frequency spacing of less than 48 MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The connector is NJ. *The compatible mounting brackets for the antenna are C-31(B) and C-19(B). For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, feel free to contact us.
Directional 6-segment collinear antenna with lightning protection at specified frequencies within 330-470 MHz.
The 6DA-450 is a directional six-stage collinear antenna with a lightning rod manufactured by Nippon Antenna for the 400 MHz band. It is an antenna for fixed station radios. The frequency is a specified frequency within the range of 330-470 MHz (UHF band). Please specify the center frequency (fo) in MHz when placing your order. It features a stacked dipole antenna on a stainless steel mast, providing high gain and durability. It is equipped with a lightning rod. This antenna has a cardioid radiation pattern, which means that the shape of the directional diagram resembles a heart (cardioid), with the strongest radiation in the front direction. The gain is 11.15 dBi. The antenna length is approximately 5.77 m. It weighs 35 kg. The antenna side connector is an N-J type. Note that the antenna side connector is only N-J; it can be converted to other connectors using an extension coaxial cable. An 80 cm coaxial 8D-2V cable extends from the antenna. The antenna mounting brackets B-4-1 and B-8-1(C) are compatible. For more details, please feel free to contact us.
High-gain collinear antenna for the 150 MHz band with multi-stage radiation elements that excel in waterproofing and strength.
The HG-1500 is a collinear antenna manufactured by Japan Antenna for the 150MHz band. *Collinear antennas are high-gain antennas used for radio communication, primarily in the VHF to UHF range.* This antenna is for fixed station radios. It operates on specified frequencies within 145 to 170MHz, with the model number changing according to the frequency. - 144MHz to 149MHz: HG-1500 F=144-149 - 154MHz: HG-1500 F=154 - 149MHz to 166MHz: HG-1500 F=149-166 When placing an order, please specify the frequency (fo/center frequency) in MHz that you will be using. It is a high-gain antenna with multiple radiating elements. The radiating elements are covered with an FRP material, providing excellent waterproofing and strength. It is DC shorted to prevent damage to the radio equipment from induced lightning. It is lightweight, making installation at high locations easy. The connector is equipped with an NJ type. The antenna mounting bracket is compatible with F-21(B). *For more details, please feel free to contact us.*
