Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
76～90 item / All 332 items
It is optimal for thin steel plates and thin steel plates + wooden substrate construction.
It is ideal for thin steel plates and thin steel plates + wooden substrate construction. The special screw shape prevents lifting between thin steel plates. *For details, please download the catalog or feel free to contact us.
![Screws for wooden decks [Enhancing the beauty of woodwork after installation!]](https://image.mono.ipros.com/public/product/image/79c/2000196848/IPROS412446641987497544.png?w=280&h=280)
Prevent wood cracking and splintering for a beautiful finish! A uniquely different wood deck screw.
Our "screws for wooden decks" not only allow for one-shot installation without the need for pre-drilling when the substrate is wooden joists, but they also prevent wood splitting and fraying, resulting in a beautiful finish. Functionally and aesthetically, they are designed to be suitable for installing wooden deck materials. 【Features】 ◆ The unique head shape encapsulates fraying, enhancing the appearance after installation ◆ No pre-drilling is required, which is often necessary for installing wooden deck materials ◆ Special tip design minimizes the risk of wood splitting ◆ Compatible with hard wooden deck materials 【For more details, please download the catalog or feel free to contact us】
No tools needed! It can be easily tightened with your fingers.
It is a serrated anti-slip device that attaches to the side of the head, commonly featuring vertical knurling. Its primary use is for hand tightening and can be used in areas for adjustment screws or removal. ■ RoHS compliant product (uses brass with reduced cadmium) For more details, please feel free to contact us. ↓ ↓ ↓ ↓ ↓ ↓ ↓
Measures against chatter vibrations using non-equal division pitch! It is possible to improve the cutting limit.
We would like to introduce the high-feed type body "ASDF shape," which improves machining efficiency with a large single-edge feed rate. It enables high-efficiency rough machining that brings out the unique capabilities of the machine. It is suitable for situations where durability against chip entanglement and intermittent cutting is prioritized. By differentiating it from the high-cutting type "ASDH shape," which improves machining efficiency with a large cutting amount, you can fully utilize the capabilities of various machining centers. Please contact us when you need assistance. 【Features】 ■ High-feed type that improves machining efficiency with a large single-edge feed rate ■ High-efficiency rough machining that brings out the unique capabilities of the machine ■ Usable in cases where durability against chip entanglement and intermittent cutting is prioritized *For more details, please download the PDF or feel free to contact us.
It can be used in environments where the workpiece has significant variations in casting skin and where table feed is restricted.
We would like to introduce the high cutting type body 'ASDH type' that improves processing efficiency with a large cutting amount. This product is suitable for workpieces with significant cutting variation, such as cast surfaces, or in environments where table feed is restricted, and when prioritizing the quality of the machined surface. By differentiating its use from the high feed type 'ASDF type', which improves processing efficiency with a large feed per edge, you can fully utilize the capabilities of various machining centers. Please contact us when you need assistance. 【Features】 ■ High cutting type that improves processing efficiency with a large cutting amount ■ Usable in environments with significant cutting variation in workpieces, such as cast surfaces, or when table feed is restricted, prioritizing the quality of the machined surface. *For more details, please download the PDF or feel free to contact us.
One-touch telescopic! Reverse scale for easy reading at hand!
The "Prism Pole" is a one-touch telescopic pole for prisms. It features a 5/8 inch screw at the tip and a 1 cm pitch scale on the second section of the pole. Additionally, there is a direct-reading "SK Prism Measuring Pole" with an integrated polyester tape in the lineup. If you remove the included prism, you can attach other company prisms with 6mm/8mm screws. 【Features of the Prism Pole】 ■ 5/8 inch screw at the tip ■ 1 cm pitch scale on the second section of the pole ■ Reverse scale for easy reading ■ One-touch telescopic design *For more details, please refer to the PDF document or feel free to contact us.
We accept manufacturing according to the material of the blade, blade angle, and other specifications of the processing target.
We manufacture custom-made blades. We accept production tailored to the material and blade angle, among other processing targets. Please feel free to contact us with your requests. *Please feel free to inquire.
We will propose VA and VE for better product shapes and risk avoidance.
Our company manufactures its own molds for zinc die casting. We feedback information from the molding process and condense it into the molds, allowing us to supply products at a low cost. Additionally, considering that die-cast products are exterior components, we apply surface treatments to the inserts and molds and focus on improvement measures as needed. Please feel free to contact us with any requests. 【Features】 ■ Outstanding mold response speed ■ Enhanced mold maintenance based on manufacturing information ■ Condensation of manufacturing know-how into molds *For more details, please download the PDF or feel free to contact us.
Utilizing 3D measurement machines and 3D printers, we repair and manufacture from actual items. We also accommodate the processing of extremely small workpieces.
Our company provides a "repair and manufacturing service for parts without drawings" by utilizing traditional micro-machining technology through the introduction of 3D scanner-type three-dimensional measuring machines and 3D printers. We can repair and manufacture items of unknown manufacturers or discontinued products based on scanned data. With a machining accuracy of 1/100mm, we can perform processes such as cutting a 0.3mm groove into a 2mm x 1.2mm cylinder. Please feel free to consult us. 【Supported Materials】 ■ Titanium ■ Stainless Steel ■ Copper ■ PEEK ■ Carbon, etc. *You can view examples of titanium parts processing via PDF download. Please feel free to contact us.
You can install it using only an impact driver! Ideal for fastening ceramic siding.
The "Siding Screws & Countersink Drill" is a new type of construction screw that allows for the installation of screws using only an impact driver, moving away from the traditional method of manually hammering nails around openings and at the ends of siding. The countersink drill is specifically designed for siding screws, ensuring a perfect match for the pilot hole diameter and countersink diameter. This results in a finish without cracks or chips in the siding. 【Features】 [Siding Screws] ○ Significantly reduces labor and time ○ Ideal shape for fiber cement siding ○ Made of rust-resistant stainless steel SUS410 [Siding Countersink Drill] ○ Specifically designed for siding screws ○ Equipped with a stopper function to prevent over-drilling For more details, please contact us or download the catalog.
Fast driving speed with W-start 2-thread screws! High rust resistance with non-chrome silver coating.
The "Taru Wood Screw" features a tip with a late cut design for excellent bite and prevention of wood splitting. It utilizes a double-start, two-thread screw for fast driving speed. The head size is marked for easy size verification after driving. The non-chrome silver coating has very low friction resistance and provides strong rust resistance. 【Features】 ■ Fast driving speed with double-start, two-thread screw ■ W-notch acts like a saw blade for easy driving ■ Excellent bite and prevention of wood splitting with late cut tip design ■ Head size marking allows for size verification after driving ■ Non-chrome silver coating with very low friction resistance and strong rust resistance *For more details, please refer to the PDF document or feel free to contact us.
Stainless steel base color with a passivated finish! Versatile screws made of heat-treated stainless steel SUS410.
The "Stainless Universal Screw" is a versatile type that tightens well and has excellent strength and workability even in hard materials. It is suitable for exterior materials on wood decks. When constructing a hardwood deck, pre-drilling and countersinking deeper than the screw length is necessary. The dual-thread design with high and low threads, along with the tip that is cut to split, allows for easy and smooth penetration into hardwood while providing strong pull-out resistance. 【Features】 ■ Made of stainless steel SUS410 ■ Dual-thread design with high and low threads + split tip ■ Large diameter head with a flange ■ Head sinks flat and holds firmly ■ Passivated finish in stainless steel color *For more details, please refer to the PDF document or feel free to contact us.
Introducing screws made from SUS304 material with excellent rust resistance, featuring a luxurious down-face recess!
The "Sten Wood Deck Screw" features a serrated flat head that sinks without splintering, resulting in a beautifully finished round product. Made from SUS304 material, it offers reliable rust resistance. The bronze color, which complements deck materials well, is not a coating but a tempered bronze (heat-treated) finish. The high-low double thread with diamond cuts (notches on the screw threads) allows for smooth screwing into hard deck materials, ensuring reliable holding power. 【Features】 ■ Luxurious feel with a down-face recess ■ Square hole #3 head that effectively transmits torque ■ Reliable holding power ■ Reliable rust resistance with SUS304 material ■ Bronze color is a tempered bronze (heat-treated) finish, not a coating *For more details, please refer to the PDF document or feel free to contact us.
Easy-to-purchase small bag sales
Selling screws used as accessories for our products in small packages! 【Types】 ■ ST(A) pan tapping screw 3.5x30 (50 pieces) ■ ST(A) pan tapping screw 3.5x30 (10 pieces) ■ ST BR(A) pan tapping screw 3.0x30 (20 pieces) ■ Slim head A tapping screw trivalent white 3.5x25 (10 pieces) *For more details, please refer to the PDF document or feel free to contact us.
