Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
2401～2430 item / All 2946 items
SMA plug for relay use, panel jack RO1.5D cable
1.5D for robots (compatible with movable parts) Bending test: Guaranteed for 10 million cycles (proven use up to 20 million cycles) This is an SMA extension cable for robot arms and movable parts that boasts high flexibility. It is 1.5D in size and offers excellent flexibility.
RG-316 coaxial cable
Temperature characteristics: -40-185℃ Low loss, high cutoff type with constant characteristic impedance in the high-frequency range. Lightweight and relatively excellent in flexibility and workability.
Ultra-thin line using 1.13 coaxial cable
Ultra-fine wire has relatively low loss and a high cutoff type, maintaining a constant characteristic impedance in the high-frequency range. It is lightweight and excels in flexibility and workability.
Ajilo exterior cable
●Outer layer of the ajilo: Φ0.32 galvanized iron wire braid ●Loop resistance (at 20℃) (Ω/km): standard 25.0 (maximum below 26.8)
RG-142 coaxial cable
Temperature characteristics: -40 to 185°C, low loss, high cutoff type with constant characteristic impedance in the high-frequency range. Lightweight, with excellent flexibility and workability.
1.5D-2V coaxial cable
Daiyuu Electric Wire Co., Ltd. products have a constant characteristic impedance in the high-frequency range. They are lightweight and excel in flexibility and workability.
2.92mm(K) Low-cost high-performance cable
This is a low-cost, high-performance cable that supports up to 40GHz. The 2.92mm (k) connector is compatible with SMA and 3.5mm connectors.
Introduction of a 1m extension cable for solar radiation and 4-20mA connection!
The "SLAW-CX2W-1M" is an extension cable for solar radiation and 4-20mA connections. This product is an optional item. Compatible sensors include the solar radiation sensor "SLAW-PML2S," the weight sensor "SLAW-PSB15," and the tensiometer "SLAW-PFPT20," among others. Additionally, it can be used with a variety of other devices. 【Specifications】 ■Model number: SLAW-CX2W-1M ■Cable length: 1m ■Connector: XS2 terminal *For more details, please refer to the external link or feel free to contact us.
Introducing optional products for solar radiation and 4-20mA connections!
The "SLAW-CX2W-2M" is an extension cable for solar radiation and 4-20mA connections. It is compatible with various sensors, including the solar radiation sensor "SLAW-PMS1," the nutrient solution sensor "SLAW-PECPH01," and the weight sensor "SLAW-PSB15." Additionally, there is a wide range of compatible sub-devices available. 【Specifications】 ■Model number: SLAW-CX2W-2M ■Cable length: 2m ■Connector: XS2 terminal *For more details, please refer to the external link or feel free to contact us.
We offer a range of wires and cables that excel in both performance and environmental consideration!
"VVF cable" is a flat type of 600V vinyl insulated vinyl sheath cable used for indoor wiring in various buildings such as residential homes, commercial facilities, and public facilities. It has excellent weather resistance, allowing it to withstand long-term use. Additionally, the identification of the conductors can be done by the color of the insulation, making installation easy. [Applications] - Indoor wiring - Wiring for heating and cooling - Various temporary construction works, etc. *For more details, please download the PDF or feel free to contact us.
Polyethylene insulated flame-retardant polyethylene sheathed flat cable
We handle the polyethylene insulated flame-retardant polyethylene sheathed flat cable 'EM Cable', which is used for indoor wiring in buildings that consider the environment, such as government offices, schools, and hospitals. This product does not contain halogen substances that raise concerns about environmental impact. Compared to VVF, it has a higher allowable temperature of 75°C and an allowable current that increases by approximately 1.3 times. Please feel free to contact us if you have any inquiries. 【Product Lineup】 ■ EM Cable ■ EM Cable G Line 200V Line *For more details, please download the PDF or contact us.
Compliant with the RoHS directive! Additionally, the material is indicated on the product casing, making it easy to sort during recycling.
Our "indoor wiring cables" come in a slim outer diameter and a variety of conductor sizes. They are useful for telephone wiring projects. We offer convenient flat indoor cables suitable for security devices, home telephones, business phones, and PBX-related wiring. Conductor diameters range from 0.4mm to 0.65mm, and you can choose from 1 pair to 6 pairs depending on the site requirements. 【Features】 - A lineup of slim outer diameters and various conductor sizes - Useful for telephone wiring projects - Conductor diameters range from 0.4mm to 0.65mm, with options from 1 pair to 6 pairs based on site needs - Compliant with RoHS directives - Material labeling on the product outer sheath for easy sorting during recycling *For more details, please refer to the PDF document or feel free to contact us.
Heat resistance up to 150°C. Can be cut to the desired length. Proven results in noise reduction for medical devices and machine tools.
Our company is engaged in the manufacturing and sales of "Shield Mesh," which is effective for noise countermeasures in various types of cables. It is made by braiding tin-plated soft copper wire into a tubular shape, maintaining its shielding effectiveness even in high-temperature environments of up to 150°C. In addition to selling it on spools, we also accommodate requests for cutting to specified lengths and delivering it with folded processing. 【Features】 ■ Easily attachable to processed wire harnesses ■ Capable of producing a neat folded finish after assembly ■ Proven track record in noise countermeasures for cables in medical devices and machine tools ■ Uses fine wire with a diameter of 0.1mm *You can view materials that include examples of processing during installation from the PDF download.
Boasting high durability and waterproof, dustproof, and shielding properties, it can be used in harsh locations. Customization is also available.
We consistently produce "Industrial Ethernet Cables" specialized for use in industrial equipment that contributes to high-reliability connections. These cables utilize M12 connectors and are compatible with industrial lifelines (power, signal, data). In addition to high durability, they possess waterproof and dustproof properties, as well as shielding capabilities. By combining our high-flexibility cables, even more robust connections can be achieved. They can be used in movable and mobile parts of equipment, outdoor and wet areas, harsh environments with vibrations and shocks, as well as around medical devices and power supplies. 【Features】 - Available with M12 connectors on both ends, or with an RJ45 plug on one end; custom specifications can also be provided with guaranteed compliance to performance tests. - M12 connectors are die-cast connectors that are resistant to noise. - Waterproof and dustproof (performance may vary by manufacturer). *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Various types of USB cables for high-speed transmission
<High-Speed Data Transfer> The theoretical data transfer speed of USB 3.1 is up to 10 Gbps, which is about twice as fast as USB 3.0. This allows for a reduction in the time required for file backups and large data transfers compared to previous standards. <Maximum 100W Power Supply> When USB 3.1 is compliant with the USB Type-C specification and supports the USB PD (Power Delivery) standard, the maximum power supply is 100W (20V, 5A). In contrast, the maximum power supply of USB 3.0 is 4.5W (5V, 900mA), meaning the power supply capacity has been enhanced by more than 20 times. <Video Output Capability> Products with USB Type-C specification in USB 3.1 may feature a function called "Alternate Mode," which allows for the transmission of video signals. This enables the connection of a smartphone to a display via a USB cable, allowing video output to the display. <Product Variations> Various types with Type-C and Type-A connectors *There is also a lineup with Type-A male/female connectors that can be used as a relay cable.
Thin! Soft!
It is a thin and flexible LAN patch cord with excellent adaptability, allowing for easy wiring even in tight spaces.
By connecting the cable, the data stored in the vehicle is retained.
This product is a memory backup cable specifically for 12V vehicles. When replacing the battery, by using a backup battery and connecting this cable, it retains the data stored in the vehicle. It comes with a check lamp to confirm a proper connection and a backflow prevention device. 【Features】 ■ For 12V vehicles only ■ Retains data stored in the vehicle ■ Includes a check lamp to confirm a proper connection ■ Equipped with a backflow prevention device *For more details, please refer to the PDF document or feel free to contact us.
A long-term test lasting about one year was conducted! The favorable characteristics of high-temperature superconducting cables were confirmed.
Sumitomo Electric and Tokyo Electric Power Company, together with the Central Research Institute of Electric Power Industry, conducted a long-term test of approximately one year on the "three-core bundled high-temperature superconducting cable," which was successfully completed, confirming the excellent characteristics of the high-temperature superconducting cable. 【Cable System Specifications】 ■ Rated Voltage: 66kVrms ■ Rated Current: 1kArms ■ Rated Capacity: 114MVA Superconducting Cable ・ Type: Three-core bundled ・ Length: 100m ・ Insulation: PPLP (Poly-Propylene Laminated Paper) liquid nitrogen impregnated ・ Three-phase branching: 2 ・ Terminals: 6 (air terminals) ■ Installation: Above ground installation (partially installed in 150mm conduit) ■ Cooling System: Supercooled liquid nitrogen circulation *For more details, please refer to the PDF document or feel free to contact us.
Long-term power transmission tests conducted on the actual system! Successfully replaced with superconducting cables and connected to the actual system!
Approximately 3.2 km between two substations in Albany City, a superconducting cable line of about 350 m was constructed, and long-term power transmission tests were conducted in an actual system. On July 20, 2006, the long-length superconducting cable was connected to the actual system, and until the completion of the first phase in May 2007, it supplied power to about 70,000 households in Albany City for approximately 7,000 hours. Additionally, as part of the second phase, in January 2008, a 30 m section was replaced with a superconducting cable using YBCO wire, successfully connecting to the actual system. Then, a long-term transmission test on the actual line, lasting over a total of one year, was successfully completed in April 2008. 【Specifications of the Cable System (Partial)】 ■ Rated Voltage: 34.5 kVrms ■ Rated Current: 800 Arms ■ Superconducting Cable ・ Type: Three-core bundled superconducting cable ・ Length: 350 m (320 m + 30 m) ・ Insulation: PPLP (Poly-Propylene Laminated Paper), liquid nitrogen impregnated ・ Accessories: 2 gas-insulated terminal joints (underground) *For more details, please refer to the PDF document or feel free to contact us.
Through the cable to the next stage. A reliable product lineup that anticipates the times.
This catalog introduces the cables handled by Kansai Communication Wire. It features the "Triple Shield Coaxial Cable for CATV" with a triple shield structure, as well as "High Foam and Foam Type Coaxial Cables," "Coaxial Cables Type C and D," and "PVC Indoor Communication Wires and Vinyl Flat Cords." Our company actively engages in the development and manufacturing of products that are needed, flexibly responding to changes in the times. [Contents (Excerpt)] ■ 75Ω Coaxial Cables ■ 50Ω Coaxial Cables ■ N-Type Connectors ■ EM (Eco-Material) Cables ■ RG Coaxial Cables *For more details, please refer to the PDF document or feel free to contact us.
Cable with remaining quantity display (with length mark)! It is stable up to a frequency range of 500MHz.
The "(EM)UTP-C6A" is a GIGA School compatible cable that uses environmentally friendly LSZH materials and suppresses twisting with slits. It is stable up to a frequency range of 500MHz. It is compatible with alien crosstalk. It is easy to pull out with a resin reel. 【Features】 ■ Stable up to a frequency range of 500MHz ■ Compatible with alien crosstalk ■ Easy to pull out with a resin reel ■ Includes a remaining quantity indicator (with length marks) ■ Suppresses twisting with slits *For more details, please refer to the PDF document or feel free to contact us.
Processing has become easier, and it can be inserted as is! Here is an introduction to our outdoor thin cables.
This is an introduction to our outdoor thin diameter cable 'UTP-C5E-W'. It complies with the ANSI/TIA- C568C.2 standard, with a conductor diameter of 0.50mm and an outer diameter of 5.7mm. It is easy to process and can be plugged in directly. Additionally, the outer sheath is made of PE (polyethylene), making it resistant to damage during installation. Furthermore, it comes with length markings for easy tracking of remaining cable. 【Features】 ■ The outer sheath is made of PE (polyethylene), making it resistant to damage during installation ■ Simplifies the installation process ■ Length markings for easy tracking of remaining cable ■ Easy to process ■ Can be plugged in directly *For more details, please refer to the PDF document or feel free to contact us.
Cable assembly capable of long-distance transmission of 4K video signals! Enables reduced diameter, lower attenuation, and lower skew. *Catalog available.
The long-distance transmission cable assembly for 4K video signals achieves small diameter, low attenuation, and low skew by using our original RUOTA in the differential core. We offer unique products such as the high-performance coaxial cable RUOTA and the high-frequency cable assembly Wavemolle. ◆ High-performance coaxial cable RUOTA: Suitable for applications such as semiconductor testing equipment and 5G devices. ◆ High-frequency cable assembly Wavemolle: Supports DC to 130GHz. Phase adjustment is also available. ◆ Narrow pitch multi-pole coaxial connection system: Allows multiple coaxial lines to be connected collectively up to DC to 67GHz. *For more details, please download the catalog or feel free to contact us.
The device shape and a wide variety of connectors allow it to adapt to various usage environments!
This product is a coaxial cable assembly that can be used in the microwave frequency range from DC to 110 GHz. It offers a wide variety of terminal connector options, providing suitable cables for each frequency band. We have newly added a soft jacket type to our lineup, enabling "plug-jack conversion of the same type of connector," as well as "plug-jack conversion of different types of connectors" and "light angle shapes with no characteristic degradation (angle specification available)." 【Features】 ■ A flexible cable assembly that can be used over a wide frequency range ■ Excellent phase stability against temperature changes and bending ■ Uses precision connectors that can be repeatedly attached and detached ■ Quick response for orders starting from one piece at the specified length ■ Accommodates requests for phase adjustment *For more details, please refer to the external link page or feel free to contact us.
Coaxial cable assembly for microwave applications compatible with DC to 145GHz. Contributes to reducing cable diameter and loss. Available for order from a single unit.
"Wavemolle" is a microwave coaxial cable assembly compatible with DC to 145GHz. It features low attenuation and reflection, enabling high-reliability signal transmission, evaluation, and measurement. It has minimal phase variation with temperature changes, and the reduction in cable diameter and loss contributes to the miniaturization and energy efficiency of base station equipment. Orders can be placed for a single unit at the specified length. 【Features】 ■ Flexible structure with high flexibility ■ Various types including plug-jack conversion, mixed connector conversion, angled type, and flexible armor type, offering a wide range of terminal connector variations ■ Multiple phase adjustments available (optional) *For more details, please refer to the materials. Feel free to contact us with any inquiries.
For wiring such as semiconductor testers. Characteristic impedance is stable in the longitudinal direction. Unique hollow structure also reduces phase variation.
The coaxial cable "RUOTA" features a unique hollow structure with a uniform air layer in the longitudinal direction, ensuring stable characteristic impedance along that direction. It exhibits minimal phase variation in response to temperature changes, which helps reduce phase differences between cables. Additionally, it achieves lightweight design by minimizing diameter and resin usage. You can choose from three series, including the "THPC series," which is suitable for semiconductor tester wiring and internal equipment wiring, based on your application. 【Features】 ■ Stable characteristic impedance in the longitudinal direction ■ Minimal phase variation due to temperature changes ■ Allows for fine diameter and low loss, enabling high-density (narrow pitch) wiring ■ Contributes to improved work efficiency due to its fine diameter and lightweight design *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Mainly a purchase and sales (recycling) service for electric wires coated with rubber, specifically tin lead wires.
Our company offers a purchase and sales (recycling) service for electric wires (captive wire cables). Captive wire cables are electric wires primarily made of tinned copper wire covered with rubber. Please feel free to contact us if you have any inquiries. [Overview] ■ Electric wires primarily made of tinned copper wire covered with rubber *For more details, please refer to the PDF document or feel free to contact us.
