Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
61～75 item / All 82 items
For ensuring safety around automatic doors and shutters. Microcell J.
Microcell J is an auxiliary photoelectric sensor for ensuring safety around automatic doors and shutters. It features a compact design, comes with a connector for easy installation, and has high waterproof performance (IP65). With FlexIR technology, there is no worry about damage. For more details, please contact us or refer to the catalog.
This product has successfully achieved miniaturization using a manufacturing method called Amarga, developed by Xidas Corporation.
Dielectrophoresis (DEP) is a method that utilizes a high-intensity alternating electric field gradient to sort small particles, such as cells, based on their dielectric properties. Cells that exhibit a specific polarity are attracted to (or repelled by) the electric field gradient. As these cells flow through the stream, they deviate from the main flow, allowing them to be removed or collected for future use. XIDAS manufactures highly robust and efficient DEP flow cell products (patent pending) that enable the easy introduction of heterogeneous cell populations and allow for their sorting as they flow through the flow cell. XIDAS's DEP devices use three-dimensional floating electrodes to generate the maximum electric field gradient at the center of the flow stream. Additionally, the design of the flow cell can ensure that cells are maximally exposed to the electric field. A common application of DEP sorting is to eliminate dead cells and concentrate viable cell samples.
Long-selling semi-drive rotting device
The Transblot SD cell enables economical and efficient blotting in a short time without the need for a buffer tank or gel cassette. 【Features】 ○ Blotting can be performed in just 15 to 60 minutes ○ Economical due to low buffer usage ○ Can transfer four mini protein precast gels or homemade gels, or three Criterion gels at once ○ Easy setup of the cathode plate ○ Reproducible transfers are possible with platinum-coated titanium anode plates and stainless steel cathode plates, offering excellent durability For more details, please contact us.
This is the wide gel electrophoresis tank that can simultaneously run up to 26 samples!
The Criterion cell is an electrophoresis tank designed to run wider midi gels than standard mini gels, allowing for the electrophoresis of one or two Criterion gels at a time. A single Criterion gel can accommodate up to 26 samples. Additionally, it can perform the second dimension SDS-PAGE using an 11 cm IPG ReadyStrip. 【Features】 - Compact design that can run with less than 1L of running buffer - Gel cassette with an upper buffer chamber for easy setup in the electrophoresis tank - Safe and easy-to-open gel cassette - Wide gel, making it ideal for multi-sample electrophoresis - Second dimension electrophoresis can be performed within one day For more details, please contact us.
Installation completed in just a few hours. Continuous operation improves work efficiency. Moreover, it's space-saving.
We offer a "Standardized Palletizing Cell" utilizing collaborative robots from FlexLink. It is very compact and has a proven track record of saving over 50% of installation space by replacing industrial robot cells. It can be installed quickly, and there is no need for additional fence systems or cages. Safe operations can be conducted even close to the robot. 【Features】 ■ Easy to move modular design ■ Low running costs, achieving ROI in a short period ■ Quiet design operating at 68.9 dB(A) ■ Engineering tools available for designing units in a short time *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Successful Improvement Case Study 2: Metal Vapor Deposition Cell KMDW-Cell
◆◇◆Background◆◇◆ The conventional metal deposition method uses a boat system, applying a large current of over 100A when depositing the metal film. While the boat system allows even beginners to easily perform deposition, the use of high currents is considered a factor that negatively affects the quality of the film. Additionally, the amount of scattering during deposition is significant, requiring frequent maintenance of the chamber, making it difficult to use in a clean environment.
Developed for the assembly of various small parts in small quantities, it is possible to automatically apply adhesives, pastes, etc., by combining microscope observation, dispensers, and other tools during operation.
◆Application We undertake the development of equipment utilizing your special know-how. ◆Development Procedure Needs analysis → Conceptual design → Detailed discussions → Quotation specifications → Order → Manufacturing → Factory inspection → Joint trial operation debugging and adjustments → Joint final debugging and adjustments → Delivery to your company ◆By jointly conducting specification discussions and debugging adjustments upon completion of the equipment with your company's representatives, the equipment will become user-friendly, enabling vertical startup after delivery. ◆All equipment manufactured in the fiscal year 2001 (Type 21) has achieved actual operation within two days of delivery.
Easy introduction and immediate operation! Introduction of application-specific robot cells.
The "TM Palletizing Operator TM12" is a complete application-specific robot cell that is ready to use immediately. It comes standard with software that is easy to program with intuitive operation. Programming does not require special skills, allowing for reductions in time and cost. Setup can be done easily in five steps. 【Features】 ■ Safety functions at the robot cell level with 16 types of certifications ■ Palletizing programs can be created in as little as 5 minutes ■ TMStudio Palletizing Wizard: simulates stacks and detects collisions ■ Software that is easy to program with intuitive operation is included as standard ■ Programming does not require special skills, allowing for reductions in time and cost *For more details, please refer to the PDF materials or feel free to contact us.
Septum height 28 mm (TBTC0). "Ultra-small" open TEM cell that enables immunity testing at a low cost.
Model: TBTC0 Length: 390 mm Width: 100 mm Height: 62 mm Septum Height: 28 mm Rectangular Area Under the Septum: 19 cm x 7 cm x 2.8 cm TEM Cell Connector: N-Female Nominal Cell Impedance: 50 Ohm Wave Impedance: 377 Ohm Maximum RF Input Power: 10W (limited by supplied 50 Termination) Input Return Loss: S11 Maximum 3.15GHz < -15dB Wave Loss: Maximum 3GHz < 3dB, Maximum 6GHz < 4dB
We propose EVE Energy's cylindrical cells (18650 and others), which are attracting global attention, from power tools to mobility battery energy storage systems.
EVE Energy (Guangzhou Yuwei Lithium Energy) is a battery manufacturer that is attracting global attention, responsible for supplying large cylindrical batteries for EVs to BMW in Europe. ■■■ For product details, please refer to the related links below. ■■■ Recent trends of the company: - In the long-term plan for 18650 and 21700, the total capacity is expected to reach 3 billion cells. - LFP cylindrical cells (IFR33140 and 40135) began mass production in 2022. - The first 4695 will be mass-produced in 2023, with a total capacity of 21GWh. - Launched a marine container-type mobile power supply certified by CCS (China Classification Society). - Established a new company in Malaysia (EVE Malaysia Sdn Bhd). If you are considering procuring EVE Energy products, please feel free to contact Fulogic Corporation. === Please feel free to contact us === MAIL product@fulogic.com TEL 03-6380-5928
MBE cells (molecular beam epitaxy sources) are important for the quality of epitaxial films. We introduce the MBE cells from RIBER, a company with a proven track record.
The MBE cell that generates molecular beams is the most important component that influences the quality of epitaxial films (uniformity, composition, purity, morphology, etc.). RIBER offers a wide range of products tailored to material characteristics and applications. Customization proposals can be made not only for RIBER's original equipment but also for all types of MBE equipment specifications. - Standard Knudsen cell - Valved cracker cell for arsenic, phosphorus, and antimony - High-capacity, high-stability gallium and indium cells - High-resistance effusion cells for nitrides - Special purpose cells (high-temperature cells, sublimation carbon cells) - Nitrogen and oxygen RF plasma sources - High-temperature and low-temperature gas injectors
Excellent sound absorption, flame retardancy, and safety, lightweight and can be cut with a cutter, making installation easy! *Available for sale from one sheet.
ACUSTICELL" is a melamine resin foam material with a precise continuous bubble (open-cell) structure that exhibits excellent sound absorption performance. It produces almost no fine particles during cutting, has no adverse effects on the eyes or throat, and does not irritate the skin, making it comfortable to work with. Additionally, there are no concerns about adverse effects on the human body due to particle dispersion from aging deterioration after installation, as is the case with glass wool. 【Features】 - Very lightweight with a density of approximately 9kg/m3 - Easy to install due to excellent flexibility - Self-extinguishing and demonstrates high flame resistance (UL94 V-O) - Sufficiently withstands regular use temperatures of 150°C (maintains flexibility even in extreme low temperatures) - Does not deteriorate into powder due to hydrolysis like polyurethane foam *Available for sale in single sheets. We also provide estimates. *We can introduce construction companies. Please feel free to contact us. *If you would like a sample, please fill out the inquiry form with your intended use and write "Sample Request.
Phoenix Diffusion Cell Dry Heat System - A NEW vertical diffusion cell (Franz cell) system that solves various issues related to release testing!
Hanson Research, a top-class manufacturer of diffusion cell systems, has released the "Phoenix RDS" and "Phoenix DB-6," vertical diffusion cell (Franz cell) systems that comply with USP and JP standards, setting a global standard. With a compact design featuring dry heat and stirring functions in a 6-cell block, it does not require a large space. The manually sampled "Phoenix DB-6" can be moved to an efficient working location for each test. Sampling is done through a withdrawal method from the sampling port, preventing an increase in internal pressure of the cell and avoiding liquid leakage or membrane deformation. The ease of applying ointments has also reduced variability factors due to cell preparation. The automated sampling "Phoenix RDS" allows testing of up to 24 cells with a single PC. It eliminates variability in test results caused by differences in techniques and operators, as well as human errors, allowing tests to be conducted without burdening key analysts. It enables unmanned long-duration testing, effectively utilizing resources to reduce costs.
It is a high-performance vacuum deposition source that can be used as a high-temperature heating cell for vacuum applications, with an organic deposition source up to 800°C and a metal deposition source up to 1500°C.
The OLED evaporation source is a high-temperature deposition source for vacuum deposition with a maximum operating temperature of 1500°C. By simply replacing the body without removing the fixed base, you can switch between cells for low-temperature organic deposition (up to 800°C) such as OLEDs and high-temperature heating (up to 1500°C) cells. If used as a source for vacuum film formation, a shutter actuator is also provided. When used as a high-temperature heater above 800°C, it features an internal shield structure designed with insulation and thermal shielding in mind. The shutter adopts a flip type. Even if multiple OLED sources are installed in the chamber, they will not interfere with other components. The crucible can be removed simply by taking off the upper cap, making the material filling and replenishment process hassle-free. The main body is available for 1cc crucibles (maximum filling amount 1.5cc) and 10cc crucibles (maximum filling amount 15cc), and can be exchanged by replacing the main body with the base without removing the fixed base from the chamber. Thermocouples can be specified as either K or C types. Crucibles can be selected from alumina (standard), quartz, PBN, and carbon.
A must-see for researchers! The gap range of the evaluation cell has been expanded to 0.7 to 100 μm! [Over 10,000 types]
It is ideal for research tools for liquid crystal materials and other advanced materials. Thanks to our technological advancements, we have successfully expanded the gap range of evaluation cells! Until now, measurements could only be taken within the range of 2 to 50 μm, but we are now able to measure 0.7 to 2 μm and 50 to 100 μm, which were considered difficult in the industry. Additionally, specifications within ±0.2 μm are now possible, allowing us to meet detailed needs. We offer over 10,000 product classifications and can customize according to your requirements. [Contents] - Explanation of display examples and display symbols - Orientation diagrams by type - Price list - Glass substrates For more details, please contact us or download the catalog.
