coatingのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

coating×吉田ＳＫＴ - メーカー・企業と製品の一覧

coatingの製品一覧

91～105 件を表示 ／ 全 137 件

表示件数
For applications that cannot be satisfied with fluorine or silicone! Non-stick coating.

For applications that cannot be satisfied with fluorine or silicone! Non-stick coating.

Experience excellent non-stick properties for applications that cannot be satisfied with Teflon or silicone coatings! Anti-stick coating.

To prevent adhesion of sticky substances, fluoropolymer coatings (Teflon™ coatings) and silicone coatings are commonly used, but the following challenges may arise: [Challenge 1] Even with surface treatments claiming to prevent sticking, there was not much change. [Challenge 2] It started sticking unexpectedly quickly during use. [Challenge 3] Silicone coating transfers and causes defects in the bonding process (fluoropolymer did not provide sufficient effectiveness, leading to the choice of silicone). Recently, there has been an increase in customers needing solutions for more adhesive materials, such as wanting to release molten resins that do not fully solidify to shorten processing time. "Yoshida SKT has coatings that can improve such situations." With general fluoropolymer coatings, sticky substances can adhere due to various factors. In response, treatments that create a rough surface to reduce the contact area with sticky substances are known. Our company has a unique technology to create convex surfaces using fluoropolymer and is now offering a kit to experience its effects for free! ▼ You can apply from the official Yoshida SKT website below.

  • Other conveying machines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Prevents adhesion even with high-temperature adhesives! Strong against scratches and peeling - non-stick coating.

Prevents adhesion even with high-temperature adhesives! Strong against scratches and peeling - non-stick coating.

In general fluoropolymer coatings, it is difficult to prevent adhesion with high-temperature adhesives. Here are examples of coatings with excellent release properties and resistance to film damage.

■Concern The customer's adhesive manufacturer was producing various products by stirring and mixing adhesives in stainless steel beakers. During this process, the adhesive would stick to the inner walls of the beaker, preventing proper mixing, so a good non-stick coating was needed. ■Background The customer was already using a fluororesin coating. However, the stirring of the adhesive was conducted at high temperatures above 200°C, and issues arose where the coating would peel off due to contact between the beaker and the stirring blades, leading to contamination of the product with foreign substances. Therefore, they were looking for a coating that offered higher non-stick properties and was less likely to peel off due to scratches. ■Adopted Coating FSR (Fluoro Super Release) HR-3110R ■Adoption Process and Effects Initially, tests were conducted with CHC coat, which has high film hardness even at high temperatures, but some adhesion and film peeling occurred. Therefore, tests were conducted with FSR, which excels in non-stick properties in high-temperature environments. After testing with samples, the beaker was treated with "FSR HR-3110R." As a result, it exhibited non-stick properties that were incomparable to the fluororesin coating, and after about a month of use, there was almost no scratching or peeling of the coating, leading to its adoption.

  • Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin Coating: "What is a Coating with Excellent Corrosion Resistance?"

Fluororesin Coating: "What is a Coating with Excellent Corrosion Resistance?"

Fluororesin has excellent chemical resistance and is suitable for applications that require corrosion resistance and purity. The coating protects metals and prevents the leaching of metal ions.

◆Features of Fluororesin Coating with Excellent Corrosion Resistance◆ ■Chemical Resistance of Fluororesin Fluororesin is chemically stable, so it is not affected by most acids, alkalis, or other chemical agents, and ions do not dissolve and leak out. ■Pinhole-Free Coating Technology By applying a fluororesin coating without electrical pinholes to substrates with shapes that cannot be lined with sheets or rotationally molded, we protect against highly corrosive liquids and gases such as acids and alkalis, and prevent the leaching of metal ions from the substrate. ■Prevention of Liquid Penetration and Excellent Blister Resistance Compared to standard fluororesin coatings, our MY lining significantly reduces blister formation and offers a lifespan over ten times longer, with a maximum film thickness of up to 2000μm possible due to our unique processing technology (depending on substrate conditions). With this technology, we provide fluororesin coatings with excellent corrosion resistance. *For more details, please refer to the catalog or contact us directly.

  • Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin Coating: "What is the difference in fluororesin?"

Fluororesin Coating: "What is the difference in fluororesin?"

I will explain the differences between the representative fluororesins "PTFE," "PFA," and "FEP."

Types and Characteristics of Representative Resins for Teflon Coating and Fluororesin Coating ■ Resin Name PTFE (Polytetrafluoroethylene) ■ Characteristics It has the highest continuous use temperature of 260°C, and in addition to heat resistance, it also excels in non-stick properties and low friction characteristics. ■ Alternative Name Tetrafluoroethylene, 4F ■ Resin Name PFA (Perfluoroalkoxyalkane Polymer) ■ Characteristics An improved resin of PTFE, it has the same continuous use temperature of 260°C as PTFE. It has a low thermal melt viscosity, allowing for a continuous coating with fewer pinholes that could not be achieved with PTFE, making it the best-performing fluororesin for corrosion-resistant coatings. Additionally, PFA is superior in non-stick properties compared to PTFE for certain applications, making it suitable for high-temperature release coatings. ■ Resin Name FEP (Perfluoroethylene Propylene Copolymer) ■ Characteristics An improved resin of PTFE, but with lower heat resistance than PTFE. It can achieve a smooth coating with fewer pinholes through sintering. ■ Alternative Name 4F6F, Tetrafluoro-hexafluoropropylene

  • Secondary Cells/Batteries

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Teflon Coating: An Explanation for Those Considering Implementation

Teflon Coating: An Explanation for Those Considering Implementation

What are the key points when processing Teflon coating for production equipment? We are offering a guide that explains three important checkpoints!

Introduction of Teflon coating to in-house equipment. When customers consult about Teflon coating, do you have any of the following concerns? - I don't really know where to start... - I'm not familiar with Teflon coating at all... For those who want to know more about the introduction of Teflon coating, we have prepared a "Guide to Introduction." The document is structured based on actual cases with three key checkpoints. To smoothly proceed with the introduction of coating, we clearly explain what you should check in advance and what you need to understand. [Document Overview] 1. The purpose of introducing coating 2. The materials to be coated 3. The usage environment and conditions for coating In fact, by introducing Teflon coating to production equipment, we have received feedback from customers such as: - "Adhesion of paint to jigs has decreased." - "Cleaning time has been reduced." - "Defective products have decreased, and productivity has improved." *For more details, please download the document or contact us.

  • Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating: What is "corrosion resistance of thick film coating"?

Fluororesin coating: What is "corrosion resistance of thick film coating"?

Teflon fluoropolymer, used for corrosion-resistant lining to protect substrates from chemicals. This explains the corrosion resistance of thick fluoropolymer coatings.

■ What is "corrosion resistance"? "Corrosion resistance" refers to the property of being less prone to corrosion reactions and oxidation. In the field of corrosion prevention, which requires corrosion (anti-corrosion) properties, terms such as "light anti-corrosion" and "heavy anti-corrosion" may be used depending on the degree of corrosiveness. You can find detailed information in the PDF document below. ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー 1. What is corrosion resistance? 2. How to prevent corrosion 3. Corrosion resistance of Teflon fluoropolymer coatings 4. Characteristics of Teflon fluoropolymer coatings for corrosion-resistant applications 4-1. No pinholes or defects in the coating film 4-2. Thickening of the coating film 5. What can be achieved by utilizing the corrosion resistance of Teflon fluoropolymer coatings ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー * For more details, you can download the document or view it at the link below. ▼ "Protecting the substrate from chemicals!" Explanation of the corrosion resistance of Teflon fluoropolymer coatings ▼

  • Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating "Strong against thermal environments with composite technology with ceramics"

Fluororesin coating "Strong against thermal environments with composite technology with ceramics"

A coating technology that minimizes the decrease in film hardness even in high-temperature environments by combining fluororesin and ceramic!

CHC (Ceramic Hard Coat) is a new type of fluoropolymer coating that achieves both non-stick properties and high film hardness at elevated temperatures, comparable to standard fluoropolymer coatings. ■ Features - Non-stick properties equivalent to PTFE and PFA - High film hardness at temperatures above 200°C (compared to PTFE) * Based on internal testing ■ Applications - Resin welding plates - Resin molding molds - Heater plates * For detailed product information, please download the PDF or refer to the link below.

  • Resin mold

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
What is fluororesin coating (Teflon coating)?

What is fluororesin coating (Teflon coating)?

It has the property of repelling water and oil well, even when they are on the surface! It is also resistant to cold and can withstand low temperatures of -250°C.

"Fluororesin coating (Teflon coating)" is a surface treatment that imparts various properties of fluororesin to the surface of materials, achieving prevention of sticking and adhesion, reduction of friction, and protection of the materials. It exhibits excellent release properties even against strongly adhesive substances and is rarely affected by or corroded by chemicals such as acids and alkalis. The Teflon coating on household frying pans is an example of a fluororesin coating that utilizes the non-stick and heat-resistant characteristics of Teflon fluororesin to make it difficult for food to stick to the frying pan. 【Features and Effects】 ■ Non-stick: Excellent release properties even against strongly adhesive substances ■ Water and oil repellency: Effectively repels water and oil on the surface ■ Heat and cold resistance: Withstands high temperatures (up to 260°C) and low temperatures (down to -250°C) ■ Low friction: Has a low coefficient of friction, making it slippery ■ Chemical resistance: Rarely affected by or corroded by chemicals such as acids and alkalis ■ Electrical properties: High dielectric strength (resistance to dielectric breakdown), volume resistivity, and surface resistivity *For more details, please refer to the related links or feel free to contact us.

  • Coating Agent

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Teflon Coating "Method for Measuring Film Thickness"

Teflon Coating "Method for Measuring Film Thickness"

To use Teflon coating for a long time, not only selection and processing technology are important, but also quality inspection. Let me introduce Yoshida SKT's quality inspection.

Here, we will introduce the measurement inspection of Teflon coating thickness. When you consult about Teflon coating, if a thickness is agreed upon during the meeting, we will conduct a thickness measurement inspection during the post-processing inspection process to confirm whether the thickness has been processed according to the meeting or the order form. ■ Unit of Thickness In coating thickness measurement, the unit commonly used is "μm (micrometers)" = one-thousandth of a millimeter. ■ Specifications of Thickness The thickness varies depending on the specifications and applications. For fluororesin coatings, it is often around 20-50μm for general purposes and more than 300μm for corrosion-resistant applications. ■ Measurement Method In thickness measurement inspections, a thickness gauge is primarily used for confirmation. This method is a non-destructive type of inspection that does not damage the coating. The thickness gauge typically measures the thickness of the coating by pressing a probe, known as a "probe," vertically against the surface of the coating processed on the metal substrate. *For more details about the thickness measurement inspection, please visit our website via the link or contact us.

  • Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Teflon Coating "Method of Pinhole Inspection"

Teflon Coating "Method of Pinhole Inspection"

To use Teflon coating for a long time, not only selection and processing technology are important, but also quality inspection. Let me introduce Yoshida SKT's quality inspection.

Why is it a problem if there are pinholes in the Teflon coating film in the first place? In a typical fluororesin coating (thickness: 20-50 μm), there are countless holes (pinholes) that are invisible to the eye and reach the substrate. For applications that require non-stick or slippery properties, these pinholes rarely have a negative impact on performance. However, in applications where corrosion resistance is required, chemicals can reach the substrate (metal) through the pinholes, causing corrosion and leading to holes or causing the coating to peel off. To eliminate pinholes, the coating can be thickened by applying multiple layers, ensuring that there are no pinholes that connect the coating surface to the substrate. At Yoshida SKT, we conduct inspections using insulation resistance meters, pinhole testers, and chemical detection methods according to the coating specifications and substrates. These methods are non-destructive tests that do not damage the coating film. *For more details on pinhole inspection, please visit our website via the link or contact us.*

  • Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Countermeasures for mold release troubles in injection molding machines: ultra-durable fluorine-based organic coating.

Countermeasures for mold release troubles in injection molding machines: ultra-durable fluorine-based organic coating.

Amazing durability that surpasses fluoropolymer coatings! Surface treatment suitable for applications with mechanical loads. *Product and case materials available.

Super Durable Fluoropolymer-based Organic Coating System 'Bicoat(R)' "Surface treatment of inorganic materials with hardness and wear resistance, such as metals and ceramics" + "Surface treatment of organic materials with release and sliding properties, such as fluorine and silicone" With our unique surface treatment technology, we have achieved an ideal durability of "Release + Sliding + Wear Resistance" in our coating system. It withstands harsh usage areas such as injection molds, providing reliable release and sliding properties. Additionally, due to its excellent dimensional accuracy, it is suitable for areas requiring micron-level precision. 【Features】 ■ Incredible durability ■ High hardness and scratch resistance ■ Excellent wear resistance ■ Outstanding non-stick and release properties ■ Safe for use in molds requiring micron-level dimensional precision *For more details, please refer to the PDF document or feel free to contact us.

  • Other surface treatment equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Thin film fluoropolymer coating "NCFPC Series" with excellent lubricity.

Thin film fluoropolymer coating "NCFPC Series" with excellent lubricity.

Super-thin film fluorine coating with excellent water and oil repellency!

The "Nano Process NCFPC Series" features an ultra-thin fluorine coating that excels in liquid repellency, such as water and oil, compared to fluoropolymer coatings, improving liquid drainage and flow. It causes almost no dimensional changes and maintains optical properties, making it possible to process "precision parts" and in fields that require high dimensional and surface accuracy, where fluoropolymer coatings have previously been difficult. <Examples of Applications> - Improvement of liquid drainage for water and oil - Improvement of liquid flow for water and oil - Prevention of oil diffusion in bearing components, etc. Additionally, Nano Process has been renewed with three other new functions, each with different features and applications. [Features of Each Series] ■ TC-10S Excellent precision, visible light transmittance, water repellency, and oil repellency ■ TLS Series Superior non-stick properties against adhesive materials like tape ■ HP Series Excellent hydrophilicity Currently, we are offering technical materials summarizing the details of each series. If you are interested in more details or are facing challenges with surface treatment in the precision field, please download the materials or contact us directly.

  • Other semiconductors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Urethane Coating 'CD9200 Ultra High Hardness Custom Production Grade'

Urethane Coating 'CD9200 Ultra High Hardness Custom Production Grade'

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be processed on chemical wood and plastic as well.

The "Urethane Coating CD9200" is a room temperature curing type coating that excels in abrasion resistance and soundproofing, and can be processed onto any material except for liquids and gases. ■ Specifications Usable temperature ... -30℃ to 100℃ Hardness ... approximately 64D Friction coefficient ... 0.33μ (measured value) ■ Applications Higher hardness than CD9100. A urethane coating with hardness comparable to engineering plastics. * Made to order only. Additionally, if you require a specific color, please feel free to consult with us. 【Features】 ■ Excellent abrasion resistance and soundproofing ■ Can be applied in various locations ■ Protects materials and equipment with coating ■ Cures at room temperature, making it suitable for various materials * For more details, please refer to the PDF document or feel free to contact us.

  • Coating Agent

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Thin Film Coating: "Nano Process with Excellent Non-Stick Properties for Adhesive Materials"

Thin Film Coating: "Nano Process with Excellent Non-Stick Properties for Adhesive Materials"

A thin film coating with excellent non-stick properties that prevents adhesion. It helps to prevent sticking of blades.

The "Nano Process TLS Series" is a thin film coating that excels in non-adhesiveness, preventing sticky substances like adhesive tape from sticking. A film thickness of about 1μm is achievable, allowing for minimal dimensional changes while maintaining optical properties. This makes it possible to process "precision parts" and in fields that require high dimensional and surface accuracy, where fluororesin coatings have been difficult to apply. <Examples of Applications> - Non-adhesiveness for products with high adhesive strength, like adhesive tape - Prevention of adhesion for electronic component sealing materials - Prevention of adhesion for hot melt adhesives - Prevention of adhesion for silicone adhesives, etc. Additionally, Nano Process has been renewed with three other new functions, each with different features and applications. 【Series Features】 ■ TC-10S Excellent precision, visible light transmittance, water repellency, and oil repellency ■ NCFPC Series Excellent liquid slip properties for water and oil ■ HP Series Excellent hydrophilicity We are currently offering a technical document summarizing the details of the series. If you are interested in more details or are facing challenges with surface treatment in precision fields, please download the document or contact us directly.

  • Other semiconductors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ceramic Coating: "Achieving both high-temperature release and high-temperature durability in the thermal welding process."

Ceramic Coating: "Achieving both high-temperature release and high-temperature durability in the thermal welding process."

It is a coating technology that maximizes "non-stick and release properties" by combining ceramics and fluororesins.

CHC (Ceramic Hard Coat) is a new type of fluoropolymer coating that combines the non-stick properties of conventional fluoropolymer coatings with high film hardness at elevated temperatures. ■Features - Non-stick properties equivalent to PTFE and PFA - High film hardness at temperatures above 200°C (compared to PTFE) *Based on internal testing ■Applications - Resin welding plates - Resin molding molds - Heater plates - Heat sealers *For case studies and product details, please see the link below.

  • Resin mold

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

coatingに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.