We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for door.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

door Product List and Ranking from 151 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.

door Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.

  1. サンワイズ 本社 Shizuoka//Building materials, supplies and fixtures
  2. ソシアパーティション （旧　株式会社コマツパーティション） Tokyo//Other manufacturing
  3. 神谷コーポレーション湘南 Kanagawa//Building materials, supplies and fixtures
  4. 4 トーシンテック Aichi//Automobiles and Transportation Equipment
  5. 5 エヌビーシー Shizuoka//Building materials, supplies and fixtures
Go to Company Ranking

door Product ranking

Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.

  1. In case of an emergency in the restroom, we can respond quickly! 【Emergency Unlock Panic Open】 ソシアパーティション （旧　株式会社コマツパーティション）
  2. Taxi Automatic Door Product List トーシンテック
  3. Inspection hatch (made of galvanized steel) Z-door FAD type フカガワ
  4. 4 Sliding Door 'GA Type Stabilizer' 応緑 (オーリョク)
  5. 5 Full height door [fit] 神谷コーポレーション湘南

door Product List

406～420 item / All 614 items

Displayed results
FIT GATE construction example: shutter gate + general gate (private residence)

FIT GATE construction example: shutter gate + general gate (private residence)

Change the roof to a slab roof, install the supplied downlights inside the factory, and manufacture as one unit.

We would like to introduce a case where we manufactured and delivered a FIT GATE as a shutter gate for a private residence in a certain location in Osaka Prefecture. Due to the deep design, the roof was made as a slab roof, and the supplied downlights were installed in the factory, creating a one-unit product. After the installation of the structure, the construction company carried out wall finishing and it was completed. A gate was installed behind the wall, which also serves as an entrance. [Case Overview] - The roof was made as a slab roof due to the deep design. - Supplied downlights were installed in the factory, creating a one-unit product. - Approximately W6,050mm × H2,925mm; installation time was about 3 hours. *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + general gate + fence

FIT GATE construction example: shutter gate + general gate + fence

After installation, measure the exact dimensions to ensure it can be securely enclosed from the general door to the residential baseboard, and then proceed with manufacturing!

We would like to introduce a case where a shutter gate and a side gate were manufactured and delivered by FIT GATE as part of a renovation project around the entrance of a private residence in Gifu Prefecture. Due to the height of the shutter gate, it was manufactured with a split structure, and as an option, rain gutters were installed on the back of the roofs of both the shutter gate and the side gate to facilitate rainwater management. The eaves of the side gate are covered with wood-like siding, creating a design that connects with the residential area. [Case Overview] ■ Shutter Gate: Approximately W3,900 × H3,125 mm ■ Side Gate: Approximately W2,850 × H2,640 mm ■ FIT HIGH-WALL: Approximately W3,820 (outer diagonal) × H2,350 mm *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + general gate + privacy wall

FIT GATE construction example: shutter gate + general gate + privacy wall

It is possible to install a privacy wall without the need for a retaining wall and without narrowing the parking space!

We would like to introduce a case where two shutter gates, a passage gate, and a privacy wall were integrated into a single gate. Although it is a large structure, all parts were delivered to the site on the same day, and the connection work was carried out. The gate is taller than the shutter gate at H3,100mm, but since it is constructed with a steel frame, it does not require supporting walls, allowing for the installation of the privacy wall without narrowing the parking space. 【Case Overview】 ■ Total Length: Approximately W15,415 × H3,100mm ■ Shutter Gate: Approximately W15,235 × H2,925mm (Effective Opening: W5,660 × H2,385mm) ■ Privacy Wall (FIT HIGH-WALL): Approximately W7,300 × H3,100 × D130mm ■ Installation Time: 5.5 hours *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + general gate 4

FIT GATE construction example: shutter gate + general gate 4

Designed for rainwater management through drains in a sloped roof! Introducing construction examples.

We have manufactured and delivered a large gate that integrates a shutter gate and a service entrance. Dimensions are approximately W13,000 × H2,925 mm, with an installation time of about 4 hours. Embedded products such as delivery boxes were installed in the factory using supplied materials, and due to the size of the large gate, it was manufactured in sections and connected on-site. 【Case Overview】 - Dimensions: approximately W13,000 × H2,925 mm - Installation time: about 4 hours - Embedded products such as delivery boxes were installed in the factory using supplied materials - The height of the service entrance was set lower when viewed from the back - Designed for rainwater management through drains with a slab roof - Finished as a cohesive gate that fits the width of the site *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: Shutter gate + privacy wall 1

FIT GATE construction example: Shutter gate + privacy wall 1

The integrated gate with aligned heights features a design that takes into account both flow and functionality!

We manufactured and delivered a gate that integrates a shutter gate and a privacy wall at a private residence in a certain location in Tokyo, using FIT GATE. The dimensions are approximately W8,250×H2,925mm, and the installation time was about 4 hours. Due to the large structure, the shutter gate and wall were manufactured separately and connected on-site. 【Case Overview】 ■ Dimensions approximately W8,250×H2,925mm, installation time about 4 hours ■ Adopted a built-in type that conceals the shutter case from the property side ■ Finished as a simple and user-friendly gate *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + privacy wall 2

FIT GATE construction example: shutter gate + privacy wall 2

Even with tall walls, it's possible to make effective use of space! Here are some construction examples.

We manufactured and delivered a gate that integrates a shutter gate with a tall wall at a private residence in Aichi Prefecture. The shutter gate and wall were divided into two parts for manufacturing and connected on-site. After the structure was installed, finishing work was carried out by the contractor, completing the gate. The presence of the wall not only provides privacy for the entrance but also enhances the luxurious feel unique to large gates. 【Case Overview】 ■ Approximately W9,650 × H2,925 mm ■ Installation time is about 4 hours ■ Luxurious feel unique to large gates ■ Finished with a functional and stylish gate area ■ Even with a tall wall, space can be effectively utilized *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + privacy wall 3

FIT GATE construction example: shutter gate + privacy wall 3

The wall extending to the back connects with the sleeve wall constructed of concrete blocks, creating a cohesive entrance area!

We would like to introduce a case where a gate that integrates a shutter gate and a privacy wall was manufactured and delivered. Due to the size of the gate, the shutter gate and privacy wall were manufactured separately and connected on-site. After the installation of the structure, the finishing work was carried out by the contractor. Ivory-colored tiles that matched the residence were applied, resulting in an elegantly finished gate. 【Case Overview】 ■ Approximately W8,140 × H2,925 mm (roof dimensions) ■ Installation time: about 5 hours ■ Finished with an elegant impression ■ A cohesive gate area *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 5

FIT GATE Construction Example: Shutter Gate 5

Introduction of a case where the roof of the shutter gate was made slightly larger at 150mm.

We would like to introduce a case where a shutter gate for two units was manufactured and delivered as a single unit FIT GATE. The dimensions are approximately W6,300 × H2,925 mm, and the installation time was about 3 hours. Normally, to allow for the carport roof to fit, the shutter gate's roof extends about 100 mm at the back, but this time we made it slightly larger at 150 mm. After the installation of the structure, finishing work such as tiling was carried out by the contractor. [Case Overview] ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 7

FIT GATE Construction Example: Shutter Gate 7

Introduction of a construction case where columns and beams were manufactured separately and connected on-site.

We would like to introduce a case where a shutter gate, with a part of the beam extended to serve as a roof for the approach, was manufactured and delivered by FIT GATE. Since the effective opening height of the shutter is H2500mm, the columns and beams were manufactured in segments and connected on-site. The extended beam, designed as a roof, was equipped with optional rain gutters to facilitate rainwater management. After the installation of the structure, the contractor applied the finishing touches, combining it with a stylish functional gatepost, resulting in a functional and fashionable gate. 【Case Overview】 ■ Dimensions: Approximately W8,685 × H3,225mm (total length) ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 11

FIT GATE Construction Example: Shutter Gate 11

The protruding roof in front has been fitted with downlights supplied during manufacturing.

We would like to introduce a case where a shutter gate designed with variations in the overhang and height of the roof and columns was manufactured and delivered by FIT GATE. Due to its height and depth, it was manufactured in sections and connected on-site. The downlights provided were installed during manufacturing on the protruding roof. After the structure was installed, finishing work was carried out by the contractor, completing the area around the gate. [Case Overview] ■ Dimensions: Approximately W6,480 × H3,125 mm (Effective opening W5,760 × H2,300) ■ Installation time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 12

FIT GATE Construction Example: Shutter Gate 12

We will introduce a case where each building was manufactured as a single unit and connected on-site.

We would like to introduce a case where a shutter gate with variations in depth was manufactured and delivered by FIT GATE. Each unit was manufactured as a single unit and assembled on-site. The front and back surfaces of each structure were aligned, creating a difference in depth. After the structure was installed, finishing work was carried out by the contractor. Although it is a simple gate, the difference in depth creates a spacious entrance and parking area. 【Case Overview】 ■ Dimensions: Approximately W8,700 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 13

FIT GATE Construction Example: Shutter Gate 13

The pipe shutter is installed in the factory and shipped. Installation work will be carried out after arrival at the site.

Here is an example of a shutter gate manufactured and delivered as a single unit. The pipe shutter was installed in the factory and shipped. It was transported using a 4-ton crane truck, and installation work was carried out after arriving at the site. After the frame was installed, the finishing work was done by the contractor, and a gray paint was applied to match the residence, resulting in a cool-looking gate. 【Case Overview】 ■ Dimensions: Approximately W6,090 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 14

FIT GATE Construction Example: Shutter Gate 14

Introduction of a case where the body setup was divided into two days, with approximately 3 to 4 hours of setup each day.

This is a case study of a shutter gate installed in a condominium, manufactured and delivered by FIT GATE. The installation of the structure was completed over two days, with approximately 3 to 4 hours of work each day. After the structure was installed, finishing work was carried out by the construction company, resulting in both buildings having a simple gate with a soft impression. [Case Overview] ■ Right side [Shutter Gate + Access Gate] - Approximately W7,370 × H3,075mm (at the highest point) - Effective opening of the shutter: Approximately W5,500 × H2,300mm ■ Left side [Shutter Gate] - Approximately W5,790 × H3,075mm - Effective opening of the shutter: W5,200 × H2,300mm *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 16

FIT GATE Construction Example: Shutter Gate 16

Introduction of a case where delivery was made directly to the site with one unit and installation was completed in a short time of about 2 hours.

We manufactured and delivered a FIT GATE to a private residence in a certain location in Tokyo. We installed the shutter in the factory and delivered a semi-finished structure with the base prepared as a single unit directly to the site, completing the installation in about two hours. After the structure was installed, the contractor carried out the finishing work, and the gate was completed. [Case Overview] ■ Dimensions: Approximately W5,850 × H2,925 mm (Effective opening of the shutter: W5,260 × H2,300 mm) ■ Installation time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: General gate (adjacent to entrance porch)

FIT GATE construction example: General gate (adjacent to entrance porch)

Delivery boxes and electrical conduits are installed with supplied items during manufacturing in the factory! Here are some construction examples.

Here is an example of a passageway gate manufactured and delivered by FIT GATE, connected to the entrance porch. The dimensions are approximately W3,750×H2,590mm. A delivery box, built-in mailbox, and electrical conduits were installed with supplied items during manufacturing at the factory. The installation of intercoms and other equipment was carried out by the construction company. 【Case Overview】 ■Dimensions: Approximately W3,750×H2,590mm *For more details, please refer to the related links or feel free to contact us.

  • others
  • door

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to door

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.