Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
346～360 item / All 523 items
Micro feeder capable of precise supply of 0.1 cc/min.
Utilizing the principle of a table feeder and adding a unique mechanism, it achieves the supply of powder in a precise, pulse-free manner, and is widely used for batch supply (small portions).
Supply, discharge, and lightweight supply of all powder and granular materials, starting with fine powder materials.
The small electromagnetic feeder, which has a rich track record in the supply and discharge of powder and granular materials, has become even easier to use. The small electromagnetic feeder "CF type" features a dedicated frequency-variable controller that eliminates the hassle of adjusting leaf springs. Anyone can easily achieve optimal tuning. The supply capacity has also significantly increased, and its durability is outstanding. It demonstrates its power in the supply, discharge, and lightweight supply of all types of powder and granular materials, including fine powders. For more details, please download the catalog or contact us.
This is the area we are focusing on the most in recent years.
This is a part feeder for eye dropper caps that are cut at an angle.
![Film feeder "GFF series" [low cutting noise and vibration, compact size]](https://image.mono.ipros.com/public/product/image/ab2/414634002/IPROS7442632648831906083.jpg?w=280&h=280)
A film feeder that achieves significant cost reduction by using roll film, which is cheaper than cut film!
This is a film feeder that allows the next film to come out immediately just by pulling the film. There are three types available, each corresponding to roll films with widths of 50–180mm, up to 250mm, and up to 380mm. It is compact and lightweight, producing minimal cutting noise and vibration, thus saving space. 【Features】 - Minimal noise and vibration during cutting, and its compact size means it doesn't take up installation space. - The next film comes out immediately just by pulling the film, making it usable even for inexperienced users. - The cutter unit can be attached and detached without tools. - It uses low-cost cutter blades, making replacements easy. - Using inexpensive roll films helps reduce costs. - There is no need to stock a large variety of film sizes. - Since cutting is done with a cutter, there is no smoke or odor from methods like heat wire. *For more details, please request materials or view the PDF data available for download.
From nano flow to high flow range, it features low pulsation unique to syringe pumps.
Amid many requests for a low-cost pump that can reliably deliver small flow rates, we have eliminated unnecessary features and thoroughly simplified the design.
Equipped with a 500μl stainless steel pump head! A micro feeder capable of handling high pressure.
The "L.TEX8350 model" is a micro feeder (micro dosing injection device) equipped with a stainless steel pump head with a capacity of 500μl, designed to meet the demand for a gas-tight syringe that can withstand higher pressure than the 8301 model. In response to the need for an inexpensive pump that can reliably deliver small flow rates, we have eliminated all unnecessary features to achieve thorough simplification. While it does not include functions such as pressure display or time programming, it is a model specialized for delivering a fixed amount with flow accuracy and delivery stability comparable to high-end models. 【Features】 ○ Syringe capacity: 500μl ○ Capable of handling high pressures up to a maximum operating pressure of 20MPa while maintaining flow accuracy For more details, please contact us or download the catalog.
General-purpose parts feeder with parts feeder + vision system + robot.
A new parts feeder with a feeder + vision system. Eliminates feeder jams and significantly reduces downtime. ◉ Traditionally, one parts feeder was required for each type of part, but with the "vision feeder," multiple parts can be mixed with just one unit. ◉ We have independently developed a robot motion program linked to a work identification vision system. ◉ By incorporating image processing signals from the vision system and utilizing arc conveyor tracking technology, we send motion commands to the robot, achieving stable picking of workpieces. As a result, a single parts feeder can handle a wide variety of workpieces. A feeder that does not jam. ★ For more details, please refer to the catalog or the product list on our website. ★ We also offer trial support at our factory. Please feel free to contact us.
Universal parts feeder with parts feeder, vision system, and robot.
A new parts feeder using a feeder + vision system. Eliminates feeder jams and significantly reduces downtime. ◉ Continuous stable feeding with automatic rejection of defects eliminates downtime caused by misfeeding. ◉ Traditionally, one parts feeder was required for each type of part, but the 'Vision Feeder' can handle multiple parts with just one unit. By incorporating image processing signals from the vision system and utilizing arc conveyor tracking technology, it sends operational commands to the robot, achieving stable picking of workpieces. As a result, it is now possible to supply a diverse range of workpieces with a single parts feeder. A feeder that does not jam. ★ For more details, please refer to the catalog or product list on our website. ★ We also offer trials at our factory. Please feel free to contact us.
General-purpose parts feeder with parts feeder, vision system, and robot.
A new parts feeder using a feeder + vision system. Eliminates feeder jams and significantly reduces downtime. ◉ Traditionally, one parts feeder was required for each type of part, but with the "Vision Feeder," multiple parts can be mixed with just one unit. ◉ A versatile feeder that can accommodate various workpieces. Significantly reduces setup time! ◉ Independently developed robot motion programs linked to the workpiece identification vision system. ◉ By incorporating image processing signals from the vision system and utilizing arc conveyor tracking technology, commands are sent to the robot, achieving stable picking of workpieces. This allows for the supply of a wide variety of workpieces with a single parts feeder. A feeder that does not jam. ★ For more details, please check the catalog or product list on our website. ★ Trials are also available at our factory. Please feel free to contact us.
Balancing safety and workability! Simplifying the task of separating troublesome tangled springs!
The "Spring Unwinding Machine" is a manual device designed to simplify the task of separating tangled springs. The assembly process of springs begins with untangling them, which requires patience depending on the characteristics of the springs. Our company has a proven track record in manufacturing parts feeders for coil springs, so we had already established the technology for separating and supplying springs. This development was initiated in response to a user's request: "Can we create a device for manually unwinding springs using the application of a parts feeder for springs?" We are conducting free tests. Please feel free to contact us for more details. 【Features】 ■ Safety considerations: Springs do not jump out from the feed opening. ■ Efficiency considerations: Equipped with a stock space to limit the amount of springs to be fed. ■ Adaptability for operators and workpieces: - Adjusts rotation speed to accommodate the processing capacity of the operator and various types of springs. *For more details, please refer to the PDF document or feel free to contact us.
Introducing ideas and wear prevention measures for heavy metal parts, as well as methods to improve durability!
At Daizen, it is possible to align and separate heavy metal parts for supply. When it comes to parts feeders for metal components used in press-formed products, one might imagine them to be thin and light, but there are also heavier workpieces. To improve work efficiency, a combination of hopper, bowl feeder, and inclined chute is used, with a larger hopper installed to reduce the frequency of loading. With the hopper in place, operators can focus on other tasks without being distracted by the remaining workpieces in the parts feeder. **Countermeasures for Wear Issues** - If the budget allows, it is recommended to harden the SUS parts that come into contact with the workpieces through nitriding treatment. - The SUS will have a dark surface due to nitriding treatment, but its hardness will increase, enhancing wear resistance. - There is the advantage of longer maintenance intervals. *For more details, please refer to the related links or feel free to contact us.*
If sorting cannot be done with just the attachment, we use sensors and image processing for sorting!
The demand for electronic component parts feeders has increased due to the widespread use of electronic devices such as computers, game consoles, and mobile phones. Daisen's electronic component parts feeders use sensors and image processing for sorting when it is not possible to sort using only attachments. They are also well-received for small resin connectors that are prone to static electricity. 【Features】 ■ With the advancement of mobile phones and computers, FPC connectors and BtoB connectors are becoming increasingly compact. ■ The shapes are also diversifying, leading to various sorting methods. ■ There are connectors that cannot be sorted using attachments alone. ■ Sorting is performed using sensors and cameras for image processing. *For more details, please refer to the related links or feel free to contact us.
Sometimes, by delving into the customer's product design and making suggestions, we have achieved more efficient automation.
We will fully utilize "skilled techniques," "accumulated know-how," as well as "insights" and "intuitions" derived from numerous experiences to derive optimal automation.
Simple & Flexible Airless System
We also offer a lineup featuring a one-touch mechanism and sanitary mechanism that pursue the utmost simplicity in installation and disassembly.
Cleaning inside the trough is easy with a Heller connection.
It can accommodate all types of powders from fine powder to granules, and the supply amount is variable with standard inverter equipment.
