We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for feeder.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

feeder×ダイマック - List of Manufacturers, Suppliers, Companies and Products

feeder Product List

1～7 item / All 7 items

Displayed results
Airless High-Speed NC Roll Feeder "H Series"

Airless High-Speed NC Roll Feeder "H Series"

Numerical control of pressure is possible! A roll feeder that achieves stable release timing.

The "H Series" is a high-end roll feeder with a press-following rotation speed of 1000 spm. It employs an inverter-driven electromagnet for the material release mechanism, eliminating the need for air supply. This not only ensures stable release timing but also allows for numerical control of the material pressing force. The new controller automatically adjusts the acceleration based on the specified feed length and press rotation speed. Additionally, the optional unit MP6 enables multi-layer operation, and a level meter to monitor the load of the feed motor is now standard equipment. You can choose from three models according to the material width and thickness. 【Features】 ■ The material release mechanism uses an inverter-driven electromagnet, eliminating the need for air supply ■ Stable release timing is achieved ■ Numerical control of the material pressing force is possible ■ Acceleration is automatically adjusted based on the specified feed length and press rotation speed ■ Multi-layer operation is possible with the optional unit MP6 ■ A level meter to monitor the load of the feed motor is also standard equipment *For more details, please refer to the catalog or feel free to contact us.

  • Other assembly machines
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC Roll Feeder "J Series"

NC Roll Feeder "J Series"

NC roll feeder suitable for non-metallic materials and thin sheet metal materials.

The "J Series" is an NC roll feeder equipped with a high-speed response air diaphragm for the material release mechanism. The maximum follow speed is 300 spm, and it can accommodate material thicknesses of up to 2.3 mm. You can choose from three models based on material width and thickness. Additionally, the standard equipment includes a specification for feeding length that was previously an option in conventional models, providing performance equivalent to that of high acceleration specifications. 【Features】 ■ Equipped with a high-speed response air diaphragm for the material release mechanism ■ Maximum follow speed of 300 spm ■ Supports material thicknesses of up to 2.3 mm ■ Standard equipped with a level meter that monitors the load of the feeding motor ■ Performance equivalent to high acceleration specifications *For more details, please refer to the catalog or feel free to contact us.

  • Other industrial robots

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-speed NC roll feeder "MS-C Series"

High-speed NC roll feeder "MS-C Series"

Optimal for press speeds exceeding 200 spm! Introducing a high-speed roll feeder.

The "MS-C Series" is a high-speed roll feeder equipped with a mechanism that releases the rollers using the ram (slide) of the press machine. It is recommended for press speeds exceeding 200 spm, which are difficult to achieve with an air cylinder release mechanism. Installation requires two press synchronization signals and air piping. Due to the mechanical release mechanism, there are constraints on the ram's movement (processing stroke), and for a material thickness of 1mm, the maximum distance from the release start position to the bottom dead center is 20mm. *For even faster applications, please consider the H Series. By using a dedicated encoder, it can accommodate speeds up to 1000 spm, and the roller pressing force can also be electronically controlled. [Features] ■ Equipped with a mechanism that releases the rollers using the ram (slide) of the press machine ■ Usable at speeds that are difficult to achieve with an air cylinder release mechanism ■ Maximum follow-up speed of 700 spm For more details, please refer to the catalog or feel free to contact us.

  • Other assembly machines
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC Roll Feeder "R Series"

NC Roll Feeder "R Series"

Standard equipped with a 10 times longer feed length! A roll feeder equipped with performance equivalent to high acceleration specifications.

The "R Series" is a standard model roll feeder equipped with a release mechanism using air cylinders. It has a maximum follow speed of 200 spm and can accommodate material thicknesses of up to 3.2 mm. The new controller automatically adjusts the acceleration based on the specified feed length and press rotation speed. It also comes standard with a level meter that monitors the load on the feed motor, and it is equipped with a standard feed length specification of 10 times, providing performance equivalent to high acceleration specifications. You can choose from four models based on material width and thickness. *For higher-speed applications, we recommend the H Series. For handling short materials, please consider the T Series. 【Features】 ■ Capable of handling a maximum material width of 500 mm and a thickness of 3.2 mm ■ Automatically adjusts acceleration based on specified feed length and press rotation speed ■ Standard equipped with a level meter that monitors the load on the feed motor ■ Standard equipped with a feed length specification of 10 times, providing performance equivalent to high acceleration specifications For more details, please refer to the catalog or feel free to contact us.

  • Other processing machines
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC Grip Feeder "G11"

NC Grip Feeder "G11"

New control equipped! A one-sided feed type grip feeder that can accommodate a feed length of up to 110mm.

The "G11" is a grip feeder equipped with an electromagnetic release mechanism that does not require air. It can follow a maximum material width of 120mm and a maximum press rotation speed of up to 600 spm. It features a new control system that allows for different accelerations during the grip's reciprocation. When a large feeding angle can be secured, it operates under conditions that are less likely to cause material slip compared to conventional models (GL110) (patent pending). The G series also includes the "TG4," a dual-side feeding type that can follow a press rotation speed of 1000 spm. 【Features】 ■ No air supply required ■ Maximum material width of 120mm, following a maximum press rotation speed of up to 600 spm ■ New control system with different accelerations for the grip's reciprocation ■ Operates under conditions that are less likely to cause material slip *For more details, please refer to the catalog or feel free to contact us.

  • Other assembly machines
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC Grip Feeder "TG4"

NC Grip Feeder "TG4"

Introducing a grip feeder with a dual-side feeding type and a press-following rotation speed of 1000 spm.

The "TG4" is a dual-side feeding type grip feeder that follows a press rotation speed of 1000 spm. It transports materials using two movable grips. While one grip is performing the feeding action, the other grip can perform the return action, allowing for high-speed operation. The maximum material width is 120 mm, and the maximum feeding length is up to 40 mm. In the G series, we also offer the single-side feeding type "G11," which can accommodate feeding lengths of up to 110 mm. 【Features】 ■ No air supply required ■ High-speed operation possible ■ Follows a press rotation speed of 1000 spm ■ Maximum material width is 120 mm, maximum feeding length is 40 mm *For more details, please refer to the catalog or feel free to contact us.

  • Other assembly machines
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC Twin Roll Feeder "T Series"

NC Twin Roll Feeder "T Series"

Perfect for short-length materials! The adoption of a C-type frame allows for material insertion from the front!

The "T Series" is a twin roll feeder model that is ideal for short material applications, allowing material insertion from the front due to the adoption of a C-type frame. It comes standard with a sliding plate, enabling manual adjustments both inside and outside the bolster. Additionally, it features a space-saving design that integrates the machine body and control equipment. The maximum follow speed is 200 spm, and it can accommodate material thicknesses of up to 3.2 mm. You can choose from two models based on the material width. The new controller automatically adjusts the acceleration based on the specified feed length and press rotation speed. A level meter that monitors the load on the feed motor is also standard equipment. 【Features】 ■ Ideal for short material applications ■ C-type frame allows for material input from the front of the machine ■ Standard sliding plate equipped, with manual adjustment possible inside and outside the bolster ■ Space-saving design that integrates the machine body and control equipment *For more details, please refer to the catalog or feel free to contact us.

  • Other assembly machines
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to feeder

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.