gasket Product List and Ranking from 142 Manufacturers, Suppliers and Companies

Daiko Teflon Cushion Gasket 'D7000'

Utilizable for a wide range of chemical-resistant fluids with Teflon's stable corrosion resistance! Electrical insulating gasket! A gasket with excellent elasticity and flexibility!

The Daiko Teflon Cushion Gasket 'D7000' features a Teflon outer layer and uses a joint sheet and heat-resistant milboard as the core material, providing excellent elasticity and flexibility. Thanks to the stable corrosion resistance of Teflon (fluororesin), it can be used with a wide range of corrosive fluids such as acids, alkalis, and organic solvents. Additionally, it has excellent electrical insulation properties and can be used as an insulating gasket for anti-corrosion piping. 【Features】 ■ Excellent chemical resistance ■ Usable over a wide temperature range from low to high temperatures ■ Provides cushioning and high sealing performance compared to pure Teflon ■ Improved creep reduction and stress relaxation at high temperatures compared to pure Teflon, ensuring stable sealing performance *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイコー本社
Price：Other

Piping Materials
Other machine elements
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SGM Soft Teflon Type Gasket

Soft Teflon-based gasket with chemical resistance, electrical insulation properties, and a combination of strength and flexibility.

The "SGM Soft Teflon Gasket" is a revolutionary non-asbestos joint sheet gasket made of 100% PTFE, featuring excellent heat resistance and chemical resistance, as well as a combination of strength and flexibility. It possesses the required characteristics for gaskets in a well-balanced manner at a high level, allowing for versatile use without the need to differentiate gaskets for each process. 【Features】 ■ Excellent adaptability, easily sealing even on slightly uneven surfaces ■ Strong against stress fluctuations, providing stable sealing performance over a long period ■ Has the highest level of strength among non-asbestos joint sheets ■ Minimal creep relaxation, allowing for stable use over a long period even at the upper limit of the usable temperature *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイコー本社
Price：Other

Piping Materials
Other machine elements
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko's "Glass Cloth & Biodegradable Ceramic Cloth" RCF compatible

This is a laminated product made by applying rubber material to smoke-preventing treated ceramic cloth or glass cloth. It is for exhaust gas, hot air, and equipment manholes!

Daiko's "Glass Cloth & Biodegradable Ceramic Cloth RCF Compatible" This is a laminated product made by applying rubber material to ceramic cloth and glass cloth that have been treated to prevent smoke. It is used for equipment such as frame packings, manhole gaskets, gasket tapes, and ducts for manholes, hot air, and exhaust gases. There are also types treated with graphite or Teflon on the surface to improve peelability during maintenance and replacement. 【D5800RCF (Biodegradable Ceramic Cloth Gasket)】 With the enforcement of regulations on Refractory Ceramic Fibers (RCF), there are now restrictions on the use of ceramic cloth. Unlike the complete ban on traditional asbestos, these regulations are protective measures from the Ministry of Labor. Our company has revised the conventional ceramic cloth to a biodegradable ceramic cloth compatible with RCF. 【D5400 Glass Cloth Gasket】 This gasket is made by applying natural rubber to glass cloth and shaping it into a specified form. *For more details, please feel free to contact us.

Company：ダイコー本社
Price：Other

Piping Materials
Other machine elements
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Prevention of selection errors for non-asbestos joint sheet gaskets for steam piping.

A wide variety of non-asbestos joint sheets with excellent heat resistance for steam piping are available! In steam lines, proper selection is necessary due to thermal cycle loads.

At Daiko Co., Ltd., we handle various types of "Non-Asbestos Joint Sheets for Steam Piping." The Nichias product "T1120 Clean Seal Top" is a black sheet gasket that contains no asbestos and is primarily made of expanded graphite reinforced with aramid fibers. In addition, we offer products such as "T9007-LC Naflon PTFE Low-Creep Gasket," which enhances wear resistance, creep resistance, thermal conductivity, and thermal dimensional stability, as well as "T1133 Clean Silk." 【Features】 <T1120 Clean Seal Top> ■ Usable for saturated steam at 2MPa ■ Sealing performance and chemical resistance comparable to asbestos joint sheets ■ Maximum outer diameter of φ2520, compatible with special shapes ■ Resistant to scratches and highly flexible *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイコー本社
Price：Other

Piping Materials
Other machine elements
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 2

I will answer your questions about the causes of leaks that occur during airtightness testing!

Daiko Corporation will answer your questions regarding gaskets. "What could be the cause of a leak during a pressure test using a joint sheet?" → (1) The shape is F.F (full face). (2) Stress relaxation (compression of the gasket) has occurred. (1) F.F. gaskets require a greater tightening force compared to F.R. (ring type) gaskets because they have a larger contact area with the flange. A leak may have occurred due to insufficient tightening surface pressure, so we recommend changing the shape to F.R. (2) There is a possibility that the tightening force has decreased due to stress relaxation (compression of the gasket). Please retighten with the initial tightening force. *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイコー本社
Price：Other

Piping Materials
Other machine elements
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 4

I will answer your questions about what to do if Teflon is hard and won't stop!

Daiko Co., Ltd. will answer your questions regarding gaskets and packing. "What should I use if Teflon is too hard and won't stop?" → We recommend Teflon cushion or soft Teflon. The core joint sheet is soft, making it easy to conform to flanges, which improves sealing performance. Soft Teflon is pure Teflon, so it can be used in processes that are sensitive to impurities. When you actually use it, we will help you select the appropriate gasket, so please feel free to consult us. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ダイコー本社
Price：Other

Piping Materials
Other machine elements
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High temperature and high pressure gasket packing 'D1000(GR)'

Due to its heat resistance of 450°C and higher usable temperature compared to conventional products, leaks are less likely to occur! Since it is our own product, we can ship it on the same day at the earliest!

The "D1000(GR)" is a gasket packing that can be used on steam lines in factories and flanges of boiler equipment. Unlike conventional products that can withstand temperatures up to 350°C, this product has a higher heat resistance of 450°C, which reduces the likelihood of leaks. Additionally, since it is manufactured in-house, standard size products can be shipped as quickly as the same day, and custom products can be shipped in as little as three days. 【Features】 ■ Usable at high temperatures Unlike conventional products that can withstand temperatures up to 350°C, this product has a higher heat resistance of 450°C, making it less likely to leak. ■ Realization of short delivery times Products in JIS and JPI standard sizes are in stock from 15A to 300A, allowing for same-day shipping. Furthermore, due to in-house manufacturing, custom-sized products can also be shipped in as little as three days.

Company：ダイコー本社
Price：Other

Piping Materials
Other machine elements
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Factory - Information on Factory Tours!!

We are conducting tours of the Daiko Tokyo factory! We process packing, gaskets, and industrial products using one of Japan's largest water jets!

We are processing materials using various machines, including one of the largest water jets in Japan (processing range 4000W x 5800L). We would like you to visit our factory to see how packing and gaskets are made, the scale of our factory, and what materials can be processed. ★ We are also conducting test processing, so please feel free to contact us. We hope to provide information that can be of help to our customers.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japan's largest water jet (water pressure cutting machine)

One of Japan's largest water jets! We can process a variety of products such as gaskets, packing (joint sheets, rubber, sponge, resin), and more!

"Features of Water Jet" A water jet is a water pressure cutting machine that uses high-pressure water as the cutting source. It can process various industrial products such as gaskets and packing (non-asbestos joint sheets, rubber, sponge, and resin). 1. No thermal effects... Since tools like blades and drills do not touch the material, there is no heat generation. 2. Processing range... The processing range is 4000W x 5800L, one of the largest in the country. 3. No molds required... Unlike press processing, which requires molds and dies, water jet processing does not need molds as it uses high-pressure water. 4. Small lot sizes... Since molds are not required, small lot sizes can be handled without incurring high costs. "Water jet processing is recommended for the following people" 1. Those who cannot find processing options for large-diameter products. 2. Those who want to test process using new materials. 3. Those who are troubled by changes or discoloration due to heat generation during processing. We hope to provide information that can be of help to our customers.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conducting test processing! One of the largest water jets in Japan!

At Daiko, we conduct test processing! Prototyping is possible from just one piece! If you have any issues with processing, please feel free to contact us!

At Daiko, we conduct test processing using one of Japan's largest water jets (processing range 4000W x 5800L). Various industrial products such as gaskets and packing (non-asbestos joint sheets, rubber, sponge, and resin) can be processed. "Features of Water Jet" 1. No thermal impact... Since tools like blades and drills do not touch the material, there is no heat generation. 2. Processing range... The processing range of 4000W x 5800L is one of the largest in the country. 3. No molds required... Unlike press processing, which requires molds and dies, water jet processing uses high-pressure water, so molds are not necessary. 4. Small lots... Since molds are not required, we can accommodate small lots without incurring high costs. "Water Jet Processing is Recommended for Those Who" 1. Cannot find processing services for large-diameter materials. 2. Want to test process using new materials. 3. Are troubled by changes or discoloration due to heat generation during processing. We hope to provide information that can be of help to our customers.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Fluid Compatibility Table (Nippon Yakin: Vulcan Comparison Table)

Gasket Fluid Compatibility Table (Nippon Yakin: Vulcan Comparison Table) is just a guideline; it is an example of systematic subdivision. Please use it for selection purposes.

Nichias: This is a comparison table for fluid compatibility of Vulcargas gaskets. Asbestos joint sheets have versatile properties that allow them to cover a wide range of practical applications due to their excellent heat resistance and pressure resistance. However, as the transition away from asbestos progresses, a certain degree of categorization for usage applications will be necessary. The alternative flow shown below is merely a guideline, but it serves as an example of systematic categorization. Please use it for selection purposes.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Biodegradable ceramic angle joint gasket and packing compatible with RCF.

This is a gasket made with ceramic biodegradable fibers that complies with RCF regulations! (Exhaust gas stack, boiler system gaskets, packing)

Refractory Ceramic Fiber (RCF regulations) has been implemented, and regulations regarding the use of ceramic fibers have been established. Our company has transitioned from traditional ceramic fibers to biodegradable ceramic fibers that are designed to be soluble in the body if ingested, in order to comply with these regulations. 【Product Description】 This is a packing material made by weaving biodegradable ceramic fibers into a corner shape. It is used in exhaust ducts, boilers, combustion equipment, pumps, and more. - This packing is woven with biodegradable fibers and organic fibers, complying with RCF regulations. - It does not have airtightness, so some leakage may occur. Please use it in areas where leakage is acceptable. - We also offer cut sales starting from a standard length of 30 meters.

Company：ダイコー本社
Price：Other

Piping Materials
Pipe Fittings
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 5

What is the difference between Teflon cushions with felt and those without felt?

Daiko Co., Ltd. will answer your questions regarding gaskets and packing. Products like T9010-A6 and V7030(S) allow for sealing at low surface pressure by sandwiching a soft felt material in the joint sheet to improve sealing performance. However, when used in areas exposed to rain or condensation, the felt can absorb moisture, making it unsuitable. In such cases, it is better to use joint sheets like T9010-A5 or V7030(N) along with products that only have a Teflon coating.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 7

Have regulations been established for ceramic fiber-related products?

Daiko Corporation will answer your questions regarding gaskets and packing. 〇 About RCF (Refractory Ceramic Fiber) Regulations In November 2015, the Specific Chemical Substance Hazard Prevention Regulations were amended and enforced, leading to regulations concerning the handling of RCF. The purpose is to strengthen measures to prevent health hazards for workers related to refractory ceramic fibers. The "Ordinance to Partially Amend the Enforcement Order of the Labor Safety and Health Act" (Ordinance No. 294 of 2015) was promulgated on August 12, 2015, and the "Ministry of Health, Labor and Welfare Ordinance to Partially Amend the Labor Safety and Health Regulations" (Ordinance No. 141 of 2015) was promulgated on September 17, 2015. 〇 Transition to Biodegradable Ceramic Fibers In response to the regulations, we have changed the conventional ceramic fibers to biodegradable ceramic fibers developed to have solubility even when they enter the body. In terms of performance, the only difference is between fibers that dissolve in biological water (RCF-compliant products) and those that do not dissolve (RFC non-compliant products). We guarantee that there are no products that are inferior in performance compared to existing products.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 9: Gasket Surface Leakage Edition!

What causes leaks when using gaskets? - Surface leak edition -

There are various factors that can cause leaks when using gaskets, but this time I will explain about interface leaks. ◆ What is an interface leak? It is a phenomenon where internal fluid leaks through the interface between the sealing material and the opposing surface (such as a flange or shaft). ◆ Countermeasures Fill the minute gaps between the sealing material and the opposing surface with clamping force. ◆ Requirements for sealing materials - Compatibility - Resilience (to respond to pressure drop due to vibrations, thermal loads, etc. during operation, and to prevent the occurrence of minute gaps)

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 10: Gasket Penetration Leakage Edition

What causes leaks when using gaskets? ~Permeation leak edition~

There are various factors that can cause leaks when using gaskets, but this time I will explain about permeation leaks. ◆ What is permeation leak? 　〇 A phenomenon where the sealing material is permeated, causing the internal fluid to leak. ◆ Countermeasures 　〇 Increase the density of the sealing material by compressing it with tightening force to fill the tiny gaps inside the sealing material. ◆ Requirements for sealing materials 　　〇 Density 　　〇 Resistance to permeation 　　〇 Applying rubber or resin-based paste materials to the inner diameter end face is also effective.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 4 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We use various processing machines, including one of Japan's largest water jet cutters (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Example】 We processed a cross-shaped packing measuring 18WX18L from 50° 1t silicone rubber. The water jet is a large machine with dimensions of W4000 x L5000mm, but we are also skilled in processing small diameters.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 5 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Examples】 We manufactured Teflon (PTFE) ring shapes and gaskets for heat exchangers. The size is over 1000mm in diameter, but with a water jet, we can achieve tolerances of approximately ±0.2 to 0.3. For heat exchangers, we can also digitize intricate details such as R processing on branch parts using CAD, allowing us to produce gaskets that fit the flange size.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 6 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jet cutters and plotters, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Example】 We performed width cutting on 3mm neoprene rubber (50WX10M) using a slitter. This machine specializes in processing rubber strips. The width setting can be easily changed by adjusting the position of the blade. Depending on the material, processing of over 10M is also possible.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 7 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jet cutters and plotter and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Example】〇 T9007LC 3mm PTFE with filler was processed using a plotter. By using a special ultra-hard blade for processing, the cross-section of the gasket is finished beautifully. We can accommodate processing ranges up to 1500W, allowing for large-diameter processing to be completed in a short delivery time. This is a high-performance gasket that is resistant to heat up to 200°C and has low creep.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Case No. 8 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jet cutters (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Example】 We manufactured an O-ring with a wire diameter of Φ24 x IDφ1646 by adhesive processing from round cord. The adhesive surface was cut at an angle to increase the bonding area, allowing for a stronger adhesion. Although the wire diameter was thick and the size was large, it was finished to the specified dimensions. O-rings are typically produced through heat vulcanization compression molding, but we may also process them by adhesive methods from round cord based on customer requests.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 9 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We use various processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Examples】 We cut a neoprene rubber sheet to the required length using a water jet and processed it into a cylindrical shape with adhesive. The smaller the diameter, the more material rebound occurs, increasing the difficulty of production. When processing as a single piece, it requires processing from a rubber sheet with a thickness of 60mm, and the machines that can handle this are limited. If adhesive processing is possible, we can offer it at a low cost.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 10 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize a variety of processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Example】 We processed a neoprene sponge sheet into four parts using a water jet, bonded the corner sections, and shaped it into a frame. This method results in less material waste compared to processing as a single piece, allowing for cost reduction. We process using CAD data, enabling precise machining of bolt positions and other details.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 13: What is compression failure of a seat?

What is the compressive failure of a joint sheet?

There are several issues with joint sheets, but I will explain the most common case, which is compression failure. ◆Details of the problem 　〇Cracks occurred around the gasket, making it extremely thin. ◆Possible causes 　〇Compression failure due to excessive tightening. 　〇Excessive load applied to a part of the gasket due to lack of parallelism of the flange or deformation. 　〇Localized slippage of the joint sheet due to uneven application of paste. ◆Countermeasures 　〇Tighten without exceeding the allowable tightening surface pressure of the gasket. 　〇Problems caused by improper construction such as single-sided tightening, insufficient tightening, or excessive tightening. 　〇Correct the parallelism and deformation of the flange. 　〇When applying paste, apply it thinly and evenly.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 15 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. 【Processing Example】 We processed urethane rubber with a thickness of 10mm. The outer circumference and long holes were processed using a water jet. The chamfering was done with a chamfering machine. By changing the pit, we can also perform chamfering other than the 45° angle. Urethane rubber falls into the category of hard rubber, but it can be processed with a water jet.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 20 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We use various processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. We processed a 1-ton three-sheet. While equivalent processing is possible with water jet cutting, the plotter can process while vacuuming (keeping the material flat). Unlike water jets, it does not get wet. For these two reasons, processing with a plotter is suitable.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 21 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. We performed multiple processes from the material V6500 3t 2540Wx3810L. We processed large-diameter gaskets, including a full gasket with a diameter of Φ1550 and a frame packing of 800Wx1000L. This processing takes advantage of the water jet's processing range.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 24 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jets (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. We processed 33 pieces of T1120 3t 10K-750A. We used 5 sheets of material measuring 2540W x 3810L and efficiently combined them with other products for processing. Since the processing range is 4000W x 5800L, we can also arrange 2 sheets of material measuring 2540W x 3810L. We can handle large-diameter processing with short lead times, so please feel free to contact us.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 25 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jet cutting machines and plotters and presses, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. We processed polyethylene foam, which is said to be used as cushioning material. Although it has a thickness of 60T, we were able to process it using a water jet. We processed four sheets of material measuring 1000W x 2000L, which fit efficiently on the processing table, resulting in minimal material loss and allowing for quick processing.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daiko Tokyo Branch Processing Example No. 26 Gaskets and Industrial Products!

Introducing examples of processing gaskets, packing, and industrial products! We process them using various machines, including water jets (high-pressure processing machines)!

Our company has been processing and selling gaskets, packing, and industrial products for over 45 years. We utilize various processing machines, including one of Japan's largest water jet cutters (high-pressure cutting machines), plotters, and press processing, to propose products to our customers. Please feel free to contact us for any inquiries regarding processing. We have processed a glass cloth with specifications of t1.6, φ910xφ802, P845. To improve the workability of the glass fiber, we have laminated it with a special rubber. We can also accommodate various spun products, including ceramic cloth, tape processing, and graphite-treated items.

Company：ダイコー本社
Price：Other

Piping Materials
gasket

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

gasket Product List and Ranking from 142 Manufacturers, Suppliers and Companies | IPROS GMS

gasket Manufacturer, Suppliers and Company Rankings

gasket Product ranking