We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for heater.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

heater Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Last Updated: Aggregation Period:Oct 01, 2025~Oct 28, 2025
This ranking is based on the number of page views on our site.

heater Manufacturer, Suppliers and Company Rankings

Last Updated: Aggregation Period:Oct 01, 2025~Oct 28, 2025
This ranking is based on the number of page views on our site.

  1. プロヒート ヒーター事業部 Aichi//Industrial Machinery
  2. 日本ヒーター Tokyo//Industrial Electrical Equipment
  3. 西都電機 Osaka//equipment
  4. 4 Sakae Corporation Onishi Factory Gunma//Machine elements and parts
  5. 5 新日電熱工業 Osaka//Machine elements and parts

heater Product ranking

Last Updated: Aggregation Period:Oct 01, 2025~Oct 28, 2025
This ranking is based on the number of page views on our site.

  1. For autonomous driving sensors! Film heaters to prevent malfunctions caused by snow accumulation.
  2. From room temperature to 1200°C in about 150 seconds! High-speed high-temperature cartridge heater. 三洋熱工業
  3. High-temperature cartridge heater Sakae Corporation Onishi Factory
  4. 4 Near-infrared paint dryer Promo Series [Immediate heating of the irradiation section is possible] トーコー
  5. 5 Cartridge Heater "PCH" プロヒート ヒーター事業部

heater Product List

346~360 item / All 2524 items

Displayed results

Reduce power consumption! Self-regulating heating cable

Variable heat output to optimize power consumption! It can also be applied to complex shapes.

The HWAT hot water temperature maintenance system is an environmentally friendly system that can supply hot water without wasting water or energy. This system uses "self-regulating heating cables," which increase heater output at low temperatures, decrease heater output at moderate temperatures, and further reduce heater output to the minimum at high temperatures. The self-regulating feature helps avoid overheating and keeps power consumption low. 【Features】 ■ Self-regulating ■ Reduced power consumption ■ Low temperature = high heat output ■ Moderate temperature = low heat output ■ High temperature = minimum heat output *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Comparison of the configuration between the conventional hot water circulation system and the HWAT hot water temperature maintenance system.

Flexible and space-saving! It is possible to reduce energy consumption by approximately 50%!

The "HWAT Hot Water Temperature Retention System" is an environmentally friendly hot water temperature retention system that takes hygiene and comfort into full consideration. Conventional hot water circulation systems consist of hot water piping, insulation materials, hot water circulation pumps, and reheating units (in the case of eco-cute). However, this system does not have a return pipe, which relaxes the space requirements for the piping. Additionally, this product can reduce the energy consumed for hot water by approximately 50% compared to the energy required for a circulation system, significantly contributing to CO2 reduction. (Note: The amount of energy reduction varies by system.) 【Features】 ■ No return piping ■ Relaxed space requirements for piping ■ No installation work related to return piping is necessary ■ Energy consumption reduction ■ Significant contribution to CO2 reduction *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.jpg
  • image_01.jpg
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Anyone can easily design! "Auto Trace Design Method"

It is possible to calculate the heat dissipation without complex calculations!

"Auto Trace" can be easily designed by anyone if the heat dissipation amount can be calculated, thanks to its parallel circuit type and self-regulating characteristics. For this reason, heat dissipation tables for piping, valves, and tanks have been prepared, allowing for the calculation of heat dissipation without complex calculations. Additionally, the electrical output of Auto Trace is designed with a safety factor in mind, so it can be used as is. *For more details, please refer to the PDF materials or feel free to contact us.*

  • image.png
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Freeze Prevention Heater "Self-Regulating Heater Cable BTV Series"

Suitable for process heating applications up to 65℃, freeze prevention heater.

The "Self-Regulating Heater Cable BTV Series" is a self-regulating electric heater primarily applicable for freeze prevention and process temperature maintenance up to 65°C! The heat resistance specifications of this product are 65°C for continuous operation and 85°C for intermittent operation. With the specified BTV products and the configuration of associated components, it can be used as an electric heating system in hazardous locations of Class 1 and Class 2 in Japan. 【Features】 ■ Freeze prevention ■ Process temperature maintenance up to 65°C ■ Type approval system ■ Complies with JIS testing (JISC3651) 【Product Composition】 ■ Conductor ■ Self-regulating heating element ■ Polyolefin resin insulation coating ■ Tin-plated copper braid (shield) ■ CR: Polyolefin resin outer layer coating ■ CT: Fluoropolymer outer layer coating *For more details, please refer to the PDF materials or feel free to contact us.

  • image_10.jpg
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-regulating heater cable QTVR series with a maximum insulation temperature of 110℃.

Self-regulating heater capable of maintaining a process temperature of up to 110℃.

The "Self-Regulating Heater Cable QTVR Series" is an electric heater cable for process heating that can maintain a maximum temperature of 110°C. It can also be used for freeze prevention in areas with significant heat loss. The heat resistance specification of this product is 110°C for both continuous and intermittent operation. Additionally, it can be used as an electric heating system in hazardous locations of Class 1 and Class 2 in Japan, thanks to the system configuration of specified QTVR products and their associated components, as well as in general areas exposed to acids, alkalis, and organic materials. 【Features】 ■ Effective freeze prevention in areas with significant heat loss ■ Capable of maintaining a maximum process temperature of 110°C ■ Model approval system ■ Compliant with JIS testing (JISC3651) 【Product Composition】 ■ Conductor ■ Self-regulating heating element ■ Fluoropolymer resin outer layer coating ■ Tin-plated copper braid (shield) ■ CT: Fluoropolymer resin outer layer coating *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.jpg
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Maximum 120℃ insulation - "Self-Regulating Heater Cable XTV Series"

Complies with JIS standards (JISC3651)! Capable of process insulation at up to 120℃!

The "Self-Regulating Heater Cable XTV Series" is an electric heater cable designed for process temperature maintenance, capable of maintaining temperatures up to 120°C. The heat resistance specifications of this product are 120°C for continuous operation and 215°C for intermittent operation. It can be used as an electric heating system in hazardous locations of Class 1 and Class 2 in Japan, not only in general areas exposed to acids, alkalis, and organic materials but also in specific XTV products and their system configurations. 【Features】 ■ Capable of maintaining process temperatures up to 120°C ■ Type approval system ■ Complies with JIS testing (JISC3651) 【Product Composition】 ■ Conductor ■ Fluoropolymer resin insulated spacer ■ Self-regulating heating element ■ Fluoropolymer resin insulated coating ■ Tin-plated copper braid (shield) ■ CT: Fluoropolymer resin outer layer coating *For more details, please refer to the PDF document or feel free to contact us.

  • image_05.jpg
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Raychem self-regulating heater

Supports energy saving and cost reduction, compatible with various heaters!

Our company is a licensed sales and engineering agent for Raychem's self-regulating heaters (auto-trace heaters), supporting energy-saving, cost-reduction, and CO2 reduction for systems. The Raychem brand is recognized for its technical leadership as the inventor of self-regulating heating cables. Additionally, Raychem's cables adjust their output according to surrounding and process conditions, accurately delivering the right amount of heat to the necessary location at the required time, making them ideal for heat management systems. [Features] ■ Authorized primary engineering agent for Raychem, handling self-regulating heaters and more ■ Supporting energy-saving, cost-reduction, and CO2 reduction for systems *For more details, please refer to the PDF document or feel free to contact us.

  • スライド1.JPG
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-regulating heating cable that forms a circuit between parallel conductors.

A parallel heating cable with a coil-shaped alloy resistance heating element wrapped around two parallel conductors.

Our company is an authorized primary engineering distributor for Raychem. Raychem invented self-regulating heater technology over 40 years ago, bringing a significant transformation to the insulation industry at that time. Self-regulating heating cables contain heating resistors made from a polymer blended with conductive carbon, and due to the composition of this special material, an electrical circuit is formed between the parallel conductors along the entire length of the cable. Additionally, Raychem's Power Limiting (VPL) heaters are parallel heating cables that have a coiled alloy resistance heating element wrapped around two parallel conductors. The resistance of this heating element increases with temperature, creating a positive temperature coefficient (PTC) effect. VPL can be used for high output and high-temperature exposure requirements, which can reduce the number of heating cables needed for installation. *For more details, please refer to the PDF document or feel free to contact us.

  • image_07.jpg
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Significant cost reduction for SDGs & automation measures! 'Insulation Heater'

Output changes according to ambient temperature, providing uniform heating! High quality with no maintenance required for the heater! Aiming to reduce costs by 90% from approximately 10 million per month. *Examples of problem-solving are described.

Seido Electric provides safe, self-regulating heaters that have a long lifespan and can adjust their output according to ambient temperature, making them suitable for use in hazardous areas. Since the temperature is maintained at an upper limit, they do not overheat and can provide uniform heating. Being electric, there is no need for boiler operators, resulting in significant cost advantages compared to hot water and steam systems, which have recently garnered attention! **[Challenge]** A confectionery manufacturer was spending 10 million yen per month to melt chocolate and jam, which was costly and required a boiler operator. They requested a reduction in costs, including labor expenses. **[Solution]** We replaced the existing hot water and steam systems with self-regulating heaters, achieving a 90% reduction in costs. The electric heaters can operate 24 hours a day and only incur costs for the necessary energy, reducing the monthly expense from 10 million yen to about 1 million yen, roughly one-tenth of the original cost. Additionally, the elimination of the need for a boiler operator significantly lowered expenses, much to their satisfaction. *You can download the "Heater and Boiler Troubleshooting Guide" as a PDF!*

  • image_09.jpg
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Threats and Solutions for Water Leaks in Server Equipment

Introducing solutions for data centers and server rooms!

In many modern businesses, server equipment plays a central nervous system role, with thousands of optical cables and electrical wires concentrated in a narrow space. The equipment housed in racks generates a large amount of heat, necessitating heat removal to prevent equipment failure. The role of heat removal is handled by HVAC systems, where cooled water is pumped to the equipment as an important heat removal medium. However, water and electronic devices cannot coexist. To address this, TraceTech has developed a "leak detection sensor cable" that can detect water leaks and accurately pinpoint their locations. It can immediately detect any water leaks from HVAC units, cooling water piping joints, or backup drainage systems at precise locations, allowing for the appropriate floor tiles to be removed for remediation. *For more details, please refer to the PDF document or feel free to contact us.*

  • Other information systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reikem Corporation Self-Regulating Heater

Introducing an overview of self-regulating heaters that provide reliable and safe electric heating and insulation!

We handle Raychem's "Self-Regulating Heater." It allows for reliable and safe electric heating and insulation without the risk of abnormal overheating or burnout, even without using a thermostat. Additionally, due to its continuous parallel circuit structure, it can be cut to the necessary length on-site for use. 【Features (Self-Regulation)】 ■ The amount of heat generated increases or decreases with temperature changes, controlled by the heating element itself. ■ It will never operate above the self-regulating heater's heat resistance temperature, even with continuous use. ■ There is no need to install a thermostat for overheating prevention. ■ It will not create hot spots (overheated areas) even when used in a crossed configuration. ■ There is no risk of the heater burning out due to abnormal overheating. *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-regulating heating cable "BTV"

Reykem industrial application electric heating cable for freeze prevention and process insulation.

The self-regulating heating cable "BTV" is used for freeze prevention applications, as well as for process temperature maintenance applications up to 65°C. The heat resistance specifications are 65°C for continuous operation and 85°C for intermittent operation. Depending on the specific BTV products and accessory components, it can be used as an electric heating system in hazardous locations classified as Type 1 and Type 2 or Class I and Class II in Japan. 【Features】 ■ Type approval system ■ Compliant with JIS testing (JIS C 3651) *For more details, please refer to the PDF materials or feel free to contact us.

  • cable

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-regulating heating cable "QTVR"

Can also be used for freeze prevention with significant heat loss! Electric heating cable for process insulation.

The "QTVR" is a self-regulating heating cable capable of maintaining process temperatures up to 110°C. It can also be used for freeze prevention in areas with significant heat loss. In addition to general areas exposed to acids, alkalis, and organic materials, it can be used as an electric heating system in hazardous locations classified as Type 1 and Type 2 or Class I and Class II in Japan, depending on the specific QTVR products and accessory components' system configuration. 【Features】 ■ Heat resistance specification: 110°C for both continuous and intermittent operation ■ Type approval system ■ Compliant with JIS testing (JIS C 3651) *For more details, please refer to the PDF document or feel free to contact us.

  • cable

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-regulating heating cable "XTV"

Self-regulating heating cable for industrial applications by Raikem, capable of maintaining process temperatures up to 121°C.

"XTV" is an electric heating cable for process heating that can maintain a process temperature of up to 121°C. The heat resistance specifications are 121°C for continuous operation and 250°C for intermittent operation. It can be used as an electric heating system in hazardous locations of Type 1 and Type 2, or Class I and Class II in Japan, not only in general areas exposed to acids, alkalis, and organic materials but also in specific configurations of XTV products and their associated components. 【Features】 ■ Heat resistance specifications: 121°C for continuous operation, 250°C for intermittent operation ■ Type approval system ■ Compliant with JIS testing (JIS C 3651) *For more details, please refer to the PDF document or feel free to contact us.

  • cable

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-regulating heating cable "KTV"

Electric heating cable for process insulation compliant with JIS test (JIS C 3651).

The "KTV" is a self-regulating heating cable capable of maintaining a process temperature of up to 150°C. The heat resistance specifications are 150°C for continuous operation and 250°C for intermittent operation. It can be used as an electric heating system in hazardous locations of Type 1 and Type 2, or Class I and Class II in Japan, not only in general areas exposed to acids, alkalis, and organic materials but also in specific KTV products and system configurations of associated components. 【Features】 ■ Heat resistance specifications: 150°C for continuous operation, 250°C for intermittent operation ■ Type approval system ■ Complies with JIS testing (JIS C 3651) *For more details, please refer to the PDF materials or feel free to contact us.

  • cable

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration