We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for inspection.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

inspection(net) - List of Manufacturers, Suppliers, Companies and Products

Last Updated: Aggregation Period:Sep 17, 2025~Oct 14, 2025
This ranking is based on the number of page views on our site.

inspection Product List

1~15 item / All 28 items

Displayed results

Net Prowler LAN Cable Tester Measurement Device Inspection

A multifunctional device that integrates the capabilities required for network communication testing into one unit, assisting with communication cables and network diagnostics - Asia-Pacific regional general agent.

We would like to introduce a model that integrates various functions required for network communication testing into a single device. ◇ Equipped with TDR technology and featuring an easy-to-read color panel ◇ A higher model in the CP series, allowing for easier and more intuitive operation of LAN cable measurements ◇ Capable of detecting not only faults in the LAN cable itself but also performing internet line speed checks, network switch identification, Ping IP & URL, PoE specifications, VLAN, and various other measurements ◇ Able to identify IP addresses connected to the same network ◇ Comes with an export function for measurement results, allowing reports to be output in PDF or CSV format as soon as measurements are completed, reducing paperwork By utilizing a dedicated remote unit for coaxial and LAN cables, you can understand the wiring status of the cables and detect the corresponding positions of LAN ports and network switches, efficiently identifying faults such as shorts, disconnections, split pairs, crossed pairs, and reversed pairs. The Net Prowler series supports coaxial cables, enabling cable diagnostics and wiring diagrams for television and audio equipment with a single device, facilitating efficient LAN installation. ● Supports IPv4/IPv6 ● Made in the USA

  • Electrical Instruments/Electrometers
  • LAN construction and wiring work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Net Chaser LAN Cable Diagnostic Measurement Tester Inspection

"Made in the USA" With enhanced functionality, more efficient and effective! The top model that supports network communication diagnostics and speed measurement.

The NC950 model / NC950-AR model is a LAN cable checker that supports testing and speed measurement related to network circuits in one device, quickly solving the concerns and problems of those who do not want to carry multiple measuring instruments for communication work. ● Capable of handling everything from wiring status of LAN cables to connectivity tests in one device! It is equipped with all testing functions that serve as indicators of network performance, including BER/SNR/SKEW/DHCP/PingP & URL Address/Traceroute/VLAN/PoE. ● Supports all tests related to network communication information and speed measurement. ● Supports continuity verification, wiring path exploration, and cable diagnostics up to 1G. ● Adopts a color touch panel for intuitive operation, significantly improving efficiency. ● Automatically saves measurement results, generates reports automatically, and allows easy file transfer and backup using an SD memory card or USB cable. ● Enables quick understanding of the location and information of devices that build the network, such as servers and switches. ● Complies with IEEE802.3, diagnosing wiring errors of TIA568A/B cables and faults in coaxial cables. By using remote units, it allows understanding of the relative positions of each connection port.

  • Electrical Instruments/Electrometers
  • Other measurement, recording and measuring instruments
  • LAN construction and wiring work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Penetrant Testing

The operating temperature is from room temperature to 200°C! It has excellent ability to detect cracks and circular defects!

"Penetrant Testing" is a method that targets surface-opening defects that occur on material surfaces. It involves applying a penetrant liquid, which is drawn out to the surface through capillary action, and the resulting indications are perceived through visual inspection. Since liquid penetrants are used, it is possible to detect defects in the details of complex-shaped test specimens. It is highly effective in detecting cracks and circular defects in various orientations. This method can be applied to all materials except for hygroscopic materials, regardless of whether they are magnetic, non-magnetic, metallic, or non-metallic. 【Features】 - Targets surface-opening defects that occur on material surfaces - Uses liquid penetrants - Excellent ability to detect cracks and circular defects - Accommodates defects in various orientations - Operating temperature: Room temperature to 200°C *For more details, please refer to the PDF document or feel free to contact us.

  • Contract Inspection
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shape learning and measurement, inventory management assistance AI 'Oivio'

Automate the necessary counting tasks for inventory checks! Human work is only to verify the counting results.

"Oivio" is software that learns the shapes of colored objects through coloring training and automatically counts them. By training the AI with colored data of the objects to be counted, it learns the shapes and performs detection and counting automatically. 【Features】 ■Significantly improves the efficiency of counting tasks ■Can count various items (pipes, nutritional products) ■Operable even when products change ■Equipped with a history verification function *For more details, please refer to the PDF document or feel free to contact us.

  • Image analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic Count AI App "FlashCount"

Count the number of pipes instantly with your smartphone! Just take a photo of the pipe ends on-site, and the count will be displayed immediately!

"FlashCount" is a system that efficiently counts bundles of pipes and similar items using smartphones and the cloud. By analyzing captured images, it can instantly determine the quantity, significantly streamlining operations. No special photography equipment is required. If you purchase a dedicated smartphone, you can start using it the same day. 【Features】 ■ Automatic counting with AI ■ Significant efficiency improvement over manual counting ■ Photos and counting history are stored in a database ■ History can be checked at any time ■ Available for immediate use upon purchasing a dedicated smartphone *For more details, please refer to the PDF materials or feel free to contact us.

  • Image analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection of mirror and plated products (detection and classification of defects) [Free verification conducted]

Successfully detected and classified scratches and foreign objects on mirror and plated products! Achieved high detection accuracy with a special imaging technique that suppresses reflections! Introducing detection cases using NuLMiL.

We would like to introduce a detection case using the appearance inspection system "NuLMiL." It is applicable for detecting defects in mirror-finished and plated products. Using special lighting to capture images without reflections, we conducted verification with this product and successfully detected and classified defects such as scratches and foreign objects. This imaging technique is also applied to INZ-02, and semi-automation is possible for small parts. 【Challenges】 - We want to automate and reduce manpower for inspections currently done visually. - Inspection using AI is difficult for small lot, diverse manufacturing. - We want to classify defects by type, such as scratches and discoloration. - Light reflects off the product, leading to false detections. 【Verification Details】 - Captured images using special lighting. - Used this product to address defect classification. *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"NuLMiL," an appearance inspection AI that can automatically classify defects by painting and memorizing.

Automatic appearance inspection with AI × image recognition! Achieving high defect detection accuracy with a small amount of defective and good product data through hybrid learning.

Our "NuLMiL" is an appearance inspection AI solution that learns defective patterns with each application and automatically classifies defect types. The AI, trained with color-coded image data that distinguishes each defect, automatically identifies and classifies defects based on the applied colors. Through hybrid learning of good and defective products, it achieves high detection accuracy with a small amount of defective product data, detecting not only classified defect types but also unknown defects. 【Features】 ■ Automation of sensory inspection through AI creation using limit samples and dimensional information ■ Hybrid learning of good and defective products ■ High detection accuracy with a small amount of defective product data ■ Detection of unknown defects in addition to classification of defect types *For more details, please refer to the PDF document or feel free to contact us. *Free verification is also available. Please inquire for more details.

  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Visual inspection of plastic containers [Free verification conducted]

From transparent items to small ones and those with complex shapes! Here are some detection examples using NuLMiL.

We would like to introduce detection examples using the visual inspection system "NuLMiL." It can be applied to the detection of defects in plastic products. For transparent containers, by using backlighting with a light guide plate, we can clearly capture the defective parts. For small containers or those with complex shapes, we have made it possible to conduct a full inspection by rotating the container while capturing images using the IKZ-01. 【Challenges】 - We want to automate and reduce the manpower required for inspections currently done visually. - Inspection using AI is difficult for small lot, diverse production. - We want to classify defects by type, such as scratches and discoloration. - Light reflection from the product can lead to false detections. 【Verification Details】 - Capturing images with lighting tailored to the container. - Using inexpensive lighting and cameras to reduce implementation costs. - Utilizing this product to accommodate diverse production and defect classification. *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection of wall materials and boards (classified by type of defects) [Free verification conducted]

Successfully classified cracks, scratches, dirt, and polishing unevenness in wall and panel materials! Capable of handling sizes from A4 to 3m! Here are some detection examples using NuLMiL!

We would like to introduce a detection case using the appearance inspection system "NuLMiL." It can be applied to the detection of defects in wall materials and panel materials. In the verification, images captured using a line sensor camera and bar lighting were used to train and judge against calcium silicate board materials, successfully classifying cracks, scratches, dirt, and polishing unevenness. 【Challenges】 - We want to automate and reduce labor for inspections currently done visually. - AI inspection is difficult for small lot, diverse manufacturing. - We want to classify defects by type, such as scratches and discoloration. - There is variability in inspection standards among inspectors. 【Verification Details】 - Images were captured using a line sensor camera and bar lighting. - This product was used to correspond to defect classification. *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection of toothbrushes [Free verification conducted]

From transparent items to small ones and those with complex shapes! Here are some detection examples using NuLMiL.

We would like to introduce a detection case using the appearance inspection system "NuLMiL." It can be applied to the detection of defects in toothbrush products. By clearly capturing the dirty areas of the brush and the chipping of the resin parts with a microscope, we have made inspection possible. 【Challenges】 ■ We want to automate and reduce manpower for inspections currently done visually. ■ It is difficult to conduct inspections using AI for small lot, diverse production. ■ We want to classify defects by type, such as scratches and discoloration. ■ Light reflection from the product can lead to false detections. 【Verification Details】 ■ Photography with lighting tailored to the container. ■ Using inexpensive lighting and cameras to reduce implementation costs. ■ This product can accommodate diverse manufacturing and defect classification. *For more details, please feel free to contact us.

  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SentroPAT FO Process Near-Infrared Spectroscopy Analyzer

This is a probe-type near-infrared spectroscopy PAT tool. It can be used in various processes such as granulation, mixing, tableting, and coating.

This is an analytical device for inline and real-time monitoring of solid dosage form processes (mixing, granulation, drying, and tableting). It is installed at various points in the manufacturing process to analyze physical and chemical parameters. The hardware consists of a maximum of 4-channel NIR detection units and probes connected by optical fibers and cables. The software is a proven package that meets the specifications required for pharmaceutical manufacturing processes, including audit trail functionality, user management, and output of inspection results. We provide a complete PAT solution, as well as customized solutions tailored to customer requests.

  • Analytical Equipment and Devices
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnetic Particle Inspection "Non-Destructive Testing" [Safety and Security]

Peace of mind and safety! This is a development service that offers non-destructive testing using magnetic particle inspection equipment.

It is ideal for cost-effective product development in a short time since non-destructive testing can be conducted simultaneously with development. Magnetic particle testing is referred to in English as MT or MPT (Magnetic Particle Testing), and it can detect surface-opening defects (cracks) and subsurface defects by magnetizing the test specimen.

  • Flaw detection testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AI image inspection in the manufacturing industry.

By combining existing inspections with AI visual inspections, we will reduce the outflow of defective products to consumers!

AI image inspection is an appearance inspection that utilizes deep learning, building models by learning the characteristics of the inspection targets from data. It enables easier operation and higher precision inspections compared to conventional inspection machines. Additionally, by replacing existing inspections with AI appearance inspections, it reduces the human costs associated with inspections. 【Technical Details (Partial)】 ■ Fusion of AI and Robotics - Many engineers with expertise in robotics are on staff, enabling automation of inspection processes involving movement through the fusion with robotics. ■ Wide range of image recognition technologies applied - YOLO Series, Mobilenet-SSD, DETR, DeepLab, DCGAN, VAE, etc. *For more details, please download the PDF or feel free to contact us.

  • Image Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnetic particle testing

Magnetic powder adheres to the defect, causing the defect to expand! Introducing an inspection method suitable for ferromagnetic materials.

Magnetic Particle Testing is a suitable inspection method for detecting flaws near the surface of ferromagnetic materials. When a test specimen with cracks or other flaws in the surface or just below the surface is magnetized, magnetic flux leaks from the flaws, creating magnetic poles. When magnetic particles are sprinkled on the surface of the test specimen, they adhere to the flaw, enlarging it and making detection easier. 【Features】 ■ Applicable only to ferromagnetic materials ■ Effective for surface flaws ■ An effective inspection method for crack-like flaws ■ In places where outdoor or dark conditions are not possible, color magnetic particles (white, black, etc.) that do not require black light are used. *For more details, please refer to the PDF document or feel free to contact us.

  • Contract Inspection
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3D Camera Ensenso - Measurement and Inspection

Reduce time and improve productivity with fully automated inline inspection!

We would like to introduce the application of Ensenso's stereo 3D camera, the "Ensenso N35 model," as an effective inline inspection tool for the manufacturing industry. The high-precision digitization provided by this camera, along with subsequent image processing for object verification, significantly enhances the quality of products produced in later processing steps. 【Features of Ensenso N35】 ■ Well-suited for 3D detection of stationary objects ■ Operating distance up to 3,000 mm ■ Focal length of 6 to 16 mm ■ Equipped with MVTec HALCON interface and object-oriented API (C++, C#, .NET) *For more details, please refer to the PDF document or feel free to contact us.

  • 3D measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration