Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
256～270 item / All 919 items
Introduction of trim processing jigs suitable for the aerospace industry!
This product is a trimming processing jig related to aircraft. The material is aluminum, and the size is 400mm × 1200mm. 【Features】 ■ Material: Aluminum ■ Size: 400mm × 1200mm *For more details, please refer to the PDF document or feel free to contact us.
For the simplification of pressure testing!
By installing this product, you can easily conduct pressure tests that are cumbersome and difficult to verify.
![[Processing Example] SP Jig High Hardness Parts Processing](https://image.mono.ipros.com/public/product/image/8ab/2000642529/IPROS90580382735919786752.jpeg?w=280&h=280)
We can handle the production of various parts starting from just one piece! Here are examples of cases where SP jigs were processed.
At Antak Co., Ltd., we manage a wide range of processes comprehensively and promise to reduce total costs. In the processing department, we handle various parts from single items. We strive to meet our customers' processing requests and maximize cost efficiency. [Case Study] ■ Processing Category: High Hardness Parts Processing ■ Product Name: SP Jig ■ Processing Details: MC Lathe, Die-sinking EDM ■ Material: SKD11 ■ Surface Treatment: Laser Marking ■ Heat Treatment: Vacuum Hardening *For more details, please refer to the PDF document or feel free to contact us.
Using the installed tool, polish while holding down the "wrapping chip and S sheet chip."
This product is a tool tip fixture designed to be attached to the tips of air tools and electric tools for use with chips. Using a tool equipped with a chip fixture at the tip, the "wrapping chip / S sheet chip" is used while being held in place. For more details about other products, please contact us. *For more information, please refer to the PDF materials or feel free to contact us.
![[Product Example] Jig for Bar Material](https://image.mono.ipros.com/public/product/image/be4/2001058529/IPROS92813421551949762110.jpeg?w=280&h=280)
A jig for fixing aluminum and other bar materials and preventing scratches! Introducing a cardboard jig.
We would like to introduce a product case from Sakura Pax Co., Ltd., "Jigs for Bar Materials." This jig is designed to secure bar materials such as aluminum and prevent scratches. The material used is cardboard. Please feel free to consult us when you need assistance. 【Case Overview】 ■ Application: Other ■ Industry: Industrial Products/Steel ■ Material: Cardboard ■ Raw Material: Cardboard ABF *For more details, please refer to the PDF document or feel free to contact us.
Metal precision machined parts and toolbox dividers can be custom-made to your specifications! *A collection of examples of custom-made products is available for free!
This is an introduction to custom manufacturing examples of work jigs and partition blocks. At Sakashige, we provide custom manufacturing of various products and jigs tailored to the production site equipment, as well as the needs of workers and the work environment. 【Do you have any of these concerns?】 ■ We want to maintain the precision of parts. We would like the actual measurements to be taken and delivered... ■ We want to stabilize tools by placing partition boards in the toolbox... *Key service areas: Mie Prefecture, Hokusei District, Chusei District (surrounding Mie) *Please view the PDF data of custom processing examples available for download.
Fixture for flat positioning and reference surface machining of cast plates.
This is a tool that processes three reference surfaces—reference surface, flat surface, and back reference surface—using a vertical machining center. The hydraulic clamp and pressure cylinder ensure that there is no distortion in the product even during material removal after processing.
![[Example] Design and manufacture of custom long arbor.](https://image.mono.ipros.com/public/product/image/4b1/2000704562/IPROS06781129218687572508.png?w=280&h=280)
Rigidity that takes into account bending and warping is also necessary! An example designed to maintain the original rigidity.
This blog introduces a custom long arbor that can be attached to the spindles of machine tools such as machining centers. We received a request for the design and production of a custom arbor from a customer who has previously commissioned us for the design and production of processing jigs. The key focus of this project is the length of the arbor. The customer requested this custom size because the workpiece has a vertical wall of approximately 630 to 640 mm, and this length is necessary to perform drilling, tapping, and surface machining while avoiding the wall. First, we gathered all the parts and purchased items for assembly, then installed it on our machining center to check the accuracy. We attached the cutting tool and checked for runout at the tip. As a result, the runout was within 0.015 mm, achieving the target value of 0.02 mm that was discussed with the customer. *For more details about this case, you can view it through the related links. Please feel free to contact us for more information.
Various proposals can be made based on experience and achievements! Please feel free to contact us if you have any concerns about clamping methods or processing procedures.
At Moro Manufacturing, we specialize in single-item processing, handling 1 to 10 pieces per product, and we have equipped our facilities with tools suitable for single-item processing. The work introduced in this blog involves a production quantity of approximately 800 pieces, which qualifies as mass production for our company. The processing material is SS400, with dimensions of 70 x 70 x t35, and the processing involves chamfering at four locations with C20. The intended use of this product is as a positioning component in the center for aligning, stacking, and retrieving donut-shaped products. Since it serves as a rough guide component, if R processing is applied to each corner to prevent scratches on the corresponding parts, high dimensional accuracy is not required. *For more detailed information, please refer to the related links. Feel free to contact us for further inquiries.
![[Sheet Metal and Welding Examples] Welding Jig (for Temporary Scaffolding Components)](https://image.mono.ipros.com/public/product/image/08a/2000355340/IPROS1848546450182364827.jpg?w=280&h=280)
[Sheet Metal and Welding Examples] Welding Jig (for temporary scaffolding components). We will introduce various examples such as prototype sheet metal, prototypes for research and development, and 3D laser applications.
[Sheet Metal and Welding Examples] Welding Jig (for Temporary Scaffolding Parts) Size: 1200 x 600 x 500 At Hayano Kenko, we utilize our expertise in welding technology, 3D laser processing technology, and more to manufacture prototype sheet metal, research and development prototypes, automotive prototype sheet metal, mold fabrication, precision sheet metal, and other products. *For more information on Hayano Kenko's expertise, please refer to the handbook available for download. The handbook is filled with useful information for cost reduction and quality improvement from the perspective of a manufacturing company regarding sheet metal design!
