We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for jig.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

jig Product List and Ranking from 422 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

jig Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. フレックラム Gifu//Machine elements and parts
  2. null/null
  3. 日本クラビス Chiba//Testing, Analysis and Measurement
  4. 4 TOA PRECISION MACHINERY CO., LTD. Osaka//Manufacturing and processing contract
  5. 5 null/null
Go to Company Ranking

jig Product ranking

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. General-purpose jig "2D JIG" フレックラム
  2. Applicator / Coating Tool
  3. Measurement jig for volume change and gas quantity of lithium-ion batteries.
  4. 4 Space Rod (Pin Jig) Hull Block Fixing Jig Hoya International [Shipbuilding/Welding/Industrial Equipment/Steel/Plant Manufacturing - Trading Company,trade ]
  5. 5 Inspection and processing jig "mandrel" 富士精工

jig Product List

541～570 item / All 967 items

Displayed results
Limit Stress Measurement Fixture (Bergen Type 1/4 Elliptical Fixture) Ver. 2.0

Limit Stress Measurement Fixture (Bergen Type 1/4 Elliptical Fixture) Ver. 2.0

The material used is SUS304! Improvements have been made, such as integrating the base into a single piece.

We would like to introduce our "Limit Stress Measurement Jig Ver. 2.0." The material used is SUS304, and the weight is approximately 2 kg. We have made improvements such as integrating the base into a single piece. Additionally, we also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 2 kg ■ Material: SUS304 ■ Improvements made, such as integrating the base into a single piece *For more details, please refer to the PDF document or feel free to contact us.

  • Inspection fixture
  • Testing Equipment and Devices
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Limit Stress Measurement Jig (Bergen Type 1/4 Elliptical Jig) Ver.2.1

Limit Stress Measurement Jig (Bergen Type 1/4 Elliptical Jig) Ver.2.1

Custom modifications for shape and material are also possible! Introducing the Bergen-style 1/4 oval jig.

We would like to introduce our "Limit Stress Measurement Jig Ver.2.1." The compatible test specimens have a thickness of up to 3 mm, a width of 10 to 40 mm, and a length of 100 to 127 mm, with a setup quantity of 1 piece and a band spacing of 8 mm. We have improved it to allow for band adjustments according to the thickness of the test specimen. Additionally, we also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 2 kg ■ Compatible test specimens ・ Thickness: Up to 3 mm, width 10 to 40 mm, length 100 to 127 mm ・ Setup quantity: 1 piece ・ Band spacing: 8 mm ■ Improved to allow for band adjustments according to the thickness of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

  • Inspection fixture
  • Testing Equipment and Devices
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Limit Stress Measurement Jig (Bergen Type 1/4 Elliptical Jig) Ver.3.0

Limit Stress Measurement Jig (Bergen Type 1/4 Elliptical Jig) Ver.3.0

The number of test specimens to be installed is 1 to 6! It is a type that allows multiple specimens to be installed simultaneously.

We would like to introduce our "Limit Stress Measurement Jig Ver.3.0." The compatible test specimens are 1-3 mm thick, 15 mm wide, and 125-150 mm long, with an installation quantity of 1-6 pieces. This type allows for multiple test specimens to be installed simultaneously. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible Test Specimens ・ Thickness: 1-3 mm, Width: 15 mm, Length: 125-150 mm ・ Installation Quantity: 1-6 pieces ■ Material: SUS304 ■ Multiple test specimens can be installed simultaneously *For more details, please refer to the PDF document or feel free to contact us.

  • Inspection fixture
  • Testing Equipment and Devices
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Limit Stress Measurement Jig (Bergen Type 1/4 Elliptical Jig) Ver.3.1

Limit Stress Measurement Jig (Bergen Type 1/4 Elliptical Jig) Ver.3.1

Equipped with a holding plate to prevent the test pieces from floating! Multiple test pieces can be installed simultaneously.

We would like to introduce our product, the "Limit Stress Measurement Jig Ver.3.1." This version allows for the installation of multiple test specimens simultaneously and includes a holding plate added to prevent the specimens from floating, which was an issue in Ver.3.0. The weight is approximately 6 kg, and it is made of SUS304 material. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible Test Specimens ・ Plate Thickness: 1–3 × Width 15 × Length 125–150 mm ・ Installation Quantity: 1–6 pieces ■ Material: SUS304 ■ Allows for the simultaneous installation of multiple test specimens ■ Type with a holding plate added to prevent specimens from floating, as seen in Ver.3.0 *For more details, please refer to the PDF document or feel free to contact us.

  • Inspection fixture
  • Testing Equipment and Devices
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Limit Stress Measurement Jig (Bergen Type 1/4 Elliptical Jig) Ver. 3.3

Limit Stress Measurement Jig (Bergen Type 1/4 Elliptical Jig) Ver. 3.3

Increased adhesion to the curved surface of the test specimen, and improved visibility during work with the addition of scales!

We would like to introduce our product, the "Limit Stress Measurement Jig Ver.3.3." Multiple test specimens can be installed simultaneously. The adhesion to the curved surfaces of the test specimens has been improved, and the addition of scales has enhanced visibility during operation. The weight is approximately 6 kg, and it is made of SUS304. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible test specimens - Thickness: 1–3 × Width 15 × Length 125–150 mm - Number of installations: 1–6 pieces ■ Material: SUS304 ■ Multiple test specimens can be installed simultaneously ■ Improved adhesion to the curved surfaces of the test specimens, and enhanced visibility during operation due to the addition of scales *For more details, please refer to the PDF document or feel free to contact us.

  • Inspection fixture
  • Testing Equipment and Devices
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SMS18-30 (with magnet) Spring Mini Support

SMS18-30 (with magnet) Spring Mini Support

SMS18-30 SMS18M-30M (with magnet) Spring mini support Super tool

Spring Mini Support - Super Tool SPRING MINI SUPPORT SMS18 SMS30 SMS18M SMS30M (with magnet) Features Ideal for preventing workpiece vibration with built-in spring. Supports the workpiece in a natural state without deformation. Can be used as a dedicated low-height fixture or as a general-purpose tool. Spring adjustment can be made from both the top and bottom. The shaft material is SK steel with a hardness of 60 HRC. Both the body and surface are treated with electroless nickel plating to enhance surface hardness and rust resistance. The version with a magnet does not shift position due to vibration.

  • Other work tools
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-efficiency and high-precision processing of castings that are difficult to set up with in-house jigs.

High-efficiency and high-precision processing of castings that are difficult to set up with in-house jigs.

Early delivery and cost reduction! A one-of-a-kind jig designed and manufactured by craftsmen who are experts in processing!

Our company designs and manufactures processing jigs, and we perform machining of difficult-to-set-up castings with complex shapes and thin materials using vertical and horizontal machining with our own jigs. We are active in a wide range of fields, including medical equipment, machine tools, and automobiles. We respond to complex shapes and thin materials that are difficult to set up, achieving shorter delivery times and lower costs through the reduction of setup numbers with our unique jigs. From full-scale jigs to simple jigs, we flexibly accommodate requirements with low costs and quick delivery times. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other machine elements
  • Processing Jig
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Machining Fixture (Machining Jig) "Hydraulic Encapsulated Fixture"

Machining Fixture (Machining Jig) "Hydraulic Encapsulated Fixture"

We will make proposals based on the customer's requests, whether it is a hand-tightening type, a standard hydraulic type, or a hydraulic sealing type.

In a conventional hydraulic system, the hose must always be connected during the clamping of the workpiece, but in a hydraulic encapsulation system, the hose only needs to be connected during the loading and unloading of the workpiece, allowing for greater flexibility in processing. Therefore, it is possible to rotate the entire table of the machine tool to accommodate multiple workpieces, and it is also feasible to send the clamped workpiece to the next machine tool using a transport device. For the design and manufacturing of various jigs such as machining jigs and inspection jigs, please leave it to Toa Seiki Kogyo. For more details on dimensions, materials, processing accuracy, etc., please contact us or download the PDF to view.

  • Processing Jig
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
5-axis control machining fixture

5-axis control machining fixture

The existing machine can perform 5-axis controlled machining.

"Is it possible to perform more complex machining with a single chuck?" In response to such requests, many machine tool manufacturers have developed 5-axis controlled machining machines in recent years. Similar machining can now be achieved with your current machine (3-axis control). For details on dimensions, materials, machining accuracy, etc., please contact us or download the PDF for more information.

  • Processing Jig
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outer and inner diameter grinding machine "G Taro" *A grinding machine that can be used for both outer diameter and inner surface.

Outer and inner diameter grinding machine "G Taro" *A grinding machine that can be used for both outer diameter and inner surface.

[New Development] A grinding machine that can perform both outer diameter grinding and inner surface grinding with this one unit!

The "G Taro" external and internal grinding machine is a grinding machine equipped with devices for grinding both external diameters and internal surfaces in one unit. Previously, separate machines were required for each function, but as factories aim to save space, Tohwa Seiki Industry has newly developed this machine. The "G Taro" external and internal grinding machine is scheduled to be showcased alongside our jigs at this year's JIMTOF 2014! Please look forward to Tohwa Seiki Industry, which supports not only high-precision jigs but also the machining field. *For more details, please download the PDF and take a look.

  • G太郎2.jpg
  • G太郎3.jpg
  • G太郎4.jpg
  • G太郎5.jpg
  • Grinding Machine
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ideal for processing small parts! Six-sided scale jig [Pneumatic jig]

Ideal for processing small parts! Six-sided scale jig [Pneumatic jig]

In response to the recent trend of diverse workpieces and small lot sizes, a fixture has been developed that utilizes a parent-child fixture system, allowing for the adaptation to various workpieces through the changing of child fixtures.

Toa Seiki Kogyo offers proposals tailored to customer needs, from the design to the manufacturing of various jigs, including machining jigs and inspection jigs. The six-sided scale jig achieves reduced man-hours and increased productivity through high-power air clamps! 【Products】 ■ Machining jigs ■ Inspection jigs ■ Various gauges ■ Various dedicated machines ■ Special processing ■ 5-axis control machining jigs *For details on dimensions, materials, processing accuracy, etc., please contact us or download the PDF for more information.

  • Processing Jig
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ideal for small parts processing! 【Small Tilt Jig】

Ideal for small parts processing! 【Small Tilt Jig】

A fixture using a hole clamp on a tilting A-axis fixture equipped with a small machining center.

Toa Seiki Kogyo offers proposals tailored to customer needs, covering everything from the design to the manufacturing of various jigs, including machining jigs and inspection jigs. The six-sided scale jig achieves reduced man-hours and increased productivity through high-power air clamps! 【Product Items】 ■ Machining jigs ■ Inspection jigs ■ Various gauges ■ Various dedicated machines ■ Special processing ■ 5-axis control machining jigs *For details on dimensions, materials, processing accuracy, etc., please contact us or download the PDF to view.

  • Processing Jig
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A-axis machining fixture with automatic paragraph break system

A-axis machining fixture with automatic paragraph break system

You can change the child jigs without using robots! This reduces the cost of expensive robots and teaching.

You can change the sub-jigs without using robots. With this specification, you can reduce the costs of expensive robots and teaching. It is suitable for processing a variety of small quantities, changing setups daily, and handling different workpieces. Even if the workpiece changes, you can process it by creating new sub-jigs only. This contributes to cost reduction. ● For the design and manufacturing of various jigs such as machining jigs and inspection jigs, please leave it to Toa Seiki Kogyo. ○ For details on dimensions, materials, processing accuracy, etc., please contact us or download the PDF to view.

  • Processing Jig
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-lightweight hydraulic internal piping processing fixture

Ultra-lightweight hydraulic internal piping processing fixture

No issues with direct tap processing! Hole accuracy is H7, and pitch accuracy can be ±0.01/150 or less.

We handle the "Furcarbon," a thick plate made of CFRP for cutting processing, used in our "Ultra-Lightweight Hydraulic Internal Piping Processing Tool." As long as there is no loosening or tightening of bolts due to setup changes, direct tapping processing can be performed without issues, and G threads are used for hydraulic plugs. Basically, we process it with the same man-hours as regular processing, so the processing cost does not differ significantly from standard aluminum processing. [Unique Verification Test Results] ■ Conducted a pressure leak test at 3MPA hydraulic pressure: No oil leakage ■ Left under 3MPA hydraulic pressure for 24 hours: Pressure gauge confirmed no pressure drop ■ Repeated pressure insertion and release under the above conditions: No oil leakage, no pressure drop ■ Measurement inspection of shape change: Measured with a dial gauge, ±0.005 or less, almost no change *For more details, please download the PDF or feel free to contact us.

  • IPROS61409957173420171318.png
  • 2.PNG
  • Processing Jig
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Film feeder "GFF series" [low cutting noise and vibration, compact size]

Film feeder "GFF series" [low cutting noise and vibration, compact size]

A film feeder that achieves significant cost reduction by using roll film, which is cheaper than cut film!

This is a film feeder that allows the next film to come out immediately just by pulling the film. There are three types available, each corresponding to roll films with widths of 50–180mm, up to 250mm, and up to 380mm. It is compact and lightweight, producing minimal cutting noise and vibration, thus saving space. 【Features】 - Minimal noise and vibration during cutting, and its compact size means it doesn't take up installation space. - The next film comes out immediately just by pulling the film, making it usable even for inexperienced users. - The cutter unit can be attached and detached without tools. - It uses low-cost cutter blades, making replacements easy. - Using inexpensive roll films helps reduce costs. - There is no need to stock a large variety of film sizes. - Since cutting is done with a cutter, there is no smoke or odor from methods like heat wire. *For more details, please request materials or view the PDF data available for download.

  • Other packaging machines
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product Introduction: "Jigs"

Product Introduction: "Jigs"

High-quality product creation! We meet customer needs down to 1 micron!

"Jigs" are products of Daiko Seiki Co., Ltd., which engages in the design and manufacturing of screw gauges (general), ultra-precision parts processing, processing jigs, inspection jigs, and special measuring instruments. Our company specializes mainly in inspection jigs. We create a master that is the same as the workpiece and read the dimensional differences using a dial gauge through comparative measurement with the master. The final assembly jig accuracy is 0.01 or better, and the master accuracy is ±0.001, so please feel free to consult us regarding shapes and sizes. 【Products Handled】 ■ Measuring Jigs *For more details, please refer to the catalog or feel free to contact us.

  • Other machine elements
  • Contract manufacturing
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Silicon dodecahedron

Silicon dodecahedron

These are polyhedral processing samples of hard-to-cut materials such as alumina, silicon, and glass.

Silicon cut from a 30-degree angle was processed into a polyhedron using a special axis. Precision three-dimensional processing of materials like glass is difficult because they are sintered bodies, requiring considerable ingenuity to achieve processing accuracy by completion. Since processing marks and cracks can easily occur, a sufficient processing image is necessary.

  • Other semiconductors
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
JL insert mounting jig A jig

JL insert mounting jig A jig

It is used when the insert cannot be directly fixed with bolts when setting it into the mold.

The JL insert mounting jig A is used when the insert cannot be directly fastened with bolts while setting it into the mold, or when you want to recess the surface of the insert screw section from the concrete surface. The cap is made of resin and is reusable, while the main body is made of iron and comes in both screw-type and welded types. For more details, please contact us or refer to the catalog.

  • bolt
  • nut
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mogi Iron Works Co., Ltd. Business Introduction

Mogi Iron Works Co., Ltd. Business Introduction

Mogi Iron Works specializes in heat treatment jigs and stainless steel processed products.

Mogi Iron Works Co., Ltd. is a company located in Yashio City, Saitama Prefecture, specializing in heat treatment jigs and stainless steel processed products. Our product lineup includes heat treatment jigs, baskets, wire mesh, trays, jig design and repair, furnace internal parts, retort, salt pots, hearth rollers, furnace rollers, machine canning, machining, aluminum processing, maintenance work, brickwork, and the manufacturing and sales of mold drop prevention jigs and fittings. The materials we handle include SUS310S, SUS309S, SUS316L, SUS316, SUS304, SUS430, SS400, S45C, SCM420, among others. For more details, please contact us or download our catalog.

  • Processing Contract
  • Processing Jig
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power, Electronics, Plasma Related - Plasma Experiment Fixture 1

Power, Electronics, Plasma Related - Plasma Experiment Fixture 1

Before thinking of reasons why you can't do it, think of ways you can do it.

Equipment List Model Quantity Wire EDM Machine 3 NC Type Die-Sinking EDM Machine 1 Machining Center 2 Milling Machine 4 Jig Borer 1 Precision Surface Grinder 3 Precision Universal Grinder 1 Ultra-Precision External Grinder 2 External Grinder 1 Ultra-Precision Internal Grinder 1 Internal Grinder 1 NC Lathe 1 Lathe 1 Tool Grinder 3 Others 8 2D/CAD 2 3D/CAD 1

  • Other physicochemical equipment
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power, Electronics, and Plasma Related - Plasma Experiment Fixture 2

Power, Electronics, and Plasma Related - Plasma Experiment Fixture 2

Before thinking of reasons why you can't do it, think of ways you can do it.

Equipment List Model Quantity Wire EDM Machine 3 NC Die-Sinking EDM Machine 1 Machining Center 2 Milling Machine 4 Jig Borer 1 Precision Surface Grinder 3 Precision Universal Grinder 1 Ultra-Precision OD Grinder 2 OD Grinder 1 Ultra-Precision ID Grinder 1 ID Grinder 1 NC Lathe 1 Lathe 1 Tool Grinder 3 Others 8 2D/CAD 2 3D/CAD 1

  • Other physicochemical equipment
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Filling jig for heating release tube

Filling jig for heating release tube

Analytical instruments and physical and chemical equipment original products

Analysis of emissions from office equipment and home appliances, indoor air analysis, workplace environment analysis, and in-vehicle air analysis.

  • Analytical Equipment and Devices
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Socket block and jig for charging and discharging tests of lithium-ion batteries.

Socket block and jig for charging and discharging tests of lithium-ion batteries.

The price is half that of conventional products! There are no contact failures, and maintenance is easy. Custom products are also available.

When evaluating and testing lithium-ion batteries, sockets and fixtures for securing the batteries are essential. Our socket features a unique method for securing probe pins, ensuring that even if the circuit board is warped, there will be no contact failure with the battery. Additionally, after prolonged use, if contact failure does occur, only the affected block can be removed and replaced, making it highly maintainable. The "battery charge and discharge socket block," which excels in performance, cost, and maintainability, is currently pending patent application. 【Features】 - No contact failures, reducing maintenance effort - Each block can be removed for quick partial replacement - Product price is half that of conventional products - Custom products can be delivered in just 2 weeks - Easy temperature rise management at the socket block level For more details, please contact us or download the catalog.

  • Testing Equipment and Devices
  • socket
  • Other machine elements
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Proposal for a labor-saving device

Proposal for a labor-saving device

Industrial machinery equipment fixtures: Integrated production system for planning, design, processing, and assembly.

Based on meetings with customers, we create 2D drawings, 3D drawings, and modeling diagrams to ensure that the proposal for equipment and jigs proceeds smoothly.

  • 3D CAD
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Custom-made printed circuit boards and inspection equipment manufacturing.

Custom-made printed circuit boards and inspection equipment manufacturing.

Proposal for work efficiency improvement and short delivery production: Comprehensive support from FIX production to inspection control circuits and inspection software.

Our "Inspection Jig Control Technology Group" is engaged in the custom manufacturing and improvement proposals for the inspection processes of precision equipment, which require various needs, as well as efforts for short delivery times. We provide consistent support from FIX manufacturing to inspection control circuits and inspection software. We manufacture various types of jigs, such as hand press jigs (scissor type, vertical lift type, custom type), tailored to different work applications. [Examples of Manufacturing] - Fixtures for various in-circuit testers - Press units for various function testers - Design and machining of process jigs - Manufacturing of inspection jigs for fine-pitch devices - Production of jigs for assembly support *For more details, please refer to the PDF materials or feel free to contact us.

  • Inspection fixture
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manufacturing achievements of the organization

Manufacturing achievements of the organization

Mechanism design that meets customer requests! Also compatible with various measurement device interlocking control.

We would like to introduce our "mechanical manufacturing achievements." We manufacture fixture inspection jigs designed for approximately 100 pins (hand press type), fixture inspection jigs intended for 600 pins or fewer (semi-automatic air cylinder type), and fixture inspection jigs (inline type), among others. Please feel free to contact us when you need assistance. 【Mechanical Manufacturing Achievements】 ■ Fixture Inspection Jigs (Hand Press Type) ■ Fixture Inspection Jigs (Semi-Automatic Air Cylinder Type) ■ Fixture Inspection Jigs (Inline Type) ■ Various Mechanisms (Custom Design) ■ Control of Various Measuring Instruments (PC Control, PLC Control, LabVIEW) *For more details, please refer to our company brochure.

  • 12a.png
  • 12b.png
  • 12c.png
  • Inspection fixture
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mate System Work - Welding Jigs and Welding Equipment

Mate System Work - Welding Jigs and Welding Equipment

We specialize in the design and manufacturing of welding jigs used in the process of making Assy parts.

Among the jigs that require precision, we specialize in the design and manufacturing of welding jigs used in the process of making assembly parts. We have a wide range of transactions with various industries, including automotive parts, home appliances, and manufacturers of pressed parts.

  • Welding Machine
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Various standalone welding equipment, spot robot welding fixtures.

Various standalone welding equipment, spot robot welding fixtures.

We have a track record of delivering various welding equipment, starting with Toyota Motor Corporation and extending to Toyota-related companies.

Not only spot welding, but also automatic welding equipment and jigs for projection welding, arc welding, seam welding processes, as well as a wide range of accessories for the production line, including drilling machines and conveying devices, can meet the diverse needs of users.

  • Processing Contract
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
G-Link Tools Design & Tool Manufacturing

G-Link Tools Design & Tool Manufacturing

Leave all your fixture design and manufacturing to us! We will handle everything from the design to the manufacturing and installation of fixtures according to your concepts and requirements.

- Assembly jigs for electronic devices, automotive parts, etc. - Soldering jigs for electronic circuit boards - Harness assembly/inspection jigs - Component press-fit jigs - Component welding jigs - Various inspection jigs - Product inversion machines - Dedicated tools for work support - Welding jigs While considering the user experience of those who will actually use them, we prioritize "ease of use!" and design with a focus on achieving a high level of quality and cost-effectiveness. We have numerous achievements and know-how with electronic device manufacturers, automotive parts manufacturers, medical device manufacturers, and more. We produce everything from simple work assistance tools to types combined with various sensors and controls. Our company has a structure that includes mechanics, electronics, and software, allowing for consistent development not only in design using 3D/2D CAD but also in related control design and software. Additionally, our company is based in Hamamatsu City, Shizuoka Prefecture, which provides a location that is easily accessible to various regions for prompt responses. We cater to the Tokai region, as well as the Kansai and Kanto regions, and of course, other areas as well (primarily Tokyo, Osaka, Aichi, Nagoya, Kanagawa, Saitama, Mie, Gifu, Nagano, Yamanashi, and other regions).

  • Inspection fixture
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tooling Revolution

Tooling Revolution

All you need is the product drawing! We will manufacture it without jig drawings and at a design cost of 0 yen.

At OKS Co., Ltd., we offer a service called "Jig Revolution," which manufactures automotive parts using wooden pattern jigs. Speed and cost are 50% off. For areas requiring strength, precision, and movement, we also use a combination of resin and metal. Additionally, since we manufacture from a reference plate, there is zero assembly labor for setup changes. It is lightweight, making it easy for women to handle. 【Features】 ■ Only product drawings are needed ■ Supports up to 4 meters ■ Combination of metal and resin ■ Zero jig setup labor *For more details, please refer to the PDF document or feel free to contact us.

  • Contract manufacturing
  • jig

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to jig

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.