プロテック Company Overview

The "Interconnection Prevention Connector Testing Machine PT-4600MC" is a device capable of performing "pre-assembly testing" and "torsional stress testing" in accordance with ISO80369. Previously, it was manufactured and sold as the "Medical Connector Testing Machine PT-1946MC," but it has now been renewed as the "Interconnection Prevention Connector Testing Machine PT-4600MC." (With this renewal, the PT-1946MC will be discontinued.) In addition to conventional position control, torque control has been made possible, allowing for the setting of detailed testing conditions in accordance with ISO80369. Additionally, an optional touch panel can be added, enabling testing without the need for a computer. We hope this will be useful for the performance evaluation of interconnection prevention connectors. A product promotional video is also available! For more details, please feel free to contact us or refer to the product page or catalog.

This is a "small air press machine" that accommodates the installation of fixtures for functional testing of small-sized substrates, utilizing a movable air cylinder. Press operations are performed using a two-handed control box, but PC control can be added upon request. Additionally, by adding area sensors, safety during pressing is taken into consideration. ● Press load: Capable of pressing approximately 15 kg with an air pressure of 0.3 MPa (equivalent to 75 probes with a spring pressure of 200 g) ● Supports a maximum substrate size of 195 mm x 130 mm ● Outline dimensions: W250 x D400 x H360 (W300 when equipped with area sensors) ● By exchanging fixtures, it is possible to connect various inspection substrates (fixtures corresponding to the inspected substrates can also be manufactured by our company) ● Pressing is operated by button control with both hands ● With the optional area sensor, if an obstacle is detected, the press (upper pin board) will rise ● Optional support for a pass stamp is also available ● Optional addition of press operation via PC control is possible For product inquiries, please refer to the page catalog or feel free to contact our company.

This is a "friction sliding testing machine" that allows for testing by sliding a friction plate against guide wires and catheters at a constant speed, applying friction from side to side. It is capable of measuring the frictional force on the work surface. Equipped with a hot water tank, it enables testing in water maintained at a constant temperature. The measurement results are displayed in real-time as graphs on a PC, and the measurement data can be saved in CSV file format. Additionally, parameters can be set arbitrarily. It is capable of conducting 500 durability reciprocating tests.