We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(20) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

nozzle Product List

61～90 item / All 394 items

Displayed results
Free distribution of the comprehensive catalog for humidifying and moisture-regulating spray nozzles.

Free distribution of the comprehensive catalog for humidifying and moisture-regulating spray nozzles.

An air spray humidifier ideal for humidity control, static electricity prevention, and dust suspension prevention in factories and warehouses. We have renewed the catalog by adding peripheral equipment!

The humidifying and moisture-regulating spray nozzle catalog has been renewed! It sprays ultra-fine mist that does not wet the floor or surroundings using compressed air! It demonstrates exceptional capability for space humidification in industrial air conditioning. This energy-saving model reduces air consumption by approximately 20% compared to conventional models. There are six types of nozzles available, with spray water volumes ranging from 1.0 to 18L/h (air pressure 0.3MPa). The main unit can accommodate one to four nozzles. It provides a wide range of variations, from rich fog to fine mist, to prevent static electricity, dust suspension and adhesion, and cooling in indoor spaces such as factories and warehouses. ■ For more details, please download the catalog or contact us ■ Spraying Systems, a global brand of spray nozzles, offers nozzles suitable for various applications based on over 90,000 items of proven performance. *For information about spraying nozzles, please download the PDF or contact us.*

  • Humidification device
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Life with Ultra Fine Bubbles

Life with Ultra Fine Bubbles

Ultra-fine bubbles (nano bubbles) that can be used in a wide range of scenes such as bathrooms, kitchens, and water heaters!

The "UFB DUAL" is an ultra-fine bubble generation nozzle that has obtained JET mark certification. By installing the UFB DUAL at the main water supply, it is possible to turn all tap water in the building into ultra-fine bubbles. The cleaning power of ultra-fine bubbles keeps the building clean the more water is used. In a typical household, it is effective in all water-related areas such as bathrooms, kitchens, and water heaters. Additionally, we offer a range of sizes that can accommodate everything from residential homes to factories and large facilities. Please feel free to contact us. 【Features】 ■ By installing it at the main water supply, it is possible to turn all tap water in the building into ultra-fine bubbles. ■ Ultra-fine bubble water has high cleaning power. ■ The more water is used, the more ultra-fine bubbles are generated, keeping the building clean. ■ Makes it easier to remove dirt from dishes. ■ By purifying the inside of the water heater, it prevents a decrease in heat exchange efficiency, thus avoiding increases in electricity and gas bills. ■ Washes away biofilm inside the distribution pipes and prevents reattachment of biofilm. *For more details, please refer to the PDF document or feel free to contact us.

  • 2023-03-28_13h51_40.png
  • 2023-03-28_13h51_44.png
  • 2023-03-28_13h51_52.png
  • 2023-03-28_13h51_57.png
  • 2023-03-28_13h52_04.png
  • others
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Even major general contractors! Attention is also being drawn to the cleaning power of ultra-fine bubbles.

Even major general contractors! Attention is also being drawn to the cleaning power of ultra-fine bubbles.

Efforts are underway to eliminate leftover concrete and returned concrete generated at construction sites using ultra-fine bubbles (nano bubbles).

Although this is an example from another company... In recent years, ultra-fine bubbles have been utilized in various ways beyond just cleaning power. Ultra-fine bubbles are gaining attention as a technology that contributes to achieving a decarbonized society in concrete production sites with high CO2 emissions. Major general contractors have implemented a system to eliminate leftover concrete and returned concrete at construction sites, which has been put into practical use at large-scale production facility construction sites. By mixing ultra-fine bubbles into the remaining liquid from leftover and returned concrete, CO2 can be efficiently absorbed and fixed. UFB DUAL can also be customized to create nozzles made from materials suitable for the desired application. Additionally, UFB DUAL is characterized by the ability to create large-diameter models. ◇ UFB DUAL generates ultra-fine bubbles using only water flow, so no pumps or power supply are needed. It connects directly to the water supply pipe, eliminating the need for securing space for placement. 【Features of UFB DUAL】 ■ JET mark certified product ■ Special structure that maintains water volume and pressure ■ Clean structure that does not take in outside air ■ Patent-protected product ■ Maintenance-free

  • others
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Low Price] Solve delivery issues with improved processing efficiency! 'Sniper Nozzle'

[Low Price] Solve delivery issues with improved processing efficiency! 'Sniper Nozzle'

The processing fluid evenly contacts the grinding stone and workpiece. It can be easily attached to existing coolant hoses.

The "Sniper Nozzle" is a product that improves the concentration and uniformity of cutting fluid by attaching it to the coolant hose. It increases the density of the cutting fluid and discharges a consistent water flow without variation. It penetrates the gaps between the grinding wheel and the workpiece, enhancing processing efficiency. It can be easily attached to existing machine tool coolant hoses. It is also available at a reasonable price starting from 60,000 yen. 【Features】 ■ Increases cutting depth and reduces processing time ■ Minimizes damage to the grinding wheel and reduces wear ■ Easy attachment to your existing coolant hose ■ A wide variety of sizes available *For more details, please download the catalog or contact us.

  • Wafer processing/polishing equipment
  • Other machine tools
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Steel coolant nozzle

Steel coolant nozzle

Due to the stainless steel material, the nozzle position can be maintained even under interference from high-pressure coolant and cutting.

The flexible coolant nozzles we offer can be used with fixed head and Swiss-type CNC lathes, vertical and horizontal machining centers, grinders, or transfer machines for low, medium, and high pressure applications. 【Features】 ■ Can be used hand-tightened at pressures below 20 bar (However, for high pressure, tightening with a wrench is necessary) ■ Capable of withstanding vibrations and pressure during cooling while maintaining position ■ Usable with water-soluble and oil-based coolants ■ The surface of the main body is nearly equivalent to stainless steel in terms of corrosion resistance *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

  • Piping Materials
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sniper Nozzle

Sniper Nozzle

It enters the gap between the workpiece and the magnet, stealing away processing heat! Suitable for side polishing as well.

By simply attaching the "Sniper Nozzle" to the end of the coolant hose, the concentration and uniformity of the cutting fluid will change dramatically, allowing for a completely different machining experience than before. You can also expect significantly improved quality results. It can be selected according to sizes such as grinding wheel width and drill diameter. We offer an affordable "SIO First Kit" that includes this product and SIO. 【Features】 ■ Increase cutting depth and reduce machining time ■ Minimize grinding wheel damage and reduce wear ■ Easy attachment to your existing coolant hose ■ Deliver a uniform water flow evenly to the workpiece ■ Ensure precise application to the workpiece *For more details, please refer to the PDF document or feel free to contact us.

  • Wafer processing/polishing equipment
  • Other machine tools
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
風量増幅型エアノズル『トランスベクター』

風量増幅型エアノズル『トランスベクター』

駆動源は圧縮空気のみで、電気部品・回転部品がありません！揮発性ガス等の吸引・排出が可能

『トランスベクター』は、設置スペースをとらず、取付が簡単な 風量増幅型エアノズルです。 風量が圧縮空気消費量の4～20倍と多くなるため、圧縮空気消費量(ランニングコスト) が大幅に節約できます。さらにブロー角度が全角15度と広いため、ノズル本数を 減らすことも可能です。 銅チューブのブロー音に比べて約10dB(A)騒音が低くなります。 【特長】 ■省エネ ■低騒音 ■防爆 ■コンパクトメンテナンスフリー ※詳しくは関連リンクをご覧いただくか、お気軽にお問い合わせください。

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vibrating Jet Nozzle "LPX-DS"

Vibrating Jet Nozzle "LPX-DS"

Drying agents, waxes, and water application, suitable for many other uses as well!

The "LPX-DS" is a swinging jet nozzle developed for car wash applications. It is designed to generate large droplets, making it less susceptible to airflow effects. Additionally, due to the characteristics of the swinging jet nozzle, the droplets rotate, providing high stability. Moreover, it is resistant to clogging, does not require high pressure, and improves the overall processing speed of the system across a wide range of applications. 【Features】 ■ All-rounder for liquid spraying ■ Generates large droplets ■ Droplets are less likely to be blown away by the wind ■ Operating pressure: 0.1 to 2.0 MPa (1-20 bar) ■ Optimized for use with fluids ■ Reduces energy costs, water consumption, additives, chemicals, and environmental impact *For more details, please download the PDF or feel free to contact us.

  • 4a.png
  • 4b.png
  • 4c.png
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Selective nozzle for soldering equipment

Selective nozzle for soldering equipment

By integrating it, we reduce costs and improve workability during replacement! Surface treatment extends its lifespan.

We would like to introduce the "Selective Nozzle for Soldering Equipment" that we handle. By using materials and surface treatments suitable for soldering, we achieve a long lifespan and offer it at a low cost. We can also manufacture the base of the nozzle. 【Features】 ■ Selection of materials and surface treatments that are strong against solder, improving durability ■ Stability of soldering jet conditions ■ Improvement of surface roughness and reduction of oxide adhesion ■ Low cost ■ Improved precision by integrating the flange and nozzle *For more details, please download the PDF or feel free to contact us.

  • Other electronic parts
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra Fine Bubble Generation Nozzle 'UFB DUAL'

Ultra Fine Bubble Generation Nozzle 'UFB DUAL'

Achieving a clean treatment environment! All the water in the clinic is ultra-fine bubble water!

We handle the ultra-fine bubble generation nozzle 'UFB DUAL', which has obtained certification as a water supply device. In addition to being used in the unit tubes of examination tables, it can be used in various situations where tap water is utilized, such as for oral care of patients and cleaning instruments in disinfection rooms. Furthermore, by using it in the in-house pipeline, it detaches biofilms that proliferate when water stagnates, such as during nighttime or on holidays, and prevents reattachment, keeping the system consistently clean. 【Benefits】 ■ Detachment of biofilms in unit tubes and prevention of reattachment ■ Prevention of clogging in units ■ Prevention of corrosion of treatment instruments ■ Effective for patient mouth rinsing *For more details, please download the PDF or feel free to contact us.

  • Water bottle and nozzle
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra Fine Bubble Generation Nozzle "Nano Celeb" 15A

Ultra Fine Bubble Generation Nozzle "Nano Celeb" 15A

Ultra-fine bubble generation nozzle for 15A equipment and piping that can be introduced at low cost.

Our industrial and commercial ultra-fine bubble generation nozzle "NanoCeleb 15A" generates a large number of ultra-fine bubbles using special technology by simply being installed on 15A piping, utilizing approximately 2% of the air contained in the water. It contributes to solving various industry problems through the cleaning power enhanced by the surfactant action characteristic of ultra-fine bubbles. ■ Structure that generates ultra-fine bubbles at tap water pressure levels ■ Ultra-fine bubbles generated in a 1-pass (inline) system ■ Compact and lightweight ■ Maintenance-free, with no running costs or electricity required ■ Unlike equipment types, no additional space is needed

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Demo unit available for loan!】Sonic Air Knife System (Blower Type)

【Demo unit available for loan!】Sonic Air Knife System (Blower Type)

Blow away water, dust, and dirt from parts with high-speed air and dry quickly. Demo units are also available for loan!

Water removal drying with Sonic Corporation's blower and air knife! By rotating the fan inside the blower at a minimum of approximately 12,000 rpm to 20,000 rpm, it is possible to achieve a larger airflow than compressors or domestic blowers. Additionally, one of the greatest features of the Sonic air knife system is that it is very economical, consuming only a fraction of the power compared to similar operations using conventional compressed air. Environmentally, it not only operates at low noise levels but also contributes to the reduction of carbon dioxide emissions due to its low power consumption. Demo units are available for loan, so please feel free to contact us. 【Demo Units】 ★ Unit 1 (Sonic 70) Flow rate: 3 Nm³/min to 13 Nm³/min Motor size: 5.5 kW *With inverter ★ Unit 2 (Sonic 85) Flow rate: 4 Nm³/min to 20 Nm³/min Motor size: 7.5 kW *With inverter ★ Air Knife Total length: 610 mm Maximum wind speed: approximately 170 m/sec Connection diameter: 3 inches Slit width: approximately 1 mm Note: Please contact us if you need a hose.

  • IMG_0843.JPG
  • Pneumatic Equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shaking Jet Nozzle "LPX-PC"

Shaking Jet Nozzle "LPX-PC"

Ideal for industrial cleaning! Maintains a specified spray angle regardless of flow rate or pressure.

The "LPX-PC" is a swinging jet nozzle with high impact performance. The oscillation of the fluid generated by this product enhances cleaning capability, allowing for efficient cleaning of particles, recesses, and holes using the oscillating jet. It demonstrates a significant time-saving effect during continuous cleaning, contributing to the reduction of cleaning time in turntable and basket-type cleaning machines. Additionally, it has no moving or wearing parts, which reduces maintenance frequency. 【Features】 ■ Suitable for industrial cleaning ■ Operating pressure: 0.1 to 2.0 MPa (1-20 bar) ■ Maintains a specified spray angle regardless of flow rate and pressure ■ No moving or wearing parts, reducing maintenance frequency ■ Reduces energy costs, water consumption, additives, chemicals, and environmental impact *For more details, please download the PDF or feel free to contact us.

  • 5a.png
  • 5b.png
  • 5c.png
  • 5d.png
  • 5e.png
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COW cleaning nozzle

COW cleaning nozzle

A nozzle that moves in multiple directions and rotates targets the sediment, accumulated sludge, and debris in oil storage tanks! Introducing a high-pressure cleaning device.

● This is a device that cleans sludge and debris that has settled and accumulated on the inner surface of oil storage tanks using high pressure. ● Cleaning solution is sprayed from the nozzle tip to dissolve the deposits. ● The spray distance of the cleaning solution reaches approximately 20 meters at a supply pressure of 0.7 MPa. ● To avoid explosion accidents caused by vaporized gases inside the tank, all rotation and motion control is managed by air, with no electricity used at all. ● The nozzle tip rotates in both horizontal and vertical directions simultaneously on two axes, allowing for more efficient spraying of the cleaning solution over a wider area. ● The angles of the upper and lower nozzles can be limited to specific ranges, such as 135 degrees upward or 45 degrees downward, enabling targeted spraying. ◎ For more details, please contact us.

  • Other cleaning machines
  • Power Transmission Equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brass C3604 (c3604) nozzle gas Osaka

Brass C3604 (c3604) nozzle gas Osaka

If you need brass machining in Osaka, leave it to us! [Brass C3604 (c3604) Nozzle Gas Osaka]

【Brass C3604 (c3604) Nozzle Gas Osaka】 【Material】 C3604 (c3604) 【Industry and Application】 Gas equipment related industry 【Lot】 1 to 10,000 【Dimensions】 Diameter 20mm × Length 60mm 【Processing】 NC lathe 【Features】 This is processed using C3604. Since our establishment, we have been processing brass parts related to gas equipment for about 70 years. Gas leaks are unacceptable due to the risk of fire and adverse effects on human health, so we have maintained a quality-first approach in our processing to this day. If you are having trouble with brass processing related to gas equipment, please consult Matsui Seisakusho! We can manufacture at our headquarters in Osaka, Tottori factory, and China factory. Also, feel free to entrust us with brass hot forging, brazing, assembly, leakage testing, and more!

  • 大阪工場3.PNG
  • valve
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rotary blower nozzle / Part number M2352SG-51K

Rotary blower nozzle / Part number M2352SG-51K

Ultimate air gun! Perfect for draining water, removing dust, and cutting oil!

■Operation Description of the Rotating Blower Nozzle (During Wave Generation) ●When air is supplied, the tube begins to move due to pressure and starts to rotate along the inner wall of the internal rotor. In that state, if you place your hand over the nozzle of the rotating blower, you will feel a sensation of being intermittently struck by air. That is the wave. ●The waves generated by the rotation of the tube create an air impact force proportional to the rotation speed. (In the series, more than 20 times per second) ●The internal rotor (white cover) is a component that synchronously rotates with the nozzle tube section. This reduces friction resistance during rotation, minimizing dust generation and wear.

  • Industrial Vacuum Cleaners
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water supply connection mist kit

Water supply connection mist kit

Easy mist directly connected to the water supply! Easy to install, no pump required, no power needed.

The "Water Supply Connection Mist Kit" is a product that requires no pump or compressor and does not need a power source. It can create mist simply by connecting to a water supply. It allows for easy setup and comes with all the necessary parts for installation. Additionally, we offer "high-quality mist" using a high-pressure pump, the "Mist Twister Series" that creates a mist space with a fan and fine mist carried by the fan's airflow, and a "Mist Pump Unit" that only requires a water source and power supply. Please feel free to contact us if you have any inquiries. 【Features】 ■ Easy installation ■ No pump required ■ No power source required *For more details, please refer to the PDF document or feel free to contact us.

  • 2.PNG
  • 3.PNG
  • 4.PNG
  • 5.PNG
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water supply connection mist kit

Water supply connection mist kit

Selectable fine mist for cooling air conditioning

■Low Pressure Easy Mist Pump Set No pump or compressor needed, and no power required. Just connect to a water supply to create mist. Easy setup. All necessary parts for installation and connection are included. ■High Pressure Mist Pump Unit Generates fine mist around 20μm using a high-pressure pump and dedicated nozzle. For mist cooling, performances, and more.

  • Other processing machines
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection Molding Mixing Nozzle "TMN Series"

Injection Molding Mixing Nozzle "TMN Series"

Eliminate color unevenness and temperature unevenness! Achieve quality improvement and cost reduction for resin molded products.

The "TMN Series" is a distinctive color and thermal variation elimination device for injection molding machines, developed using Toray's advanced polymer technology as an application device for the well-established Toray stationary pipe mixer. By simply replacing the current nozzle on an operating injection molding machine without any modifications, it enhances the quality of molded products, stabilizes quality, and improves profitability through savings on pigments and colorants. 【Features】 ■ Eliminates color variation in molded products ■ Reduces color change and resin change time ■ Shortens molding shot cycle ■ Reduces costs through high concentration of masterbatch ■ Improves dimensional accuracy and quality of molded products ■ Enhances mechanical strength of engineering plastic molded products *For more details, please refer to the PDF materials or feel free to contact us.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Kanazaki Dental Clinic, Matsuyama City, Ehime Prefecture

[Case Study] Kanazaki Dental Clinic, Matsuyama City, Ehime Prefecture

By installing it on the water supply pipe at the outlet of the water tank, all the water in the clinic will be UFB water!

Typically, cleaning is done with acidic water such as hypochlorous acid water, but there were issues with tube degradation and corrosion of metal parts. Unlike a typical facility with only one 20A tube, this project involved an entire building that was a dental clinic, so the nozzle was installed as the water supply pipe at the outlet of the water storage tank. Immediately after water flow, the biofilm in the unit tube was detached, and by using the unit daily, the remaining biofilm gradually decreased, ultimately allowing the unit tube to be returned to a clear state. 【Case Summary】 ■ Issue: Tube degradation and corrosion of metal parts ■ After installation - Supply of ultra-fine bubble water became possible to 8 treatment rooms on the 2nd floor, 5 treatment rooms on the 3rd floor, all floor restrooms, and the disinfection room. - The unit tube was returned to a clear state. - Re-adhesion was hardly observed, maintaining a clean condition. *For more details, please refer to the related links or feel free to contact us.

  • Water treatment equipment
  • Other water treatment equipment
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-pressure spray humidifier "Clean Mist"

High-pressure spray humidifier "Clean Mist"

Effectively humidify indoor spaces! It is effective for preventing influenza infections and addressing dryness during the winter months.

"Clean Mist" is a fine water mist spraying device specialized for indoor humidification, utilizing the capabilities of Eco Mist. By evaporating the finely misted water, it humidifies the indoor environment. It is capable of providing sufficient humidity even in large spaces such as halls, which was previously difficult with just one unit. Please feel free to contact us when you need assistance. 【Features】 ■ Designed specifically for indoor humidification ■ Stepless air volume adjustment ■ Passes leaching performance tests in accordance with water supply regulations (excluding SIH-60S5) ■ Equipped with an ON-OFF control humidity sensor ■ Includes an intermittent operation timer function *For more details, please refer to the PDF materials or feel free to contact us.

  • Humidification device
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Replacement of Spray Nozzle

[Case Study] Replacement of Spray Nozzle

Introduction of a case where the revenue of a beef processing manufacturer increased by approximately 4.06 million yen per day.

Here is a case study of replacing spray nozzles at a beef processing manufacturer. When cooling carcasses, over 200,000 liters of cold water are sprayed for 18 to 20 hours. The conventional system was unable to completely cover the carcasses, resulting in longer cooling times. As a result, the quantity and size of the carcasses decreased, leading to a drop in sales. The nozzles installed in the cooling chamber were changed to ProMax QuickJet nozzles. The cooling time was reduced by half, significantly decreasing water usage, and the carcasses were less prone to shrinkage, improving production volume. [Case Summary (Partial)] ■ Challenges - Longer cooling times led to a decrease in the quantity and size of carcasses. ■ Product Introduced - ProMax QuickJet nozzles *For more details, please refer to the PDF document or feel free to contact us.

  • キャプチャS1-2.PNG
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Comprehensive UFB Supply for Homes and Offices (Whole House Nano Bubble)

[Case Study] Comprehensive UFB Supply for Homes and Offices (Whole House Nano Bubble)

Certified by the Japan Electrical Safety & Environment Technology Laboratory (JET)! Achieved a reduction in water volume and water pressure within 5% through dual technology.

The "UFB Nozzle (13A, 20A, 25A)" is provided for general residential use as a certified water supply nozzle. The minimum operating water pressure for the nozzle is 0.5 kg/cm². With dual technology, it achieves a reduction in water flow and water pressure of within 5%. In launching the water supply UFB, it has been used for over three years in medical settings, particularly in artificial dialysis facilities that require a large amount of water. Based on the consistent performance demonstrated through daily bacterial tests and tests for pyrogenic substances (ET), without any issues such as foaming, we have developed this product. 【Features of the UFB Nozzle】 ■ Certified by the Japan Electrical Safety & Environment Technology Laboratories (JET) ■ Achieves a reduction in water flow and water pressure of within 5% through dual technology ■ Minimum operating water pressure is 0.5 kg/cm² *For more details, please refer to the related links or feel free to contact us.

  • Water treatment equipment
  • Other water treatment equipment
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Blow / Air Cleaning Air Screw Nozzle

Air Blow / Air Cleaning Air Screw Nozzle

No need for water washing! Air blow cleaning removes stubborn dirt and attached dust with just air.

No more water washing is needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unmatched air ejection power. With powerful air blowing, stubborn dirt that has adhered and dust that has settled, as well as dirt that has penetrated scratches, can be removed 'without water.' Additionally, it stands out from other nozzles in its ability to remove not only dirt but also dust and metal shavings (compatible with clean rooms). *In some cases, degreasing or chemical cleaning may be necessary. ■ Advantage 1: Improved productivity and production volume The entire process of water washing, draining, and drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly enhancing productivity and production volume. ■ Advantage 2: Resolution of labor shortages and optimization of personnel allocation Since the series of cleaning and drying processes are no longer necessary, the personnel and human resources previously allocated to these tasks become unnecessary. The freed-up resources can be redirected to departments or tasks within the company that are lacking personnel, thereby optimizing personnel allocation and improving operational efficiency.

  • エアーブローTOP.png
  • エアーブロー事例?.png
  • テスト.gif
  • エアーブロー事例?.png
  • エアーブロー前後比較.gif
  • エアーブローベネフィット.png
  • 導入事例.png
  • hojokin.png
  • CTA.png
  • Other cleaning machines
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Blow / Air Cleaning Air Screw Nozzle

Air Blow / Air Cleaning Air Screw Nozzle

No need for water washing!! Air blow cleaning with just air, from stubborn dirt to attached dust.

No more water washing needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unparalleled air ejection power. With powerful air blow, stubborn dirt that has adhered and dust that has settled, even dirt that has penetrated scratches can be removed 'without water.' Moreover, it stands out from other nozzles in its ability to remove not only dirt but also dust and chips. (Compatible with clean rooms) *In some cases, degreasing or chemical cleaning may be necessary. ■Benefit 1: Improved productivity and production volume The entire process from water washing to water draining to drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly improving productivity and production volume. ■Benefit 2: Resolution of labor shortages and optimization of personnel allocation Since the series of cleaning to drying processes are no longer necessary, the personnel and human resources previously allocated to those tasks are no longer needed. The freed-up resources can be redirected to departments or tasks within the company that are lacking human resources, enabling optimization of personnel allocation and improvement of operational efficiency.

  • エアーブロー事例?.png
  • エアーブロー事例?.png
  • エアーブロー前後比較.gif
  • エアーブローベネフィット.png
  • 導入事例.png
  • 導入可能業界（半導体対応ver）.png
  • hojokin.png
  • CTA.png
  • Other machine elements
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thorough removal of particles with just air and no water - 'Air Screw Nozzle'

Thorough removal of particles with just air and no water - 'Air Screw Nozzle'

Revolutionary! No need for water washing! Particles are removed with just air blow.

<Compatible with Class 100! Can be used for cleaning semiconductors> This air nozzle utilizes a patented unique technology that significantly surpasses the air ejection power of conventional air nozzles. With powerful air blowing, it removes particles adhered to semiconductors. (Compatible with Class 100) In other words, the cleaning process that previously required three steps—1. water washing ⇒ 2. water draining ⇒ 3. drying—has been transformed. It can now be completed in one step using only "air blow" without water. This drastically shortens the process. ■ Benefit 1: Increased productivity and production volume The entire process of water washing, water draining, and drying is replaced by cleaning with air blow only. This means that water washing, water draining, and drying are no longer necessary, leading to a significant improvement in productivity and production volume. ■ Benefit 2: Improved operational efficiency and cost reduction As mentioned above, the elimination of the entire process allows for substantial cost cuts on personnel, various equipment, running costs of those equipment, electricity fees, and other expenses that were previously allocated to that process. ■ Benefit 3: Improved yield With cleaning power that is incomparable to other air nozzles, it contributes to improved yield. This helps enhance production efficiency.

  • thm01.png
  • 01.png
  • 02.png
  • 03.gif
  • 04.png
  • 05.png
  • 06-2.png
  • 07.png
  • Other semiconductor manufacturing equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
360-degree rotating blow nozzle, part number M552BL50N-08L

360-degree rotating blow nozzle, part number M552BL50N-08L

It is an air nozzle that thoroughly blows air in a 360° range due to the rotational motion of the nozzle.

The split air outlets allow for adjustable blowing angles, enabling various blow patterns. The nozzle rotation section comes in two types with diameters of 50mm and 70mm, and you can choose from four sizes of nozzle holes ranging from 0.8mm to 1.8mm. It is ideal for dust blowing and water drainage in the inner surfaces of pipes, inside concave tubes, and grooves.

  • Stainless steel container
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehilar's rotary tank cleaning nozzle (Model number: 500.191)

Rehilar's rotary tank cleaning nozzle (Model number: 500.191)

Lechler foam spray is possible! It can be used in corrosive environments.

The 500.191 series is designed for use in corrosive environments and is compliant with FDA and EC No. 1935/2004. This nozzle is capable of spraying foam. *Lechler GmbH is a German spray nozzle manufacturer.*

  • br_500_191_p_02.jpg
  • nozzle
  • tank
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[INTERMOLD2019 Exhibition] Nozzle "Rectifier"

[INTERMOLD2019 Exhibition] Nozzle "Rectifier"

Sample available! Send the rectifying processing liquid vigorously to the processing point! A high-performance nozzle that is easy to attach!

The "Rectifier" is a high-performance nozzle that vigorously delivers cutting fluid to the machining point. In metal cutting and machining processes, how efficiently the cutting fluid can be applied to the tool and workpiece is one of the important challenges. However, if the cutting fluid discharged from the coolant nozzle remains turbulent, it becomes difficult to reach the machining point. By simply replacing the tip of your coolant hose with the "Rectifier," the powerful and streamlined cutting fluid will effectively capture the workpiece, improving machining efficiency. Samples are currently available. If you are interested, please contact us using the information below. 【Features】 ■ Easy attachment to your existing coolant hose ■ Streamlines turbulent cutting fluid ■ Vigorously delivers fluid to the machining point *For more details, please refer to the PDF document or feel free to contact us. We will be exhibiting at INTERMOLD 2019! Dates: April 17 (Wednesday) to April 20 (Saturday), 2019, 10:00 AM to 5:00 PM Venue: Tokyo Big Sight, Aomi Exhibition Hall Booth Number: A-332 We look forward to your visit!

  • nozzle
  • Other cutting tools
  • Processing Contract
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Energy saving! Reduced electricity costs! Air nozzle 'Hayate Type F'

Energy saving! Reduced electricity costs! Air nozzle 'Hayate Type F'

Good news! For companies that are not making progress in energy conservation and carbon neutrality, we will solve that challenge with "Hayate."

Do you know how much electricity your air nozzle consumes? It is generally said that compressed air accounts for 20-30% of the total energy consumption in a factory. Customers who have used our air nozzle "Hayate Type F" have shared their satisfaction, stating that they have been able to reduce running costs and improve water droplet removal rates. If you are facing issues such as "wanting to remove water droplets and foreign substances," "wanting to reduce noise," or "wanting to cut running costs," we are currently offering free samples for loan. Please contact us for more information. 【Customer Feedback】 ■ Improved water droplet removal rate ■ Reduced printing and inspection defects ■ Reduced running costs, including electricity expenses ■ Recovered initial investment within three months ■ Improved working environment due to reduced noise ■ Installed in a space-saving manner ★ Investment recovery sample materials are also available. *For more details, please refer to the PDF document or feel free to contact us.

  • エア消費量(TypeF).png
  • 風速比較(TypeF).png
  • Other machine elements
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.