We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(20) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

nozzle Product List

121～150 item / All 392 items

Displayed results
2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

Super compact type! A small amount spray fan nozzle with a wide flow adjustment range.

The "Fan-shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide range of flow adjustment ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (fine mist / ultra-compact) SCBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (fine mist / ultra-compact) SCBIMV.S"

Super compact type! A small spray fan-shaped nozzle with an even flow distribution across the entire area.

The "Fan-Shaped Nozzle (Fine Mist / Ultra Compact) SCBIMV.S" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 30μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in an internal mixing air type.) It is a suction type that draws up the liquid and sprays it using the force of compressed air. 【Features】 ○ Uniform spray pattern with consistent flow rate across the entire area ○ Minimum spray flow rate among two fluids ○ Ultra compact design with a total length of approximately 42mm ○ No need for a device for liquid pressurization ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Apply softly to improve coating efficiency! 'Ultrasonic Spray Nozzle'

Apply softly to improve coating efficiency! 'Ultrasonic Spray Nozzle'

Atomize the coating liquid with piezo vibration! Minimal splatter and rebound without pressure! Compatible with a wide range of flow rates.

The Sonia Corporation's "Ultrasonic Spray Nozzle" utilizes piezoelectric vibrations to vibrate liquids. It forms fine particles and sprays them. It can accommodate a wide range of liquid flow rates from 10 mL/min to 100 mL/min, and since it does not apply pressure to the liquid, it features minimal splatter and rebound. There is no waste of the application liquid, and a large booth is not necessary. It is suitable for applications such as coating, humidifying, and disinfecting. 【Features】 - Resistant to clogging and has high operational safety - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and inexpensive running costs - Available in two types: wide spray and narrow spray. ★ We are currently offering a demo unit for you to try out! ★

  • Generator 5 Icon.jpg
  • WS40K50S316.jpg
  • NS130K50S316.jpg
  • Other processing machines
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

Compact type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. The internal mixing design allows for the atomization of liquid by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK.S"

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK.S"

Suction type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Hollow Cone Nozzle (Small Amount Spray) CBIMK.S" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less, featuring an annular spray pattern. It consists of four components: a nozzle tip, core, cap, and adapter, and operates as a suction type that draws liquid using the force of compressed air for spraying. It has a spray angle of 60° and employs internal mixing to atomize the liquid with compressed air inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Suction type that does not require a liquid pressurizing device ○ Annular spray pattern ○ Spray angle of 60° ○ Compact type For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[GX & Energy Saving] Addressing mandated CO2 emissions trading with air nozzles!

[GX & Energy Saving] Addressing mandated CO2 emissions trading with air nozzles!

How about reviewing CO2 emissions with GX and energy-saving initiatives? By simply replacing your current air nozzle with Hayate, you can significantly reduce air consumption!

In order to achieve carbon neutrality by 2050, emissions trading will officially start in Japan from the fiscal year 2026. "Hayate" is an air nozzle that excels in removing water droplets and foreign substances from container surfaces, significantly reduces air consumption, thereby lowering running costs and environmental impact, and also achieves low noise levels. There are proven results in CO2 reduction across various industries using this nozzle. You can try it out with a free rental. Why not take this opportunity to reassess your CO2 emissions? 【Features and Achievements】 - Despite extremely low air usage, it uniquely achieves high wind speed, film-like air, and long-distance air. - Reducing air usage decreases the load on compressors, which can reduce CO2 emissions and electricity costs. - Improved foreign substance removal performance allows for a reduction in the number of air nozzles needed. - There are no moving (wearing) parts in the internal structure, allowing for semi-permanent use. - Excellent removal performance enhances product quality and can reduce factory operating hours. *We are currently offering explanatory materials that include actual measurement data on air consumption and wind speed. Please feel free to contact us for inquiries.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards both ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, using compressed air to draw up and spray the liquid. The two-fluid nozzle consists of four parts: nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Part 2] High cleaning power even at low pressure! 'Rehilar's tank cleaning nozzle'

[Part 2] High cleaning power even at low pressure! 'Rehilar's tank cleaning nozzle'

Recommended for water-saving and energy-saving measures! Complies with hygiene and explosion-proof standards. Materials featuring installation examples available. For the food, beverage, and medical fields.

Our company offers a wide range of "tank cleaning nozzles" manufactured by Lehner, which are essential for the product manufacturing processes in the food, beverage, and medical fields. These nozzles comply with various international standards related to hygiene and explosion protection, including FDA (U.S. Food and Drug Administration), 3A standards, and ATEX directives. Additionally, they possess high impact force even at low pressure, contributing to increased operational efficiency by reducing cleaning liquid usage and shortening cleaning time. Effective cleaning can be achieved. ★ We are currently providing materials that include the standards our products comply with and layout photos! You can read them immediately from the 【PDF Download】. 【Features】 ■ Excellent hygiene and explosion protection, compliant with EHEDG standards and regulation (EC) no. 1935/2004, among others. ■ A lineup of 20 types tailored to various applications, including fixed spray balls and rotating tank cleaning nozzles. ■ Capable of foam spraying. In addition to lending demo units, you can visualize the effects of switching to Lehner tank cleaning nozzles using our advanced software, TankClean, to see what benefits might arise. 2024/10/17 ◆ We have added the long-awaited case studies.

  • Lechler_General-Industry _Tank-Cleaning-Nozzles.jpg
  • D1329_063.jpg
  • D1329_091.jpg
  • D1329_067.jpg
  • nozzle
  • Food Cleaning Equipment
  • Other cleaning machines
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sonosys Ultrasonic Spray Nozzle

Sonosys Ultrasonic Spray Nozzle

A collaborative product of Rehila's nozzle technology and Sonosys's ultrasonic technology.

Particles (droplets) formed by the ultrasonic spray nozzle are broken up by the vibrations of the piezo element. In other words, unlike pressurized systems, the particles do not have speed. As a result, they either fall naturally or float due to the influence of the wind. Therefore, carrier air is used to transport the formed particles for application.

  • Zerstaueber-small-01-webeite.png
  • Zerstäuber-Generator mit Lüfter.jpg
  • nozzle
  • Coating Machine
  • Ultrasonic Oscillator
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cutting torch and surrounding equipment (torch cutting machine)

Cutting torch and surrounding equipment (torch cutting machine)

Trustworthy German quality, to the world! The cutting torches and peripheral equipment inherited from the former GEGA LOTZ company are world-class!

We provide products inherited from a long-established prestigious manufacturer of burners (gas cutters) for continuous casting equipment. EL Trading is working day and night to ensure that your cutting burners and systems are comfortable to use. We offer a variety of products for torch cutting, scarfing, and debarking. The cutting nozzles of the OCL and OCH series achieve long life, high-speed cutting, and narrow cutting widths, accommodating various applications regardless of cold or hot conditions. The torches of the OCT and OCC series are designed for flame cutting machines and can cut various steel types when combined with OCL and OCH nozzles. The newly developed nozzle holder improves sealing and durability, achieving a long lifespan. Gas control equipment such as the LC and LE controllers provide precise operating pressure adjustment and long life. The manual torches of the OCA and OCS series are ideal for emergency cutting operations in continuous casting equipment, featuring a lightweight and robust design for long-term use. Additionally, we handle manual scarfing devices and consumables to meet customer needs. We also offer consulting services for cutting improvements and more.

  • Nozzle OCL 10.png
  • Nozzle OCH 35.png
  • Torch 2.png
  • Torch 3.jpg
  • regulator for oxygen.png
  • regulators for gas.png
  • Safety device.png
  • cooling jacket for pinch valve.png
  • Casting Machine
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
8-channel nozzle for ELISA washing using gravity drop method for cleaning solution - Immuno Nozzle 8

8-channel nozzle for ELISA washing using gravity drop method for cleaning solution - Immuno Nozzle 8

Cleaning PEEK nozzle for 8-channel ELISA plates. Liquid dispensing and stopping can be done with a single thumb action. Videos are currently being streamed on our company website!

This is a new product for microplate washing with an 8-channel nozzle that improves the shortcomings of the previously difficult-to-use ImmunoWash8. It features a grip design for easy handling, and liquid stopping is a one-touch operation with just a push of the thumb. It allows for the delivery of washing solution to the plate using only gravity from a height of 30 cm. We offer two types: one for high flow using gravity (a competitor to ImmunoWash8) and another for high-speed using a pump. The gravity discharge Immuno Nozzle 8Z can accommodate pipette tips, eliminating concerns about contamination. It provides fast liquid discharge even with a height difference of 30 cm. The high-speed nozzle is made of PEEK and has an outer diameter of 1.6 mm, making it ideal for cleaning difficult-to-wash magnetic beads. Using an optional pump and valve bottle set makes microplate washing even easier. It is highly recommended for the cleaning of complex and precision-demanding ELISA reactions. Each of the 8-channel nozzles is removable and can be swapped with plugs to accommodate 24-well plates, 6-well plates (4-channel, 2-channel), and other plates. Additionally, all parts are screw-type and can be easily detached, making nozzle cleaning simple. Measures against clogging are also thoroughly addressed.

  • Other cleaning machines
  • Plastic utensils and containers
  • Other physicochemical equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sonaer ultrasonic spray nozzle manufactured by Sonia Corporation

Sonaer ultrasonic spray nozzle manufactured by Sonia Corporation

Spraying fine particles without pressure! Atomization through the vibration of piezoelectric ceramics!! Low power consumption and low energy costs!!

Ultrasonic waves generated by piezoelectric ceramics are transmitted to the spray nozzle (atomizer), where they vibrate the liquid film to create extremely fine particles for spraying. Liquid can be supplied and sprayed into fine particles without the need for pressurization. The flow rate varies depending on the model, but it can accommodate a wide range from a minimum flow rate of 10 ml/min to a maximum of 100 ml/min. Since pressure is not applied to the liquid, there is very little splatter or rebound, eliminating waste of the applied liquid. Additionally, there is no need for a large painting booth. This achieves a reduction in capital investment and running costs. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia Corporation.

  • valve
  • Ultrasonic Oscillator
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
We will be exhibiting at the 2023 Osaka Machine Processing System Exhibition!

We will be exhibiting at the 2023 Osaka Machine Processing System Exhibition!

We will be showcasing steel coolant nozzles, Micromag, coolant savers, and more! 【Demonstrations available!】

Our company will be exhibiting at the "2023 Osaka Machine Processing System Exhibition" held at Intex Osaka, Hall 5 A and B, from February 16 (Thursday) to 17 (Friday), 2023. To prevent the spread of the novel coronavirus, we will comply with the exhibition guidelines in collaboration with the organizing committee and will create an environment that ensures safety and security for the event. We will mainly showcase deburring and coolant filtration systems. We understand that you are busy, but we kindly ask for your visit.

  • Other machine tools
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Flounder Farming in Jeju Island, South Korea (1200L/min OK Nozzle)

[Case Study] Flounder Farming in Jeju Island, South Korea (1200L/min OK Nozzle)

Using the "1200L/min OK nozzle"! It is expected to cover an area of about 8,000 to 10,000 m2 of water surface.

At the Jeju flounder breeding farm "Sangji Fisheries," an oxygen dissolution system using the "large nozzle MB1,200" has been introduced. The total water surface area of the farm is approximately 25,000 m2. One "MB1,200L nozzle" is expected to cover an area of about 8,000 to 10,000 m2. [Case Overview] ■ Jeju flounder breeding farm "Sangji Fisheries" - The total water surface area of the farm is approximately 25,000 m2 - One "MB1,200L nozzle" is expected to cover an area of about 8,000 to 10,000 m2 *For more detailed information about the case, please refer to the related link. For further inquiries, feel free to contact us.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-density semiconductor dispenser nozzle "Pinpoint Nozzle"

High-density semiconductor dispenser nozzle "Pinpoint Nozzle"

This is a cutting-edge dispenser nozzle utilizing micro-drilling technology, thin-walled processing technology, and precision machining technology.

A high-precision dispensing nozzle specifically designed for "narrower" and "deeper" pinpoint applications in high-density semiconductors with densely arranged parts. This is the most advanced dispenser nozzle created by Tekudai, set to launch in the fall of 2024. ◆ An ultra-fine tip with a thickness of 0.02mm, optimal for "narrower" points Utilizing advanced thin-wall processing technology, the difference between inner and outer diameters is controlled to the extreme (thickness of 0.02mm). It can reach into the narrow gaps of high-density semiconductors. ◆ A 2mm long tip that reaches "deeper" points The length of the nozzle tip has been doubled from the conventional 1mm to 2mm. This allows for precise dispensing at deep points, such as between components. Additionally, our unique integrated processing achieves high-precision dispensing, unlike the press-fit method.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heater-equipped long extension nozzle

Heater-equipped long extension nozzle

Two types are available depending on the length of the heater! It is equipped with a contact bush.

Here is an introduction to our "Heater-equipped Long Extension Nozzle." This product features a heater attached to the extension nozzle. It is equipped with a contact bush and has a valve-less mechanism. There are two types, Type A and Type B, depending on the length of the heater, and the manifold specifications are the same as standard. 【Type A Specifications】 (L dimensions: tolerances) ■40mm: -0.02/-0.04 ■45mm: -0.02/-0.04 ■50mm: -0.02/-0.04 *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Use of Nanobubbles in Irrigation Cultivation of Mini Tomatoes

[Case Study] Use of Nanobubbles in Irrigation Cultivation of Mini Tomatoes

Mini tomatoes thrive with nanobubbles! Depending on the variety, there are cases where the harvest increased by 5% to 35%.

Here is a case study from Kumamoto Prefecture using nanobubbles in the irrigation cultivation of mini tomatoes. In 2014, simply incorporating the "200L/min OK nozzle" into the existing pipeline resulted in an increase in harvest of 5% to 35%, depending on the variety. In 2015, by adding 10% oxygen and using the OK nozzle with pig manure, organic fertilizer was produced, leading to a 46% increase in harvest. 【Case Summary】 <2014> ■ Just incorporating the 200L/min OK nozzle into the existing pipeline ■ Harvest increase of 5% to 35% depending on the variety ■ Use of well water ■ Irrigation volume approximately 150% ■ Liquid fertilizer without solidification ■ Increased fertilizer amount ■ Irrigation tubes are cleaned *For detailed information about the case, please refer to the related links. For more information, feel free to contact us.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MIG torch gas nozzle

MIG torch gas nozzle

Introduction of the gas nozzle for MIG torches handled by Yamaki!

The "Gas Nozzle for MIG Torch" is a MIG welding-related product handled by Yamaki. We offer the "WPAN-200" and "WPAWN-400" with an inner diameter of 13φ. Our company also accepts the production and customization of machines tailored to our customers' needs, as well as machine repairs. Since we manufacture parts and products in-house, we can keep the prices of parts and products low, leading to cost reductions for our users. 【Specifications】 ■WPAN-200 ・Inner diameter φ: 13 ・Compatibility: YWP WPMA-200, DAIHEN WTA-200 ■WPAWN-400 ・Inner diameter φ: 15 ・Compatibility: YWP WPMAW-400, DAIHEN WTAW-400 *For more details, please refer to the PDF document or feel free to contact us.

  • Welding Machine
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Defoaming nozzle "FN120CWA, FN120CWS"

Defoaming nozzle "FN120CWA, FN120CWS"

Instantly eliminate clogs with the defoaming nozzle! Available in two types: stainless steel resistant to rust and ABS resin!

At Niikura Industrial Co., Ltd., we have been continuously developing various spray nozzles using our own technology for over 50 years. We carry out standardization, thoroughly manage manufacturing and quality control, maintain a constant stock of standard products (SUS304, ABS resin), and are equipped for immediate delivery. We offer two types of products: one made of ABS resin and the other made of stainless steel. 【Features】 ○ Immediate clogging resolution ○ Significant weight reduction ○ Rust-resistant ○ 10,000 movable tests conducted For more details, please contact us or download the catalog.

  • nozzle
  • spray
  • Piping parts
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Rotary Hole Cleaning Nozzle, Air Only, Part Number M735NBH-50G

Air Rotary Hole Cleaning Nozzle, Air Only, Part Number M735NBH-50G

High-speed rotating nozzle for bottle cleaning. This product cleans the dirt inside the bottle and drains the water after cleaning.

The nozzle, which is long and pipe-shaped, rotates at high speed while spraying air or mist-like cleaning solution from its tip. Compared to conventional nozzles that spray in one direction, it reduces the amount of cleaning solution used to about 1/2 to 1/3. The standard products come in four different lengths, with types available that spray only air and types that spray air/mist.

  • Stainless steel container
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Backpack Sprayer GB-500B

Backpack Sprayer GB-500B

Easy spraying anywhere!

This is a backpack-type sprayer weighing approximately 7 kg. It has wheels, so you can use it for long periods by pulling it along, and you can also carry it on your back when working on stairs or at heights. The spraying liquid must be non-viscous. To extend the machine's lifespan, we ask that you take a short interval (break) when the liquid runs out.

  • Company：Giebel
  • Price：100,000 yen-500,000 yen
  • spray
  • Other environmental equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Full Cone Nozzle 'Wide Angle Uniform Distribution Nozzle (Wide Spray Angle) BBXP'

Full Cone Nozzle 'Wide Angle Uniform Distribution Nozzle (Wide Spray Angle) BBXP'

Clog-resistant! Uniform and wide-angle circular spray pattern conical nozzle.

The "Wide Angle Uniform Distribution Nozzle (Wide Spray Angle Type) BBXP" is a conical nozzle with a circular spray pattern and uniform flow distribution. With a spray angle of 120°, it can cover a wider area than any other nozzle. It consists of two parts: the nozzle body and an X-shaped wobbler, forming an integrated nozzle with the wobbler press-fitted into the body. The use of an X-shaped wobbler in the rotating element allows for a larger foreign object passage diameter, making it less prone to clogging. It is available in small to medium flow rates. 【Features】 ○ Circular spray pattern with uniform and wide flow distribution ○ Structure with a large foreign object passage diameter that is less prone to clogging ○ Wide spray angle of 120° covering a broad area ○ Integrated nozzle with the wobbler press-fitted into the body ○ Available in small to medium flow rates For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Processed Parts Performance] Ejector Nozzle

[Processed Parts Performance] Ejector Nozzle

Introduction of achievements in wire cutting and electrical discharge machining parts! From one piece of various types and small quantities! We will provide a quote for processed parts in as little as half a day.

Agency Assist has a track record in processing for prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our wire cut/discharge machined part, the "Ejection Nozzle." 【Features】 -------------------------------------------------------------- Part Name: Ejection Nozzle Material: Stainless Steel (SUS316) Processing Method: Wire Cut/Discharge Machining Size: φ42mm × L150mm Notes: Fine hole 0.6mm Application: Ejection nozzle for nitrogen trifluoride -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts in as little as half a day. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. From metals to resins, trust us with your cutting processing needs for prototype and development parts. ☆ Please feel free to contact us for a preliminary estimate! ☆

  • Processing Contract
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehilar Corporation rotary tank cleaning nozzle (Model number: 500.234)

Rehilar Corporation rotary tank cleaning nozzle (Model number: 500.234)

Lechler: The world's smallest nozzle! Its compact design allows for cleaning in tight spaces.

The 500.234 series is a full stainless steel rotating nozzle equipped with slide bearings. Its very compact design allows for use in tight spaces. *Lechler GmbH is a German spray nozzle manufacturer.

  • nozzle
  • Water Hydraulic Equipment
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "65SUS Type"

Nozzle "65SUS Type"

Low pressure loss! Low cost! Lightweight! Energy-saving hybrid blow nozzle SUS.

The "65SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinsing tank (finishing tank) incorporated into the cleaning device. The slit width can be easily adjusted, and if there is any disturbance in the air velocity, adjusting the slit width can resolve the issue on the spot. Additionally, all models come with fixed brackets (material USU), allowing for options of top, bottom, or side mounting by using the fixed brackets. It is mainly used for drying after water drainage of printed circuit boards and after cleaning bolts and nuts. 【Features】 ■ Made of stainless steel ■ Achieves high air velocity with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Water-Saving Nozzle Bubble90

Super Water-Saving Nozzle Bubble90

Maximum water-saving rate of 95%! Equipped with a clog prevention flush function, no maintenance required.

◆2009 "Super Monozukuri Parts Grand Prize" Award Winner◆ "Bubble90" is a faucet nozzle that vibrates and releases aerated water, which efficiently incorporates air into tap water under high pressure. By simply installing it on a faucet, it changes the amount of bubbles released from regular tap water and rhythmically strikes the bubbles to effectively remove dirt from the items being cleaned! 【Features】 ○ Immediate effect! Achieves a 95% water-saving rate ○ Easy installation with no hassle! Maintenance-free structure ○ Instant adjustment of water pressure to suit your preference ○ Patent obtained 【Case Studies (Partial Introduction)】 ○ Supermarket Backroom Water bill: Before installation 4.3 million yen/year → After installation 3.6 million yen/year ○ Izakaya Chain Water bill: Before installation 2 million yen/year → After installation 1.5 million yen/year For more details, please download the catalog or contact us.

  • nozzle
  • Water treatment equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat Stroke Prevention Product Series 2024

Heat Stroke Prevention Product Series 2024

To safely and comfortably get through the extreme heat! Please make use of this in addition to your air conditioning equipment.

We would like to introduce our "Heat Stroke Prevention Product Series 2024" that we handle. Our lineup includes a variety of products such as the heat prevention band "I-BOW," which searches for deep body temperature with two sensors, and the "Heat Alarm," which notifies users with different warning alarms at four levels: Attention, Caution, Severe Caution, and Danger. Please make use of our cooling equipment in addition to ensure proper heat dissipation and health management. 【Lineup (Excerpt)】 ■ Heat Prevention Band I-BOW ■ Heat Emergency Bag II ■ Heat Alarm ■ BurTLE: Aircraft AC Vest, Blouson, etc. ■ New Suzushin Hat *For more details, please refer to the related links or feel free to contact us.

  • Other safety and hygiene products
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Spray Nozzle】 Ultra Wide Angle Circular Full Coverage Type EX2-W TYPE

【Spray Nozzle】 Ultra Wide Angle Circular Full Coverage Type EX2-W TYPE

For cooling, cleaning, and surface treatment of steel materials, steel plates, etc.! It sprays water over a super wide-angle circular area at 120° with a pressure of 0.2 MPa.

This product is a spray nozzle that waters over a super wide-angle circular area thanks to our patented internal blades. It waters over a super wide-angle circular area of 120° at 0.2MPa. The angle becomes narrower in high-pressure ranges. We offer a variety of options from low flow to high flow. 【Features】 ■ Waters uniformly over the entire area ■ Waters over a super wide-angle circular area of 120° at 0.2MPa ■ Various options available from low flow to high flow *For more details, please refer to the PDF document or feel free to contact us.

  • image_04.png
  • nozzle
  • Spray tower
  • Piping parts
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.