Pin 0.5x2
Pin 0.5 millimeter
Order number: TF-00087 Screw diameter: 0.5 mm Neck length: 2 mm Aluminum pin 0.5x2
- Company：松本産業株式会社（ネジの松本産業） 岡発戸工場
- Price：Less than 10,000 yen
pin(0.5) - List of Manufacturers, Suppliers, Companies and Products
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
pin Product List
1～15 item / All 25 items
Displayed results
0.05mm electrode pin
0.05mm electrode pin
Product Description: This is an electrode pin with a tip of 0.05mm. For comparison, a 0.5mm mechanical pencil lead is included in the photo. The material is C1100 (copper) and it is manufactured using a Swiss-type automatic lathe. To achieve a flat tip, end face cutting has also been performed, resulting in a high-quality finish.
- Company：由紀精密
- Price：Other
Drift Pin MDP
A lineup of products for various uses! We offer four different sizes.
The "Drift Pin MDP" offers a lineup of products for various applications, including 90mm width materials, 105mm decorative materials, and 120mm decorative materials. There are four sizes available: φ12×85, φ12×95, φ12×103, and φ12×118. The material used is "JIS G 3505 SWRM 8." 【Features】 ■ Material: JIS G 3505 SWRM 8 ■ Surface treatment: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.
- Company：高尾
- Price：Other
Tungsten carbide round pin processing, tungsten carbide core pins, tungsten carbide punch pins
We specialize in processing various types of superhard pins, particularly in delicate machining such as ultra-fine processing.
We perform precision machining of carbide pins. For core pins, guide pins, and stepped pins used for positioning that require high precision, we utilize the properties of carbide to achieve a wire diameter tolerance of +/- 0.05um. Please contact us if you need precision machining of round pins.
- Company：タカインターナショナル
- Price：Unset
Super hard alloy micron pin (small diameter pin)
Outer diameter φ0.05mm to φ0.10mm! This is a micron pin (small diameter pin) made of carbide alloy using centerless processing.
We would like to introduce the ultra-hard alloy micron pins (small diameter pins) manufactured by Sanwa Creation Co., Ltd. These are ultra-fine pins with an outer diameter of less than φ0.1mm, produced using centerless grinding, and made from ultra-hard alloy and zirconia ceramics. They have a proven track record as electrodes for discharge machining nozzle holes in diesel engine fuel injection systems and as punches for ink nozzle orifices in inkjet printers. 【Specifications】 ■ Material: Ultra-hard alloy, zirconia ceramics ■ Dimensional standards ・ Outer diameter (φD): φ0.05mm to φ0.10mm ・ Total length (L): up to 350mm *For more details, please refer to the related links or feel free to contact us.
- Company：SANWA CREATION Co.,Ltd.
- Price：Other
Gas release pin "Gastose"
Attention those struggling with gas burn and short circuit issues! Introducing the gas release pin.
"Gastose" is a gas venting pin equipped with gas vent (air vent) functions such as ejector pins and core pins. It features a gradient processing that efficiently discharges gas generated within the mold. Depending on the fluidity of the resin, gas vents with widths ranging from 0.005 to 0.05 mm can be incorporated, making it compatible with various resins. 【Benefits of Introducing Gastose】 ■ Enables low-pressure molding, resulting in smaller burrs ■ Reduces the likelihood of gas vent clogging in the cavity, preventing short shots ■ Helps prevent gas burn on products and reduces sink marks ■ Decreases inspection labor hours due to lower defect rates ■ Prevents damage to core pins *For more details, please refer to the PDF document or feel free to contact us.
- Company：プラモール精工
- Price：Other
![[Processed Parts Results] Pin](https://image.mono.ipros.com/public/product/image/ab1/2001111087/IPROS5474021497462824922.jpg?w=280&h=280)
[Processed Parts Results] Pin
Shortest half-day estimate / Introduction of lathe-processed parts! From one piece of various types and small quantities! We will provide an estimate for processed parts in as little as half a day.
Agency Assist has a track record in processing for prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our lathe-processed component, the "Pin." 【Features】 -------------------------------------------------------------- Part Name: Pin Material: Aluminum (A5052) Processing Method: Lathe Processing Size: φ16×37 Surface Treatment: White Anodizing -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts in as little as half a day. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. We can process materials from metals to resins! Trust us with your prototype and development component machining. ☆ Please feel free to contact us for a comparative estimate first! ☆
- Company： エージェンシーアシスト 京都本社 営業所(仙台・東京・埼玉・神奈川・浜松・愛知・岐阜・新潟・福井・奈良・兵庫・岡山・福岡)
- Price：Other
Super hard alloy needle pins (small diameter pins) used for operation pins and probe pins!
We are using it with operation pins and probe pins for electron microscopes! It is a carbide needle pin (small diameter pin)!
We would like to introduce the carbide alloy needle pins/small diameter pins handled by Sanwa Creation Co., Ltd. These are used as operating pins for micromanipulators in applications such as "fine foreign object retrieval" and "sampling specific areas in material analysis." Additionally, our needle pins have been used in the field of material development to simulate damage for the purpose of investigating the durability of materials. We also accept requests for the production of probe pins. The material is carbide alloy. The dimensional standards are tip widths (t) of 0.001mm or less, 0.003mm or less, and 0.005mm or less. 【Specifications】 ■ Material: Carbide alloy ■ Dimensional standards ・ Tip width (t): 0.001mm or less, 0.003mm or less, 0.005mm or less *For more details, please refer to the related links or feel free to contact us.
- Company：SANWA CREATION Co.,Ltd.
- Price：Other
SKH51 Straight Ejector Pin
SKH51 Straight Ejector Pin
EHP has a tolerance of 0/-0.005 for the shafts used as products, and the total length is prepared at 50 mm intervals. EHPT is a custom-made product that allows for changes to the size and total length of the shafts of the above EHP to meet the customer's desired specifications. EH has a tolerance of -0.01/-0.02 for the shafts used as products, and the total length is prepared at 50 mm intervals. EHT is a custom-made product that allows for changes to the size and total length of the shafts of the above EH to meet the customer's desired specifications.
- Company：CHAMPION CORPORATION
- Price：Other
Gas venting pin "Gas Tose" in injection molding molds.
A groundbreaking gas vent pin for plastic injection molding! Contributes to cost reduction by lowering defect rates!
Gastose was born from the need to address pinhole issues in connectors from injection molding molds. With the goal of "all products being good from the mold," it is a gas vent pin that was developed through a review of mold structure, design, prototyping, mass production, and continuous improvement activities on-site. Depending on the fluidity of the product material, gas vents with widths ranging from 0.005 to 0.05 can be incorporated, making it compatible with any type of resin. **Benefits of Introducing Gastose** - Improved quality (reduction in defect rates leading to lower costs) - Enables low-pressure molding, resulting in smaller burrs. - Prevents gas burn on products and reduces sink marks. - Prevents damage to core pins (reducing maintenance labor). - Reduces purging and waste shots (saving material costs). - Eliminates factors causing chocolate stops (stopping continuous molding). - Keeps molds clean and reduces maintenance frequency. *For more details, please request materials or view the PDF data available for download.*
- Company：プラモール精工
- Price：Other
![[Processed Parts Performance] Hinge Pin](https://image.mono.ipros.com/public/product/image/707/2001065975/IPROS7958132756414977351.jpg?w=280&h=280)
[Processed Parts Performance] Hinge Pin
Shortest half-day estimate / Introduction of achievements in lathe-processed parts! From one piece of various types in small quantities! We will provide an estimate for processed parts in the shortest half-day.
Agency Assist has a proven track record in the prototyping and development sectors across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our lathe-processed component, the "Hinge Pin." 【Features】 -------------------------------------------------------------- Part Name: Hinge Pin Material: Stainless Steel (SUS303D) Processing Method: Lathe Processing Size: φ12mm × 30mm Surface Treatment: None -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts within half a day at the shortest. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. From metals to resins, trust us with your cutting processing needs for prototyping and development parts. ☆ Please feel free to contact us for a preliminary estimate! ☆
- Company： エージェンシーアシスト 京都本社 営業所(仙台・東京・埼玉・神奈川・浜松・愛知・岐阜・新潟・福井・奈良・兵庫・岡山・福岡)
- Price：Other
![[Processed Parts Results] Press-fit Pins](https://image.mono.ipros.com/public/product/image/978/2001065881/IPROS10863859805869984497.jpg?w=280&h=280)
[Processed Parts Results] Press-fit Pins
Shortest half-day estimate / Introduction of achievements in lathe-processed parts! From one piece of various types and small quantities! We will provide an estimate for processed parts in as little as half a day.
Agency Assist has a proven track record in processing for prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our lathe-processed component, the "Press Fit Pin." 【Features】 -------------------------------------------------------------- Component Name: Press Fit Pin Material: Stainless Steel (SUS303D) Processing Method: Lathe Processing Size: φ16mm × 23.5mm Surface Treatment: None -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts within half a day at the shortest. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. From metals to resins, leave your cutting processing for prototype and development parts to us. ☆ Please feel free to contact us for a preliminary estimate! ☆
- Company： エージェンシーアシスト 京都本社 営業所(仙台・東京・埼玉・神奈川・浜松・愛知・岐阜・新潟・福井・奈良・兵庫・岡山・福岡)
- Price：Other
![[Processed Parts Results] Pin](https://image.mono.ipros.com/public/product/image/588/2001084565/IPROS7658866643753359503.jpg?w=280&h=280)
[Processed Parts Results] Pin
Shortest half-day estimate / Introduction of achievements in lathe-processed parts! From one piece of various types and small quantities! We will provide an estimate for processed parts in as little as half a day.
Agency Assist has a proven track record in processing for prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our lathe-processed part "Pin φ16." 【Features】 -------------------------------------------------------------- Part Name: Pin Material: Stainless Steel (SUS303) Processing Method: Lathe Processing Size: φ15mm × 36.4mm Surface Treatment: None -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts in as little as half a day. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. We can handle everything from metals to resins! Trust us with your cutting processing for prototype and development parts. ☆ Please feel free to contact us for a preliminary estimate! ☆
- Company： エージェンシーアシスト 京都本社 営業所(仙台・東京・埼玉・神奈川・浜松・愛知・岐阜・新潟・福井・奈良・兵庫・岡山・福岡)
- Price：Other
Bending process SUS303 Φ1.4 groove cutting pin
The SUS round bar that has been grooved is bent and cleaned of contaminants using ultrasonic cleaning.
The material is stainless steel wire, SUS303 round bar (Φ1.4). It is grooved to a width of 0.4 x 0.1 mm (indicated by the arrow), and after forming processing, it will be cleaned with ultrasonic cleaning to remove contaminants before shipment. Our company offers forming processing and bending of round bars. Please feel free to consult us if you have any concerns. Tsuruga Spring Co., Ltd. for springs and springs Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web meetings.
- Company：鶴岡発條
- Price：Other
