Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
616～630 item / All 659 items
Wide frequency band: 10Hz to 11GHz electric field probe
• Frequency range: 10KHz-11GHz • Laser power supply - no charging required • Extremely small size • High resolution, high speed, low noise • Electric field strength 0.1V/m-10kV/m • Wide dynamic range • Continuous real-time data streaming • PC computer interface & software included
High-performance high-frequency isotropic electric field probe capable of measuring up to 90GHz!
【Features】 - High sensitivity - Isotropic & effective value measurement - Excellent attenuation - Compliance with international standards
The withstand voltage is 100V, and the frequency range is DC to 40GHz! Probe repair and replacement of the tip are possible.
We would like to introduce our RF_MEMS probe, the 'TP40-Angle Series.' The tip parallelism is less than 5um, and the probe mark size (width) is less than 30um, with a characteristic impedance of 50ohm. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe scars ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
Selectable probe pitch from 50 to 1,000 um! The insertion loss (typ. GSG-150 um pitch) is -0.6 dB.
We would like to introduce our RF_MEMS probe, the 'TP40-Vertical Series'. The connector is 2.92mm/F (K/F), and the probe configurations are GS, SG, and GSG, with a contact lifespan (when using an auto-prober) of 1 million cycles. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 um ■ Probe repair and tip chip replacement available (Note that repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
The connector is 2.4mm/F! It features a low-loss, low-reflection air coplanar probe design.
We would like to introduce our RF_MEMS probe, the 'TP50-Angle Series.' The frequency range is DC to 50GHz, with an insertion loss (GSG-150um pitch typ.) of -0.6dB, and the characteristic impedance is 50 ohms. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
The frequency range is DC to 50GHz! Probe pitch can be selected from 50 to 1,000μm.
We would like to introduce our RF_MEMS probe, the "TP50-Vertical Series." The characteristic impedance is 50 ohms, and the insertion loss (GSG-150um pitch typ.) is -0.6dB. Additionally, the connector is compatible with 2.4mm/F, and the applicable pitch ranges from 50 to 1000um. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Available probe pitch options from 50 to 1,000um ■ Probe repair and tip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
Insertion loss (GSG-150um pitch typ.) is -0.8dB! Probe pitch can be selected from 50 to 1,000um.
We would like to introduce our RF_MEMS probe, the 'TP67-Angle Series'. The connector is 1.85mm/F (V/F), with a compatible pitch range of 50 to 1000um, and the needle position accuracy is within 10um. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Available in probe pitches of 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
Selectable probe pitch from 50 to 1,000 µm! Introducing products with a frequency range of DC to 40 GHz.
We would like to introduce our RF_MEMS probe, the 'TPD40-Angle Series.' The characteristic impedance is 50 ohms, and the contact resistance (to gold pads) is 0.05 ohms, featuring a low-loss, low-reflection air coplanar probe design. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low-loss, low-reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 μm ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
Insertion loss (GSGSG-150um pitch typ.) is -0.8dB! Probe repair and tip chip replacement are possible.
We would like to introduce our RF_MEMS probe, the 'TPD40-Vertical Series'. The frequency range is DC to 40GHz, with a characteristic impedance of 50 ohms. The connector is 2.92mm/F (K/F), and the probe configuration is GSSG or GSGSG. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
Crosstalk (typ. GSGSG-150um pitch) is -35.0dB! Introducing products with a frequency range of DC to 50GHz.
We would like to introduce our RF_MEMS probe, the 'TPD50-Vertical Series.' The connector is 2.4mm/F, and it supports pitches from 50 to 1000um, featuring a low-loss, low-reflection air coplanar probe design. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low-loss, low-reflection air coplanar probe design ■ Small probe footprint ■ Available in probe pitches of 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
The connector is 1.85mm/F (V/F)! It features a low-loss, low-reflection air coplanar probe design.
We would like to introduce our RF_MEMS probe, the 'TPD67-Angle Series.' The crosstalk (GSGSG-150um pitch typ.) is -35.0dB, the characteristic impedance is 50 ohms, and the frequency range is DC to 67GHz. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.
Compatible with high temperatures up to 300°C. Minimum pitch of 0.35mm or more.
Compatible with high temperatures up to 300°C. Minimum pitch of 0.35mm or more.
For those looking for an alternative of equivalent quality to the Olympus OMCL series, which has been discontinued! This is the most versatile AFM probe/cantilever.
The product is a compatible item for the discontinued Olympus OMCL-AC240TM. Therefore, it can be used just like the conventional Olympus AFM probes. <Features of SPM-AC240S-AP> 1. Platinum-coated probe for precise electrical property evaluation This cantilever is ideal for electrical property evaluations such as EFM, KFM, and SCM. The probe side is coated with platinum, providing stable conductivity. 2. Sharpness and conductivity combined The design with low resistance achieves high conductivity. Additionally, by finishing the probe tip to a sharp point, it enables high-resolution observation of the fine structures on the sample surface and highly sensitive measurements of electrical properties.
AC current probe with frequency characteristics supporting up to 50MHz.
The "CWT Mini50HF" is a Rogowski coil-type current probe with a frequency response of 50MHz (-3dB). Its tip is detachable, making it easy to wrap around conductors, and it is made of a soft, thin, and easily bendable material, making it very user-friendly. Just because it is easy to use does not mean it has poor performance; it can accurately monitor fast current waveforms, sine waves, quasi-sine waves, and pulse waveforms. It is battery-operated for easy handling, but it can also be powered by an AC adapter. Please feel free to contact us.
Introduction to Theoretical Analysis of Wire Probe Wear
I worked for six years as a director and executive officer at a manufacturer of wire probes, promoting the research and development of inspection jigs. While operating independently as "Process D&T Lab," I have conducted original research and development on durability issues and plastic deformation of wire probes. Regarding durability, I found that the durability deteriorates more in powered tests than in non-powered tests, and I investigated the cause of this fact. As a result, I believe I have nearly identified the cause of power degradation. From this result, a new design policy for probes has been established. I am considering providing this analysis method. Website: https://www.process-d-and-t-lab.com/ Please refer to "Design & Tools."
