Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
6631～6645 item / All 6921 items
No post-processing of water or oil is required compared to other vacuum pumps (such as water-sealed or oil rotary types).
It has a very strong and sturdy structure, so it is not a problem if the gas being sucked in contains some resin or water.
For extending the lifespan of bearings! It's okay even with waste oil spraying or slurry-mixed coolant.
The internal gear pump is a pump that operates with an outer gear and an inner gear meshing together, rotating along a trochoidal curve. This pump, specialized for fuel oil, uses three special PTFE (Teflon) seals to isolate the bearings from the oil. This reduces bearing wear and allows for a long lifespan even when discharging waste oil. 【Features】 ● Prolonged bearing lifespan → By using special PTFE (Teflon) seals, the bearings are isolated from the liquid. This minimizes uneven wear on the bearings, allowing for a long lifespan even in coolant stations where slurry from waste oil spraying is mixed in. ● Suitable for high-temperature use → This model can withstand temperatures up to 150°C. If you require higher temperatures, please contact us. ◎ Download the catalog → You can view the specifications of all 11 models. Additionally, we also offer internal gear pumps for chemical raw materials. You can find more details by downloading the same catalog.
It is ideal for sampling asbestos and organic solvents. The flow rate range is from 800cc to 5L/min. It covers a wide range with one unit.
This is a compact pump that is ideal for sampling substances such as asbestos and organic solvents. The flow rate range is from 800cc to 5L/min, allowing it to cover a wide range with just one unit. Additionally, with optional parts, it is also possible to perform low-flow sampling at 5CC/min. The body is made of reinforced plastic, making it durable. It can operate even under high back pressure. Furthermore, there are models available that can be equipped with a gas back on the pump outlet side. The pump comes standard with a nickel-hydrogen battery, a battery charger (AC100V), a ruler hose adapter, a clip for shirts, and vinyl hoses. With its wide flow rate range, one unit can cover the capacity of two or three units from other manufacturers.
We handle dust, mist, and other substances generated from various factory processes.
1. Collects particles of 1.12 microns or larger with over 90% efficiency (FMC type) ● The shape of the cyclone element is ideally determined based on years of experience. The length of the exhaust duct is the same, and there is an orifice at the bottom of the exhaust duct. ● Aerodynamically designed guide vanes. 2. Stainless steel guide vanes ● The guide vanes are the lifeblood of the multi-cyclone, so they are attached. Stainless steel is used considering wear resistance. 3. No dust accumulation area ● A funnel has been installed to eliminate flat areas between cyclone elements. 4. Can incorporate an air jet cleaning device ● Automatic cleaning is performed during operation by a sequence controller. For more detailed information, please feel free to contact us using the inquiry section below.
It is a standard model grease pump for pails that is highly active at all maintenance locations!
The Power Lube P3-01JL has a mechanism that allows grease to be discharged through the compression of the follower disk in the filling unit, enabling the complete use of grease in the pail. The P3-01JL comes standard with the "Pressure Gun B-2," which doubles the maximum discharge pressure to 69MPa compared to the P3-01JC! The hose length is also longer than that of the P3-01JC. 【Main Features】 ○ Designed for commercially available 16-20kg cans ○ Applicable grease: up to #2 ○ Maximum discharge pressure: 69MPa ○ Gun: Pressure Gun B2 ○ Accessories: Follower disk, reminder spring ○ Trolley [TR-5] is optional. 【Case Studies】 〇 Maintenance departments of automobile production plants, steel mills, paper mills Equipment manufacturer maintenance departments, cement plants, molding machine manufacturer production plants Food factories, bearing manufacturer production lines, set manufacturers ● For more details, please visit our website or contact us.
For concrete and repainting! We introduce our pool paint primer.
"#750 Primer" is a primer for our pool paint, suitable for concrete and repainting. The coverage area for a 15kg set is approximately 100m² to 150m² per application. Please contact us if you have any inquiries. 【Application Specifications Example】 <When using Atom Pool Paint #70 for top coating> ■ Dilution amount (weight %): Synthetic thinner No. 6 (0-5) ■ Application amount (kg/m²): 0.1-0.15 ■ Application method - Mix the main agent and hardener in a ratio of 2:1 (weight ratio). - Add 50% (weight ratio) G filler to the mixed paint and stir thoroughly with a mixer (ordinary Portland cement is also acceptable). - If necessary, add synthetic thinner No. 6 at 0-5% and apply with a roller or brush. ■ Painting interval (23°C): 3 hours to 2 days *For more details, please refer to the external link page or feel free to contact us.
It is a highly efficient and economical centrifugal pump, and a high-quality explosion-proof pump.
The centrifugal pump "LKHex" is a highly efficient and economical centrifugal pump that meets the requirements of the ATEX Directive 94/9 IEC Group II, Categories 2 and 3, Temperature Classes T3 and T4. The LKHex is available in nine sizes: -10, -15, -20, -25, -35, -40, -45, -50, and -60. The pump sizes and performance data of the LKHex are the same as those of the standard LKH pumps. The KHex pump consists of a motor, stub shaft, mechanical compression coupling, adapter, back plate, impeller, pump casing, and shaft seal. Additionally, the LKHex is equipped with a stainless steel shroud to protect the motor and comes with a support bar with four height-adjustable legs. For more details, please download the catalog.
![Stirring body "Ball Turbine" [Demo unit available for loan]](https://image.mono.ipros.com/public/product/image/33d/2000414490/IPROS53238876646768703594.jpeg?w=280&h=280)
Preventing sedimentation of suspensions and stirring slurries and high-viscosity solutions! The evolved version of "M-Revo" will solve your stirring problems!
Do you have any concerns regarding stirring? ■ Settling occurs, and it doesn't mix evenly ■ It foams up, and it takes time to defoam ■ The viscosity is high, making it difficult to mix ■ Cleaning is troublesome and time-consuming The "Ball Turbine" features a large angled groove that creates a powerful lateral discharge flow to lift settled materials, effectively stirring even high-viscosity liquids throughout【*See video】. Additionally, its shape minimizes vortex formation, reducing air entrapment even at high speeds, which helps to suppress foam generation. Moreover, its simple design makes cleaning a breeze! *For more details, please request our materials or view the PDF data available for download.
CFRP carbon fiber reinforced plastic autoclave molding, processing, and manufacturing services. 【*Clean room facilities available!】
"CFRP (Carbon Composite)" is a composite material made of carbon fibers and resin (such as epoxy and phenol), which is much lighter and has higher strength compared to metal materials. By combining various materials such as fiber direction, the number of fiber laminates, high-strength fibers, and aramid fibers, it achieves even higher rigidity. At SHAPE FIELD, we specialize in autoclave-molded products suitable for small lot production and are currently seeking prototypes, development, and testing opportunities. 【Do you have any of these concerns?】 ■ I want to achieve weight reduction while maintaining strength... ■ I want to use resin for weight reduction, but it's impossible due to high vibration areas... ■ I want to block electromagnetic waves with a lightweight material... SHAPE FIELD is here to assist those with challenges related to CFRP. If you would like a sample, please contact us or download our catalog.
Recommended for applications with low leakage or non-porous applications.
The small ejector "Chip Pump X Series" is recommended for applications with low leakage and non-porous uses. It comes with a hose connector for compressed air pathways. 【Product Lineup】 ○X5L ○X10L ○X20L For more details, please contact us or download the catalog.
It demonstrates high operational reliability even with fluctuations in compressed air pressure and at low pressures.
The medium-sized ejector "piCLASSIC Pi model" adopts the most energy-efficient ejector technology. It demonstrates high operational reliability even with fluctuations in compressed air pressure or at low pressures. The COAX Pi48 three-stage cartridge has a large capacity that can accommodate between 1 to 6 units. The compact piCLASSIC can easily increase its capacity as needed. 【Features】 ○ Achieves high vacuum levels even at a supply pressure of 0.3 MPa ○ Lightweight and modular design allows for various combinations ○ Easy disassembly for maintenance For more details, please contact us or download the catalog.
Vertical dry vacuum pump suitable for solvent recovery in chemical plants and pharmaceutical manufacturing plants.
The "TRV Series" is a versatile dry vacuum pump uniquely developed as a vacuum pump that is strong against condensable gases. The gas flow path is arranged in a Down-Flow configuration, allowing mist and liquids condensed inside the pump, which are drawn in with the gas, to flow down to the discharge port and be easily discharged and collected under atmospheric pressure. This makes it an extremely robust pump against mist inflow and condensate from gases. In addition to the standard FC material, corrosion-resistant materials are also available for selection. 【Features】 ○ Strong against liquids ○ Energy-saving, high-performance design ○ Low temperature rise ○ Capable of suctioning high-temperature gases ○ Small installation footprint For more details, please contact us or download the catalog.
