We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

resin(100) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

resin Product List

76～90 item / All 276 items

Displayed results
Basic Knowledge of Thermal Conductivity Thermal Conductivity Table Rigid Polyurethane, etc.

Basic Knowledge of Thermal Conductivity Thermal Conductivity Table Rigid Polyurethane, etc.

We will introduce the basic knowledge of thermal conductivity, starting with the characteristics of our materials!

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with thermal conductivity increasing in the order of "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mk (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mk) *For more details, please refer to the PDF document or feel free to contact us.

  • Other Auto Parts
  • Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High heat-resistant epoxy resin liquid material 'VX-3657A/B'

High heat-resistant epoxy resin liquid material 'VX-3657A/B'

Adapted for high heat resistance! We provide liquid formulation materials used in power modules and more.

"VX-3657A/B" is a liquid epoxy resin formulation designed to meet the high heat resistance requirements associated with the advancement and miniaturization of electronic products. Due to its characteristics of high heat resistance, high fluidity, and low stress, it is applicable in power modules and similar applications. Additionally, because of its low linear expansion and low shrinkage rate, it is also used for high heat-resistant substrate encapsulation. 【Physical Property Data (Partial)】 ■ Curing Conditions ・100℃×1h + 180℃×2h ■ Glass Transition Temperature ・200℃ ■ Linear Expansion Coefficient α1 ・14ppm *For more details, please refer to the PDF document or feel free to contact us.

  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thomson Blade Performance Testing Machine "TSV Type"

Thomson Blade Performance Testing Machine "TSV Type"

This is a notice from Mutou Design Co., Ltd. regarding the "Thomson Blade Performance Testing Machine, Model TSV."

This is a device for inspecting the extraction unevenness of label Thomson blades. By adjusting the pressing distance in increments of 0.01mm, the extraction unevenness can be visually confirmed. 【Features】 ■ A load cell-equipped screw servo is used in the pressing section, achieving high precision with a repeatability of ±0.01mm. ■ The dedicated software allows for recording and managing distance and pressing load. ■ A powder brake is employed in the unwinding section to maintain a constant tension on the test paper material.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Basic knowledge of rigid polyurethane: Cyclopentane, water resistance (polyether type)

Basic knowledge of rigid polyurethane: Cyclopentane, water resistance (polyether type)

Explanation of the differences between polyether-based and polyester-based materials! Introduction to the basics of rigid polyurethane.

I will introduce the differences between polyether-based and polyester-based materials. The molecular structures of polyester-based urethane and polyether-based urethane are different. Polyether-based urethane contains -O- within its bonding molecules, and in principle, this molecular structure is not affected by H2O (water). In other words, it is a material that is strong against water. An example of this is its use in bathtub covers. On the other hand, polyester-based urethane contains -COO- within its bonding molecules, and this molecular structure tends to react with H2O (water) and decompose into -COOH (acid) and -OH (alcohol). Therefore, polyester-based urethane is generally said to have inferior water resistance. *There are also polyester-based materials with high water resistance. *For more details, please refer to the PDF materials or feel free to contact us.

  • plastic
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transparent and visualization model production, capable of withstanding temperatures up to 220 degrees.

Transparent and visualization model production, capable of withstanding temperatures up to 220 degrees.

Total support from specification review to secondary processing! We propose suitable materials and methods based on heat resistance, strength, shape, and more.

We provide total support from 3D data creation, modeling, machining, to inspection according to specifications. Machining is possible with a minimum intersection tolerance of ±0.05. We will listen to your specifications and propose suitable materials and methods. 【Features】 ■ Proprietary developed material: Heat-resistant up to 220℃ transparent resin for light curing SIS-200 ■ Total support from specification consideration to secondary processing ■ Machining is possible with a minimum intersection tolerance of ±0.05 ■ We propose suitable materials and methods based on heat resistance, strength, shape, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • Contract manufacturing
  • 3D Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Polystyrene resin "PSJ-Polystyrene G9001"

Polystyrene resin "PSJ-Polystyrene G9001"

Like regular GPPS, it can be molded by injection and extrusion! It is a heat-resistant grade product.

"PSJ-Polystyrene G9001" is a transparent heat-resistant styrene-based copolymer with a Vicat softening temperature approximately 15°C higher compared to high heat-resistant GPPS. Like regular GPPS, it can be processed by injection and extrusion molding. It is recommended for applications that require heat resistance, such as microwave containers. For more details about other products, please contact us. 【Features】 ■ Heat-resistant grade ■ Has heat resistance between GPPS and polycarbonate ■ Approximately 15°C higher Vicat softening temperature compared to high heat-resistant GPPS *For more details, please refer to the PDF document or feel free to contact us.

  • Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RILSAN (Polyamide 11, PA11)

RILSAN (Polyamide 11, PA11)

High-performance polyamide 11 made from 100% plant-derived carbon: high-performance polyamide based on PA11 (Nylon 11).

By pressing the seeds of "castor bean," which can be cultivated even in barren land where edible plants do not grow, we can obtain "castor oil." Arkema synthesizes 11-aminoundecanoic acid (PA11 monomer) by chemically processing castor oil and is the only company in the world that manufactures and sells polyamide 11 (PA11, nylon 11) under the brand name Rilsan. Rilsan has obtained the biomass mark established by the Japan Organic Resources Association and has been certified as biomass plastic by the Japan Bioplastics Association, being listed on the positive list. Rilsan (PA11) has good crystallinity, making it significantly superior in "chemical resistance," "impact resistance," and "thermal degradation resistance" compared to PA12 (nylon 12), which has similar properties. Due to the following excellent characteristics, Rilsan has been used in various applications for over 60 years: - Low density (1.03) - Abrasion resistance and scratch resistance - Wide temperature range (-40°C to 150°C) - Weather resistance - Excellent mechanical strength - Heat resistance - Flexibility - Molding processability - Chemical resistance - Low water absorption rate

  • Engineering Plastics

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Synthetic Resin Field] Liquid Urethane Resin 'Efrethan'

[Synthetic Resin Field] Liquid Urethane Resin 'Efrethan'

Low viscosity liquid! We respond to a wide range of applications from high-performance types to environmentally friendly types.

"Efretan" is a two-component reaction-type fast-curing, solvent-free, low-viscosity liquid urethane resin. It possesses a well-balanced performance required for coating resins and is highly anticipated in a wide range of fields, from civil engineering and construction to home appliances and artistic modeling, as a resource-saving and pollution-free coating material. 【Features】 ■ Cures extremely quickly at room temperature after two-component mixing ■ 100% resin, solvent-free, and environmentally friendly ■ Low-viscosity liquid that can be coated without dilution during use ■ Strong coating film with excellent elasticity and impact resistance unique to urethane ■ Good leveling properties, resulting in a smooth, glossy coating film *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Basic knowledge of thermal conduction, thermal conductivity table, rigid polyurethane, etc.

Basic knowledge of thermal conduction, thermal conductivity table, rigid polyurethane, etc.

Thermal conductivity is the amount of heat that flows through an area of 1 m² in one second when there is a temperature difference of 1°C across a thickness of 1 m.

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with the order of thermal conductivity being "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mK (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mK) *For more details, please refer to the PDF document or feel free to contact us.

  • Injection Molding Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection molding SPS engineering plastics for automotive parts and medical devices.

Injection molding SPS engineering plastics for automotive parts and medical devices.

Excellent hydrolysis resistance and chemical resistance! Can be used for connectors and engine control components.

HEVs require handling high currents and high voltages due to the use of high-output motors. Therefore, materials for connectors and terminals must have heat resistance and electrical reliability (high dielectric strength and tracking resistance). "SPS (engineering plastic)" has excellent electrical properties because it does not have polar groups, making it suitable for electrical and electronic components used in HEVs. 【Features】 ■ Low specific gravity (lower than other engineering plastics) ■ Heat resistance (high load deflection temperature 250°C, low load deflection temperature 268°C) ■ Hydrolysis resistance ■ Chemical resistance (acid resistance, alkali resistance, oil resistance, aliphatic solvent resistance) ■ Electrical properties (extremely low dielectric loss, good tracking resistance) *For more details, please refer to the PDF document or feel free to contact us.

  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-quality recycled PEEK resin "PKR Series"

High-quality recycled PEEK resin "PKR Series"

It is suitable for parts used in harsh environments such as gears, screws, bearings, and tie wraps!

We would like to introduce the high-quality recycled PEEK resin "PKR Series" handled by Kotec Co., Ltd. This product is PEEK resin that has been recycled using Kotec's unique technology. It can be used for parts such as gears, screws, bearings, and cable ties that are used in harsh environments. We have newly added three non-reinforced grades: "PKR-10," "PKR-20," and "PKR-30," as well as a GF 30% reinforced grade "PKR-30G30." 【Features】 ■ PEEK resin recycled using our unique technology ■ Suitable for parts used in harsh environments ■ Four types: "PKR-10," "PKR-20," "PKR-30," and "PKR-30G30" *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Composite Materials
  • Other metal materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Graphene heat dissipation resin (graphene pellets)

Graphene heat dissipation resin (graphene pellets)

The applications for heat-curing resins, three-dimensional heat dissipation materials, and thermal management resins are expanding.

We would like to introduce a thermosetting molding resin material that can "dissipate heat" while being a resin by adding graphite. We have four types of graphene phenolic resin materials available. Regarding molded products, we can assist you from consultation, material selection, drawing review, mold production, prototype creation, to mass production, so please feel free to contact us. Additionally, the manufacturing of these molded products will be handled by our "overseas partner company."

  • Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heparin HyperD M

Heparin HyperD M

Affinity chromatography resin that provides high binding capacity at high flow rates.

Heparin HyperD M resin is a technically advanced, high-speed, large-capacity affinity chromatography resin suitable for the purification of biomolecules that bind to heparin, such as coagulation factors, growth factors, and lipoproteins. The unique composite structure of Heparin HyperD M has been designed to provide excellent dynamic capacity at high linear fluid velocities. HyperD resin consists of porous, rigid mineral beads containing heparin bound to the hydrogel filling pores. Heparin HyperD M has an average particle size of 80 μm and is used in the purification of ATIII at scale. The resin can be packed into columns of various sizes, from milliliters to over 100 liters, and operates at low back pressure and high flow rates.

  • サブ11.PNG
  • サブ１.PNG
  • サブ２.PNG
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Self-hardening furan resin "Xfuran"

Self-hardening furan resin "Xfuran"

Self-hardening phenolic resin with high initial strength.

"Xfuran" is a self-hardening furan resin binder developed by our company. The history of the furan resin process in the Japanese casting industry is the very history of "Xfuran," and the technology we have accumulated over many years can certainly meet your trust. Please feel free to contact us if you have any requests. 【Features】 ■ High initial strength can be obtained ■ Molding is easy, and molding labor can be reduced ■ The dimensional accuracy of the sand mold is excellent, improving the accuracy of the castings ■ Environmentally friendly with low gas emissions during casting ■ Easy sand removal after pouring ■ Over 95% sand recovery is possible ■ The mixed sand has excellent fluidity *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Molding and Processing: Miorex PMX-573(S)

Molding and Processing: Miorex PMX-573(S)

Outstanding cost performance and safety without the use of asbestos.

The Miolex series is a product that combines excellent thermal insulation, mechanical strength, outstanding dimensional stability, exceptional cost performance, safety without the use of asbestos, electrical insulation, and machinability. 【PMX-573(S) (Basic Grade)】 Heat resistance temperature (°C): 250 Compression creep (％): 0.71 Bending strength (MPa): 100–150 Compression strength (MPa): 150–200 Impact strength (J/cm): 1.5 Thermal expansion rate (1/°C): 6.6×10^(-8) Thermal conductivity (W): 0.3 Volume resistivity (Ω-cm): FW,★1=10^12, FW,★2=10^7 Water absorption rate: 2.0–5.0 Specific gravity: 2.0–2.2 At our company, we perform precision machining of PMX-573(S) using numerous machine tools in a temperature-controlled environment managed 24 hours a day. *For more details, please refer to the PDF document or feel free to contact us.

  • Composite Materials
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to resin

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.