Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 18 items
Noise control related products, conductive spiral
The cable bend section can also be easily shielded. It is ideal for electromagnetic noise countermeasures for cables. The conductive spiral can bind and protect cable bundles while also suppressing electromagnetic noise.
A compact spiral freezer and cooler that has a large processing capacity while taking up little space.
The drive unit is installed outside the upper compartment and is in a normal temperature range. As a result, there is little degradation of oil and grease, leading to a long lifespan. All bearings inside the compartment are oil-free. Therefore, there is no need for maintenance. The spiral parts are made of stainless steel (SUS-304), so there is no rust. The clean floor surface makes it easy to clean every corner, keeping it always hygienic. Of course, it is perfectly suited for HACCP standards of cleanliness.
We have a variety of automotive parts and accessories available!!
Incredible thinness! With a depth of just 41.5mm, the angle of the stand is also adjustable. Resonant clear sound.
We are processing 3mm x 3mm square bars into coils.
We are processing 3mm x 3mm square bars into coils. The material is "stainless steel wire, SUS304." The inner diameter side is fixed to a shaft and is used as a conveyor for transporting powders and viscous materials. To maintain a consistent winding pitch, we use a CNC-controlled winding machine. Our company applies wire winding and bending technologies to manufacture various components, not limited to springs. Our technical staff will respond carefully, so please feel free to consult with us. Tsurugaoka Spring Co., Ltd. Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.
Spiral heat exchangers miniaturized to the extreme.
A compact series that retains the features of spiral heat exchangers. The heat transfer area of 0.3 to 0.6 m² is achieved in a size that can be held by hand, making it lightweight. It can be installed with the ease of a valve, making it very user-friendly. We have stock items available, allowing for short delivery times.
Drilling and threading in one operation! Easier hole processing than manual work.
The "Drill Unit Tap (for through holes)" is a hexagonal shank spiral that can complete both pilot hole processing and threading in one operation. It is capable of hole processing and thread correction for materials such as stainless steel, iron, aluminum, and brass. It is compatible with drill drivers and impact drivers that have forward and reverse rotation, and we offer a total of 8 individual types, a set of 16 pieces, and a dedicated case for 16 holes. 【Lineup (partial)】 ■BT-M3 - Total length: 65mm, thread diameter: M3, pitch: 0.5mm, tip blade diameter: 2.5mm ■BT-M4 - Total length: 65mm, thread diameter: M4, pitch: 0.7mm, tip blade diameter: 3.3mm ■BT-M5 - Total length: 68mm, thread diameter: M5, pitch: 0.8mm, tip blade diameter: 4.2mm *For more details, please refer to the PDF document or feel free to contact us.
Seamless continuous molded spiral
Kyoto Spa manufactures the screws (also known as spirals or blades) of screw conveyors that transport powders and granules using a "continuous forming" method (patented). While conventional screws are made by welding cut steel plates together, our continuous forming method eliminates any welded joints. As a result, the surface of the screw is smooth, and there are fewer processes after welding, allowing for reduced lead times and cost savings. Additionally, we can accommodate a variety of specifications, including inner and outer diameters, pitch, and materials, and we respond broadly to customer requests from prototype to mass production.
The unique spiral structure accurately protects the cable from bending actions.
The unique spiral structure accurately protects the cable from bending actions.
We can also customize the production according to your preferences, such as changes to the range of motion, so please feel free to consult with us!
The "TC-93160A" is a super compact spiral that can shorten measurement time and reduce costs. It operates in the frequency range of 6000 to 12000 MHz, with dimensions (WxDxH) of 50x50x17.6 mm. Additionally, the far-field type is used at a distance of 50 to 200 mm from the DUT. While precise positioning is not required, it is recommended for use in medium to large shielded boxes. 【Features】 ■ Super compact ■ Wide bandwidth ■ Suitable for measurements in medium to large shielded boxes ■ Well-equipped dedicated fixtures for polarization switching and XYZ axis position adjustment ■ Shortened measurement time and cost reduction *For more details, please refer to the related links or feel free to contact us.
Super compact! We provide a dedicated fixture with features such as polarization switching and XYZ axis position adjustment.
The "TC-93043A" is a spiral suitable for measurements in medium to large shielded boxes with a wide bandwidth. The supported frequency range is 2000 to 7500 MHz, and the external dimensions (WxDxH) are 70x70x11.6 mm. It is used at a distance of 50 to 200 mm from the DUT for far-field type measurements. Additionally, we can customize the design according to your needs, such as changing the range of motion, so please feel free to consult with us. 【Features】 ■ Ideal for measurements in medium to large shielded boxes ■ Comprehensive dedicated fixtures for polarization switching and XYZ axis position adjustment ■ Reduction of measurement time and cost ■ Custom manufacturing available according to your requirements, such as changing the range of motion *For more details, please refer to the related links or feel free to contact us.
The supported frequency range is 700 to 7500 MHz! It enables a reduction in measurement time and costs.
The TC-93061A is an ultra-compact, wideband far-field spiral. The far-field type is used at a distance of 50 to 200 mm from the DUT. Accurate positioning is not required, but it is recommended for use in medium to large shielded boxes. The supported frequency range is 700 to 7500 MHz, and the dimensions (WxDxH) are 106x130x15.6 mm. Custom manufacturing is also possible to accommodate changes in the movable range, so please feel free to consult us. 【Features】 - Suitable for measurements inside medium to large shielded boxes - Well-equipped dedicated fixtures for polarization switching and XYZ axis position adjustment - Reduction of measurement time and cost - Ultra-compact - Wideband *For more details, please refer to the related links or feel free to contact us.
A compact spiral freezer and cooler that offers high processing capacity while taking up little space.
The drive unit is installed outside the upper compartment and is in a normal temperature range. As a result, there is little deterioration of oil and grease, leading to a long lifespan. All bearings inside the compartment use oil-free technology, so there is no need for maintenance. The spiral parts are made of stainless steel (SUS-304), so they do not rust. The clean floor surface makes it easy to clean every corner, ensuring it remains always hygienic. Of course, it is perfectly suited for HACCP standards of cleanliness.
We have a variety of automotive parts and accessories available!!
This is a slim-designed horn that boasts the strongest bass in its class.
Introducing the problems that occur on sites managing many pumps and their solutions!
At the industrial waste disposal site, various liquids are brought in daily and processed for environmental conservation. The fact that there are many types of liquids means that many pumps are needed to transport them. This time, we will introduce the problems that occur at sites managing such a large number of pumps and their solutions. *For detailed information, please refer to the related links. Feel free to contact us for more details.
A shaft is passed through the inner diameter, and it is used as a conveyor to transport powders and other materials.
We are processing 2.0 x 3.0 mm square wire into coils. The material of the square wire is iron-based spring material "Piano Wire Type A, SWP-A." The surface treatment is trivalent chromate plating. A shaft is passed through the inner diameter side, and it is used as a conveyor to transport powders and other materials. Our company applies wire winding and bending technology to manufacture various parts, not limited to springs. Our technical staff will respond carefully, so please feel free to consult with us. Tsurugaoka Spring Co., Ltd. for springs and springs Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web meetings.
