Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 74 items
The 16 slits (cuts) maintain the vibration accuracy in optimal condition.
The Colette Chuck "ER Series" comes in 8 sizes ranging from ER8 to ER50, with minimum diameters from 0.2 mm to 36 mm. The model number and dimensions are engraved, preventing selection errors. A lot number is engraved on all products, ensuring traceability for all processes. For more details, please download the catalog.
Shaft components, disc and flange components, bar materials, gear components, and various other automotive parts, as well as hydraulic equipment parts and irregular materials are also supported.
1. High rigidity: Maximum clamping force of 150 kN (standard) 2. High gripping power: Minimum clamping width of 2 mm (standard) 3. High setup efficiency: Collet change time: 30 seconds 4. Repeat position accuracy: 0.010 mm 5. There is no metal connection to the collet, allowing for strong clamping. 6. Clamping around the entire workpiece results in minimal distortion. 7. Various components are designed and manufactured domestically, and we respond to various requests.
Clamp thin materials without deformation! High-precision Swiss chuck with a compact design.
"LZK" is a long-stroke multi-tooth blade chuck. It is suitable for thin workpieces as it contacts the work on multiple surfaces. It can clamp thin workpieces without deforming them. Additionally, it can accommodate workpieces of different diameters with a single collet due to its long stroke. Despite its compact design, it can adapt to workpiece diameters of up to 200mm. 【Features】 ■ Repetitive runout accuracy of 0.01mm or less ■ Pull-in type ■ Suitable for workpiece diameters up to 200mm ■ Capable of drilling large through holes in bar materials ■ High repetitive accuracy and high roundness ■ Resistant to the intrusion of chips and other debris *For more details, please refer to the PDF document or feel free to contact us.
We have a variety of tooling available, including ER, hydro, and press-fit options.
The product lineup has significantly increased. 【Features】 - A wide variety of YG collet chucks (ER) at affordable prices. - Gauge line lengths ranging from 35 to 350. Seiwa face mill arbor (FMH). - Switching from baked bushing to Mapal high-torque chuck (HTC). - Mapal hydro chuck (MHC) boasts exceptional precision for long drill processing. - REGO press-fit chuck (Power Grip) improves cutting conditions, machining accuracy, and tool life. - EWS quick change system (Varia) reduces setup time on lathes. *For more details, please refer to the PDF materials or feel free to contact us.
High precision and high quality! A wide variety of collet chucks that accommodate various workpieces are abundantly featured!
The "TAKAMAZ Collet Chuck Series Catalog" features products that achieve wear resistance, robust spring characteristics, and high precision. It includes a wide range of options tailored to various applications, such as the "TSC-D26," which allows for the workpiece end to be placed against the collet chuck's end face without an external stopper, enabling the determination of the total length of the item, as well as the "TSC-D19" and "TSC-D43." [Contents (excerpt)] ■ TSC-D26 model (850 collet chuck) ■ TSC-D19 model (TZ type collet chuck) ■ TSC-D43 model (2A collet chuck) ■ TSC-D55 model (φ51 through collet chuck) ■ TSC-D68 model (φ65 through collet chuck), etc. *For more details, please refer to the PDF document or feel free to contact us.
![[Special Customization] Fixed Taper Collet Chuck (Internal Diameter Gripping)](https://image.mono.ipros.com/public/product/image/1da/2000182760/IPROS1059934900145629683.jpg?w=280&h=280)
Our motto is to never refuse a request, with high quality, low price, and short delivery time as our fundamental principles.
We design and manufacture various types of collet chucks, including suction collet chucks, inner lining collet chucks, and special collets. 【Examples of Improvements for Collet Chucks】 ■ Troubleshooting for chucking with outer diameter and inner diameter collet chucks (machine stoppage issues) ■ Improvement of workpiece runout accuracy, roundness, and wall thickness after chucking ■ Prolonging the lifespan of collet chucks and surrounding components (crack prevention and wear resistance) ■ Slip prevention during processing ■ Reducing cycle time for processed workpieces by increasing the rigidity of collet chucks and surrounding components ■ Reducing setup changeover time ■ Total cost reduction through design changes (including material changes) The improvement examples mentioned above are just a few. We will respond to various improvements, so please consult with us. However, there may be cases where improvements cannot be made at once. Nevertheless, our company will never give up as long as our customers do not. We will continue to contribute to our customers' manufacturing for the long term. For more details, please download the catalog or contact us.
![[Special Customization Available] Fixed Taper Collet Chuck (Internal Diameter Gripping)](https://image.mono.ipros.com/public/product/image/3a6/2000182874/IPROS2597513901094156399.jpg?w=280&h=280)
Our motto is to never refuse a request, with high quality, low price, and short delivery time as our fundamental principles.
We design and manufacture various types of collet chucks, including suction collet chucks, inner lining collet chucks, and special collets. 【Examples of Improvements for Collet Chucks】 ■ Troubleshooting for chattering during chucking with outer diameter and inner diameter collet chucks (machine stoppage issues) ■ Improvement of workpiece runout accuracy, roundness, and wall thickness after chucking ■ Extension of the lifespan of collet chucks and surrounding components (crack prevention and wear prevention) ■ Slip prevention during processing ■ Reduction of cycle time for processed workpieces by increasing the rigidity of collet chucks and surrounding components ■ Reduction of setup changeover time ■ Total cost reduction through design changes (including material changes) The improvements mentioned above are just a few examples. We are ready to address various improvements, so please consult with us. However, there may be cases where improvements cannot be made in one attempt. Nevertheless, our company will never give up as long as our customers do not. We will continue to contribute to our customers' manufacturing for the long term. For more details, please download the catalog or contact us.
![[Special Production Support] Suction Type Collet Chuck (Outer Diameter Gripping)](https://image.mono.ipros.com/public/product/image/458/2000182878/IPROS4566983278069361017.jpg?w=280&h=280)
Our motto is to never refuse a request, with high quality, low price, and short delivery time as our fundamental principles.
We design and manufacture various types of collet chucks, including suction collet chucks, inner lining collet chucks, and special collets. 【Examples of Improvements for Collet Chucks】 ■ Troubleshooting for chucks using outer diameter and inner diameter collet chucks (machine stoppage issues) ■ Improvement of runout accuracy, roundness, and wall thickness of chucked workpieces ■ Increased longevity of collet chucks and surrounding components (crack prevention and wear resistance) ■ Slip prevention during machining ■ Reduction of cycle time for machined workpieces by enhancing the rigidity of collet chucks and surrounding components ■ Reduction of setup changeover time ■ Total cost reduction through design changes (including material changes) The improvement examples mentioned above are just a small part. We will respond to various improvements, so please consult with us. However, there may be cases where improvements cannot be made at once. Nevertheless, our company will never give up as long as our customers do not. We will continue to contribute to our customers' manufacturing for the long term. For more details, please download the catalog or contact us.
![[Special Production Support] Special Collet Chuck (Internal Diameter Gripping)](https://image.mono.ipros.com/public/product/image/94f/2000182882/IPROS2039221214893876441.jpg?w=280&h=280)
Our motto is to never refuse a request, with the fundamental principles of high quality, low price, and short delivery time.
We design and manufacture various types of collet chucks, including suction collet chucks, inner lining collet chucks, and special collets. 【Examples of Improvements for Collet Chucks】 ■ Troubleshooting for chucking with outer diameter and inner diameter collet chucks (machine stoppage issues) ■ Improvement of workpiece runout accuracy, roundness, and wall thickness after chucking ■ Increased lifespan of collet chucks and surrounding components (crack prevention and wear prevention) ■ Slip prevention during processing ■ Reduction of cycle time for processed workpieces through increased rigidity of collet chucks and surrounding components ■ Reduction of setup changeover time ■ Total cost reduction through design changes (including material changes) The improvements mentioned above are just a few examples. We will respond to various improvements, so please consult with us. However, there may be cases where improvements cannot be made at once. Nevertheless, our company will never give up as long as our customers do not. We will continue to contribute to our customers' manufacturing for the long term. If you would like more details, please download our catalog or contact us.
With the exchange from the collet front, the repeatability accuracy is within 10μm. There is a processing record on an NC lathe at 15,000 min-1 using an air collet.
1. High Precision The repeatability accuracy is below 10 μm. 2. Optimal for High-Speed Rotation There is minimal loss of gripping force at high rotational speeds, with a maximum rotational speed of 15,000 min-1. 3. Built-in Air Cylinder The built-in air cylinder for collet opening and closing results in a simple structure. 4. Compatibility with Our Chucks Adopting a rear port method, it is compatible with our palm chucks and air chucks, allowing for easy changes to the optimal chuck according to the workpiece. 5. Easy Collet Replacement Collets can be easily attached and detached by simply turning with a dedicated wrench by 60°. *For other functions and details, please refer to the catalog.
The attachment and detachment of the collet is easy, with high repeatability and support for automatic exchange by robots. The work clamp is strong and reliable.
The collet can be easily attached and detached, allowing for one-touch replacement within 30 seconds using dedicated tools (manual or air-operated). We have numerous delivery records supporting automatic collet exchange by robots. The work clamp is strong and reliable. The collet moves parallel to the workpiece, ensuring that clamping force is evenly and reliably transmitted. High clamping precision is guaranteed due to high-quality finishing, a simple mechanism, and parallel movement of the collet. High rigidity is achieved because the entire length of the chuck system is short, and the machining point is close to the machine spindle, allowing for high-rigidity cutting with minimal vibration, thus improving tool life. A 35% increase in rigidity and a 50% increase in clamping force compared to general types are realized. A wide clamping range is provided, with the gripping diameter of the collet being larger compared to the outer diameter of the collet chuck body. High-speed compatibility is ensured with minimal centrifugal force impact on the work gripping point due to chuck rotation, supporting speeds up to 6000 min-1 (refer to specifications for each model). The gripping part of the collet can handle various shaped workpieces, including ground finishes, serrations, and hex shapes.
Colette uses our standard AS type! Common use across the series is possible.
We would like to introduce our standard collet chuck 'Ass'y' that we handle. We offer the "AS F type," which is mounted on the spindle end via a flange, and the "AS N type," which is more compact due to its cap being a nut type compared to the AS-F type. Both are stationary collets, ensuring stable gripping accuracy. Additionally, the use of dust pads and chip covers allows for extended cleaning intervals. 【Lineup】 ■AS F-S5 ■AS F-S5 1/2 ■AS F-S6 ■AS F-S8 ■AS N-S6 ■AS N-S8 *For more details, please download the PDF or feel free to contact us.
[Short delivery time, high precision] Large design collet chuck. Repetition accuracy of less than 20μ!!
Large collet with outer diameter grip achieving repeatability of less than 20μ! High-precision large design collet chuck MAX500 ■□■Features■□■ ■Daringly taking on the somewhat risky request from the user for repeatability of less than 20μ ■Completed in a short delivery time. As a result of the inspection attendance, all requested items were cleared in one go ■Large collet chuck used in vertical machines with a drawbar thrust of 19.6kN ■Chuck outer diameter: Φ520 ■Chuck total length: 357mm ■Drawbar thrust: 19.6kN ■Grip force: 686kN *The workpiece diameter in the example is Φ450. ■We can accommodate outer diameter dimensions up to MAX500mm in a short delivery time. For more details, please download the catalog or contact us.
Built-in air cylinder, lightweight, compact, open-type inner diameter gripping hand.
This is an open (inward-opening) type hand that grips the inner diameter of workpieces. It is suitable for welding, bonding, inspection, and transportation of workpieces that cannot grip the outer diameter. It has a built-in air cylinder, allowing for immediate use after installation. By adjusting the gripping force with air pressure, it can accommodate soft workpieces or those that are prone to scratches. There are a variety of options available, including flange mounting, air suction nozzles, rotating types, and built-in gripping sensors. Please feel free to contact us.
