Electric discharge machine Product List and Ranking from 85 Manufacturers, Suppliers and Companies

Press mold [Introduction processing machine] high-precision wire electrical discharge machining machine

Achieving pitch accuracy of 0.001mm or better with high machine precision and temperature control close to that of a constant temperature room!

Nagumo Manufacturing Co., Ltd. has introduced a "High-Precision Wire Electrical Discharge Machine." It is one of the largest sizes among the wire electrical discharge machines made by Seibu Electric. The processing fluid is water-based, and it uses φ0.2 wire. We specialize in plate processing for molds, achieving a pitch accuracy of 0.001mm or better with the high machine precision characteristic of Seibu Electric and temperature control similar to that of a constant temperature room. 【Machine Information】 ■ Manufacturer: Seibu Electric Co., Ltd. ■ Machine Type: High-Precision Wire Electrical Discharge Machine ■ Model: SuperMM80B ■ Axis Movement: x800 y600 z230 ■ Installation Date: August 2021 *For more details, please refer to the PDF document or feel free to contact us.

Company：株式会社南雲製作所
Price：Other

Processing Contract
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exhibition at JIMTOF 2022 for Electric Discharge Machining Equipment

"Are you interested in electric discharge machines but think they are too expensive?" Here are the products scheduled for display!

Our company will be exhibiting at "JIMTOF2022" held at Tokyo Big Sight. We plan to showcase the "NC Fine Hole Electric Discharge Machine," as well as the "Threaded Fine Hole Electric Discharge Machine," "Electric Discharge Unit for Removing Broken Tools," and "Laser Marker." Finding a balance between high performance and cost-effectiveness is an eternal theme. If you are looking for a high-performance electric discharge machine at a low price, please take this opportunity to visit us. 【Event Overview】 ■ Dates: November 8 (Tuesday) to November 13 (Sunday), 2022 ■ Location: Tokyo Big Sight, East Hall 3 ■ Booth Number: E3007 ■ Exhibits: NC Fine Hole Electric Discharge Machine, Threaded Fine Hole Electric Discharge Machine, Electric Discharge Unit for Removing Broken Tools, Laser Marker *For more details, please refer to the PDF document or feel free to contact us.

Company：GSIクレオス　機材ソリューション部東京本社/大阪支店
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-precision machining examples (lens shapes)

High-precision distortion-free lens processing and polishing technology.

N.F.T. Corporation is a company located in Dazaifu City, Fukuoka Prefecture, that designs and manufactures semiconductor packaging molds, semiconductor manufacturing equipment, related parts, and peripheral units. We have a delivery record in 11 countries, primarily in Japan and Southeast/East Asia, and we offer a wide range of services with advanced technology based on our experience in manufacturing semiconductor manufacturing equipment and precision molds. 【Business Overview】 Surface grinding machines (including CNC) - 62 units Machining centers - 20 units Electrode processing machines - 8 units Electrical discharge machines - 26 units Wire electrical discharge machines - 8 units Small hole electrical discharge machines - 4 units Tool grinding machines - 4 units Milling machines - 11 units *We also have various measuring instruments, inspection equipment, pressure testing presses, and jigs available. Please feel free to contact us.

Company：エヌ.エフ.ティ
Price：Other

Mold Design
Other semiconductor manufacturing equipment
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Equipment] Wire Cut 'α-C400ia'

Introducing the wire cuts we have in stock! We cater to a wide range from one-of-a-kind items to mass-produced products.

We would like to introduce the equipment owned by Otani Iron Works. We have a FANUC wire cut machine, model 'α-C400ia'. We can accommodate a wide range of needs from one-off items to mass production, so please feel free to contact us. 【Equipment Information】 ■ Manufacturer: FANUC ■ Equipment Name: Wire Cut ■ Model: α-C400ia *For more details, please refer to the related links or feel free to contact us.

Company：大谷鉄工
Price：Other

Other processing machines
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

List of Main Machinery and Equipment

We have a range of machines including a 3D CAD system and precision surface grinding machines.

This document lists the main machinery and equipment of Koganei Mold. It features a lineup including a mold production management system, 3D CAM systems, and NC composite lathes. Our company is equipped with high-spec machines that create the best solutions for prototyping, mold manufacturing, molding (prototyping, small lots, mass production), and measurement. [Contents (excerpt)] ■ Wire-cut electric discharge machine ■ Graphite machining machine ■ Rigid machining center ■ NC milling machine ■ Precision molding grinding machine *For more details, please refer to the PDF document or feel free to contact us.

Company：コガネイモールド
Price：Other

Electric discharge machine
Machining Center
Other machine tools
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TAP SHOT NK2000 Small Electric Discharge Machine

Jimk Original Folding Tap and Drill Removal Dedicated Small Electric Discharge Machine

- Thank you for your patience!! The immediate delivery machine is scheduled to arrive in mid-October 2022! - This is a compact electric discharge machining machine, original to Nikko Kizai. It is a simple electric discharge machine specifically designed for removing broken taps and drills. Setting it up on the machining machine or workpiece is easy with magnets! It can be used anywhere!

Company：日工機材大阪本社
Price：100,000 yen-500,000 yen

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shape Electric Discharge Machining Machine Ax1601

Aitronics product! "Low price" "High performance" shape engraving electrical discharge machine.

It is a shape-cutting electrical discharge machine equipped with a full digital power supply that offers "low price" and "high performance."

Company：日工機材大阪本社
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Linear motor-driven electric discharge machining machine 'A5030L/A6040L'

3-axis high speed! Compact floor space, equipped with linear motors on the XYZ axes!

The "A5030L/A6040L" is a high-speed three-axis linear motor-driven electric discharge machining (EDM) machine with an all-in-one design that reduces the footprint by 10%. It employs linear motors on the X, Y, and Z axes with a high-rigidity column movable structure, achieving high-speed, backlash-free, and high-precision machining. Additionally, the adoption of SAC enables optimal discharge conditions from rough machining to finishing. Furthermore, the use of linear motors and an air balance system achieves high machining speed and responsiveness. 【Features】 ○ Compact floor space ○ Linear motors adopted for X, Y, and Z axes ○ New generation power circuit SAC adopted → Compared to conventional power supplies, it achieves up to 2 times the discharge efficiency for the processed metal and reduces wire wear by 15%, lowering running costs. ○ Air balance system → Particularly high quality is achieved in small diameter deep hole and rib machining. ○ Focus on operability → User-friendly interactive window adopted. For more details, please contact us or download the catalog.

Company：関東物産
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Equipment Introduction: "Electrical Discharge Machine"

Supports table sizes up to 1150×750×350! Wide processing is also possible.

Toa Seikei has established a manufacturing environment capable of producing stable and high-precision products with a variety of advanced processing equipment, including machine tools, graphite processing machines, machining centers, and electrical discharge machines such as Sodick and Mitsubishi. We can handle large-sized processing, such as molds for polyurethane foam used in automotive seats, which is one of our main products. There are few companies in the Kansai region that possess equipment of this class. We can accommodate table sizes up to 1150×750×350, allowing for wide processing capabilities. 【Features】 - Capable of handling large-sized processing (there are few companies in the Kansai region that possess equipment of this class) - Accommodates table sizes up to 1150×750×350! Wide processing is also possible *For more details, please contact us or download the PDF.

Company：東亜成型本社
Price：Other

Processing Contract
Contract manufacturing
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Wire Electrical Discharge Machining" *Video available

High-precision shape processing is possible regardless of the hardness of the workpiece! Wire processing that does not require multiple types of tools.

"Wire processing" is a discharge machining method that uses thin brass wire as an electrode. It allows for the workpiece to be cut into various shapes, similar to using a scroll saw. The wire can also be tilted using a tapered shaft, expanding the variety of machining shapes. High-precision shapes can be processed regardless of the hardness of the workpiece, and the amount of material removed from the workpiece is minimal. 【Features】 ■ Ability to cut into various shapes ■ Wire can be tilted using a tapered shaft ■ High-precision shapes can be processed regardless of workpiece hardness ■ Reduction in the amount of material removed from the workpiece ■ Various shapes can be processed using only one type of wire *For more details, please refer to the PDF document or feel free to contact us.

Company：ナムテクノ
Price：Other

Processing Contract
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Namtech Co., Ltd. General Catalog

Application of precision mold technology for fine hole machining, wire cutting, and fine hole electrical discharge machining.

The comprehensive catalog is a catalog that includes Namtechno's business activities and technologies, as well as examples of each product's manufacturing. [Contents] ■ Micro machining ■ Product introductions and processing examples ■ Namtechno's ideas ■ Namtechno's equipment *For more details, please contact us or download the catalog.

Company：ナムテクノ
Price：Other

Other molds
Processing Contract
Processing Jig
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NC Electric Discharge Machine Ax1601

It is a next-generation fully digital electrical discharge machining (3-axis NC control)!

This is a compact (about half a tatami mat in installation area), lightweight (200kg), low-cost (about one-third the price of competitor machines), energy-efficient, and easy-to-operate three-axis NC electrical discharge machining machine. It is capable of bottom machining on hard alloys using copper electrodes. Please contact us for more details.

Company：アイトロニクス
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-high-speed CNC Electric Discharge Machining Machine with Fine Pores 'A11MP1CNC'

Just 2 seconds per hole! A discharge machining tool that has achieved mass production with overwhelming processing speed.

The "A11MP1CNC" is a discharge machining machine developed by Astec, featuring a unique nozzle structure that achieves unprecedented processing speed. This has made mass production of fine hole machining possible. 【Features】 ■ Unique nozzle structure ■ Amazing processing speed ■ Mass production of fine hole machining *For more details, please refer to the catalog or feel free to contact us.

Company：アステック
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal for Equipment for Cutting Tools

The processing of stop holes in deep small-diameter holes and the burr issues of cross holes can be collectively resolved with fine hole discharge machining.

Many cutting tools now feature center holes for supplying cutting oil, as well as oil-through holes that run from the center hole toward the cutting edge. The center holes of increasingly miniaturized tools are becoming narrower and deeper. Fine hole electrical discharge machining excels at non-contact processing of small-diameter deep holes, allowing for the processing of center holes and the reduction of deburring processes at the cross sections of oil-through holes leading to the cutting edge through burr-free machining via discharge. Additionally, options specialized for processing the oil-through holes of miniaturized cutting tools, such as through detection and depth specification machining, are also being developed.

Company：アステック
Price：Other

Electric discharge machine
Electric discharge machine

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tabletop micro-hole electrical discharge machining machine

A tabletop fine hole discharge machining device that can easily process fine holes of approximately 0.05 mm.

The "Turtle No. 1," which boasts over 50 sales achievements in universities, research institutes, and companies around the world, has been eagerly revived under the supervision of Masuzawa Micro Machining Technology Consulting. By innovating the electrode shape, it is now possible to achieve even finer holes and non-uniform holes.

Company：アステック
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Drill a through hole of φ1.0mm into the 1500mm SKD11 hardened material.

A discharge machining unit that has reached a new frontier of L/D1500 times. It enables deep hole machining of small diameters, which is challenging for gun drilling.

The ultra-deep hole fine hole discharge machining unit "6Z1800" is a large processing unit with a main body dimension of approximately 2,500mm. It maximizes the advantages of "non-contact processing," a characteristic of discharge machining, achieving a through hole processing of 1,500mm that is impossible with drills. ◇ Processing is possible for diameters from φ0.3 to φ3.0mm! ◇ High-speed processing is possible due to a high-pressure pump that promotes the discharge of machining debris! ◇ Up to 8 special intermediate vibration dampers can be installed, enabling the realization of vertical holes with minimized vibration! Astech offers free test machining. Please feel free to contact us. *The maximum processing depth may vary depending on the conditions.

Company：アステック
Price：Other

Electric discharge machine
Electric discharge machine

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Advanced Electric Discharge Machining Machine 'EDMT-5' <Laser Cutting Specification>

Improving the accuracy of the machined surface and reducing processing costs! Copper tungsten is used for the electrodes.

The "EDMT-5" is a fully automatic PCD saw blade electric discharge machining (EDM) machine equipped with a carbon dioxide gas extinguishing device as standard. The electrode uses copper tungsten. It achieves improved machining surface accuracy and reduced processing costs. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Target Workpieces ・Outer diameter: φ255mm to φ610mm ■ Electric Discharge Machining Method ・Discharge Power Supply: HTD-ET98 (Sodick) ■ Machine Specifications ・Power Source: Electric (Three-phase 200V, 50/60Hz) *For more details, please refer to the PDF document or feel free to contact us.

Company：えのきだ
Price：Other

Other processing machines
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fully Automatic PCD Tipped Saw Side Discharge Processing Machine 'EDMF-5'

Electrodes made of copper tungsten! Achieving improved precision and reduced processing costs.

The "EDMF-5" is a fully automatic PCD chip saw side discharge processing machine that can process from φ80 for siding to general woodworking. The electrode features automatic truing and correction, controlled by a 5-axis servo motor. Additionally, there are models available with a feeding device. Please feel free to contact us when you need assistance. 【Target Workpieces (Partial)】 ■ Workpiece: Diamond chip saw ■ Saw diameter: φ80 to φ600 ■ Hole diameter: φ15.875 and above ■ Base thickness: up to 5mm ■ Number of teeth: 4 teeth and above (6mm and above) *For more details, please refer to the related links or feel free to contact us.

Company：えのきだ
Price：Other

Electric discharge machine
Electric discharge machine

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] What is discharge machining? An explanation of the overview and features!

Create complex shapes in a single processing step depending on the shape of the electrode! Suitable for small-scale production.

"Electrical discharge machining" is a method that transforms electrical energy generated between the electrode and the workpiece into heat to melt and process metal. It also makes it easy to process materials known as difficult-to-cut materials. Since it is a non-contact processing method, there is no load on the workpiece, and because it is processed in oil, thermal distortion is minimal. 【Features】 ■ Creates complex shapes in a single processing operation depending on the shape of the electrode ■ Suitable for small-scale production ■ Easily processes materials with poor machinability ■ No load on the workpiece due to non-contact processing ■ Minimal thermal distortion as it is processed in oil *For more details, please refer to the PDF document or feel free to contact us.

Company：ゲートジャパン
Price：Other

Processing Contract
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fine shape processing is possible! Wire processing (wire electrical discharge machining)

We can also respond to customers' short delivery time requests! Achieving high-precision fine processing with wire processing (wire electrical discharge machining)!

Product Introduction "Wire Processing" is a technology that uses metal wires ranging from Φ0.02mm to Φ0.35mm to cut and process metal materials with high precision. Typically, Φ0.2mm to Φ0.3mm brass wire is used. The processing utilizes electric discharge like lightning to cut while melting the metal with its heat, known as "non-contact and melting processing." This method results in minimal wear and achieves high precision finishes. At Kuroda Seiki, we use Φ0.2mm brass wire on all six wire processing machines (also capable of Φ0.1mm). We have introduced three wire CAMs and the latest high-speed processing machines, achieving a balance of "short delivery times and high precision." Features of Our Wire Processing - All models use Φ0.2mm brass wire (Φ0.1mm is also available) - Equipped with three wire CAMs and six processing machines - Introduction of the latest high-speed processing machines to improve productivity - Flexible response to short delivery time requests *For more details, please refer to the PDF document or feel free to contact us.*

Company：クロダ精機
Price：Other

Processing Contract
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Broken Tap Removal Electric Discharge Machine [Tap Knight]

Compact size for easy portability! Discharge machining tool for removing broken taps.

"Tap Night" is a discharge machining device for removing broken taps and drills that anyone can easily use. It features a discharge energy switch and has been compacted into a portable size. It can process without damaging the threads of the tap and can be used on all conductive metals such as iron, aluminum, and brass. 【Features】 ■ For removing broken taps ■ Usable on all conductive metals (iron, aluminum, brass, copper, cast iron, stainless steel, special steel, etc.) ■ Can also be used on carbide ■ Suitable for deep hole processing ■ Equipped with a discharge energy switch ■ Tap removal size ranges from M2 to M30 ■ Can process without damaging the threads of the tap *For more details, please refer to the PDF document or feel free to contact us.

Company：アンタック
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed wire electrical discharge machining machine VL series "Sodick" introduction

Achieving high surface roughness and complex machining! Wire cutting processing responds flexibly and quickly with short delivery times.

We have introduced the VL series "Sodick" high-speed wire electrical discharge machining (EDM) machine. By combining machining centers and wire cutting, we achieve high surface roughness and complex processing. From parts processing to ultra-precision mold processing, our new wire EDM machine will solve your problems. 【Features】 ■ Dramatically improved speed compared to conventional machines ■ Supports short delivery times ■ Capable of reading DXF format ■ High precision *For more details, please refer to the related links or feel free to contact us.

Company：稲田製作所
Price：Other

Electric discharge machine
Electric discharge machine

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-precision fine hole electrical discharge machining machine "Large 8000G"

High-precision fine hole discharge machining machine ideal for LCD molds!

The "Large 8000G" is a high-precision small hole electrical discharge machining (EDM) machine that can exchange electrodes 100% unmanned. To prevent backlash, double nuts are employed on the XY axis instead of the linear scale used in general small hole EDM machines. Additionally, it uses a low and open large stone table, making it safe to set up large workpieces by oneself. 【Features】 ■ Advantageous for processing large products ■ Uses a low and open large stone table ■ Safe for one person to set up large workpieces ■ Equipped with a pitch correction system specifically for large machines ■ Maintains pitch stability even after more than one year of use *For more details, please refer to the catalog or feel free to contact us.

Company：HANKOOK NSD
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact size for easy portability! Electrode discharge machining for removing broken taps.

With the adoption of printed circuit boards, it has been changed to be lightweight and compact! Introducing the portable discharge machining device for removing broken taps, "Tap Night."

"Tap Night" is a discharge machining device for removing broken taps and drills that anyone can easily use. It is equipped with a discharge energy switch, allowing processing without damaging the threads of the tap, and can be used on all conductive metals such as iron, aluminum, and brass. Its compact size makes it easy to carry, and tap removal can be done without moving the workpiece. It is also recommended for users processing large workpieces. 【Features】 ■ Equipped with a discharge energy switch ■ Can process without damaging the threads of the tap ■ Usable on all conductive metals such as iron, aluminum, and brass ■ Can also be used for deep hole processing ■ Tap removal sizes range from M2 to M30 ■ Usable on carbide as well *For more details, please download the PDF or feel free to contact us.

Company：西野製作所
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Equipment Introduction] Wire Electrical Discharge Machine

Processing is possible even for items that have been sintered! The movement range is x750mm, y500mm, and z400mm.

We would like to introduce the machinery and equipment owned by Kanapresto Co., Ltd. Our company has a wire electrical discharge machine, the Sodick AQ750L. The travel range (maximum processing dimensions) is x750mm (1050), y500mm (750), and z400mm (400), and it is capable of processing hardened materials. It can accommodate key machining without cutting tools and involute machining. Please feel free to consult us when needed. 【Machine Overview】 ■ AQ750L: 1 unit ■ Travel range (maximum workpiece dimensions) ・ x750mm (1050) ・ y500mm (750) ・ z400mm (400) ■ Capable of processing hardened materials ■ Key machining without cutting tools ■ Involute machining *For more details, please refer to the PDF document or feel free to contact us.

Company：カナプレスト本社
Price：Other

Electric discharge machine
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example of Clothing River Processing] SUS440 (Hardness HRC58)

Rich processing technology! Here are examples of processing SUS440 (hardness HRC58)!

We would like to introduce examples of processing from Iikawa Manufacturing. We have processed "SUS440 (hardness HRC58)." Our company responds to customer demands by combining various processes, including 3D cutting, 3D laser engraving, form grinding, wire electrical discharge machining, and die sinking electrical discharge machining, regardless of the industry. Please feel free to contact us when you need our services. 【Processing Examples】 ■ Stainless Steel ■ Aluminum *For more details, please refer to the PDF document or feel free to contact us.

Company：衣川製作所本社
Price：Other

Processing Contract
Contract manufacturing
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Can we achieve Rz0.2μm lap processing for the development prototype?

Introducing a case that solved the challenge of "pursuing precision in lap processing"!

At Ohno Seiko Co., Ltd., our lapping process can achieve a mirror finish of Rz0.03μm on flat surfaces and Rz0.2μm or higher on irregular shapes. 【1】Consultation Details When aluminum is riveted, it gets welded. I want to increase the surface roughness more. Is it possible to go from Rz0.8μm to Rz0.2μm? 【2】Proposed Solution After two years of technical research and development, we have achieved Rz0.2μm while maintaining a precision of ±0.02! *For more details, please download the PDF or feel free to contact us.

Company：大野精工機工販売事業部
Price：Other

Processing Contract
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CNC Molybdenum Wire Electric Discharge Machine "HB Series"

Introducing a machining system that uses a Japanese-made servo system, known for its excellent durability and precision!

Daihō Seiko handles the "CNC Molybdenum Wire Electrical Discharge Machine" as the exclusive distributor for Sanko Technology in Japan. The high processing capability of molybdenum wire, which can accommodate various conductive metals, along with its user-friendly and reliable design, has received high praise overseas and is currently used in many countries around the world. Additionally, the "HB400" has won the Product Design Award at the IF Design Award and the Red Dot Design Award. 【Features】 ■ The cover of the processing table adopts a liftable design ■ Raising the cover prevents the splashing of cutting fluid ■ Each part has been reviewed and redesigned from conventional machines ■ Pursues ease of use, high precision, and high reliability ■ Combines the electrical discharge machining technology cultivated so far to achieve excellent processing performance *For more details, please refer to the PDF materials or feel free to contact us.

Company：大野精工機工販売事業部
Price：Other

Special Processing Machinery
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CNC Molybdenum Wire Electrical Discharge Machine 'HB 600'

Revised and redesigned each part from the conventional machine. We pursued ease of use, high precision, and high reliability!

The "HB 600" is a CNC molybdenum wire electrical discharge machine that employs high-precision, high-response Japanese-made servo motors and servo amplifiers on the XYUV axis. It achieves space-saving with a simple structure that eliminates waste and a rational layout. The orientation, height, and angle of the monitor can be freely adjusted. Ohno Seiko handles the "CNC Molybdenum Wire Electrical Discharge Machine" as the exclusive distributor of Sanko Technology in Japan. 【Features】 ■ Uses a Japanese-made servo system, offering excellent durability and precision ■ The cover of the machining table is designed to be adjustable ■ Raising the cover prevents the splashing of cutting fluid ■ Each part has been reviewed and redesigned from conventional machines ■ Pursues ease of use, high precision, and high reliability *For more details, please refer to the PDF document or feel free to contact us.

Company：大野精工機工販売事業部
Price：Other

Special Processing Machinery
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Processing height Z500! Large workpiece wire electrical discharge machining machine 'HB 800'

Our independently developed electroless power supply technology suppresses electrolytic corrosion and prevents the formation of softened layers on the processed surface!

The "HB 800" is a CNC molybdenum wire electrical discharge machining (EDM) machine that brings together the technology developed over the years in discharge machining to achieve excellent processing performance. The running path of the molybdenum wire can be selected from one of two routes depending on the presence of a wire guide. The guide rollers and wire electrodes are all the same, making replacement easy. Ohno Seiko handles the "CNC Molybdenum Wire EDM Machine" as the exclusive distributor for Sanko Technology in Japan. 【Features】 ■ Uses a Japanese-made servo system, offering excellent durability and precision ■ The cover of the processing table adopts a liftable design ■ Raising the cover prevents the splashing of cutting fluid ■ Each part has been reviewed and redesigned from conventional machines ■ Pursues ease of use, high precision, and high reliability *For more details, please refer to the PDF materials or feel free to contact us.

Company：大野精工機工販売事業部
Price：Other

Special Processing Machinery
Electric discharge machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric discharge machine Product List and Ranking from 85 Manufacturers, Suppliers and Companies | IPROS GMS

Electric discharge machine Manufacturer, Suppliers and Company Rankings

Electric discharge machine Product ranking