Fluorine resin coating Product List and Ranking from 78 Manufacturers, Suppliers and Companies

Case Study of Problem Solving with Fluororesin Coating: Heat Exchanger

Prevention of decreased thermal efficiency, reduction of cleaning time and effort! It is possible to lower running costs.

Heat exchangers (plate type, tube type) require regular cleaning because sludge adheres to their surfaces over time, reducing thermal conductivity. Previously, we would stop the factory line and hire an external contractor to spend an entire day removing sludge. Additionally, the sludge was as hard as stone, and we had to use wooden mallets to break it off, which often led to deformation or damage to the heat exchangers. By applying a fluoropolymer coating to impart non-adhesive properties, we were able to reduce cleaning time to 2-3 hours, making it easy to remove sludge. This has resulted in reduced working hours and effort, and the heat exchangers are no longer damaged. 【Effects】 ■ Reduction in man-hours due to shorter cleaning time ■ Decreased labor for cleaning tasks ■ Prevention of damage to heat exchangers during cleaning ■ Reduced sludge adhesion, preventing a decline in thermal efficiency *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Heat exchanger
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of Problem Solving with Fluororesin Coating: Heat Welding Heater

Reduction of man-hours enables cost savings and stable production! Improvement of yield through thread drawing.

A heater used for thermal welding of resin (contact type) is provided with a fluororesin coating on the surface to impart release properties, preventing resin stringing. This makes it difficult for the melted resin to stick, eliminating the need for a release agent application process, and if there are subsequent processes, the removal of the release agent is also unnecessary. This enables a reduction in labor costs and stable production. Performance and durability may vary depending on the type of resin used and the operating temperature, so please consult us. 【Effects】 ■ Improvement of yield due to stringing ■ Simplification of heater cleaning tasks ■ Increase in productivity *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Resin processing machine
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study on Problem Solving with Fluororesin Coating: Gasket

Numerous achievements in the coating of mass-produced items such as automobiles! Provides slip resistance and wear resistance.

By applying a fluororesin coating to the gasket (rubber material) of the automobile's gasoline cap, we achieve smooth opening and closing while maintaining gas sealing properties, as well as wear resistance against the opening and closing operation and the ability to follow the expansion and contraction of the rubber. Stable quality and supply through automatic painting robots. Depending on the material, fluororesin coatings can also be applied to rubber and resin parts, and we have numerous achievements in coating mass-produced items such as automobiles. We will design processes suitable for various purposes, shapes, and materials. 【Features】 ■ Stable quality and supply through automatic painting robots - Ensures accuracy and uniformity of film thickness and surface roughness - Supports mass production ■ Paint development - Improves flexibility, elasticity, and adhesion of the coating film *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Rubber
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Problem Solving Case] Radiator Cap Component (Negative Pressure Valve)

Introducing fluororesin coating for harsh operating environments where coolant fluid comes into direct contact!

We would like to introduce a case where we solved a problem by applying a fluororesin coating to the radiator cap component (negative pressure valve), which provided non-adhesive properties. The coolant liquid previously used, which contained a non-amine-based rust inhibitor, had issues such as damaging the main pressure valve (rubber) and causing the negative pressure valve (SUS) to seize. This led to the coolant liquid being unable to move between the reserve tank and the radiator during low temperatures, resulting in overheating and causing damage or rupture to the radiator. After hearing about these issues from the customer, our company selected the coating. We utilized the non-adhesive properties of the fluororesin to prevent the fixation of the main pressure valve and the negative pressure valve. 【Improvement Effects】 ■ The coating no longer peels off ■ Prevented seizing *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Rubber
stainless
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] Challenges and Countermeasures for the Adoption of CFRP <ADLON Coat>

Coating is also possible on CFRP substrates! Challenges and countermeasures for adopting carbon fiber reinforced plastics are discussed.

This document introduces the challenges and countermeasures related to the adoption of CFRP (Carbon Fiber Reinforced Plastic). It lists various issues such as "inability to achieve continuous production (high cost)," "need for specialized molding techniques," and "handling of epoxy binders." Additionally, it provides detailed solutions through coatings and information about the filament winding molding method. We encourage you to read it. [Contents] ■ Challenges ■ Solutions ■ Benefits of Solutions ■ Filament Winding Molding Method *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] New grade of surface treatment for compressed superchargers: <ADLON Coat>

Effects of engine downsizing and fuel efficiency! Introducing a new grade of surface treatment.

This document explains surface treatment for superchargers. It includes sections such as "Coating a supercharger with ADLON L-RK200" and "Coating a turbocharger with ADLON." The coating on turbochargers is expected to reduce the adhesion of carbon and oil contaminants contained in exhaust gases, as well as stabilize the clearance with the wheel. Please feel free to download and take a look. 【Contents】 ■ Coating a supercharger with ADLON L-RK200 - Expected effects ■ Coating a turbocharger with ADLON - Expected effects *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] What can be achieved with fluororesin coating on automotive parts?

Featuring engine systems, body systems, etc.! Supporting lightweight design, downsizing for high output, and ECO initiatives.

This document introduces what can be achieved with fluororesin coatings for automotive parts. It includes body components such as "diaphragms" and "flanges," as well as engine components like "timing belts" and "superchargers," and powertrain components. It supports lightweighting, downsizing for high output, and ECO initiatives. Please feel free to download and take a look. [Contents] ■ Body components ■ Powertrain components ■ Engine components *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] New Grade of Surface Treatment for Sliding: <ADLON Coat>

Reduce engine load and improve fuel efficiency! Examples such as piston skirts are also introduced!

This document presents a new grade of surface treatment for sliding applications. By adopting ADLON L-RS100 for engine pistons, skirt sections, and head sections, we introduce the expected effects and examples, accompanied by photos and illustrations. The adoption is expected to yield various benefits such as "improved engine performance," "enhanced combustion efficiency," and "reduced engine load," leading to better fuel economy. Please feel free to download and take a look. 【Contents】 ■ Expected Effects ■ Examples *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] For fluoropolymer coatings, choose FluoroCoat.

We provide a coating film that maximizes the properties of fluororesin! Let's solve challenges together.

Fluorocoat Co., Ltd. is a specialist in fluoropolymer coatings. This document provides a detailed explanation of "What is fluoropolymer coating?" Additionally, we showcase various coating achievements, such as "professional-grade frying pans" and "escalator side panels," along with photographs. Our company can propose coating specifications tailored to our customers and provide coating films that maximize the properties of fluoropolymers. Please feel free to download and take a look. [Contents] ■ What is fluoropolymer coating? ■ Let's solve challenges together ■ For example, in such places... *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Processing Contract
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] Fluororesin Coating

Surface treatments used for home appliances and cooking utensils! An explanation of the types, performance, and examples of applications of fluororesin coatings.

This document introduces "fluororesin coatings." It categorizes surface treatments referred to as "fluorocoat," used in home appliances, cooking utensils, exterior painting of automobiles and buildings, and cavity prevention, based on their materials. It explains the types, properties, processing methods, and examples of applications related to fluororesin paints. This document serves as a useful reference when considering implementation, so please take a moment to read it. 【Contents】 ■ Introduction ■ About fluororesins ■ About fluororesin coatings ■ About fluororesin paint systems ■ About modified fluororesin paint systems ■ About processing processes ■ Conclusion *For more details, please refer to the PDF document or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] Overview of Fluoropolymer Coating

A technical document that systematically explains the types, characteristics, processing methods, and applications from home appliances to the space industry.

This document is a white paper introducing the types, functions, and application examples of fluoropolymer and fluoropolymer coatings. It explains the development of fluoropolymers, key characteristics, category classifications, specifications for PTFE, PFA, and PFEP coatings, specifications for ETFE, ECTFE, and PVDF coatings, and processing methods. Additionally, it also discusses PFAS, which has been a topic of social concern in recent years. [Contents (partial)] ■ Introduction ■ About fluoropolymers ■ About fluoropolymer coatings ■ About fluoropolymer paint systems ■ About modified fluoropolymer paint systems *For more details, please download the PDF or feel free to contact us.

Company：フロロコート
Price：Other

Coating Agent
Fluorine resin coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Director's Blog] The Importance of Primer - Determining the Invisible Undercoat Lifespan -

The Importance of Primer - The Invisible Undercoat Determines Longevity - Part 7

In fluororesin coatings, it is easy to focus only on the topcoat (the upper layer) that is visible on the surface. However, in reality, the primer that connects the substrate and the fluororesin layer, in other words, the undercoat, is extremely important. Coating defects tend to be perceived as "the topcoat is bad" because they appear on the surface. However, if you trace the cause... This time, our research director explains the importance of primers. Please take a look. https://www.fluorocoat.co.jp/importance-of-primers/ Also, please download information about our fluororesin coating brand ADLON.

Company：フロロコート
Price：Other

Other semiconductor manufacturing equipment
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High durability fluoropolymer coating "Thermo Pro Release"

Fluororesin coating ideal for use in high-temperature environments, such as hot melt bonding and hot pressing.

Thermo Pro Release is a high-durability, high-release fluororesin coating originally developed by Nikken Coating Industry. It demonstrates excellent release properties and durability even in high-temperature environments above 200°C, preventing resin adhesion and thread pulling during thermal welding and thermal riveting processes. With our unique evaluation technology, we can propose the optimal coating specifications tailored to the customer's usage environment (temperature range, type of resin, etc.). It also excels in abrasion resistance and adhesion, lasting longer than conventional fluororesin coatings. This reduces the effort required for mold cleaning and maintenance, contributing to improved production efficiency and reduced maintenance costs!

Company：日建塗装工業
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is PFA coating? Features and applications.

High-reliability fluoropolymer coating PFA understood from the differences with PTFE.

PFA is a fluoropolymer that has been improved based on PTFE, characterized by maintaining basic properties such as non-stickiness, heat resistance, and chemical resistance, while also exhibiting excellent flowability during melting. This difference in flowability allows for a more uniform spread of the coating during application, resulting in a dense and smooth surface. Due to this feature, while PTFE is prone to pinholes and voids, PFA can achieve a coating with fewer defects, making it suitable for applications that require higher reliability. It is particularly valued for its long-term protective performance in chemical and high-temperature environments. We also support the evaluation of the applicability of PFA coatings, comparisons with other materials, and prototype assessments. For optimal specifications tailored to your applications and conditions, please feel free to contact us for technical consultations and prototype verifications.

Company：日建塗装工業
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Selecting Fluororesin Coatings by Application!

A clear explanation of the optimal materials according to their intended use.

Fluororesin coatings require different optimal materials depending on their applications. For release applications in food and resin processing, PTFE, which excels in non-stick properties, is suitable. On the other hand, PFA is effective in environments with strong acids or strong alkalis, as well as in the semiconductor field where high purity is required. FEP is often chosen for corrosion resistance and non-stick applications in moderate temperature ranges, while ETFE demonstrates superiority in durability in environments subject to wear and impact. By organizing the required characteristics for each application, optimal coating selection becomes possible. Our company supports everything from specification considerations based on actual usage environments and component conditions to prototype evaluations. For optimal material selection tailored to on-site challenges, please feel free to contact us for technical consultations and prototype testing.

Company：日建塗装工業
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The lifespan of hot rivet jigs increased by up to 20 times! High-durability fluororesin coating.

Durability increased by 5 to 20 times! Reduces resin stringing and adhesion, improving yield! Exceptional release properties and overwhelming wear resistance drastically reduce maintenance costs.

In the "thermal staking process" for the manufacturing of precision optical devices and resin components, issues such as appearance defects caused by resin stringing and resin debris sticking to jigs, as well as frequent jig replacements and downtime due to early wear of conventional release coatings, have become significant challenges. ■ High-Durability Fluoropolymer Coating "Thermo Pro Release" This surface treatment solution combines excellent release properties and heat resistance with robust film characteristics that withstand harsh thermal cycles and physical loads. Compared to conventional fluoropolymer coatings, it dramatically enhances adhesion to the substrate and wear resistance, maintaining release performance for extended periods even at high temperatures. ■ Implementation Effects - Overwhelming Longevity Durability has significantly improved by 5 to 20 times compared to conventional coatings from other manufacturers. - Operational Performance Jigs that had a limit of 300 shots can now operate non-stop for 4,000 shots, and jigs with a limit of 2,000 shots can now reach up to 20,000 shots. - Cost Reduction By reducing the frequency of jig replacements and the costs of re-coating and spare management, total maintenance costs are significantly cut.

Company：日建塗装工業
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Preventing substrate adhesion! Fluororesin coating for slitter rolls.

[Food Sanitation Law Compliance] Eliminates the sticking and chocolate stoppages of highly adhesive dough! With excellent blade release, it improves yield and dramatically reduces cleaning time.

This is a surface treatment solution for metal "slitter rolls" used in the manufacturing lines of food products such as cookies, biscuits, bread, and noodles, which cuts and divides sheet-like dough into a consistent width. We apply fluoropolymer coatings such as PTFE and PFA, which have the highest level of non-stick properties (release properties), to highly adhesive dough. Using our unique precision technology, we create a uniform and smooth coating on the blade edges, roll grooves, and fine steps, effectively preventing the adhesion and sticking of sticky dough containing moisture, oil, sugar, and gluten. 【Benefits of Implementation】 ■ Prevention of chocolate stoppages and stable operation Our excellent release properties eliminate problems caused by dough sticking to the blade edges or being drawn in, preventing line stoppages (downtime) and improving operational efficiency. ■ Improved yield and stable quality Smooth separation from the blade prevents pulling and deformation during cutting, achieving uniform product dimensions and reducing defect rates. ■ Reduction in cleaning and maintenance time By preventing sticking and adhesion, cleaning tasks become easier, significantly shortening cleaning time. We will propose the optimal fluoropolymer specifications according to the dough characteristics (hardness, adhesiveness) and the usage environment.

Company：日建塗装工業
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin coating

I recommend this when you want to give various materials slip and non-stick properties!

We offer a variety of options to meet requests such as wanting greater corrosion resistance and conductivity, depending on applications in fields like kitchen and industrial sectors.

Company：日本化材
Price：Other

Chemicals
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【English Market Research Report】Global Market for FEVE Fluoropolymer Coatings

"Free samples" are currently being offered! Please check the application method from the [PDF download] button, or apply directly through the related links.

The FEVE fluoropolymer coating market is expected to grow to 440.82 million USD from 2023 to 2028, with a CAGR of 5.36% during the forecast period. This report includes a comprehensive analysis of the FEVE fluoropolymer coating market, market size and forecasts, trends, growth drivers, challenges, and vendor analysis covering approximately 25 vendors.

Company：グローバルインフォメーション
Price：100,000 yen-500,000 yen

Other services
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft's 【Blue Armor】 (Corrosion-Resistant Coating)

Protect your materials from various corrosive chemicals and gases! Shine Kogei's top-class corrosion-resistant coating, Blue Armor!

Blue Armor Coating is a coating technology specialized in corrosion resistance among the various coatings offered by Shine Kogei. It is capable of forming a thick, pinhole-free film that prevents the penetration of all types of chemical solutions, gas permeation, and metal ion leaching. Leveraging its excellent corrosion resistance, it contributes to solving 'corrosion problems' across a wide range of industries, including reaction vessels for chemical purification, cleaning equipment for semiconductors, and wafer trays for liquid crystals. ◆ Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating costs.

Company：シャイン工芸
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin coating Shine solves your problems!

Discover the excellent properties of fluororesin coatings, and Shine Craft will solve your problems!

The characteristics of fluoropolymer resin include "non-stick" properties that make it difficult for things to adhere, a "low friction coefficient" that allows for easy sliding, "electrical properties" such as anti-static and electrostatic prevention, "heat resistance" that allows for use in a wide range from 260°C to -260°C, "non-wettability" that repels water and oil, and "chemical resistance" that prevents erosion by chemical solutions. Additionally, materials that can be coated with fluoropolymer resin include various metals such as aluminum, iron, stainless steel, copper, and brass, as well as a variety of other materials like glass, ceramics, rubber, and plastics. We are also increasing our processing achievements with materials that have been difficult to process in the past, such as silicone rubber, ceramics, and plastics, by using our special undercoating treatment. There may still be a chance for "that material" you were about to give up on. ◆ Regarding Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft's 【Blue Armor】 Features (Corrosion-Resistant Coating)

For resolving corrosion troubles, definitely use Shine's Blue Armor Coating!

The blue armor coating film prevents the penetration of all chemical liquids, gas permeation, and metal ion elution! It has strong adhesion to materials, allowing for processing of complex and irregularly shaped materials! The film has high tensile strength, making it usable even in a full vacuum environment! After coating, the film can also be cut, improving dimensional accuracy! If there are pinhole-sized scratches, on-site construction is possible! Utilizing many features, it protects your materials under severe corrosion conditions. ◆ Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Processing Contract
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft's 【Rubber Coating】

Why not utilize fluororesin coating on various rubber materials? It is effective in preventing stickiness and noise in rubber materials!

A rubber coating that has been adapted for low-temperature firing, which is normally associated with high-temperature sintering fluoropolymer coatings. The rubber coating is a highly flexible coating material that follows the elasticity of the rubber material. It primarily serves to improve sliding properties and release properties, but it is also effective in preventing stickiness and noise in rubber materials! It can be widely used for O-rings, valve seals, gaskets, diaphragms, automotive rubber parts, vibration and sound insulation sheets, conveyor belts, and more. ◆ Regarding Inquiries ◆ When making an inquiry, it would be helpful if you could provide the following information for a smoother process. 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft [Fluororesin Coating for Rubber]

Improved functionality with a rubber-specific 'fluororesin coating'!!

Conventional fluoropolymer coatings require shot blasting and high-temperature curing, making it difficult to process rubber. However, with Shine Kogei's special coating technology, "Rubber-Specific Fluoropolymer Coating," it is possible to form a fluoropolymer film on rubber without damaging the material. By applying the coating, the unique tackiness of rubber can be eliminated, leading to improved sliding properties. Additionally, other physical properties can be imparted. This allows for the replacement of expensive materials like silicone rubber and fluororubber with more affordable rubber. ◆ Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, sliding properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating purposes.

Company：シャイン工芸
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Prevent corrosion of the liquid medicine tank! Shine's fluororesin coating.

Attention pharmaceutical and hospital personnel! Utilizing the chemical resistance of fluoride coatings against strong acids to prevent corrosion of chemical tanks. *Case studies available.

Shine's Blue Armor demonstrates remarkable barrier properties (corrosion resistance) under temperature conditions ranging from -196°C to 178°C. We encourage you to use the Blue Armor coating, which possesses excellent characteristics for your various facilities. Please use this before contamination from chemicals and gases causes losses to your company, both in terms of time and finances! 【Challenge】 Problematic area: The chemical storage tank, part of the pharmaceutical manufacturing equipment, was at risk of corrosion and contamination. Customer: A raw material manufacturer. 【Solution】 ◆ Coated the pharmaceutical manufacturing equipment of the raw material manufacturer with fluororesin coating (Blue Armor). ↓ ↓ ↓ ◆ Prevented corrosion of the chemical storage tank (equipment maintenance) and contamination with a fluorine coating that has chemical resistance to strong acids.

Company：シャイン工芸
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft: Wear-resistant Cerarmor and Corrosion-resistant Blue Armor

High functionality provided by ceramic coating (release properties, wear resistance)

◆Ceramic Coating "Sera Armor"◆ Shine Kogei's "Sera Armor" is a coating that imparts properties such as abrasion resistance, release properties, and heat resistance to materials. It possesses physical properties superior to fluororesins and can form a high-hardness ceramic coating on resins, engineering plastics, glass, and wood that are typically difficult to process. 【Sera Armor Coating Properties List】 1. Abrasion Resistance (Pencil Hardness 9H) 2. Release Properties 3. Slipperiness 4. Heat Resistance 5. Water and Oil Repellency 6. Insulation 7. Corrosion Resistance 8. Rust Prevention 9. Dirt Resistance 10. Antibacterial Properties 11. Far Infrared Effect, etc… ◆Inquiries◆ When making an inquiry, it would be helpful to provide the following information for a smoother process: 1. Nature of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick properties, chemical resistance, slipperiness, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating costs.

Company：シャイン工芸
Price：Other

Surface treatment contract service
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin lining

Resin lining is characterized by its ability to create a thicker film compared to conventional coatings.

We offer "resin lining construction" for various materials. "Resin lining" is characterized by its ability to create a thicker formed film, unlike conventional coatings. By lining parts with fluororesin in highly corrosive chemical transport lines, which cannot be handled by standard metal piping, we enhance corrosion resistance. Unlike coatings, this method uses sheet-like materials, making it fundamentally less prone to pinholes. [Features] ■ It is a method with a high degree of difficulty, but skilled workers perform the processing. ■ Corrosion resistance is improved by lining with fluororesin. ■ Fundamentally, this method is less prone to pinholes. *For more details, please refer to the PDF document or feel free to contact us.

Company：太陽フロロ
Price：Other

Processing Contract
Surface treatment contract service
Piping Materials
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating the inner surface of a very thin pipe.

Add characteristics with high-performance coating! Coating of the inside of injection needles and nozzles is now possible!

Our company provides coating for the inner surfaces of ultra-fine pipes. Coating the insides of injection needles and nozzles, which has been difficult until now, is now possible. We can accommodate inner diameters of 0.5mm or less and add properties with high-performance coatings. Additionally, we support various types of films, including fluororesin and ceramics. Please contact us for inquiries. 【Features】 ■ Coating for the insides of injection needles and nozzles is possible ■ Can accommodate inner diameters of 0.5mm or less ■ Adds properties with high-performance coatings ■ Supports various types of films, including fluororesin and ceramics *For more details, please refer to the PDF document or feel free to contact us.

Company：沢平
Price：Other

Processing Contract
Other laboratory equipment and containers
others
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fujii Resin Industry Co., Ltd. Business Introduction

We will continuously improve the quality management system and strive to strengthen our management foundation.

Fujirein Co., Ltd. has been a pioneer in corrosion-resistant technology using polymer materials (plastics), consistently providing advanced products and contributing to environmental conservation in Japan's industrial sector through corrosion lining/coating. With our original technology and experience, we consider it our mission to provide new corrosion-resistant technologies, passionately focusing on themes proposed by our clients, striving to solve problems with a spirit of being the best partner, and building trust. 【Business Activities】 ○ Construction of synthetic resin linings ○ Design and manufacturing of reinforced plastic (FRP) equipment ○ Design, manufacturing, and sales of synthetic resin lining materials For more details, please contact us or download our catalog.

Company：冨士レジン工業
Price：Other

Resin mold
Resin processing machine
plastic
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rust prevention coating

European standards in Japan!

There are various types of anti-corrosion coatings, including Dacromet, Geomet, Magnacoat, Raspcoat, and Disgo, among others. Additionally, if we include plating, the number of types extends to several dozen. The Delta Coat that we recommend has the following advantages: - Environmentally friendly, chrome-free anti-corrosion paint compliant with RoHS and ELV directives - A thin layer of zinc coating that is not electrically based - Compliant with European EU standards - Does not cause hydrogen embrittlement - Less prone to liquid pooling Although its recognition in Japan is still low, it has become the standard in Europe, with more than half of car manufacturers adopting Delta Coat.

Company：グローバル・コーティング第一工場
Price：Other

Other machine elements
Fluorine resin coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine resin coating Product List and Ranking from 78 Manufacturers, Suppliers and Companies | IPROS GMS

Fluorine resin coating Manufacturer, Suppliers and Company Rankings

Fluorine resin coating Product ranking