Level Sensors Product List and Ranking from 46 Manufacturers, Suppliers and Companies

Waterproof cap type "Waterproof pin terminal and waterproof crimp sleeve"

Shut out water with a waterproof cap! Introducing IP57 pin terminals and crimp sleeves!

This product is a waterproof cap type "Waterproof Pin Terminal and Waterproof Crimp Sleeve." The waterproof cap allows for the exclusion of water. The waterproof performance and safety code is IP57 (IEC529). Additionally, a "heat shrink type" is also available. 【Specifications (excerpt)】 ■ Rated Voltage: 300V ■ Flame Retardancy: UL94V-2 ■ Insulator Operating Temperature Range: -40℃ to +105℃ ■ Waterproof Performance Safety Code: IP57 (IEC529) *For more details, please refer to the PDF document or feel free to contact us.

Company：ニチフ
Price：Other

Other electronic parts
Other cable related products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmentally Friendly Insulated Crimp Sleeves *Compliant with ROHS 10 Substances

Smooth confirmation of the wire insertion status through the large window. Excellent electrical insulation properties, compliant with ROHS 10 substances.

The "Environmentally Friendly Insulated Crimp Sleeve" is a type B sleeve that connects wires by crimping them together from both directions. It features a transparent color with two windows, allowing for easy confirmation of the wire insertion status. Made from non-halogen materials (polycarbonate), it does not produce toxic halogen gases or corrosive gases during combustion. 【Features】 ■ Complies with ROHS 10 substances ■ Excellent electrical insulation with a rated voltage of 600V ■ Usable at temperatures ranging from -40°C to 125°C ■ Easy confirmation of wire insertion status *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

Company：ニチフ
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vibration Sensor/Vibration Transmitter Series 4-162

The vibration sensor is a robust general industrial accelerometer that provides a 4-20mA output proportional to various vibration ranges in RMS velocity units.

The 4-162 type vibration velocity sensor is a compact and robust general industrial accelerometer (acceleration converter) that provides a 4-20mA output proportional to various vibration ranges in RMS velocity units.

Company：パシフィックテクノロジー
Price：Other

Vibration Testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Use Case 1] Simply wrap a sensor around the gauge tube to monitor the liquid level.

It is a sensor that can linearly detect the liquid level inside the gauge tube simply by wrapping a film-like electrode around the outside of the gauge tube.

It is an electrode made of flexible transparent film, allowing for completely different uses compared to conventional sensors. Have you ever experienced a situation where the contents unexpectedly ran out and the process came to a halt? In addition to linear level display, it is also possible to set up to four control outputs. For more details, please refer to the catalog. *Demo units are available for free rental.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Liquid level control/level switch

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-contact liquid level detection with millimeter precision!! Liquid level sensor

A liquid level sensor that can linearly detect the liquid level inside a container to the millimeter level simply by attaching a film-like electrode to the outside of a non-metallic container (such as resin)!

This is a capacitive liquid level sensor that can linearly detect the internal liquid level simply by attaching a film-like electrode to the outside of non-metallic containers (made of resin or glass) or gauge tubes. - The electrode is transparent, allowing for visual confirmation. - Since it is a film-like electrode, it can be wrapped around pipes or adhered to curved surfaces. *For more details, please download the catalog or feel free to contact us.*

Company：亀岡電子
Price：10,000 yen-100,000 yen

Liquid level control/level switch

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-contact linear detection of liquid level!! Micro-capacity detection specification with a detection length of 40 millimeters.

Mini-sized liquid level sensor ideal for φ10 test tubes. It can be installed on curved or flat surfaces with flexible materials.

Mini size electrodes of the CLA series! Capable of detecting liquid level ranges from 0 to 40 mm. Can be installed in φ10 dispensers, test tubes, beakers, and viewing windows of tanks.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat-resistant and chemical-resistant liquid level sensor specifications *Sample available for loan

Heat resistance temperature of 100℃! While maintaining the functionality of the standard product, the heat and chemical resistance of the electrode part has been improved. *Demo units are available for loan.

The "Heat-Resistant and Chemical-Resistant Liquid Level Sensor" is suitable for managing levels of high temperatures and chemical liquids. While maintaining the functions of the standard model, the heat and chemical resistance of the electrode section has been improved. FEP is used for the cable, and fluororubber is used for the sealing part. 【Features】 ■ Ideal for managing levels of high temperatures and chemical liquids ■ Heat resistance temperature: 100℃ ■ FEP used for the cable, fluororubber used for the sealing part ■ Protection structure: IP-63 *For more details, please refer to the external link page or feel free to contact us.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-contact linear detection! Capacitive liquid level sensor with micro-capacitance detection specifications.

"Micro-capacity detection distance of 40 millimeters" allows for linear detection of the liquid level inside the container simply by attaching a film-like sensor to the outside of the container. It can also be wrapped around pipes.

The "Liquid Level Sensor Micro Capacitance Detection Specification" captures even minute changes of 10pF without missing them. In the absence of external influences such as temperature changes, capacitance changes below 10pF can also be measured. It is capable of detecting micro capacitance levels for scientific analysis equipment and cartridge remaining levels for dispensers. 【Features】 ■ Mini size suitable for test tubes and similar applications ■ Capable of measuring capacitance changes below 10pF ■ Micro capacitance level detection for scientific analysis equipment ■ Detection of cartridge remaining levels for dispensers ■ Operating temperature range: 0 to 40℃ *For more details, please refer to the external link page or feel free to contact us.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Liquid level control/level switch

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Liquid level sensor pipe-type electrode specifications! Linear detection with a resolution of less than 1 millimeter.

No moving parts! It allows for liquid level detection simply by being immersed in the liquid.

The "Liquid Level Sensor Pipe-Type Electrode Specification" allows for level management simply by immersing it in the liquid. Its structure has no moving parts, eliminating issues of false detection caused by clogging. It is suitable for slurry liquids such as waste liquids. 【Features】 ■ Structure with no moving parts ■ Eliminates false detection issues caused by clogging ■ Ideal for slurry liquids such as waste liquids ■ Usable in metal tanks *For more details, please refer to the external link page or feel free to contact us.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[CLA Case] Coolant Liquid Overflow Management [Bearing Manufacturing]

Using the liquid level sensor "CLA"! Introducing a case study on coolant overflow management! *Sample available for loan.

We would like to introduce a case of coolant overflow management in the bearing manufacturing process using the non-contact liquid level sensor "CLA," which can be installed in various tanks due to its electrodes being suitable for PET film. The bearing manufacturer was using an ultrasonic type, but faced challenges due to its high cost and the difficulty of installation. Therefore, they adopted the "CLA pipe type." After implementation, it can be easily installed by tightening with a nut on the top of the tank. With a contact type and IP-68 certification, it can manage the liquid level at four points even when directly in contact with the liquid, allowing for device control to match the liquid level as needed. [Current Challenges and Requests] - In the bearing manufacturing process, they manage the liquid level of the coolant used and oversee overflow. - They were using an ultrasonic type, but faced challenges due to its high cost and the difficulty of installation. *For more details, please refer to the PDF document or feel free to contact us.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[CLA Case] Rubber Material in Metal Hopper (Inventory Management) [Powder and Granule Detection]

Using the liquid level sensor "CLA"! Here is a case study on managing the remaining rubber pellets in a metal hopper.

We would like to introduce a case study on managing the remaining amount of rubber material in a metal hopper using the non-contact liquid level sensor "CLA," which can be installed in various tanks due to its electrodes being suitable for PET films. A manufacturer of extrusion molding faced issues where materials ran out due to oversight and mistakes in visual checks, resulting in defective products and damages, including repair time. They also encountered problems with ultrasonic sensors, which caused malfunctions, leading to unnecessary line stoppages and reduced productivity. Therefore, they adopted the "CLA." After implementation, by managing the rubber material at any desired position, the sensor emits a signal when the rubber material reaches the set level, automatically stopping the device and notifying through a beacon light, thus preventing the occurrence of defective products due to material shortages. [Current Issues and Requests] ■ Managing the remaining amount of rubber material in the hopper visually through a window - Oversight and mistakes in visual checks led to material depletion, resulting in defective products and damages, including repair time. - Ultrasonic sensors caused malfunctions, leading to unnecessary line stoppages and reduced productivity. *For more details, please refer to the PDF document or feel free to contact us.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[CLA Case] Liquid Tank (Dilute Sulfuric Acid) Level Detection [Semiconductor Equipment Related]

Using the liquid level sensor "CLA"! It can detect and output the liquid level position with analog output, allowing for linear liquid level management!

We would like to introduce a case of level detection in a chemical tank using the non-contact liquid level sensor "CLA," which can be installed in various tanks due to its electrodes being compatible with PET film. (Detection substance: dilute sulfuric acid) For companies related to semiconductor equipment, when they want to change the liquid level management position, there is a hassle of reattaching the sensor. They faced the challenge of not knowing the liquid level position due to point-based liquid level management. Therefore, they adopted the "CLA." As a result, by allowing the liquid level detection position to be set at four points as desired, there is no need to change the sensor position. Additionally, with analog output, the liquid level position can be detected and output, enabling linear liquid level management. 【Current Issues and Requests】 ■ Currently, four capacitive sensors are installed for liquid level management. ■ Liquid level management changes depending on the liquid and operating conditions. ■ They want to monitor the liquid level position linearly. ■ When they want to change the liquid level management position, there is a hassle of reattaching the sensor. ■ Due to point-based liquid level management, they do not know the position of the liquid level. *For more details, please refer to the PDF document or feel free to contact us.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Liquid Level Sensor Example] Detection of Remaining Epoxy Resin [Carbon Fiber]

Using the liquid level sensor "CLA"! Here is a case study on detecting the remaining amount of epoxy resin. *Sample units are available for loan.

We would like to introduce a case study on detecting the remaining amount of epoxy resin using the non-contact liquid level sensor "CLA," which can be installed in various tanks due to its PET film electrodes. A carbon fiber company faced challenges in managing the liquid volume in their epoxy resin tank. The current sensor (guide pulse method) could not detect when the liquid volume was low, and the accuracy of liquid level management was poor, with a precision of 3-5mm instead of the desired ±1mm. As a solution, they adopted the liquid level sensor "CLA-D10P40." As a result, they were able to detect the liquid level with the required accuracy of ±1mm, allowing them to manage the liquid level by installing the sensor at the desired position, even when the liquid volume was low. [Current Challenges and Requests] - Challenges arose in managing the liquid volume in the epoxy resin tank. - The current sensor (guide pulse method) cannot detect when the liquid volume is low. - The accuracy of liquid level management is poor, with a precision of 3-5mm instead of the desired ±1mm. *For more details, please refer to the PDF document or feel free to contact us.*

Company：亀岡電子
Price：10,000 yen-100,000 yen

Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[CLA Case] Hydraulic Cylinder Oil Level Management [Automotive Parts and Machinery Industry]

Using the liquid level sensor "CLA"! We will introduce a case study on managing the oil level of hydraulic cylinders. *Sample units are available for loan.

We would like to introduce a customized case of the non-contact liquid level sensor "CLA," which can be installed on various tanks due to its electrodes being suitable for PET film. The oil level management of hydraulic cylinders is currently done visually, but the sensors are located on the back side of the equipment, making it necessary to "1. go around to the back to check, 2. check areas that are hidden by the equipment, and 3. manage numerous locations that are difficult to confirm." This led to our request. Therefore, we installed the liquid level sensor "CLA-D10P40." With an accuracy of ±1mm for the desired liquid level, we can detect the liquid level, allowing us to manage it by placing the sensor at the position of the desired liquid level, even when the liquid volume is low. 【Current Issues and Requests】 ■ The oil level management of hydraulic cylinders is done visually, but the sensors are located on the back side of the equipment. - It is necessary to go around to the back to check. - Areas are hidden by the equipment and cannot be seen. - There are many locations that are difficult to confirm. ■ We want to monitor with sensors and raise the management level. ■ Other sensors are not easy to install. *For more details, please refer to the PDF document or feel free to contact us.

Company：亀岡電子
Price：10,000 yen-100,000 yen

Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CLS (Capacitance Type Liquid Level Switch Multi-Point Output Type)

We can propose the automation and monitoring system within the factory using our level sensor products!

Kameoka Electronics Co., Ltd. offers integrated production tailored to customer needs, covering product development design, parts procurement, production planning, manufacturing (including board assembly), and shipping for various types of sensors. Additionally, we support improvement proposals for equipment using level sensors. If you have applications where you want to avoid contact with the target object or require non-destructive testing, please feel free to consult us. ■ Case Study: Example from a printing peripheral equipment manufacturer Before implementation, there were concerns about sensor degradation with contact types, and it was difficult to predict when failures would occur. Therefore, by installing a non-contact CLS on the outside of the tank, we achieved non-contact management of the liquid level of the defoamer. *We also have examples of solving mounting issues through modifications of standard electrode products. For more details, please refer to the PDF materials or feel free to contact us.

Company：亀岡電子
Price：Other

Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Level Sensors Product List and Ranking from 46 Manufacturers, Suppliers and Companies

Level Sensors Manufacturer, Suppliers and Company Rankings

Level Sensors Product ranking