Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
121～150 item / All 252 items
Tabletop xenon weathering test machine.
It is a tabletop xenon light resistance testing machine. It is ideal for testing small quantities of samples such as pharmaceuticals, paper, cosmetics, chemicals, food, and stationery.
High-grade type of lightfastness test for fibers.
The ultraviolet auto-fade meter is widely used for light resistance testing and evaluation of everyday items, including textile products, architectural interior materials, and writing instruments. The ultraviolet carbon arc lamp as a light source has powerful energy in the ultraviolet region (around 388nm) and operates at a rated voltage of 135V and 16A. With Suga's unique discharge voltage and current control, it provides excellent test reproducibility with a stable spectral irradiance distribution.
Reproducing paint scratches caused by flying stones.
This is a testing device that simulates damage to a car's paint and brake tubes caused by stones while driving. There is a standard temperature type for testing at room temperature and a low-temperature type for testing at low temperatures.
The exposure angle is fixed and of the direct type.
This is a stand that directly exposes samples to sunlight and the natural environment. The exposure angle is fixed.
Adopts an independent power supply with a maximum of 50 channels! Insulation reliability testing and evaluation testing equipment.
This is an evaluation testing device capable of performing insulation reliability tests at high voltages for up to 50 channels. ◆Features◆ ◇High voltage output up to 3000V Enables evaluation of high voltage devices. ◇Independent power supply Even if one sample shorts, other samples can continue testing. ◇Multi-channel, up to 50 units Allows evaluation of up to 50 samples in one housing, significantly improving the efficiency of device evaluation. ◇Special measurement cables resistant to harsh environments By using Teflon-coated cables, tests can be conducted by directly inserting the cables into a constant temperature and humidity chamber. *For more details, please inquire through a request for materials or download.
High-precision analog measurement circuits can detect minute changes from the early stages of the test cycle!
The "RTm-100 Series" is a device that measures the contact resistance of circuit patterns, solder joints, and more with high speed and high precision. The high-performance measurement circuit of this series accurately captures changes in contact resistance below a milliohm, and when combined with a heat shock chamber, allows for data measurement linked to temperature cycles. Furthermore, the high-speed scanning function using semiconductor relays can adequately follow tests with short cycle times, ensuring that the timing of measurements does not deviate for each cycle. 【Features】 ■ Achieves high-speed data measurement of up to 50 msec/CH ■ Improved measurement accuracy with the adoption of semiconductor relays ■ Noise reduction through dedicated measurement circuits and cables ■ AC/DC measurement with multi-current sources ■ Modular structure for easy maintenance * For more details, please refer to the PDF materials or feel free to contact us.
Case studies of hardness tests to ensure the quality of critical components related to passenger car safety.
The "Hardness Testing Examples" introduces essential cases of hardness testing that are crucial for ensuring the quality of important components related to safety, such as engine components of passenger cars and other body, electrical, and electronic components. We conduct tests on approximately 30,000 items in total, including about 7,000 engine components, around 10,000 drive, transmission, and control components, and approximately 13,000 other body, electrical, and electronic components. [Test Content] ■ Engine components: surface hardness, internal hardness, hardened layer depth, material hardness ■ Drive, transmission, and control components: surface hardness, internal hardness, hardened layer depth ■ Other body, electrical, and electronic components: surface hardness, internal hardness, hardened layer depth *For more details, please refer to the PDF document or feel free to contact us.
Easily create test patterns! Testing equipment equipped with humidity control function.
The "Orion3" is a test system that can simulate electrostatic discharge phenomena caused by device charging. It is equipped with humidity control functionality and can conduct ESD (CDM) tests compliant with various standards by exchanging the test head. It allows for easy creation of test patterns for any device, minimizing cycle time. 【Features】 ■ Test equipment with humidity control functionality ■ Conducts tests compliant with various standards by exchanging the test head ■ Easily creates test patterns for any device ■ Minimizes cycle time ■ The new feature CDM2 enables a new type of CDM testing that significantly improves the repeatability issues associated with the conventional air discharge method *For more details, please refer to the PDF materials or feel free to contact us.
Our company conducts environmental testing, including temperature and humidity combination (cycle) tests, as well as temperature and humidity tests based on customer-specified conditions.
1. Overview of JIS C 60068-2-38 Test: - JIS C 60068-2-38 specifies a temperature and humidity combination (cycle) test method that primarily accelerates the degradation of electrical and electronic components under high temperature and high humidity as well as low temperature conditions. The aim is to induce defects in the test samples through respiration rather than moisture absorption. - This test differs from other temperature and humidity cycle tests by intensifying the rigor of the test as follows: ◇ A high number of temperature fluctuations within the specified time ◇ A wide range of temperature changes ◇ A rapid rate of temperature change ◇ Inclusion of temperature cycles below 0 degrees ▼ For more details, please download the PDF document (recommended). ▼ For urgent inquiries, please contact us using the 'Contact Us' section below.
Achieving a low-cost, space-saving ESD tester!!
In recent years, with the miniaturization of devices, there has been a demand for improved ESD tolerance. Therefore, Hanwa Electronic Industry Co., Ltd. has developed a portable electrostatic discharge (ESD) testing device that is easy to operate. This device also has a leakage measurement function, allowing for ESD failure assessment to be conducted solely with this device. 【Features】 ○ Easy operation with a touch panel ○ Compatible with various standard waveforms ○ Leakage measurement function ○ HBM Fast/Slow unit (optional) For more details, please contact us or download the catalog.
We support domestic and international standard tests for the replacement of discharge circuit units.
The compact ESD tester "HCE-5000" is a highly reliable device that complies with standards in Japan and overseas (JEITA/ESDA/JEDEC standards). It supports domestic and international standard testing through unit replacement of the discharge circuit. It is capable of measuring the capacitance of each terminal of the device. Measurement data can be saved as text files. 【Features】 ○ Temperature and humidity control using nitrogen ○ Compatible with various device shapes ○ Equipped with an automatic waveform acquisition system ○ Measurement movable range (80mm × 200mm) ○ Applied voltage range: 0 to +/-4000V (+/-5V step) For more details, please contact us or download the catalog.
This device also has the function of pressurizing helium, conducting a leak test on the test specimen, and recovering the helium into a storage tank. It can maintain high-purity helium through vacuum pumping.
This device can pressurize helium and perform airtight testing on test specimens. After the airtight test, it also has the function of recovering helium into a storage tank. Additionally, since it uses a vacuum pump for evacuation, the recovered helium can be reused while maintaining its purity. The air-driven pump used in the device is compact and allows for easy maintenance of the high-pressure components.
Some overseas manufactured parts and products may have quality issues. We provide quality evaluation services for reliability testing and assessment for these.
Some overseas manufactured parts and products may initially operate without issues, but can cause malfunctions and lead to failures and breakdowns in a short period of time. Before adopting or using overseas products, please consider AIT's parts and product quality evaluation services. ■ Examples of overseas parts evaluation - Reliability evaluation during the parts procurement and selection stage - Comparative evaluation between parts and product manufacturers - Reliability evaluation when replacing current parts with alternative parts (cost reduction) ■ Examples of applicable parts - Active components (transistors, diodes, thyristors, etc.) - Passive components (capacitors, resistors, etc.) - LCDs - Circuit boards - Power supplies - Etc.
Reliable application with the contact confirmation function of the applied pin! Compatible with direct charging method and electric field induction method.
The "ESD (CDM) Testing Contract Service" evaluates the resistance to damage caused by ESD (Electrostatic Discharge) according to device charging models, which are important for the reliability of semiconductor products and electronic components that include them. It supports both the Direct Charge Method (Direct CDM) and the Field Induced Method (Field Induced CDM). Additionally, it is possible to determine damage through diode characteristic evaluation methods and other characteristic assessments (using separate equipment). 【Features】 ■ Compatible with various standard conditions such as JEDEC, JEITA (EIAJ also acceptable), and AEC through unit exchange ■ Supports both the Direct Charge Method (Direct CDM) and the Field Induced Method (Field Induced CDM) ■ Also compatible with the Direct Charge Method and Field Induced Method of AEC-Q100-011 ■ Damage determination is also possible through diode characteristic evaluation methods and other characteristic assessments ■ Ensures reliable application through contact confirmation function of applied pins *For more details, please refer to the PDF document or feel free to contact us.
From DUT board production to testing! We propose and conduct tests according to your requests and objectives.
The "ESD (HBM・MM) Testing Service" evaluates the resistance to damage caused by ESD using the Human Body Model and Machine Model, which are important for the reliability of semiconductor products and electronic components that include them. We accommodate products such as IC modules, semiconductor products, and subsystems with up to 512 pins. We conduct tests in accordance with major domestic and international standards such as ESDA/JEDEC, JEITA, AEC, and IEC. Additionally, if there are issues with resistance, we assist in problem-solving, including failure analysis and root cause investigation. 【Features】 ■ Supports products such as IC modules, semiconductor products, and subsystems with up to 512 pins ■ Partial support for products with more than 512 pins (consultation required) ■ Conducts tests in accordance with major domestic and international standards such as ESDA/JEDEC, JEITA, AEC, and IEC ■ Proposes and conducts tests tailored to customer requests and objectives ■ Assists in problem-solving, including failure analysis and root cause investigation, if there are issues with resistance *For more details, please refer to the PDF document or feel free to contact us.
Not only the joints of electronic components, but also the evaluation of fixed parts such as screws!
At AITES Co., Ltd., we conduct "Thermal Shock Testing." By repeatedly exposing samples to high and low temperatures, not only does stress occur due to thermal effects, but also due to the expansion and contraction of various parts. Repeated stress also adds to the overall stress. This test is conducted not only for the joints of electronic components but also for evaluating fixed points such as screws. 【Main Specifications of the Thermal Shock Testing Equipment】 ■ Internal dimensions: W650×H460×D370mm, Temperature range: -65 to 0/+60 to 200℃ ■ Internal dimensions: W650×H460×D670mm, Temperature range: -65 to 0/+60 to 200℃ ■ Internal dimensions: W970×H460×D670mm, Temperature range: -65 to 0/+60 to 200℃ *For more details, please refer to the PDF document or feel free to contact us.
Weather Resistance Test
By changing the conditions of ultraviolet irradiation from carbon arc discharge, as well as the temperature, humidity, and water spray inside the chamber, it is possible to conduct accelerated testing of degradation that occurs due to outdoor use of products, parts, and materials, which takes a long time in nature.
From small parts like screws and bolts to narrow surfaces of large gears! We offer a wide range of support.
Simply place it on the measurement area, and the results are displayed prominently on the monitor, making it easy to operate. It adopts the UCI method, allowing for the setting of test force and conversion to multiple hardness scales. *For more details, please refer to the catalog available for download below under "PDF Download." You can also request a quote through "Contact Us." Feel free to reach out.
Measure the conduction resistance of circuit patterns, solder joints, etc., quickly and accurately!
The "RTm-100 Series" is a multi-channel conductive communication reliability evaluation device manufactured by J-RAS Corporation. It measures contact resistance in circuit patterns, solder joints, and more with high speed and precision. With a scan processing time of 50 milliseconds per channel, it can keep up with high-speed cycle testing even for multi-channel measurements. It employs semiconductor relays for the four-terminal network switching in linked channel scans, significantly improving long-term reliability compared to mechanical relay systems. Additionally, the compact housing can be expanded to accommodate up to 240 channels, allowing for flexible installation and easy mobility. It can also connect thermocouples for temperature data display and recording (optional). 【Features】 ■ High precision and high-speed measurement ■ High-speed scanning at 50 msec/channel: follows high-speed heat shock chambers ■ High precision & low noise: reliable data output ■ Four-terminal measurement cables: twisted pair / color-coded by channel ■ High reliability: does not use mechanical relays *For more details, please refer to the PDF document or feel free to contact us.
High-speed detection circuits with a few tens of nsec installed in all channels! Tester capable of low-noise measurement.
The "HVUα Series" is a high-voltage insulation reliability evaluation device manufactured by J-RAS Corporation. It is equipped with high-speed detection circuits capable of operating in the tens of nanoseconds across all channels, enabling more advanced reliability testing. It can detect partial discharge with a high-speed event measurement function of less than 100 nanoseconds. Each channel has its own power supply and individual control, allowing for different applied voltage settings across all channels. There are no mechanical relay scans, so there are no failures or troubles during continuous testing. Active guarding with triaxial cables enables low-noise measurements. 【Features】 ■ Detects partial discharge with a high-speed event measurement function of less than 100 nanoseconds ■ Each channel has its own power supply and individual feedback for stable voltage application to each sample ■ Individual short-circuit detection circuits for each channel can respond to instantaneous sample short circuits ■ Dedicated software allows for graph display and data recording ■ The system can be configured in units of five channels according to demand *For more details, please refer to the PDF document or feel free to contact us.
This one device measures both transmission and reflection, quickly assessing imaging properties. Long-lasting VI-LED light source.
The "ICM-2" is an imaging measurement device that measures the clarity of images reflected on the surfaces of objects, such as painted surfaces, and the sharpness of images that can be viewed through transparent films and plastics. It supports three conditions for transmission and reflection measurements (45°, 60°) with a single unit. The position and angle of the sample stage and the light receiver can be switched easily and accurately. Additionally, it can be operated and display measurement results using dedicated software for computers (compatible with Windows 11). 【Features】 ■ Significantly reduces measurement time (PAT.) ■ Compatible with both transmission and reflection ■ Long-lasting VI-LED light source ■ Operable from a computer *For more details, please download the PDF or feel free to contact us.
Ethanic Colonia series focused on stable performance, ease of use, and safety.
The "COLONIA series" temperature and humidity test chamber inherits the high flexibility that received high praise in the first generation, while also enhancing key features such as: ● Adoption of an LCD panel in the controller to strengthen monitoring functions ● Expansion of temperature and humidity control range ● Extension of effective space in the test chamber. Additionally, the unitized design, which improves the level of completion within the factory before shipment, achieves both a reduction in on-site construction days and an improvement in quality. It is equipped with specifications optimal for testing finished products such as televisions, AV products, automotive parts, and office automation equipment. Of course, a comprehensive assembly, installation, and maintenance service system is also well established overseas. For more details, please download the catalog.
The model 1100-CDM can easily and accurately perform CDM testing (induced charging and direct charging) for ICs.
The CDM test device is a testing apparatus that measures the reliability of electronic components in cases where the metal electrode parts of charged electronic components come into contact with external metals, or when the metal in contact with a charged object (such as the human body) touches the metal electrodes of the electronic components, resulting in stress caused by extremely rapid charge movement. For more details, please contact us or download the catalog.
Low cost, lightweight, and low contact resistance! We aimed to create products that consider the environment and contribute to a sustainable society.
"PPAB" is an aluminum busbar with excellent characteristics manufactured by Nippon Light Metal Co., Ltd. It simultaneously achieves low cost and weight reduction while equipping the various functions required of a busbar. It contributes to improved energy efficiency through weight reduction and ensures a sustainable supply of inexpensive products using aluminum, which is abundant in resources. Additionally, by using recyclable materials, it can reduce waste emissions. 【Features】 ■ Aluminum is approximately 50% lighter than copper (based on conductivity) ■ Suppresses the increase in contact resistance due to aging ■ Low cost: Aluminum is stable and cheaper compared to copper ■ Flexible connectivity ■ Achieves low cost through a hoop-type continuous process from material to plating and pressing *For more details, please refer to the PDF document or feel free to contact us.
Numerous achievements in the creation of tumor-bearing animals using various cultured cells!
At Mediridge Co., Ltd., we conduct tumor engraftment confirmation based on literature and experimental protocols. We can accommodate various requests, including drug administration experiments using generated animals, tumor passage (in vivo or in vitro), and ELISA measurements using serum. We also offer a contract service for various animal testing. Please feel free to contact us. 【Features】 ■ We accept tumor cell lines, implant them in mice, and confirm tumor engraftment. ■ We listen to customer requests and propose suitable protocols. ■ We conduct tests in accordance with laws and guidelines regarding animal welfare. ■ Animal husbandry is carried out in an SPF environment. *For more details, please refer to the PDF document or feel free to contact us.
![[Proposal for Custom Processing and Contract Services] Extraction and Cleaning](https://image.mono.ipros.com/public/product/image/c66/2000370589/IPROS1480088334002489.jpg?w=280&h=280)
Extraction tests conducted using a supercritical carbon dioxide testing apparatus!
At Aitec Co., Ltd., we conduct contract testing using a multi-use CO₂ testing machine, including anhydrous and solvent-free extraction tests. We utilize supercritical carbon dioxide to extract active ingredients from raw materials for health foods, pharmaceuticals, fragrances, and more. Since carbon dioxide vaporizes, a drying process is unnecessary. It is also used for cleaning semiconductors and other applications. Our testing has been successfully implemented in various industries, including national and public universities, national research institutions, food manufacturers, and pharmaceutical manufacturers. We conduct thorough discussions with our clients to propose testing plans that meet their needs. Tests are carried out at our research facility in Osaka, and client attendance is possible. If you have anything else you would like to test in a supercritical CO₂ environment, please feel free to consult us. 【Details of Contract Testing】 ■ Anhydrous and solvent-free extraction tests for active ingredients in pharmaceuticals, herbal medicine, etc. ■ Anhydrous and solvent-free cleaning tests for precision machinery, wafers, etc. ■ Drug penetration tests into porous structural substrates ■ Various drying tests ■ Various dyeing tests *For more details, please refer to the PDF materials or feel free to contact us. *You can download the "Proposal Sheet" from the link below.
Dimensions 1200W × 600D × 1800H, weight approximately 200kg! Introduction of the supercritical CO2 extraction lab testing machine.
The "C-2.0/C-2.0-S1" is a supercritical CO2 extraction laboratory testing machine. The "extraction vessel" has a volume of 2000ml (inner diameter φ80mm), a design pressure of 29.9MPa (operating pressure 27MPa), and a design temperature of 140℃ (operating temperature 130℃). The device is designed in a skeleton specification without a cover. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 <Utilities> ■ Power supply: Single-phase 200V 30A (main unit), Single-phase 100V 8A (chiller unit) ■ Dimensions (reference): 1200W × 600D × 1800H ■ Weight (reference): Approximately 200kg *For more details, please refer to the PDF document or feel free to contact us.
For exhaust gas purification, photocatalysts, fuel cells, etc.! Cube-shaped organic modified particles and unmodified particles.
We would like to introduce our "Cerium Nanoparticle Powder" developed using our supercritical technology. The particle size is about 10 nm, and there are both organically modified and unmodified particles. The organically modified ones are cube-shaped, and the modifier is alkyl carboxylic acid (mainly with 6 carbon atoms), which improves the compatibility with hydrophobic resins. Additionally, the unmodified ceria is obtained by removing the modifier from the organically modified ceria, exposing the ceria surface. 【Features】 ■ Particle size is about 10 nm, with both organically modified and unmodified particles ■ Organically modified - Cube-shaped - Improved compatibility with hydrophobic resins ■ Unmodified - Obtained by removing the modifier from organically modified ceria - The ceria surface is exposed *For more details, please refer to the PDF document or feel free to contact us.
■Easy measurement for anyone■Hardness testing machine for paper and film rolls
◆◇◆ Sample experiments and demo unit rentals available ◆◇◆ The FTS-Roll Tester1 is a "hardness testing machine for paper and film rolls" that employs the rebound method. In the conventional "tapping method" (where the surface of the roll is struck and the sound is heard by the inspector), there was a heavy reliance on the inspector's intuition, making it impossible to manage quality quantitatively. The FTS-Roll Tester1 allows even those without measurement experience to operate it easily and obtain accurate inspection results. The inspection results are quantified based on a unique principle, aiding in quality management. The FTS-Roll Tester1 is the latest successor model developed by re-evaluating the functions of the Palotester. Our company also offers repair services for the Palotester.
No need for sample cutting and polishing work, enabling speedy measurements.
◆◇◆Sample experiments and on-site demonstrations available◆◇◆ 【Features】 ● Measures hardened layer depths from 0.5mm to 2.5mm. ● No variation in measurement values due to individual differences. ● Measurement time is only 60 seconds (depending on test force). ● No need for cutting or polishing samples as in traditional methods. ● In addition to hardened layer depth, hardness distribution in relation to test force can be obtained. ● Custom machines can be manufactured according to sample specifications.
