Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
1～29 item / All 29 items
Operates on USB bus power, equipped with transmit and receive LEDs for each RS-232C port (manufactured by TITAN).
- Operates with FTDI drivers - Equipped with transmit and receive LEDs for each port to indicate communication status - Simultaneous communication on all ports possible with USB bus power only - Lightweight and robust plastic housing - Compliance standards: RoHS, CE, FCC
IEEE488 USB-compatible GPIB controller
◾Simple GPIB connectivity for laptop computers ◾API support with NI-488.2 driver software ◾Full compliance with IEEE 488.1 and 488.2 ◾Fully compatible with the industrial standard VISA library ◾No GPIB cable required ◾Plug & Play compatible interface; GPIB cable required for device connection ◾USB 2.0 compatible ◾Maximum GPIB transfer speed: 1.2 MB/s
Isolated USB Digital I/O Module
◾Hi-Speed USB 2.0 interface ◾Programmable digital filter removes unexpected glitches from input channels ◾Programmable DO/Relay initial status ◾32CH isolated digital input & 2CH counter (USB-7230) ◾8CH relay output & 8CH isolated digital input & 2CH counter (USB-7250) ◾2-CH frequency/event counters (USB-7230/7250) ◾Up to 2500 VRMS isolation voltage ◾Includes test application (U-Test)
High-maintenance USB & terminal block wiring! Supports 921.6kbps, fixed serial number model also available for selection.
The ULI-351/361 (terminal block) is an industrial USB to RS-485 converter that allows you to add an RS-485 port to a USB port. It supports USB 2.0 (12Mbps) and serial communication at a maximum of 921.6kbps. It features a high-retention USB Type B connector, which helps prevent cable disconnection in environments with vibrations. Designed for terminal block connections, it is suitable for control panels and field wiring, and it is easy to install inline. The ULI-351 series supports 4-wire RS-485, while the ULI-361 series supports 2-wire RS-485. Additionally, the ULI-351TK and ULI-361TK models come with fixed serial numbers, allowing multiple PCs to share the same model number while maintaining consistent COM port numbers. It is powered by USB bus power, eliminating the need for an external power supply, and comes with a 0.9m USB cable.
![ULI-351T_03----20231107165250[1].jpg](https://image.mono.ipros.com/public/product/image_sub/b05/2001560805/IPROS1469842323169049403.jpg?w=280&h=280){kind=small}
![ULI-351T_01----20231107165247[1].jpg](https://image.mono.ipros.com/public/product/image_sub/b05/2001560805/IPROS9438937670530144685.jpg?w=280&h=280){kind=small}
This is a super compact OEM-compatible USB 2.0 memory. pSLC and OP settings are available.
OEM support allows for fixed BOM and fixed F/W. NAND uses TLC, but it is possible to set F/W (pSLC 5% Mode) to the same write endurance (P/E cycle) as MLC, and also increase write speed with pSLC (pseudo SLC). Let’s explain using the STU16GPCS (a 16GB TLC product) as an example. 1. pSLC 5% Mode A portion of the 16GB capacity in TLC is used for Pseudo SLC and Over-provisioning. It has a write endurance equivalent to MLC (3,000 cycles) at 3,260 cycles, with a capacity of 90% of TLC (14.4GB). 2. Full pSLC Mode The entire area of TLC is converted to Pseudo SLC. It has a write endurance of 30 times that of TLC (1,000 cycles), reaching 30,000 cycles, with a capacity of one-third of TLC (5.3GB). Mode 1 can be used as a substitute for MLC products. The exterior metal case is waterproof and shock-resistant, making it suitable for a wide range of applications.
This is an OEM-compatible USB 3.0 memory.
OEM support allows for fixed BOM and fixed F/W.
USB flash drive duplicator
The USB Pantera series is a copier (duplicator) that allows you to easily copy and erase data on USB flash drives (USB memory). Each port operates independently, and adding more connected USB drives does not decrease the execution speed. It supports various file systems and can be used for copying, erasing, and backing up. It has been renewed from previous models and now supports not only USB flash drives (USB memory) but also USB portable 2.5-inch HDDs/SSDs.
This is an accessory specifically for the USB RFI System-Level Test, newly added in April 2021.
Luxshare-ICT, Speedtech, and Lab105 fixtures will be handled by Toki Tsusho. According to the USB Implementers Forum Inc.'s released USB 3.2 RFI System-Level Test Procedure (Ver. 1.4), this TEST applies to: ● USB 3.2 Host End Products (This includes embedded hosts) ● USB 3.2 Hubs End Products ● DRD (Dual Role Device) and targets USB products with a Type-C connector that support 5Gbps or higher. The equipment list includes 11 items, but Toki Tsusho can prepare 8 items (products from Luxshare-ICT, Speedtech, and Lab105), excluding the analyzer and RF cables.
The output type is USB Type A! The output voltage/current is 5V 1.0A and 5V 2.0A.
We would like to introduce the 'C24 SAW06B' handled by Shino American Japan Co., Ltd. This product is a USB charger with output type USB Type A, with output capacities of 5W and 10W. The standards are PSE/UL/CCC. Additionally, the output voltage/current is 5V 1.0A and 5V 2.0A. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Output Capacity: 5W, 10W ■ Output Voltage/Current: 5V 1.0A, 5V 2.0A ■ Output Type: USB Type A ■ Standards: PSE/UL/CCC *For more details, please download the PDF or feel free to contact us.
A compact and lightweight module designed for easy integration into projects and products.
This product is an ultrasonic sensor with a detection zone of up to 5 feet and can use more than 8 sensors simultaneously. It features an easy-to-use USB interface that connects directly to a computer using a standard Micro-B USB cable. It detects objects within the calibrated detection zone and reports when an object (such as a person) enters the detection zone. The target is released when it leaves the USB-ProxSonar-EZ detection zone. 【Features】 ■ Detection zone of up to 5 feet ■ Can use more than 8 sensors simultaneously ■ Equipped with a USB interface ■ Detects when entering the calibrated detection zone ■ Released from detection when leaving the detection zone *For more details, please refer to the external link or feel free to contact us.
TP322610 Beagle USB 5000 v2 Ultimate Protocol Analyzer for USB 3.0 Specification
The manufacturer Total Phase of the Beagle USB 5000 series is a regular participant in USB Compliance Tests. As participants know, they have been enhancing the quality of their products by testing various devices from different companies each time. Thanks to advancements in semiconductor technology, they achieved high performance at about half the price of conventional models, and began selling their products worldwide in November 2010. The EZ-USB FX3 (CYUSB3014) universal USB 3.0 controller announced by Cypress in April 2011 revitalized a market that had stagnated due to the lack of dedicated devices and limited applications. At Tachinodenko, we recommend the Beagle USB 5000 for users adopting (including planned) the CYUSB3014. A bundled sale with the Cypress EZ-USB FX3 DVK CYUSB3KIT-001 (currently in stock) is also possible. In September 2012, we released the v2 series, which allows the use of USB 3.0 for connection with analysis PCs. This added high-speed transfer and the ability to synchronize clock levels across multiple analyzers.
The USB Power Delivery Analyzer USB-PDA is a professional tool that allows for custom application development in addition to the included GUI.
The performance of Total Phase's USB-PDA, highly regarded as a USB Power Delivery analyzer, is not limited to decoding the CC line of USB PD3.0 or simple voltage/current measurement functions. Since it is designed to be inserted in the middle of the signal line, it is carefully designed to minimize impact on high-speed communication, resulting in a very small size. Although the specifications do not mention its use on a 20Gbps communication line, its small size is advantageous. The included GUI software is available for Windows, Linux, and Mac (including M1 models). It not only displays data sequentially while capturing a large amount of it in host memory but also allows for live searching and filtering during capture. This GUI software, Data Center, is also used with Total Phase's Beagle USB Analyzer, Beagle I2C/SPI, as well as Komodo CAN Analyzer and Promra eSPI Analyzer. For debugging rare events or for integration into inspection devices, there is the advantage of being able to create custom applications using the API.
Operates on USB bus power, equipped with send and receive LEDs for each RS-232C port (manufactured by TITAN).
- Operates with FTDI drivers - Equipped with transmit and receive LEDs for each port to indicate communication status - Simultaneous communication on all ports possible with USB bus power only - Lightweight and sturdy plastic housing - Compliance standards: RoHS, CE, FCC
USB 3-2-1 Raven 3124 extends USB 3.1/2.0/1.1 up to 200m using fiber optic cables.
Extends USB3.1 devices up to 200m with multi-mode fiber optic cable (OM3) Equipped with a 4-port USB3.1 hub that fully supports USB3.1/USB2.0/USB1.1 devices USB3.1 (5Gbps), USB2.0 (480Mbps), USB1.1 (12Mbps) Includes a 100Mbps Ethernet port (LAN pass-through) ExtremeUSB compliant
4CH 24Bit 128kS/s A/D conversion
◾Maximum sampling rate of 128kS/s ◾High-resolution 24-bit Sigma-Delta ADC ◾4-channel simultaneous sampling analog input ◾Hi-Speed USB 2.0 interface ◾Supports 2mA excitation output on each analog input channel for IEPE sensor measurement ◾Full auto-calibration
4CH 24Bit 2kS/s A/D conversion DAQ module
◾Maximum sampling rate of 2kS/s ◾High-resolution 24-bit 4-channel simultaneous sampling analog input ◾Hi-Speed USB 2.0 interface ◾Built-in signal conditioning circuit for high voltage/current/thermocouple/RTD/strain gauge/load cell measurements ◾Includes test application
USB 8CH 12Bit 500kS/s Continuous Sampling A/D Conversion D/A Conversion Multi-Function
◾Supports USB 1.1 interface ◾12-bit A/D resolution ◾Maximum sampling rate of 500 kS/s ◾8-channel differential input ◾4-CH simultaneous sampling capability ◾Onboard 4 K-sample A/D FIFO ◾Bipolar and unipolar analog input range ◾Programmable gain of 0.5x, 1x, 2x, 4x, 8x
This is a USB 3.0 memory with built-in RAM disk creation software. Data is synchronized with the USB memory and safely stored.
The USB memory with USB 3.0 interface has the following features: * Built-in RAM Disk creation software * The contents of the created RAM Disk are saved to the synchronized USB 3.0 memory * Achieves high-speed access with sequential read speeds exceeding 4,000 MB/sec and write speeds exceeding 5,000 MB/sec * Supported OS: Windows XP/Vista/Win7 * For Mac OS and Linux versions, please inquire. (Under development) * You can take the RAM Disk and connect it to other PCs for work.
This is a USB 3.0 memory with built-in data retention utility software for USB memory. Refreshes degraded files.
The USB memory with a USB 3.0 interface has the following features: * You can use your existing USB memory or USB SSD by inserting it into this Data Retainer. * Built-in data retention utility software. * The data retention period is refreshed. * Maintains the write durability of your USB drive. * Prevents data degradation over time. * Also functions as an 8GB USB 3.0 drive.
Stylish stand-type USB port
【65W USB Charger】 - Maximum fast charging: 100W - Can charge a MacBook Air with M2 chip to 100% in 1.5 hours - Supplies 100W simultaneously to phones, tablets, laptops via three USB-C ports and one USB-A port. A dynamic temperature sensor monitors temperature, and an intelligent PMW chip adjusts power output to protect devices. High-quality rated shell and heat dissipation design ensure safe charging at night. - Compatible with MacBook Pro, MacBook Air, iPad series, iPhone 14/13/12 series, Galaxy S22/S21 series, Dell XPS, Google Pixel series, and more! - Charge all devices within reach simultaneously, manage cable clutter, and save desktop space.
USB interface that supports everything from setting device parameters in the PROFIBUS network to plant maintenance and production data acquisition.
It has a compact design but features a powerful PROFIBUS interface. It easily connects to a PC via a USB cable and is powered through USB, eliminating the need for an external power supply. It is equipped with advanced hardware that supports a PROFIBUS connector for direct connection to the PROFIBUS segment. Device parameter settings can be configured using FDT/DTM, and it integrates with many parameter setting systems and asset management systems. With PBproUSB, it is easy to connect a PC-based measurement and monitoring system to the PROFIBUS network. PROFIBUS connections can be established quickly and easily for applications such as SCADA and MES.
The specifications are PSE/UL/EU/UK/AU! The output type is USB Type-C, and the output capacity is PD 20W.
We would like to introduce the USB Charger 'C2101' handled by Shino American Japan Co., Ltd. The output voltage/current is 5V 3.0A, 9V 2.22A, and 12V 1.67A, and the output type is USB Type-C. Additionally, the standards are PSE/UL/EU/UK/AU. Please feel free to contact us if you have any requests. 【Specifications】 ■ Output capacity: PD20W ■ Output voltage/current: 5V 3.0A, 9V 2.22A, 12V 1.67A ■ Output type: USB Type-C ■ Standards: PSE/UL/EU/UK/AU *For more details, please download the PDF or feel free to contact us.
USB Type-C with code! Output capacity is PD30W, and the standards are PSE/UL/EU/UK/AU.
We would like to introduce the USB Charger 'C1802' handled by Shino American Japan Co., Ltd. The output type of this product is USB Type-C and it comes with a cable. The output capacity is PD30W, and the standards are PSE/UL/EU/UK/AU. Additionally, the output voltage/current supports 5V 3.0A, 9V 3.0A, 12V 2.5A, 15V 2.0A, and 20V 1.5A. 【Specifications】 ■ Output Capacity: PD30W ■ Output Type: USB Type-C (with cable) ■ Standards: PSE/UL/EU/UK/AU *For more details, please download the PDF or feel free to contact us.
Flexible wireless communication is possible with BLE+USB! By using commercially available USB, the certification acquisition costs for different radio laws in various countries can be reduced!
The BLE+USB Entry Pack is an SDK for using our μC3-BLE Stack with Grapesystem's GR-USB host driver in a BLE-compatible USB adapter type Bluetooth module. Since certification under the Radio Law is not required, it also supports the commercialization of products that incorporate BLE communication. 【Features】 Achieve BLE communication at low cost ■ No Radio Law certification required You can use commercially available BLE-compatible USB adapters (BLE 4.0/5.0) that have already obtained certification, so obtaining the Radio Law certification logo is unnecessary. ■ Sample provided for smartphones BLE samples are included that can be verified with a commercially available evaluation board + BLE-compatible USB adapter (Android). ■ Compatible with commercially available BLE-compatible USB adapters You can use BLE 4.0 and 5.0 USB adapters that are generally available for purchase. The μC3-BLE Stack has confirmed operation up to BLE Ver. 4.2, and updates are planned to be released as needed in the future. #eForce #Wireless #BLE #USB #IoT #Embedded #SDK #Sensor #Smartphone
Output voltage/current is 5V 2.4A! Output type is USB Type A, and output capacity is 12W.
We would like to introduce the 'C25 SAW12G' handled by Shino American Japan Co., Ltd. This product is a USB charger with an output type of USB Type A, an output capacity of 12W, and complies with PSE/UL/CCC standards. Additionally, the output voltage/current is 5V 2.4A. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Output capacity: 12W ■ Output voltage/current: 5V 2.4A ■ Output type: USB Type A ■ Standards: PSE/UL/CCC *For more details, please download the PDF or feel free to contact us.
The output voltage/current is 5V 3.0A + 5V 2.4A, 9V 2.22A, 12V 1.67A!
Introducing the USB Charger 'C2202' handled by Shino American Japan Co., Ltd. This product features two output types: USB Type-C and USB Type-A, with an output capacity of PD20W. The output voltage/current specifications are 5V 3.0A + 5V 2.4A, 9V 2.22A, and 12V 1.67A. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Output Capacity: PD20W ■ Output Voltage/Current: 5V 3.0A + 5V 2.4A, 9V 2.22A, 12V 1.67A ■ Output Type: 2 Outputs (USB Type-C, USB Type-A) ■ Standards: PSE/UL/EU/UK/AU *For more details, please download the PDF or feel free to contact us.
The output voltage/current supports 5V 3.0A, 9V 3.0A, 12V 3.0A, 15V 3.0A, and 20V 2.25A!
Introducing the USB Charger 'C1803' handled by Shino American Japan Co., Ltd. The output types of this product are USB Type-C and USB Type-C with a cable. The standards are PSE/UL/EU/UK/AU. Additionally, the output voltage/current supports 5V 3.0A, 9V 3.0A, 12V 3.0A, 15V 3.0A, and 20V 2.25A. 【Specifications】 ■ Output capacity: PD45W ■ Output types: USB Type-C, USB Type-C (with cable) ■ Standards: PSE/UL/EU/UK/AU *For more details, please download the PDF or feel free to contact us.
The output type is USB Type-C with a Type-C cable! The standards are PSE/UL/EU/UK/AU.
Introducing the USB Charger 'C1804' handled by Shino American Japan Co., Ltd. The output voltage/current of this product supports 5V 3.0A, 9V 3.0A, 12V 3.0A, 15V 3.0A, and 20V 3.25A. Additionally, the output capacity is PD65W, and the standards are PSE/UL/EU/UK/AU, with the output type being USB Type-C. 【Specifications】 ■ Output Capacity: PD65W ■ Output Type: USB Type-C, USB Type-C (with cable) ■ Standards: PSE/UL/EU/UK/AU *For more details, please download the PDF or feel free to contact us.
The output voltage/current is 5V 3.0A, 9V 3.0A, 12V 3.0A, 15V 3.0A, and 20V 5.0A!
We would like to introduce the USB Charger 'C2304' handled by Shino American Japan Co., Ltd. The output types of this product are USB Type-C and USB Type-C with a cable, and the standards are PSE/UL/EU/CCC. Additionally, the output voltage/current is 5V 3.0A, 9V 3.0A, 12V 3.0A, 15V 3.0A, and 20V 5.0A. Please contact us if you have any requests. 【Specifications】 ■ Output capacity: PD100W ■ Output types: USB Type-C, USB Type-C (with cable) ■ Standards: PSE/UL/EU/CCC *For more details, please download the PDF or feel free to contact us.
