Work Robot Product List and Ranking from 169 Manufacturers, Suppliers and Companies

Industrial Router RX220 with LTE Multi-Carrier Compatible Module

Rooster RX220, IoT/M2M remote management service "SunDMS", LTE multi-carrier, supports autonomous connection maintenance function (ASC).

【Rooster RX220 Features】 ■ Equipped with IoT/M2M remote management service "SunDMS" ■ Compact design ■ Supports LTE multi-carrier (NTT Docomo, SoftBank, KDDI, various MVNOs) ■ Redundant configuration (wired line ⇔ mobile line backup, VRRP function) ■ Achieves low power consumption (approximately 0.3W) during sleep mode ■ Extended temperature range (-20 to 60℃), wide DC power supply (DC5 to 27.4V) ■ Realizes long-term stable operation

Company：Suntex Co., Ltd.
Price：Other

Routers, Switches, and Hubs
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dual SIM Redundant Design 5G Compatible Industrial Router DRX5510

Redundant design with dual SIM support, backup function, VPN function, vehicle compatibility, extended temperature range (operating temperature -20 to +65℃)

Features ■ 5G compatible ■ Equipped with wireless LAN functionality ■ Dual SIM support for redundancy operation ■ Easy installation with built-in antenna ■ Compatible with various VPN functions ■ Rugged design considering in-vehicle use ■ Achieves long-term stable operation ■ High environmental resistance performance ■ Expected to meet the ★1 security compliance evaluation system for IoT products ■ Equipped with IoT remote management service "SunDMS"

Company：Suntex Co., Ltd.
Price：Other

Routers, Switches, and Hubs
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lightweight Robot Travel Axis "7th Axis"

The 7th axis that expands the possibilities of robots.

The sliding axis using the igus slide table (toothed belt drive type) expands the workspace of collaborative robots by up to four times. This significantly enhances design flexibility. The igus sliding axis can be operated and programmed with the UR teaching pendant. ● Stroke length: 500 to 3,000 mm (can be extended up to 6,000 mm upon request) ● Comes with an adapter kit for easy connection to the energy chain system.

Company：イグス
Price：Other

Transport and handling robots
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Collaborative robot 'CR-010B' that makes the automation of bending easier to achieve.

Easily detachable and interchangeable. A collaborative robot for bending machines that allows you to create robot programs without CAM, making the automation of bending easier!

The CR-010B is a collaborative robot for vending machines that detects human entry using a laser scanner and performs deceleration and stopping, allowing for space-saving installation without the need for entry prevention fences. The entire collaborative robot is detachable, so it can be removed when not in use, enabling effective differentiation between human and robot use of the vending machine. Furthermore, it can operate in conjunction with AMNC, allowing for programming without CAM. 【Features】 ■ Detachable and usable in different configurations. Spot automation for small parts processing. ■ Achieves easier bending automation while keeping installation costs low. ■ Creation of robot programs without CAM. ■ Space-saving design. *For more details, please refer to the PDF document or feel free to contact us.

Company：アマダ（アマダグループ）
Price：Other

Other processing machines
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The handheld welder transforms into a welding robot! 'CR-700W'

Automate the handheld fiber laser welding machine! Achieve further improvements in productivity and welding processing quality.

By adding the collaborative robot 'CR-700W' and dedicated software to the Handy Fiber Laser Welding Machine FLW1500MT/MTS, welding operations can be automated. The torch can be easily attached with a dedicated attachment, and the attachment and detachment process can be completed in about 10 seconds with a single touch. For products with a large number of lots, having the collaborative robot perform the welding process can reduce the workload on the operator. The operator can simultaneously handle tasks such as product setup and inspection, thereby improving labor productivity. By using a collaborative robot for welding, high-quality and stable processing can be achieved even during long hours of work. *For more details, please refer to the related links or feel free to contact us.

Company：アマダ（アマダグループ）
Price：Other

Welding Machine
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Ultra-compact vacuum generator!】Compact ejector SCPM series

Achieving top-level suction power with a compact body the size of a business card! A type compatible with energy-saving features and IO-Link communication is also available in the lineup!

The Compact Ejector SCPM series is a space-saving vacuum generator equipped with various functions in a compact body. There are three models available based on functionality, starting with the basic model 'SCPMb' that enables vacuum suction and vacuum release, the 'SCPMc' which includes a display switch capable of showing status monitoring results and energy-saving features, and the high-function model 'SCPMi' that allows for the confirmation of various information such as monitoring results and equipment settings from outside the facility, allowing you to choose according to your application. 【Features】〇 High-efficiency, ultra-compact vacuum generator the size of a business card → Achieves maximum suction power with minimal space 〇 Simplified wiring design → Reduces clutter from cables and eases wiring work 〇 Energy-saving features included (SCPMc / SCPMi) → Equipped with an air-saving function that reduces compressed air consumption by up to 80% 〇 Up to 16 ejectors can be manifolded → Reduces installation labor and connection component costs with simplified wiring and piping.

Company：シュマルツ
Price：Other

Vacuum Equipment
Pneumatic Equipment
Other conveying machines
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fanuc Collaborative Robot CRX Carry Base

A carry base that allows for quick installation with a tool-free level adjuster for movement!

We would like to introduce the carry base for FANUC collaborative robots "CRX-10iA, 10iA/L." Installation is quick as it can be moved using a tool-less level adjuster. The robot controller can also be moved as a single unit. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Compatible models: CRX series [2 models: CRX-10iA or CRX-10iA/L] ■ Weight: 48kg ■ Material: Aluminum alloy (cast and pipe A6063T) ■ Mounting tap: Dedicated tap for 10iA and 10iA/L ■ Control panel bracket: L-shaped stand type ■ Casters: Vibration-reducing silent elastomer swivel casters (4 wheels) *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイドー東京支店
Price：Other

Other industrial robots
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Free Offer] Solve your transportation issues with the "Transportation and Conveyor Problem-Solving Book"

【Latest Linear Conveyor】 High-speed movement at 3m/sec! Work can be done even on the transport line!

The LCM100 is a linear conveyor module developed based on robotic technology. It can be easily expanded by simply connecting additional units, making it a next-generation conveyor that supports flexible line construction and modifications. It can move at high speeds of up to 3m/sec, and work can be performed on the transport line, significantly reducing transport time. We are offering a free set of the LCM100 catalog and a problem-solving book for transport and conveyors! It includes tips for addressing transport and conveyor challenges as well as interviews with the developers of the LCM100. ■ If you are interested, please contact us or download the catalog.

Company：ヤマハ発動機ロボティクス事業部
Price：Other

Other industrial robots
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Yamaha Motor Co., Ltd. Announcement of Participation in the 2023 International Robot Exhibition

Realizing smart factories! Planning to showcase products such as high-speed transport, human collaboration, and support for a variety of types.

Yamaha Motor Co., Ltd. will be exhibiting at the "2023 International Robot Exhibition" held at Tokyo Big Sight. We will showcase the "Linear Conveyor Module LCMR200," which supports a variety of products, and the "7-Axis Collaborative Robot," which enables delicate compliance control. Additionally, we plan to present a demonstration featuring AGVs and AMRs at our booth. We sincerely look forward to your visit. 【Exhibition Overview】 ■ Dates: November 29 (Wed) - December 2 (Sat), 2023 ■ Hours: 10:00 AM - 5:00 PM ■ Venue: Tokyo Big Sight ■ Booth: East Hall 4 E4-18 ■ Address: 3-11-1 Ariake, Koto-ku, Tokyo 135-0063 *For more details, please refer to the related links or feel free to contact us.

Company：ヤマハ発動機ロボティクス事業部
Price：Other

SCARA Robot
Work Robot

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FutureNet Series Catalog

Responding firmly to customer needs and changes in trends! Listing M2M/IoT devices.

The "FutureNet Series Catalog" is the product catalog of Century Systems, which develops and sells its own network product brand and engages in contracted development of network systems. It features a variety of products, including the M2M/IoT router "NXR Series," the "NXR-G100 Series" compatible with KDDI 4G/LTE, and the industrial router "AS-250 Series." [Contents] ■ M2M/IoT Routers ■ Industrial Routers ■ Linux Micro Appliance Servers ■ Industrial PoE Switches ■ Protocol Conversion Boxes *For more details, please refer to the PDF document or feel free to contact us.

Company：センチュリー・システムズ
Price：Other

Routers, Switches, and Hubs
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial LTE Router "R2110-4L Kit"

It is an LTE router with various interfaces for industrial use (Robustel). It also supports Bluetooth 5.

This is an industrial LTE router equipped with Bluetooth 5 (Robustel). It is I/O rich and can be used for various applications.

Company：PALTEK 本社
Price：10,000 yen-100,000 yen

Routers, Switches, and Hubs
Other network tools
Work Robot

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial LTE Router "R1510-4L Kit"

An industrial LTE router that combines low cost and a variety of interfaces.

This is an industrial LTE router provided by Robustel, featuring low cost and a variety of interfaces. The casing material is plastic, but it is an industrial product that can be used in harsh environments with an operating temperature range of -20 to 70°C. In addition to Ethernet (2 ports), it also supports general-purpose input and output. There is also an option for a product with WiFi.

Company：PALTEK 本社
Price：10,000 yen-100,000 yen

Routers, Switches, and Hubs
Other network tools
Work Robot

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial LTE Router "R1520-4L Kit"

An industrial LTE router that combines low cost and diverse interfaces.

This is an industrial LTE router provided by Robustel, featuring low cost and a variety of interfaces. The casing material is plastic, but it is an industrial product that can be used in harsh environments with an operating temperature range of -20 to 70°C.

Company：PALTEK 本社
Price：10,000 yen-100,000 yen

Routers, Switches, and Hubs
Other network tools
Work Robot

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnet Gripper for Industrial Robots

High-speed operation of robots is possible! A magnetic gripper equipped with powerful holding force and safety.

The "Magnet Gripper for Industrial Robots" is adopted by leading automobile manufacturers and integrators worldwide for applications in the white body of automobile manufacturing and hoist transportation. By using compressed air to switch the magnetic force on and off, it significantly reduces air consumption compared to vacuum grippers. Due to its high magnetic flux density, it exhibits strong holding power even on air gaps and rounded surfaces such as rust and painted areas. 【Features】 ■ Enables high-speed operation of robots with powerful gripping ■ Minimizes robot paths ■ Lightweight and compact, allowing for reduced weight and increased efficiency of EOAT ■ Capable of gripping from one side only, making fixture design easier compared to mechanical grippers ■ The use of permanent magnets eliminates the risk of workpiece drop even when the power supply is cut off *For more details, please refer to the PDF document or feel free to contact us.

Company：愛知産業
Price：Other

Transport and handling robots
Other conveying machines
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Industrial LTE Router 'HWL-3511-DS'

Sierra Wireless module used! Compact industrial LTE router supporting dual SIM/multi-carrier.

The "HWL-3511-DS" is a dual SIM-compatible industrial LTE router that uses non-China manufactured modules. It features an automatic recovery function in the event of line or system abnormalities, allowing for stable operation even without human intervention. It can be utilized for building remote communication environments from remote offices or homes, as well as for various data collection and monitoring camera footage, enabling remote data transmission. 【Features】 - Lightweight and compact design, with a wide operating temperature range of -30 to +60°C - Compatible with SIM cards from NTT DOCOMO, AU, and Softbank - Uses Sierra Wireless modules, non-China manufactured - Supports a wide range of router protocols (NAT/DHCP/VLAN/routing/VPN, etc.) *For more details, please refer to the PDF document or feel free to contact us.

Company：ハイテクインター
Price：Other

Routers, Switches, and Hubs
Other network tools
Work Robot

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case studies of embedded robot implementation using AI - AGV, appearance inspection, FA

AGV/AMR Unmanned Transport Vehicles, Appearance Inspection, Factory Automation | A comprehensive introduction to non-contact AI kiosk terminals and AR case studies.

■ AGV/AMR Unmanned Transport Vehicle (ARK-1220F/ARK-1551) - PC-based solutions provide cost-effective and high-performance computing. - Fanless, low power, and compact design. - Abundant I/O options including cameras, sensors, motion control, and wireless modules (WiFi / LTE / 5G). - Equipped with management software "DeviceOn" for real-time remote device management. ■ Appearance Inspection Equipment (ARK-3531/ARK-3532C) - Achieves real-time, reliable image processing and analysis with Intel Desktop CPU. - Supports high-speed cameras with GigE / USB 3.0 connections. - Supports Intel SW RAID 0/1/5/10 for big data storage. - Integration with software "iEdge" for predictive maintenance of equipment. ■ AI Factory Automation (ARK-3532B/ARK-3532D) The AIMB-228 is an industrial Mini-ITX motherboard that enhances customer satisfaction by being embedded in a graphic try-on PCle expandable multi-display.

Company：アドバンテック
Price：Other

Embedded Board Computers
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Security Remote Access Industrial Router Secomea

A solution that enables secure remote access to devices via the internet.

Secomea's "Remote Access Solution" allows for remote control from a distance simply by installing and configuring Secomea's hardware/software on the equipment side, such as PLCs, HMIs, and IP cameras. This leads to reduced travel costs and minimized downtime. ▶ Secomea offers high-security products compliant with European standards: - NIS2 compliant - IEC62443-4-1 certification obtained - CVE numbering authority number obtained - Designed to meet the requirements of both OT and IT It is also optimal as a means to protect information from the increasing trend of cyberattacks in recent years. ▶ The annual maintenance cost starts at a low amount, significantly reducing the initial cost burden compared to dedicated line contracts. ▶ Additionally, centralized log management is possible, which helps in understanding production status and predictive maintenance. 【Features】 ■ Remote control of equipment is possible with a communication environment and a PC ■ Already widely adopted overseas, especially in Europe ■ Secure communication through strong encryption ■ Starter kits are also available

Company：因幡電機産業産機カンパニー
Price：10,000 yen-100,000 yen

Remote Control
Routers, Switches, and Hubs
Other security
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

All-in-one Smart 3D Sensor "Gocator"

■High precision and ultra-fast 3D measurement ■Built-in controller ■Easy operation with mouse control

★November 2024: A red laser model has been added to the high-end model with a wide field of view!!★ ■High precision and ultra-fast 3D measurement X resolution from 6μm, Z repeatability from 0.2μm, maximum scan rate of 10kHz ■Built-in controller All functions necessary for inline inspection are integrated into the main unit. ■Easy operation with mouse control 3D shape acquisition, positioning, measurement and judgment with tools, and communication of results to external systems can all be easily performed with mouse operations. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Company：因幡電機産業産機カンパニー
Price：Other

Other machine tools
3D measuring device
Other inspection equipment and devices
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Collaborative Robot Suction Gripper 'VGP20'

OnRobot's highly versatile suction gripper (compatible with UR+)

A compact suction gripper that can handle multiple workpieces with just one unit. ◇Features - Capable of handling heavy workpieces ⇒ With a maximum load of 20kg, it can accommodate both light and heavy workpieces with just one unit. - Built-in vacuum pump eliminates the need for a compressor ⇒ There is no need to run air piping, which does not hinder the robot's movement and makes teaching easier. - Multi-grip function ⇒ It has four channels for the vacuum pump inside the main body, allowing for individual control. This enables the simultaneous gripping of four workpieces. ◆Others - Dust and water resistance: IP54 - Weight of the main unit: 2.55kg ★ Compatible with many collaborative robots, including Universal Robots.

Company：因幡電機産業産機カンパニー
Price：Other

Other industrial robots
Articulated Robot
Transport and handling robots
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SCHMALZ Magnetic Gripper 'SGM'

A hand for collaborative robots that can grip rod-shaped workpieces such as pipes, using permanent magnets.

【Features】 ■Anti-slip The anti-slip feature on the gripping surface suppresses lateral slipping of the workpiece and improves transport stability. ■Lightweight Weighing only 450g, it allows for optimal utilization of the robot's payload capacity. ■Compact yet powerful holding force Despite its small size of 84mm in height and 75mm in diameter, it achieves a maximum holding force of 100N. ■Safe during power outages It continues to hold even during power outages, preventing the workpiece from falling. ≪Complete set options≫ Options include a solenoid valve, air hose, and cable guide, allowing you to start work immediately without hesitation in selecting additional equipment.

Company：因幡電機産業産機カンパニー
Price：Other

Other assembly machines
Other industrial robots
Transport and handling robots
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Solution Book" featuring a variety of collaborative robots, AGVs, and more.

For those considering automation. Many products that help reduce labor and improve quality on-site. We also introduce case studies.

Our company handles a variety of products from diverse manufacturers, including collaborative robots from Universal Robots (UR), AGVs, and peripheral devices. Currently, we are offering a booklet that introduces our products, case studies, and the services we provide. It contains useful information for both those who are introducing robots for the first time and those who have already implemented them. 【Services (Excerpt)】 We have established a Robot Center in two locations, Osaka and Tokyo, where we showcase collaborative robots and AGVs. You can experience the benefits of implementation through actual machine demonstrations. 【Case Studies (Excerpt)】 ■ Screw tightening in intermediate processes ■ Bagging process for finished products ■ Transporting workpieces and parts boxes to the device ■ Workpiece loading and unloading processes ■ Alignment and arrangement tasks in confined spaces *For more details on the case studies, please refer to the materials available for download.

Company：因幡電機産業産機カンパニー
Price：Other

Other industrial robots
Other conveying machines
Vacuum Equipment
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【MENOU】AI Verification Imaging Kit Camera and Lighting Mounting Fixture

The "Ashura" imaging system allows you to easily set up a shooting environment, providing everything you need in one unit that can be used on a tabletop.

Solve these concerns all at once! □ I want to easily set up cameras and lighting anytime, anywhere. □ It would be great if I could easily install it on the production line. □ AI requires image capture, but I need an easy way to set up cameras and lighting. □ I want to capture images in various locations within the factory. Please make use of the portable imaging kit "MENOU Photo Room Ashura" that allows for easy setup of imaging environments for AI inspection!

Company：因幡電機産業産機カンパニー
Price：Other

Visual Inspection Equipment
Other FA equipment
Other image-related equipment
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Affordable and quick start for IoT in existing facilities! This is the first step towards a smart factory♪

What should I start with for IoT? Is it cost-effective? The answers are here...! Inaba Electric supports you from a small start to full-scale operation!

IoT implementation, digital transformation, and smart factory development are all challenges that need to be addressed, but the actual situation on the ground is... - Diverse manufacturers of equipment - Outdated devices from the Showa era - Use of products from defunct manufacturers - Products from various years - A mix of general-purpose and specialized machines These issues make it difficult to collect data. Even if you think about gathering data from the main controller... - Does the upper system support communication with that controller? - Is there a communication unit available for cases where it cannot connect? - The risk of modifying the program of equipment that is functioning properly - Uncertainty about the location of necessary data within the controller There are numerous problems to tackle! Given this background, Inaba Electric Industry recommends starting with a system that can collect data without making electrical or software modifications to the equipment. This is "Retrofit IoT." Implementing IoT can be challenging due to the difficulty in calculating cost-effectiveness. Therefore, we propose a way to take the first step towards IoT implementation with products that are: - Low-cost - Installable as DIY - Expandable as needed

Company：因幡電機産業産機カンパニー
Price：10,000 yen-100,000 yen

Sensors
Surveillance Cameras
Other FA equipment
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Understand the IoT products introduced for different purposes! "Learn IoT from the Basics"

What is IoT? Where do you start? The answers are here! You can understand the current level of smart factory implementation and the challenges you should tackle next.♪

We are currently offering materials that allow you to learn the basics of IoT, as well as the appropriate product and implementation policy considerations. 【Contents】 - What is IoT? - What is IoT in the FA industry? - Benefits of implementation - Your IoT implementation level diagnosis - The necessity of understanding the current situation - The concept of diagnosis - Examples of implementation - Recommended IoT products by purpose This material is useful for a wide range of people, from those who are specifically considering the introduction of IoT products to those who have just started gathering information or are curious about what IoT products are available. When we talk about IoT, the purposes such as traceability, energy saving, and equipment maintenance are diverse. Management needs to clarify investment judgment criteria, while the field needs to establish engagement standards. By utilizing the indicators listed in the catalog, you can accurately assess the "target level" and the current "action level," allowing for improvements to the next STEP. As a result, it will enable planned investment decisions between management and equipment personnel. Please make use of this to understand the current situation and the next steps!

Company：因幡電機産業産機カンパニー
Price：Other

Data Logger
Sensors
others
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Achieve robot selection that suits your company! Explanation material "Automation You Can Learn from the Basics"

Why is our company's automation not progressing? INABA will assist you in selecting the appropriate robots and equipment. 【*Free basic knowledge that you can't ask about now!】

INABA is engaged in the industrial equipment business, selling control devices, robots, IoT devices, and original products, as well as proposing automation solutions for production lines that combine these elements. We are pleased to offer a free explanatory document that teaches how to select robots and equipment suitable for automation purposes and what items should be considered. [Contents (excerpt)] ◆ What is automation? ◆ What automation means in the FA industry ◆ Benefits of implementation ◆ Means of automation This is a useful resource for engineers considering factory optimization and labor reduction, whether they are specifically looking into automation or are curious about the available means of automation. *Please click the download form to obtain the explanatory document "Learning Automation from the Basics." For details on specifications or any concerns, feel free to consult us through the inquiry form.

Company：因幡電機産業産機カンパニー
Price：Other

Assembly robot
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epson "Automation of Difficult Tasks"

Achieving automation of difficult tasks through high motion accuracy technology, image processing, and force control.

High Precision: By combining Epson's unique "Gyroplast Technology" with robot control, we achieve high-speed and high-precision servo control. Precision: By integrating force sensors with robots, we enable the automation of difficult and precise tasks that previously relied on human labor. Options: With a wide range of options such as image processing systems and parts feeders, we provide a one-stop solution for the equipment necessary for automation.

Company：因幡電機産業産機カンパニー
Price：Other

others
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FAMS "Collaborative Robot Palletizing Package"

Collaborative robot palletizing package, operable without a fence, space-saving installation.

Space-saving: Installation area: 3,100×1,100mm (representative dimensions including 2 pallets), achieving automation of palletizing. Easy operation: No need for complex program creation for packaging; all operations can be performed via a touch panel.

Company：因幡電機産業産機カンパニー
Price：Other

others
Work Robot

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release from heavy labor through assistive devices

With the aid of assistive devices, we achieve support for heavy labor tasks, labor safety, prevention of labor-related accidents, and improvement of the workplace environment.

Simple: A simple assist mechanism controlled by air pressure, eliminating the need for complex settings. Easy to set up due to ground installation. Custom: Customizable payload, axis configuration, and chuck mechanism according to the work and application.

Company：因幡電機産業産機カンパニー
Price：Other

others
Work Robot

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Daihen "Collaborative Robot for Welding"

One-stop proposal for high-quality welding automation, easily teachable through the use of collaborative robots.

High Quality: Equipped with a new control technology focused on improving the trajectory accuracy of linear and arc interpolation unique to Daihen, achieving high-quality welding and allowing for various welding methods to be selected. Easy: Designed for collaborative robots, it allows for intuitive operation, enabling programming without specialized knowledge. Capture images of the welding work, select the welding range/conditions, and create programs. Options: A wide range of options is available to accommodate various work environments and support small-batch production of diverse products.

Company：因幡電機産業産機カンパニー
Price：Other

others
Work Robot

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LINX "All-in-One 3D Sensor"

All-in-one smart 3D sensor capable of various measurements such as steps, dimensions, volume, and surface.

Wide range of applications: With a rich lineup, it accommodates a wide range of applications from micron-level high-precision measurements to over 2 meters in wide range.

Company：因幡電機産業産機カンパニー
Price：Other

others
Work Robot

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Work Robot Product List and Ranking from 169 Manufacturers, Suppliers and Companies | IPROS GMS

Work Robot Manufacturer, Suppliers and Company Rankings

Work Robot Product ranking