Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 58 items
It is possible to connect RS232C devices to the FOMA network using the protocol converter function.
The FOMA ubiquitous module has been replaced with the AME3240DO module, allowing RS-232C devices to be connected to the FOMA network using the protocol converter function.
When defects or abnormalities are detected in the inspection process, an email notification is sent to the person in charge of the previous process. Even when the inspection process manager leaves their post, notifications can be sent to relevant parties in real-time.
【System Overview】 The CONPROSYS M2M Gateway series monitors the PLCs in the inspection process. When an anomaly occurs, CONPROSYS determines it and sends an email notification to the responsible personnel for each process. This allows for the situation to be checked via email even when the administrator is away from their post. Additionally, by including information such as anomaly codes, preparations can be made smoothly in advance. 【Recommended Products】 ● M2M Gateway Series Supports multi-vendor compatibility, enabling IoT integration for PLCs and CNCs. Allows data collection from multiple PLCs with a single device. ● HMI/SCADA Software CONPROSYS HMI System Facilitates data collection and control through various IoT gateway devices. Easily builds and operates monitoring and management systems for various applications.
Collect various data such as sludge concentration, chemical quantity, pressure, and flow rate using an IoT gateway, and perform operational monitoring by integrating it into a cloud service.
【System Overview】 This is a system for monitoring the operation of water treatment equipment. By sending various data from the water treatment equipment to a cloud server, it becomes possible to understand the timing for maintenance. It collects various data such as sludge concentration, chemical dosage, pressure, and flow rate from the PLC controlling the water treatment machinery and sends it to the cloud server. Information from machines scattered across the country can be centrally managed, allowing for an understanding of the equipment's condition and wear without having to visit the site. This information can be utilized for determining maintenance timing and optimizing operational plans. This system can be built without programming using "CONPROSYS" and "Cloud Data Service." 【Recommended Products】 ● M2M Gateway Series Supports multi-vendor compatibility to IoT-enable PLCs and CNCs. Data collection from multiple PLCs is possible with a single device. ● HMI/SCADA Software CONPROSYS HMI System Data collection and control through various IoT gateway devices from different manufacturers. Easily build and operate monitoring and management systems for various applications.
This is a system for remote toilet monitoring and maintenance management (determining cleaning schedules) using an IoT gateway.
This is a system for remote toilet monitoring and maintenance (determining cleaning schedules) aimed at water conservation and environmental protection in public restrooms. It helps provide a safe and secure environment by detecting long-term users. The system measures and monitors signals from various sensors, visualizing the presence of equipment troubles and usage conditions. By understanding usage patterns, it establishes a mechanism for determining cleaning schedules and monitoring long-term users, including email notifications. Additionally, it can also support the visualization of usage conditions. **Recommended Products** ● M2M Controller Series Easily build an IoT environment. Flexible configurations are possible depending on the installation location, wiring methods, and the number of I/O points.
A general-purpose IoT gateway and remote access router that enables IoT tools from PLCs and HMIs to terminal devices such as thermometers and sensors.
The Flexy201 is equipped with IoT promotion features that, in addition to remote access capabilities, enable data collection and alarm notification functions for various devices (PLC, HMI, temperature and humidity sensors, etc.). ■ Secure VPN Remote Access With remote operation and monitoring capabilities for distant equipment, it allows for operation and monitoring without being on-site, thereby reducing travel costs, waiting time, and downtime. ■ WEB Server HMI Function The Flexy201 itself has HMI functionality and can create web graphics, allowing monitoring and operation of the web interface from anywhere using a smartphone or tablet. It has built-in BASIC and JAVA programming, enabling the design of tasks ranging from simple to sophisticated automation tasks. ■ Support Function for Field Devices Communication and I/O for PLCs, HMIs, thermometers, and sensors can be managed through a web server for data collection and alarm notification. ■ Unique Features of Flexy201 By inserting one communication expansion card and two I/O expansion cards, it can control various devices equipped with I/O. It can promote IoT across various industries, including agriculture and public facilities.
IoT gateway compatible with LTE communication and capable of freely expanding functions.
The Armadillo-IoT Gateway G3 is a high-performance IoT gateway that is also ideal for edge computing. It comes standard with an LTE communication module and also includes a WLAN + BT combo module. You can choose the communication method with the cloud according to the installation environment. By utilizing the Armadillo BTO service during mass production, you can equip only the necessary modules and functions, keeping costs down for product commercialization. ▼ Equipped with NXP's i.MX 7Dual It adopts the "i.MX 7Dual" SoC (NXP Semiconductors) with a dual-core Arm Cortex-A7 (996MHz). ▼ Easy interface expansion with dedicated add-on modules It supports "add-on modules" that can be connected to the mainboard via a BtoB connector. By selecting from various add-on modules available as options and installing them in the dedicated slot, you can add various interfaces such as serial (RS232C/422/485) and low-power wireless communication.
Power-saving IoT gateway equipped with LTE-M and supporting cloud communication with low power consumption.
The Armadillo-IoT Gateway A6E is an IoT gateway that operates with lower power consumption than conventional models. It is equipped with a cellular LPWA (LTE-M) module that enables communication with the cloud at ultra-low power consumption. When building a standalone system, smaller capacity solar panels and batteries can be selected, significantly reducing the overall cost of the system. ▼ Equipped with NXP's i.MX 6ULL It adopts the Arm Cortex-A7 (528MHz) SoC "i.MX 6ULL" (manufactured by NXP Semiconductors). ▼ Equipped with RS485 and contact I/O In addition to standard interfaces such as USB and LAN, it includes RS485, contact input (DI), and contact output (DO), allowing for immediate connection to sensors and devices. Various solutions can be realized without the need for hardware expansion development.
Equipped with an LTE ubiquitous module! We quickly deliver the status of equipment and devices in remote locations.
The "DMA-ESL" is an IoT gateway capable of simultaneous operation with RS-232C and Ethernet input/output. In "Internet Mail Mode," by inputting data from RS-232C or Ethernet, it can automatically send the data as the body or as an attachment to registered email addresses (up to 10). In "Access Premium LTE Mode," by inputting data from RS-232C or Ethernet, it can communicate with a central server via TCP/IP or UDP/IP. 【Features】 ■ Equipped with an LTE ubiquitous module ■ Two interface functions ■ Easy and cost-effective serial data communication ■ Capable of receiving area mail and SMS ■ Directly operate the module with AT commands (PPP communication) *For more details, please refer to the PDF document or feel free to contact us.
Connect with major cloud services and no-code! Hardware with high reliability and flexible scalability.
The "OpenBlocks IoT FX1" is an IoT gateway that achieves faster speeds and lower power consumption. It evolves in various aspects while maintaining its rich features, such as the IoT gateway software FW5, which allows no-code connections to major IoT devices and the cloud. Additionally, its compact design, which is palm-sized, makes it easy to place even when adding to existing networks. 【Features】 ■ Adopts i.MX 8M Plus for over twice the speed and low power consumption ■ Robust and compact chassis design with a high MTBF value ■ Diverse interfaces and expansion options ■ Convenient PoE support for environments with wiring constraints ■ Comes with maintenance services to support long-term operation (available for purchase for one year, with the option to continue for a fee) *For more details, please refer to the PDF materials or feel free to contact us.
![IoT Gateway "SmartFitPRO" [No Coding Required]](https://image.mono.ipros.com/public/product/image/702/2000804772/IPROS06917533267422803656.png?w=280&h=280)
No coding required with the dedicated setup tool! Easily install on equipment for a smart IoT transformation!
We would like to introduce the 'SmartFitPRO Basic/Standard' that we handle. It can be directly mounted and is compatible with DIN rails. Additionally, it requires no coding thanks to a dedicated configuration tool. It smartly fits various new and existing equipment, regardless of the scene. 【Features】 ■ The standard module achieves data sampling and cloud transmission with just parameter settings. ■ Construction of a remote monitoring system for sensors. ■ Remote control of relay outputs. ■ Easy connection of sensors. ■ Semi-custom software is also supported. *For more details, please refer to the PDF document or feel free to contact us.
IoT Gateway "KES IoT Logic" Solution Azure Stream Analytics On Edge
The IoT gateway series "KES IoT Logic" can build the solution "Azure Stream Analytics On Edge" in collaboration with Microsoft Azure. By building "Azure Stream Analytics On Edge," it is possible to deploy (download and execute) programs created in the cloud to the IoT gateway. Primarily, it enables real-time processing on-site and the preprocessing of collected data for transmission to the cloud. At an advanced level, it is also possible to deploy the entire machine learning engine to the IoT gateway.
【Ver.2】IoT gateway specialized for connection with PLCs - Quick to deploy entry model - Monitors operational status embedded in industrial equipment.
The entry model of the "KES IoT Logic Series," an IoT gateway specialized for connection with PLCs, supports communication protocols from major industrial equipment manufacturers. It is ideal for monitoring the operational status of devices embedded in industrial equipment. It is compatible not only with Microsoft Azure and AWS but also with general cloud services.
![[Case Study] Adoption of Remote Monitoring Autonomous Driving Demonstration Experiment](https://image.mono.ipros.com/public/product/image/9b9/2000793269/IPROS13489911362296230892.png?w=280&h=280)
"KES IoT Logic" has been adopted for a remote monitoring type autonomous driving demonstration experiment utilizing video transmission in the autonomous driving demonstration project in Kakegawa City, Shizuoka Prefecture.
The recent autonomous driving demonstration required "video streaming functionality" and "real-time device control." Based on our IoT gateway "KES IoT Logic," we have customized and added these features to achieve autonomous driving. ■ Video Streaming Functionality The "1. Uploading data for face recognition/person flow analysis" feature has been enhanced with the addition of video streaming functionality through customization. This allows for real-time uploading of footage captured by AI cameras to the cloud in a streaming format. ■ Real-time Device Control The "2. Remote control of LED lights at bus stops" feature has been enhanced with real-time device control functionality. This synchronizes the control of LED lights that notify about the approaching bus at the bus stop. In the "3. Uploading heat stroke index data" feature, we have implemented customizations for the specific protocol of the WBGT sensor. Our company offers tailor-made customizations to meet our customers' needs. Our experienced engineers are here to support you, so we would appreciate it if you could consult with us first.
![[Information] What is a secure IoT gateway architecture?](https://image.mono.ipros.com/public/product/image/ca9/2000606651/IPROS88839068206574227635.png?w=280&h=280)
We will introduce the architecture of IoT gateways and an architecture with enhanced security.
With the advent of Industry 4.0 and industrial IoT, there is a growing interest in connecting plant control systems to the cloud. One method for linking devices to the cloud is to collect data using OPC UA and send it to the cloud via an MQTT gateway. While this combination is desirable from a security standpoint, it does not necessarily meet the needs of all users. This document explains the structure of a typical industrial IoT gateway and introduces methods to enhance security. [Contents] ■ Typical IoT Gateway ■ DMZ and Daisy Chain Connection ■ IoT Gateway with Enhanced Security via DHTP ■ Introduction to IoT Solutions *For more details, please refer to the PDF document or feel free to contact us.
Despite its small size, it is equipped with a rich variety of I/O ports! - Supports a wide temperature range of -5℃ to 55℃.
The "NISE 52" is a multi-function IoT gateway that can handle complex devices requiring separate control and gateways all in one unit. In addition to the wide range input of 9-30V DC, which is the first for the "NISE 50 series," it also features remote switch terminals that were previously only available in higher-end models, allowing for power ON/OFF from a distance. With three LAN ports, it functions as a network device, and with three HDMI ports, it serves as a player for digital signage and more. It also includes eight USB ports and four COM ports, making it a versatile fanless computer that can be used across a wide range of applications. 【Features】 - Equipped with a Quad Core Intel Celeron J3455 CPU - Achieves sufficient CPU power with low power consumption - Includes remote switch terminals - Allows for power ON/OFF from a distance - Usable across a wide range of applications, including control devices *For more details, please refer to the PDF document or feel free to contact us.
