サンワ・エンタープライズ Product Lineup

This is a hose band made of plastic for soft tubes. The design, which tightens the tube's outer circumference evenly, ensures a snug fit between the fitting and the tube without gaps. Additionally, the innovative appearance, which reduces the cross-sectional area of the engagement part by approximately 40% compared to conventional products, allows for simplification and space-saving around the fittings. It is ideal for securing flexible tubes and fittings made of soft PVC, silicone, and various types of rubber. Features: ● Made entirely of flexible and strong nylon ● Uniformly tightens the fitting and tube ● Reduces installation space by approximately 40% (compared to conventional products) <About the Showroom> With the concept of "See," "Touch," "Compare," and "Confirm," we display around 3,000 items of plastic piping components. The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For venue access, please refer to the "Basic Information" section on the page.

• hose

Eclipse is an electromagnetic proportional control valve that enables high-precision and fine fluid control. By integrating high-performance micro-stepping motor drive with a unique slide-plate valve mechanism developed through exceptional processing technology, it has successfully achieved a durable structure and high-precision continuous fluid control technology. The valve (liquid contact part) employs ceramic plates that offer high durability and corrosion resistance, making it adaptable to a wide range of fluids from gases such as air and gas to various liquids. It also enables "zero dead volume," which is an important factor when handling high-purity fluids, providing users with more comfortable and reliable results. ● Fine resolution (flow rate: 0.2 ml/min *, position: 1.5 μm/step) * at 207Kpa, fluid: water ● Excellent responsiveness (< 2 ms) and follow-up capability (error > 4%), as well as reproducibility (< 0.5%) ● The valve unit, which is in contact with the fluid, is made of ceramic, providing high durability and corrosion resistance ● Zero dead volume specification ● Adaptable to a wide range of fluids including air, gas, and liquids <Showroom> You can see a demonstration of Eclipse at the TFT Building, just a 3-minute walk from Tokyo Big Sight.

• Flow Control

Eclipse is an electromagnetic proportional control valve that enables high-precision and fine fluid control. By integrating high-performance micro-stepping motor drive with a unique slide-plate valve mechanism developed through exceptional processing technology, it has successfully achieved both a durable structure and high-precision stepless fluid control technology. The valve (liquid contact part) uses ceramic plates that possess high durability and corrosion resistance, making it adaptable to a wide range of fluids from gases such as air and gas to various liquids. It also enables "zero dead volume," which is an important factor when handling high-purity fluids, providing users with more comfortable and reliable results. ● Fine resolution (flow rate: 0.2 ml/min *, position: 1.5 μm/step) * at 207Kpa, fluid: water ● Excellent responsiveness (< 2 ms) and follow-up capability (error > 4%), as well as reproducibility (< 0.5%) ● The valve unit, which is the liquid contact part, is made of ceramic with high durability and corrosion resistance ● Zero dead volume specification ● Adaptable to a wide range of fluids including air, gas, and liquids <Showroom> You can see a demonstration of Eclipse at the TFT building, just a 3-minute walk from Tokyo Big Sight.

• Flow Control

Eclipse is an electromagnetic proportional control valve that enables high-precision and fine fluid control. By integrating high-performance micro-stepping motor drive with a unique slide-plate valve mechanism developed through exceptional processing technology, it has successfully achieved a durable structure and high-precision continuous fluid control technology. The valve (liquid contact part) employs a ceramic plate that combines high durability and corrosion resistance, making it adaptable to a wide range of fluids from gases such as air and gas to various liquids. It also enables "zero dead volume," which is an important factor when handling high-purity fluids, providing users with more comfortable and reliable results. ● Fine resolution (flow rate: 0.2 ml/min*, position: 1.5 μm/step) *at 207Kpa, fluid: water ● Excellent response (< 2 ms) and follow-up (error > 4%), as well as reproducibility (< 0.5%) ● The valve unit, which is the liquid contact part, is made of ceramic with high durability and corrosion resistance ● Zero dead volume specification ● Adaptable to a wide range of fluids including air, gas, and liquids <Showroom> You can see a demo of Eclipse at the TFT Building, just a 3-minute walk from Tokyo Big Sight.

• Flow Control

Eclipse is an electromagnetic proportional control valve that enables high-precision and fine fluid control. By integrating high-performance micro-stepping motor drive with a unique slide-plate valve mechanism developed through exceptional processing technology, it has successfully achieved a structure with excellent durability and high-precision stepless fluid control technology. The valve (liquid contact part) employs ceramic plates that possess high durability and corrosion resistance, making it adaptable to a wide range of fluids from gases such as air and gas to various liquids. It also enables "zero dead volume," which is an important factor when handling high-purity fluids, providing users with more comfortable and reliable results. ● Fine resolution (flow rate: 0.2 ml/min *, position: 1.5 μm/step) * at 207Kpa, fluid: water ● Excellent responsiveness (< 2 ms) and follow-up capability (error > 4%), as well as reproducibility (< 0.5%) ● The valve unit, which is the liquid contact part, is made of ceramic with high durability and corrosion resistance ● Zero dead volume specification ● Adaptable to a wide range of fluids including air, gas, and liquids <Showroom> You can see a demonstration of Eclipse at the TFT Building, a 3-minute walk from Tokyo Big Sight.

• Flow Control

Antlock is a piping fitting designed to achieve a balance of heat resistance, strength, chemical resistance, and cost-effectiveness, based on the super engineering plastic "PEEK." This Antlock utilizes the heat and chemical resistance characteristics of PEEK resin while incorporating carbon to further enhance strength. It adopts a simple and proven ferrule-less structure for connecting with tubes, ensuring reliable and speedy work. It is suitable for applications that traditionally used metal fittings such as stainless steel, providing weight reduction and rust prevention, as well as cost reduction in areas that previously used fluoropolymer fittings. 【First 1000 sets - Free sample distribution ongoing】 If you are interested, please contact us as soon as possible using the form below. (Distribution will end once the quantity is reached.) <About the showroom> With the concept of "see," "touch," "compare," and "verify," we display approximately 3,000 items of plastic piping components. The location is within the TFT building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For access to the venue, please refer to the "Basic Information" section on the page.

• Pipe Fittings

Antlock is a piping fitting designed to achieve a balance between heat resistance, strength, chemical resistance, and cost-effectiveness, made from the super engineering plastic "PEEK." This Antlock utilizes the heat and chemical resistance characteristics of PEEK resin while incorporating carbon to further enhance strength. It adopts a simple and proven ferrule-less structure for connecting to tubes, ensuring reliable and speedy work. It is suitable for applications that traditionally used metal fittings such as stainless steel, providing weight reduction and rust prevention, as well as cost reduction in areas that used fluoropolymer fittings. 【Free sample distribution for the first 1000 sets】 If you are interested, please contact us promptly using the form below. (Distribution will end once the quantity is reached.) <About the showroom> With the concept of "see," "touch," "compare," and "verify," we display approximately 3000 items of plastic piping components. The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For access to the venue, please refer to the "Basic Information" section on the page.

• Pipe Fittings

Antlock is a piping fitting designed to achieve a balance between heat resistance, strength, chemical resistance, and cost-effectiveness, based on the super engineering plastic "PEEK." This Antlock utilizes the heat and chemical resistance characteristics of PEEK resin while incorporating carbon to further enhance strength. It adopts a simple and proven ferrule-less structure for connecting to tubes, enabling reliable and speedy work. It is suitable for applications that previously used metal fittings such as stainless steel for weight reduction and rust prevention, as well as for cost reduction in fields that used fluoropolymer fittings. 【First 1000 sets, free sample distribution ongoing】 If you are interested, please inquire as soon as possible using the form below. (Distribution will end once the quantity is reached.) <About the showroom> With the concept of "see," "touch," "compare," and "verify," we display approximately 3,000 items of plastic piping components. The location is within the TFT building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For access to the venue, please refer to the "Basic Information" section on the page.

• Pipe Fittings

Antlock is a piping fitting designed to achieve a balance of heat resistance, strength, chemical resistance, and cost-effectiveness, made from the super engineering plastic "PEEK." This Antlock utilizes the heat and chemical resistance characteristics of PEEK resin while incorporating carbon to further enhance strength. It adopts a simple and proven ferrule-less structure for connecting to tubes, enabling reliable and speedy work. It is ideal for applications that previously used metal fittings such as stainless steel, offering weight reduction and rust prevention, as well as cost reduction in fields that used fluoropolymer fittings. 【Free sample distribution for the first 1000 sets】 If you are interested, please contact us promptly using the form below. (Distribution will end once the quantity is reached.) <About the showroom> With the concept of "see," "touch," "compare," and "verify," we display approximately 3,000 items of plastic piping components. The location is within the TFT building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For venue access, please refer to the "Basic Information" section on the page.

• Pipe Fittings

Antlock is a piping fitting designed to achieve a balance between heat resistance, strength, chemical resistance, and cost-effectiveness, based on the super engineering plastic "PEEK." This Antlock utilizes the heat and chemical resistance characteristics of PEEK resin while incorporating carbon to further enhance strength. It adopts a simple and proven ferrule-less structure for connecting to tubes, ensuring reliable and speedy work. It is suitable for applications that previously used metal fittings such as stainless steel, providing weight reduction and rust prevention, as well as cost reduction in fields that used fluoropolymer fittings. 【Free sample distribution for the first 1000 sets】 If you are interested, please contact us as soon as possible using the form below. (Distribution will end once the quantity is reached.) <About the showroom> With the concept of "see," "touch," "compare," and "verify," we display approximately 3,000 items of plastic piping components. The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For access to the venue, please refer to the "Basic Information" section on the page.

• Pipe Fittings

Just connect the compressed air! This is an experimental video of "Sanwa Pneumatic Equipment," which has been chosen for nearly 40 years in manufacturing sites. We have compiled videos utilizing the power of blowing in a YouTube playlist. The Ariake Satellite Showroom is based on the concept of "see," "touch," "compare," and "verify," showcasing about 3,000 items of plastic piping parts and pneumatic equipment that can be used just by connecting compressed air. The location is the TFT Building, close to Tokyo Big Sight. It’s convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 3-6-11 Ariake, Koto-ku, Tokyo, TFT Building, East Wing, 8F

• Pneumatic Equipment

Sanwa Pneumatic Equipment is collaborating with FISA, known for its ionizers, to develop new products. We thought that by combining the "Line Blow," which generates a layered air blow, with FISA's ultra-thin bar-type static elimination system, it could provide a new solution for manufacturing sites. -------------------------------- The Ariake Satellite Showroom features around 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto Ward, Ariake 3-6-11, TFT Building, East Wing, 8th Floor

• Ionizers and static eliminators

Just connect compressed air! This is an experimental video of "Sanwa Pneumatic Equipment," which has been chosen for nearly 40 years in manufacturing sites. We have compiled videos utilizing the power of suction (vacuum) in a YouTube playlist. https://www.youtube.com/playlist?list=PLJfdHY6UGJsDZL7sNElexO-Qg0gVpFqzE ーーーーーーーーーー The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays about 3,000 items, including plastic piping parts and pneumatic equipment that can be used just by connecting compressed air. It is located in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Powder Conveyor Device

The conveyor vacuum is a device that enables air transport through a powerful vacuum pressure generated by compressed air as the power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transport and exhaust of gas and mist. It is made of stainless steel, which is highly durable. ---------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting to compressed air. It is located in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 3-6-11 Ariake, Koto-ku, Tokyo, TFT Building, East Wing, 8th Floor

• Powder Conveyor Device

The conveyor back is a device that enables air transport through the powerful vacuum pressure generated by compressed air as its power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transfer and exhaust of gas and mist. It is made of aluminum, which is economically advantageous. -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is located in the TFT building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 3-6-11 Ariake, Koto-ku, Tokyo, TFT Building, East Wing, 8th Floor

• Powder Conveyor Device

The features of Sanwa's pneumatic equipment "Air Transport" series are the simultaneous generation of powerful "vacuum (suction)" and "blow (blowing away)." By incorporating surrounding air along with compressed air, it creates an amplified flow that demonstrates strong transport capabilities. It can be utilized not only for transporting powders, granules, and metal pieces but also for dust suction and exhaust. The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Powder Conveyor Device

The hall nozzle is a blow nozzle that can be used simply by connecting it to a compressed air passage. It is a model focused on propulsion power, equivalent to direct blowing with pipes of 2 to 4 mm in diameter. It is recommended for cases where pinpoint power is needed, such as the removal of cutting powder clogged in holes. ーーーーーーーーーー The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting to compressed air. The location is the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-chome 6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The jet nozzle is a blow nozzle that can be used simply by connecting it to a compressed air line. It is a model that emphasizes airflow, equivalent to direct blowing with pipes of 2 to 4 mm in diameter. By drawing in surrounding air to create amplified air, it allows for efficient operation with low air consumption. -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays approximately 3,000 items, including plastic piping components and pneumatic equipment that can be used simply by connecting to compressed air. The location is the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The flat nozzle is a blow nozzle that can be used simply by connecting it to a compressed air line. By expelling high-speed air close to the speed of sound from a small hole at the front, it generates a vacuum pressure at the front of the outlet, which draws in a large amount of surrounding air from behind, creating a high-thrust, flat blowing flow. It is used in scenes where you want to approach a flat surface. -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays approximately 3,000 items including plastic piping components and pneumatic equipment that can be used simply by connecting to compressed air. It is located in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8th Floor

• Pneumatic Equipment

The Jet Blower is a palm-sized air volume amplifier that generates a powerful vacuum pressure by blowing compressed air from slits provided along the inner wall of the main body, attracting a large amount of surrounding air from one side, while expelling a large volume of amplified air from the other side. With a duct hose... It can be used for dust collection and retrieval of garbage, smoke, and particulate or fibrous materials, as well as for pneumatic conveying. Without a duct hose... It can be used for draining water after cleaning products or parts, as well as for drying, cooling, and blowing away cutting chips and debris. The 740-19SUS is an inline model that allows for hose attachment. -------------------- The Ariake Satellite Showroom showcases approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "see," "touch," "compare," and "verify." It is located in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 3-6-11 Ariake, Koto-ku, Tokyo, TFT Building, East Wing, 8F

• Pneumatic Equipment

The Jet Blower is a palm-sized air volume amplifier that generates a powerful vacuum pressure by blowing compressed air from slits provided along the inner wall of the main body, attracting a large amount of surrounding air from one side while expelling a large volume of amplified air from the other side. With a duct hose... It can be used for dust collection and recovery of garbage, smoke, and particulate or fibrous materials, as well as for pneumatic conveying. Without a duct hose... It can be used for draining water after cleaning products or parts, as well as for drying, cooling, and blowing away cutting chips and debris. The 740-09SUS is a model dedicated to blowing. -------------------------------- The Ariake Satellite Showroom, based on the concept of "see," "touch," "compare," and "verify," displays approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-chome 6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and discharging it. "Round Blow" can be used in two roles as a vacuum system or a powerful air blow device. It is made of durable stainless steel. -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is located in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 3-6-11 Ariake, Koto-ku, Tokyo, TFT Building, East Wing, 8F

• Pneumatic Equipment

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device. Model: 760-100AL Nominal size: 100mm Pipe connection: 1/2"NPT -------------------- The Ariake Satellite Showroom is designed with the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. The location is in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-chome 6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device. Model: 760-64AL Nominal size: 64mm Pipe connection: 3/8"NPT -------------------- The Ariake Satellite Showroom is designed with the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device. Model: 760-50AL Nominal size: 50mm Pipe connection: 3/8"NPT -------------------- The Ariake Satellite Showroom is designed with the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto Ward, Ariake 3-chome 6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device. Model: 760-32AL Nominal size: 32mm Pipe connection: 1/4"NPT -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. The location is the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device. It is made of highly economical aluminum. -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto Ward, Ariake 3-6-11, TFT Building, East Wing, 8th Floor

• Pneumatic Equipment

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in widths ranging from 150mm to 900mm, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. It is made of stainless steel, which offers superior durability. -------------------- The Ariake Satellite Showroom is designed with the concept of "see," "touch," "compare," and "verify," showcasing approximately 3,000 items including plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to visit while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. The 750H series generates more powerful air compared to the 750 series. -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays approximately 3,000 items, including plastic piping parts and pneumatic equipment that can be used simply by connecting compressed air. It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to visit while attending exhibitions. ▼ Access 〒135-0063 3-6-11 Ariake, Koto-ku, Tokyo, TFT Building, East Wing, 8th Floor

• Pneumatic Equipment

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-90AL Effective Air Width: 900mm Overall Length: 940mm Pipe Connection: 1/4"NPT -------------------- The Ariake Satellite Showroom showcases approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "see," "touch," "compare," and "verify." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-75AL Effective Air Width: 750mm Overall Length: 788mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom features around 3,000 items, including plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is conveniently located in the TFT Building, near Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-chome 6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-60AL Effective Air Width: 600mm Overall Length: 635mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom features around 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is conveniently located in the TFT Building, near Tokyo Big Sight, making it easy to visit while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The Line Blow is an air tool that generates a uniform curtain-like air flow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-45AL Effective Air Width: 450mm Overall Length: 482mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom features approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-30AL Effective Air Width: 300mm Overall Length: 330mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom is designed with the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping parts and pneumatic equipment that can be used simply by connecting compressed air. It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to visit while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-15AL Effective Air Width: 150mm Overall Length: 180mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom features approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "See," "Touch," "Compare," and "Confirm." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-chome 6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-7.5AL Effective Air Width: 75mm Overall Length: 102mm Pipe Connection: R1/4 ーーーーーーーーーー The Ariake Satellite Showroom features around 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto City, Ariake 3-6-11, TFT Building, East Wing, 8F

• Pneumatic Equipment

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. The Ariake Satellite Showroom features around 3,000 items, including plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to visit while attending exhibitions. ▼ Access 〒135-0063 3-6-11 Ariake, Koto-ku, Tokyo, TFT Building, East Wing, 8F

• Pneumatic Equipment

The features of the Sanwa pneumatic equipment "Blow" series are that it generates an amplified flow by incorporating surrounding air in addition to compressed air. It is effective for various applications such as air curtains, water drainage, drying, and blowing away cutting chips, thereby improving manufacturing processes. The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting to compressed air. The location is the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 Tokyo, Koto Ward, Ariake 3-6-11, TFT Building, East Wing, 8th Floor

• Pneumatic Equipment

Just connect the compressed air! This is an experimental video of "Sanwa Pneumatic Equipment," which has been chosen for nearly 40 years in manufacturing sites. We have compiled videos utilizing the power of cooling and heat dissipation in a YouTube playlist. https://www.youtube.com/playlist?list=PLJfdHY6UGJsCCB98e-QGfcpVZgszyEGMc -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," showcasing about 3,000 items of plastic piping components and pneumatic equipment that can be used just by connecting compressed air. It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-chome 6-11, TFT Building, East Wing, 8th Floor

• Cooling system

Cabinet coolers reduce overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, various measuring instruments, etc., protecting precision machinery and instruments from malfunction or damage due to overheating. Additionally, the automatic exhaust mechanism keeps the inside of the cabinet in a pressurized state with cooling air, preventing the intrusion of dust and mist from outside the cabinet and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed. Model: 175-CC Minimum temperature*: -20°C Compressor guideline*: 3.7KW～ *Conditions apply; please refer to the catalog for details. ーーーーーーーーーー The Ariake Satellite Showroom showcases approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "see," "touch," "compare," and "verify." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to visit while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-chome 6-11, TFT Building, East Wing, 8F

• Cooling system

Cabinet coolers reduce overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, and various measuring instruments, protecting precision machinery and instruments from malfunction or damage due to overheating. Additionally, the automatic exhaust mechanism maintains a pressurized state with cooling air inside the cabinet, preventing dust and mist from entering from the outside and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed. Model: 195-CC Minimum Temperature*: -20°C Compressor Guideline*: 7.5KW～ *Conditions apply; please refer to the catalog for details. ーーーーーーーーーー The Ariake Satellite Showroom, based on the concept of "See," "Touch," "Compare," and "Confirm," displays approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. The location is in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Cooling system

The Kolder is a simplified spot cooler that applies the principle of vortex. It discharges ultra-low temperature air simply by connecting compressed air, without the need for a power supply or refrigerant gas. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, demonstrating particularly excellent effects in the processing of hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Model: 140-55SV Minimum Temperature*: -35°C Maximum Temperature Difference*: 55°C Compressor Recommendation*: 0.75KW and above *Conditions apply; please refer to the catalog for details. ーーーーーーーーーー The Ariake Satellite Showroom features approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "see," "touch," "compare," and "verify." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto Ward, Ariake 3-6-11, TFT Building, East Wing, 8F

• Cooling system

The Kolder is a simplified spot cooler that applies the principle of vortex. It discharges ultra-low temperature air simply by connecting compressed air, without the need for power supply or refrigerant gas. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, demonstrating particularly excellent effects in the processing of hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Model: 160-65SV Minimum Temperature*: -45°C Maximum Temperature Difference*: 65°C Compressor Recommendation*: 2KW～ *Conditions apply; please refer to the catalog for details. ーーーーーーーーーー The Ariake Satellite Showroom features approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is located in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Cooling system

The Kolder is a simplified spot cooler that applies the principle of vortex. It discharges ultra-low temperature air simply by connecting compressed air, without the need for power supply or refrigerant gas. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, and it is particularly effective for processing hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Model: 185-65SV Minimum Temperature*: -50℃ Maximum Temperature Difference*: 70℃ Compressor Recommendation*: 3.5KW～ *Conditions apply; please refer to the catalog for details. ーーーーーーーーーー The Ariake Satellite Showroom showcases approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Cooling system

The Kolder is a simplified spot cooler that applies the principle of vortex. It discharges ultra-low temperature air simply by connecting compressed air, without the need for power supply or refrigerant gas. A typical application of the generated cooling air is the removal of heat generated during processing of materials such as metals and plastics, and it is particularly effective for processing hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Model: 190-75SV Minimum Temperature*: -55℃ Maximum Temperature Difference*: 75℃ Compressor Recommendation*: 5KW～ *Conditions apply; please refer to the catalog for details. ーーーーーーーーーー The Ariake Satellite Showroom showcases approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Cooling system