中部産業 List of Products and Services

Caster-type Trailer TRJ ■□■Features■□■ It is inexpensive and most commonly used for light to medium loads. The front wheel casters are always in a free state, and the turning radius is not restricted. It uses towing casters (RGVJHW, RGVKHW). The wheels are equipped with radial bearings, and the turning section uses thrust bearings. Since the casters follow the condition of the running surface, they may cause swaying in the direction of travel. In particular, when the surface is inclined in the width direction of the dolly, the performance in following the towing vehicle is inferior. ■For more details, please contact us.

• Power Transmission Equipment

2WS Turntable Double Tire Specification Cart This is a sturdy cart. ■□■Features■□■ ■The cargo area is made of Japanese pine boards ■Double tire specification for low height and heavy load support ■Uses double 4.00-8 size no-puncture tires with hub specifications ■Maximum load capacity of 4500kg ■Adopts a 2WS turntable mechanism ■Supports heavy loads with double tires ■In tire selection, increasing the load generally requires a size increase, but to lower the height of the cargo area, double tires are used ■For more details, please contact us.

• Other conveying machines

2WS Turntable Type Parent-Child Cart This is a large transport cart with a canopy designed to carry and transport child carts. The cart structure features a low-floor design for the front and rear wheelbase, making it easier for the child cart to be loaded. Additionally, the doors at the left and right entrances serve as guide ramps. The raising and lowering of this ramp utilizes the force of springs and a balancer. ■□■ Features ■□■ ■ The left and right doors open and close, and the doors themselves serve as guide ramps for loading the child cart. ■ Tires are puncture-proof, using size 3.50-5 with a hub specification. ■ Equipped with a 2WS turntable mechanism. ■ External dimensions: 1850L × 1425W × 2210H ■ For more details, please contact us.

• Other conveying machines

2WS Knuckle Type 5-Ton Cart This is a transport cart designed for ultra-heavy loads, featuring a 2WS knuckle mechanism. ■□■ Features ■□■ ■ The height of the loading surface is specified, so the undercarriage has been reinforced to accommodate this. ■ Since the loaded items are circular, angles are installed at both ends of the loading platform. ■ The tires are puncture-proof, with double 5.00-8 hub specifications used for the rear wheels. ■ The front wheels use single 4.00-8 tires. ■ Maximum load capacity is 5000 kg. ■ Sturdy undercarriage provides stability. ■ The turning mechanism adopts a knuckle type that maintains the wheelbase, suitable for ultra-heavy loads. ■ The main body of the cart has been designed with the center of gravity in mind, moving the rear axle towards the center. ■ The rear axle features double puncture-proof 5.00-8 tires. ■ The undercarriage is treated with primer. ■ A bronze bushing is placed in the pin hole at the tip of the towing rod to accommodate frequent turning. ■ For more details, please contact us.

• Other conveying machines

4WS Cart with Spring Casters This cart is designed with vibration considerations. ■□■ Features ■□■ ■ To minimize vibration transmission while moving measuring instruments within the facility, it uses spring casters and zero-pressure hollow tires. ■ Four spring casters are linked to create a 4WS mechanism, accommodating narrow passageways within the facility. ■ The tires (wheels) use zero-pressure tires, which provide better cushioning than solid rubber wheels. ■ The cushioning mechanism (spring) absorbs vibrations and shocks on rough surfaces, reducing scratches and noise during product transport. ■ Starting resistance is also reduced, allowing for smooth movement. ■ The casters are equipped with coil spring caster 150J-ZERO-Y, and a relatively soft type of spring is selected. ■ For more details, please contact us.

• Other conveying machines

Cart with 4WS_2WS switching function This medium-load cart is equipped with a switching function, allowing it to be easily used not only for towing but also for manual pushing. ■□■ Features ■□■ ■ The cart can be towed by a powered vehicle from the receiving area to the production line, and then detached to be used as a manual push cart. Those who use it in this way will find the switching function beneficial. ■ Switching to a manual push cart can be done simply by raising the towing pole. Normally, when the cart is detached from the towing powered vehicle, the towing pole can get in the way, so it is lifted. This action disconnects the link, allowing it to be used as a "manual push cart." Since this is part of everyday operation, it can be considered a very simple switching function. ■ For more details, please contact us.

• Other conveying machines

4WS_2WS Switchable Caster Stainless Steel Cart This is a stainless steel cart with a switchable function for manual pushing. ■□■ Features ■□■ ■ Made entirely of stainless steel, including the casters Suitable for use in pharmaceutical, chemical, and food factories ■ A clean cart made with mirror-finished stainless steel can also be produced ■ Switching to a manual push cart can be done simply by raising the towing rod Normally, when the cart is detached from the towing power vehicle, the towing rod gets in the way, so it is lifted. This action disconnects the link, allowing it to be used as a "manual push cart." Since the daily operation becomes the control, it can be said that this is a very simple switching function. ■ For more details, please contact us.

• Other conveying machines

Automotive Parts Dedicated Transport Cart (Caster Type) / Cart with Drawer Mechanism ■□■Features■□■ ■Supplies parts to the production line by swapping the drawers of each tier. ■By removing the parts from the front half of the drawer and pushing it back, the drawer at the back comes to the front. ■Casters: 150mm wheels, with 2 swivel and 2 fixed. ■The tiers consist of two sliding shelves: the upper shelf (back side) and the lower shelf (front side). When retrieving parts: take them from the front sliding shelf, and when it is empty, push it back. This will cause the sliding shelf at the back to come forward, allowing for part retrieval. The opposite action is taken when placing parts. ■Regarding the part receiving jig, it was developed with the premise of being "easy to retrieve and secure during transport," through trial and error to determine the shape and position of the receiving part. ■Since heaters have many protrusions and quality control during transport is important, they were placed securely. ■For more details, please contact us.

• Other conveying machines

Dedicated transport cart for automotive parts (caster type) / Lifting cart with drawer mechanism ■□■Features■□■ ■Transports automotive parts in a mat shape to the assembly line via a pull-out shelf. There is a crane movement involved, and a bar for hanging hooks is installed. ■Equipped with 150mm wheels, with two swivel and two fixed casters. ■The drawer can be pulled out up to two-thirds, requiring a sturdy support at the base, so bearings are used to sandwich it vertically, and side guides are also installed horizontally for smooth operation. ■Stoppers to hold the drawers in place are installed on both sides of each level. Additionally, a stopper to secure all drawers is installed for crane lifting. ■For more details, please contact us.

• Other conveying machines

Long-Length Cargo Transport Trolley / 4WS Turntable Trolley This trolley solves the conflicting challenges of "long-length cargo transport" and "maneuverability" through its body shape and 4WS mechanism. ■□■Features■□■ ■For heavy load transport, it is equipped with a robust turntable and size 5.00-8 puncture-proof tires. ■Tires: Puncture-proof tires 5.00-8 ■The trolley shape has been designed to enable maneuverability. To transport long-length cargo that is nearly twice the size of the trolley base, the 4WS mechanism has been adopted to ensure it closely follows the travel path of the towing vehicle. ■When not loaded, a smaller trolley is preferable, so the trolley base has been shortened and the towing rod lengthened. ■For more details, please contact us.

• Other conveying machines

Irecta Pipe Compatible 4WS Unit A hand-pushed cart made from Irecta pipes can be modified to a 4WS cart by attaching the Irecta pipe compatible 4WS unit. This allows it to closely follow the towing vehicle and travel along almost the same path. It enables stable operation in narrow curved passages. ■□■ Features ■□■ ■ Casters: 4 swivel casters with 100mm wheels ■ The Irecta pipe compatible 4WS unit has all four wheels equipped with swivel casters, and the turning mechanism is connected front and back, left and right by rods, allowing the front and rear wheels to follow almost the same path. ■ If you want to use it as a hand-pushed cart, it is possible by releasing the front and rear wheels. * Carts equipped with this mechanism can also be manufactured. ■ For more details, please contact us.

• Other conveying machines

Air-filled Tire (Hub Type) Utilizes air pressure within the tire to cushion impacts from rough terrain and bumps. It is widely used in industrial vehicles and more. ■□■ Features ■□■ ■ Radial bearings are incorporated into the hub ■ The tire itself has a higher ply count (tire strength) ■ Compared to air-filled tires of the tubeless type, the tire, wheel, and hub are all more robust in the same size ■ More suitable for transporting heavy loads with in-house trailers than hand-pushed carts ■ Assembly to the cart is done via brackets through the axle, rather than using casters ■ While it cannot be easily attached to the cart body like a caster, it achieves a solid undercarriage ■ For more details, please contact us.

• Power Transmission Equipment
• Other Auto Parts

Hub-type puncture-proof tire for axles It has a higher load capacity than air-filled tires and is a robust solid tire. ■□■ Features ■□■ ■ The entire tire outer layer and interior are made of rubber, eliminating the need for air adjustments. ■ The hub-type puncture-proof tire uses JIS standard radial bearings in the hub bearing section, providing a strong structure. ■ It is optimal as a powerful wheel system for trailers used in internal transport. ■ For more details, please contact us.

• Power Transmission Equipment
• Other Auto Parts

No-Puncture Tire Axle Set ■□■Features■□■ ■Composition of hub-equipped tire and axle ■Attached to the main body of the cart via a bracket ■Generally sturdier construction than caster-type ■The no-puncture tire axle set begins with the concept of the cart, determining the necessary dimensions for production based on cart dimensions, cart weight, and load capacity. Chubu Sangyo provides appropriate axle sets. For details, please contact us.

• Power Transmission Equipment

No-Puncture Tire Axle Set (Double) This product is used as the undercarriage for heavy-duty transport carts, such as mold carts. ■□■ Features ■□■ If the maximum load of the single exceeds, consider upgrading the size or using a double. If size upgrade is not possible, we recommend the axle with hubs for double tires. ■ For more details, please contact us.

• Power Transmission Equipment

No-Puncture Tire 2WS Unit This is a 2WS unit for a turntable-type trailer used on premises. ■□■Features■□■ ■ The front wheels have a turning function (turntable), while the rear wheels are on a fixed axle. ■ Can make tight turns. ■ Smaller turning radius than knuckle-type, making manual alignment and operation easier when not being towed. ■ Simple structure with minimal maintenance required. ■ For more details, please contact us.

• Power Transmission Equipment

No-Puncture Tire 4WS Unit This is a 4WS unit for a turntable-type trailer used on premises. ■□■Features■□■ ■The front and rear wheels have a steering function (turntable), allowing both the wheels and axles to align with the direction of travel. ■A turntable is installed at the center of the axle, synchronizing the axle and wheels with the direction of travel during the trailer's turning. ■The travel paths of the front and rear wheels are nearly the same, enabling a smaller turning radius. ■For more details, please contact us.

• Power Transmission Equipment

Steel Plate No-Puncture Tire Caster ■□■Features■□■ ■No-puncture tire caster designed for heavy loads with a steel plate structure ■Ideal for the towing chassis of in-house trailers ■Available in two tire sizes: 3.00-5 and 3.50-5 ■For more details, please contact us.

• caster

Air-filled tires (hubless type) that reduce shocks from rough roads and bumps by utilizing air pressure inside the tire. ■□■Features■□■ ■ Widely used in daily life, including automobiles, bicycles, and agricultural machinery. ■ Hubless air-filled tires, like caster wheels, incorporate commercial bearings into the wheel and are commonly used in caster fittings. ■ Compared to caster wheels, hubless air-filled tires offer superior elasticity due to air pressure and are used in hand trucks in environments with poor road conditions. ■ The hubless type often features smaller diameter tires, while larger diameters are designed with a proper hub attached to the wheel. ■ HC2.50-4 HL, HC3.00-4 HL, HC3.50-5 HL, and HC4.00-8 HL are tires that use Bridgestone tires for the tubes. ■ Individual components such as tires and tubes are also available. ■ For more details, please contact us.

• Power Transmission Equipment

Tires with a rubber outer layer and internal structure that are literally puncture-proof and do not require air adjustment (hubless type) ■□■ Features ■□■ ■ Solid tires ■ Allowable load is greater than that of air-filled tires ■ Hubless type puncture-proof tires, like caster wheels, are equipped with commercial bearings in the wheel and are widely used in caster fittings - Puncture-proof tires (hubless) have inferior elasticity compared to air-filled tires but excel in load-bearing capacity and are used in heavy manual transport carts - Above all, the fact that they do not puncture is appreciated by users ■ Hubless types often have small diameter tires, and when they become larger in diameter, they are of the type that incorporates a proper hub into the wheel - Used in in-plant transport trailers ■ For more details, please contact us.

• Power Transmission Equipment

Zero Pressure Tire (Hubless Type) ■□■Features■□■ ■Hollow Tire ■The tire has a hollow structure inside, and when a load is applied, the air in the hollow section escapes through small holes provided in part of the tire, keeping the hollow section at constant pressure. ※A representative tire is the Zero Pressure Tire. ■The inside of the tire is hollow and maintains constant internal pressure. Therefore, it has excellent elasticity and high vibration absorption, resulting in quiet operation. ■There is absolutely no worry about punctures. ■For more details, please contact us.

• Power Transmission Equipment

Tire with gel injected into the inner tube of an air-filled tire ■□■Features■□■ ■Transforms air-filled tires into puncture-proof tires ■Sizes correspond to those of air-filled tires ■Type that injects gel through the tube valve of commonly used air-filled tires ■Can be injected into tubeless types based on load conditions ■A tire that is an intermediate between puncture-proof tires and air-filled tires ■About the gel - Injects a highly elastic "thermoplastic resin (air-free gel)" - Absorbs shocks from slightly rough surfaces and reduces vibrations to the cargo - Maintenance-free type that does not require air pressure adjustment and eliminates worries about punctures ■If the desired size for a puncture-proof tire is not available, it can be substituted by injecting gel into an air-filled tire of the desired size. Mainly suitable for smaller diameter types. For details, please contact us.

• Power Transmission Equipment

Foam Urethane Tire ■□■Features■□■ ■The foam urethane tire (solid) is made of urethane foam (expanded), providing elasticity similar to air-filled tires and is designed to be puncture-proof. ■Available in two sizes: 6 1/2 x 2-3 and 2.50-4. ■For more details, please contact us.

• Power Transmission Equipment

Air-filled Tires and Tubes ■□■Features■□■ Tires and tubes are consumables. At Chubu Sangyo, we offer a range of industrial vehicle tires and tubes, primarily from Bridgestone. ■ Air-filled tires and tubes come in various sizes, and we often receive requests for tires only or tubes only. ■ We will introduce products from Bridgestone and overseas manufacturers to match your size requirements. ■ We have two types of tubes available: straight valve type and L valve type, so please check the shape you are using. * When inquiring, please specify HC2.50-4 tire and 2.50-4 tube. At Chubu Sangyo, we primarily handle the sale of tires and tubes manufactured by Bridgestone. Please feel free to consult us about agricultural tires as well, not just industrial ones.

• tube
• Other Auto Parts

Air-filled Tire Caster ■□■Features■□■ ■Utilizes air pressure within the tire to cushion impacts from rough terrain and bumps ■Can be attached to a cart by combining with caster brackets ■Used in many applications in daily life, including automobiles, bicycles, and agricultural machinery ■Incorporates air-filled tires into casters via hubless wheels ■The tire caster is compatible with all standard solid wheel casters, allowing for the use of existing caster bracket mounting holes ■For more details, please contact us.

• Other Auto Parts

No-Puncture Tire Caster for Small-Diameter Hand-Pushed Carts ■□■Features■□■ ■Maximum load capacity is greater than that of air-filled tires (however, cushioning is inferior). ■Higher allowable load than air-filled tires, no worry about punctures, and no maintenance required for air adjustments. ■Cushioning depends on the elasticity of the rubber itself. ■No-puncture tire casters are more elastic compared to general solid wheel casters and can handle slightly rough surfaces. *Although elasticity is inferior to air-filled tire casters, the allowable load is greater. ■For more details, please contact us.

• caster

■□■Features■□■ Zero Pressure Tires are puncture-proof yet offer cushioning similar to air-filled tires. They are a new type of tire. The tire structure is hollow and maintains internal pressure through small holes. ■ While being puncture-proof, they have cushioning close to that of air-filled tires. The maximum load does not reach that of puncture-proof tires, but they are suitable for light to medium loads (not for use with forklifts). ■ Comparison of Zero Pressure Tires and Puncture-Proof Tires Zero Pressure Tires (Hollow) Main Use: Light to Medium Load Transport Maximum Load kg: 70-160kg (Outer Diameter 250mm) Weight: Slightly Light Vibration Absorption: Excellent Ride Feel: Soft Puncture-Proof Tires (Solid) Main Use: Medium Load Transport Maximum Load kg: 330-265kg (Outer Diameter 250mm) Weight: Heavy Vibration Absorption: Poor Ride Feel: Hard ■ For more details, please contact us.

• caster

With conventional caster stoppers, usability was poor, leading to frequent forgetfulness in applying the stopper. Therefore, we have installed a stopper mechanism that does not rely on caster stoppers. ■□■Features■□■ ■ Lightweight plastic cargo platform ■ Equipped with a foot-operated pedal under the handle to secure the wheels * This is primarily a position-holding device, similar to a car's handbrake ■ Utilizes silent casters for quiet operation and lightweight movement ■ The foot-operated stopper can be installed on the PLA150, 250, and 300 series ■ For more details, please contact us.

• Other conveying machines

A cart that can be parked safely with a foot stopper With conventional caster stoppers, usability was poor, leading to frequent forgetfulness in applying the stopper. Therefore, we have installed a stopper mechanism that does not rely on caster stoppers. ■□■Features■□■ ■The cargo platform is made of sturdy steel. ■A foot pedal is attached under the handle, which is used to secure the wheels with a stopper. *It is primarily a position-holding device, similar to a car's handbrake. ■For more details, please contact us.

• Other conveying machines

Drum Brake Type Stopper Cart With conventional caster stoppers, usability was poor, leading to frequent forgetfulness in applying the stopper. Therefore, we have installed a stopper mechanism that does not rely on caster stoppers. ■□■ Features ■□■ ■ The cart holds its position (stops) when you release the handle. ■ The cargo platform is made of plastic. ■ One type available is the hand stopper type. - It has a mechanism that applies the brake when you release the handle. - It is used in places like train stations for enhanced safety. ■ For more details, please contact us.

• Other conveying machines

Drum brake type stopper cart With conventional caster stoppers, usability was poor, leading to frequent forgetfulness in applying the stopper. Therefore, we have installed a stopper mechanism that does not rely on caster stoppers. ■□■ Features ■□■ ■ The cargo platform is made of sturdy steel ■ A large cargo platform type is also available ■ As one of the types, a hand stopper type is also available - The mechanism applies the brake when the hand is removed from the handle - This is used in places like train stations for enhanced safety ■ For more details, please contact us.

• Other conveying machines

Hand stopper-equipped cart (plastic) with wheel brake mechanism With conventional caster stoppers, usability was poor, leading to frequent forgetfulness in applying the stopper. Therefore, we have installed a stopper mechanism that does not rely on caster stoppers. ■□■ Features ■□■ ■ The cargo platform is made of plastic ■ A lightweight cart that can be loaded onto vehicles ■ A hand stopper type is also available as one of the options ・ The brake engages when you release your hand from the handle ・ The method of stopping the wheels uses a rubber part to press down ■□■ How to Use ■□■ Please release your hand from the handle. The cart will stop by pressing down on the rubber part of the wheels. ■ For more details, please contact us.

• Other conveying machines

Hand Stopper Equipped Cart (Steel Press) Wheel Locking Type With conventional caster stoppers, usability was poor, leading to frequent instances of forgetting to engage the stopper. Therefore, we have installed a stopper mechanism that does not rely on caster stoppers. ■□■ Features ■□■ ■ The cargo platform is made of sturdy steel ■ Large-sized carts are also available ■ One of the types offered is the hand stopper type ・ The mechanism applies the brake when the hands are removed from the handle ・ The method of stopping the wheels uses a rubber part to be pressed down ■□■ How to Use ■□■ When you remove your hands from the handle, the rubber part of the wheel is pressed down, and the cart comes to a stop.

• Other conveying machines

Hand & Foot Stopper Equipped Cart (Plastic) ■□■Features■□■ ■Safe to use with both hands and feet, making it a reliable cart for use in train stations and similar environments. - Users in the station entrance and exit industry appreciate its foldable design and lightweight plastic (cargo platform), making it suitable for vehicle transport. ■Double Safety - To prevent accidents in train stations, the stopper is double-layered: one is a hand stopper that activates the brake when you release your grip from the handle, and the other is a foot stopper that activates the brake when you step on the pedal at your feet. ■Easier and more reliable compared to traditional caster stoppers. ■For more details, please contact us.

• Other conveying machines

Two-Tier Shelf Cart (Plastic) ■□■Features■□■ ■The cargo area is made of plastic, achieving weight reduction. ■Shelves are available in two-tier and three-tier types, allowing you to categorize your items. ■Equipped with silent casters, utilizing radial bearings to eliminate play and ensure smooth movement of the drive components. ■The fittings are also made of plastic, further reducing the weight of the parts. ■For more details, please contact us.

• Other conveying machines
• furniture

2-tier and 3-tier shelf cart (steel press) ■□■Features■□■ ■The cargo area is made of steel and has a mat laid down. ■Available in 2-tier and 3-tier types. ■Cargo can be organized and transported by shelf. ■For more details, please contact us.

• Other conveying machines

Cart with basket frame (plastic) ■□■Features■□■ ■Various shapes of cargo that can easily fall ■Can be transported without worry when placed inside the basket ■The cargo platform is made of plastic for lightweight ■Cart with a wire mesh basket frame ■Surrounded by wire mesh at a height of 500mm to prevent cargo collapse ■One side of the cart has a door that can be opened on the upper half ■Equipped with silent casters ■For more details, please contact us.

• Other conveying machines

A cart with a basket frame that allows for transportation without worrying about how to load the cargo. ■□■Features■□■ ■The cargo platform is made of steel, and large sizes are also available. ■The cart is surrounded by a wire mesh at a height of 500mm to prevent cargo collapse. ■The upper half of both sides of the cart can be opened with doors. ■A 1000mm height type of wire mesh is also available in the lineup. ■For more details, please contact us.

• Other conveying machines

■□■Features■□■ ■Protects cargo from rain and prevents falling with the box ■Made of lightweight and durable nylon tarpaulin ■Easy to attach and detach with Velcro ■Foldable ■Available in two sizes: 565 and 686 ■Sheet box sold separately (compatible with carts other than set models) This cart allows you to transport cargo safely even in rainy weather by placing it inside the box (sheet box). It also helps prevent cargo from falling and can carry more than transporting on a regular flatbed (within the maximum load range). ■For more details, please contact us.

• Other conveying machines

Cart with load collapse guard (plastic) ■□■Features■□■ ■Prevents cargo from sliding on the platform ■Equipped with a load drop prevention guard (height 80mm) that covers the entire perimeter of the cart's platform ■Allows for safe transportation ■For more details, please contact us.

• Other conveying machines

Cart with Load Belt (Plastic) ■□■Features■□■ ■By securing the load with a belt, the cart and the load are fixed together, allowing for stable transportation without wobbling. ■In the case of high stacking or unstable shapes of cargo, the load can be tightened with the push of a button using the belt. ■For more details, please contact us.

• Other conveying machines

A cart with a welded structure that withstands harsh use ■□■Features■□■ ■Heavy in weight, but a sturdy cart ■The use of angle steel L5×50×50 in the framework provides a robust structure ■Since it is a sturdy cart, it can be used for a long time with only the casters needing to be replaced ■Ideal for environments with intense usage, such as logistics centers and factories *However, the weight of the cart itself is heavier compared to standard carts. ■For more details, please contact us.

• Other conveying machines

A two-wheeled cart (lever cart) that is ideal for the beverage industry, delivery industry, and more, offering excellent maneuverability. ■□■Features■□■ ■ Utilizes the principle of leverage, allowing for easy maneuverability. ■ Leverage principle makes unloading easy. ■ The wheels serve as the fulcrum, with the load placed on the scoop plate acting as the point of action, and the handle side functioning as the point of force, utilizing the principle of leverage. ■ Known as "neko-sha/cat cart" because it can navigate narrow alleys like a cat. ■ Allows for the transport of heavy loads through the use of leverage. ■ Can navigate minor bumps and uneven surfaces. ■ Can stop in a compact space. ■ For more details, please contact us.

• Other conveying machines

Can also be used as a storage location! Basket cart (roll box pallet) ■□■Features■□■ ■A cart with casters surrounded by fences on three sides and an opening on one side, combining cart functionality and pallet functionality. ■In warehouses, it can store loaded goods as is, and transportation can be done by loading it directly onto trucks, allowing for unloading at the destination without any changes. ■Highly versatile and very convenient, making it widely used. ■For more details, please contact us.

• Other conveying machines

A cart that reduces the bothersome wheel noise during operation by using silent casters. This product has recently been adopted by many transportation companies. ■□■Features■□■ ■ By adopting a new design for the casters and table, it achieves 20% quieter operation, 40% lighter running weight, and 20% lighter self-weight. ■ In particular, the casters use radial bearings, which eliminate play and allow the drive components to move smoothly. ■ The fittings are also made of plastic, contributing to the overall weight reduction of the parts. ■ Ideal for use in offices, factories, and logistics centers where the noise of the cart is a concern. ■ For more details, please contact us.

• Other conveying machines