中部産業 List of Products and Services

Trolley with Tire Casters (Plastic) ■□■Features■□■ ■The cargo platform is made of plastic ■Equipped with air-filled tire casters that excel in shock absorption ■Absorbs shocks from slightly rough surfaces and reduces vibrations to the cargo ■Tire color is gray, preventing floor stains ■Air-filled tires have superior characteristics compared to shock-absorbing casters (with shock-absorbing mechanisms) ■For more details, please contact us.

• Other conveying machines

Even on slightly rough surfaces, air-filled tires absorb shocks! ■□■Features■□■ ■Large steel cart ■Equipped with air-filled tire casters that excel in shock absorption ■Absorbs shocks from slightly rough surfaces, reducing vibrations to the cargo ■Uses large diameter 2.00-4 air-filled tires (outer diameter 208 mm) ■Air-filled tires have characteristics that surpass those of cushioning casters (with cushioning mechanism) ■For more details, please contact us.

• Other conveying machines

Even on slightly rough surfaces, air-filled tires absorb shocks while in motion! Puncture-proof tire caster cart ■□■ Features ■□■ ■ Tire color is gray, preventing floor stains ■ The cargo platform is made of plastic ■ Puncture-proof tires ■ Equipped with tire casters infused with heat-resistant resin (AFG) that provide cushioning similar to air-filled tires ■ Absorbs shocks from slightly rough surfaces and reduces vibrations to the cargo ■ For more details, please contact us.

• Other conveying machines

Cushioned by springs equipped in the caster fittings! A cart that eliminates worries about flat tires with air-filled tires. ■□■Features■□■ ■The cushioned casters use coil springs in the cushioning mechanism, which absorbs shocks from the road surface. ■I believe anyone has experienced cargo bouncing on the platform and falling off, but this can be improved by softening it even slightly. ■If the cargo consists of sensitive items that dislike vibrations, using it in conjunction with cushioning mats will be even more effective. ■For more details, please contact us.

• Other conveying machines

Stainless Steel Caster Cart (Plastic) ■□■Features■□■ ■This product uses stainless steel for metal parts other than the plastic of the cargo platform and caster fittings, achieving lightweight design. ■The cart structure is resistant to rust even when washed with water. ■The cargo platform and caster fittings are made of plastic for weight reduction, while the handle and caster bearings (SUS440) and axle are made of stainless steel (SUS304). ■The grease used is suitable for food machinery. ■By using radial bearings for the casters, there is no play, and the drive components move smoothly. ■The fittings are also made of plastic, further reducing the weight of the parts. ■Ideal for use in food factories where noise from carts is a concern, as well as in seafood logistics centers and other environments with high moisture. ■For more details, please contact us.

• Other conveying machines

Standard cart with casters (plastic) ■□■Features■□■ ■The most commonly used cart Recently, plastic carts have become more in demand than steel carts ■The cargo platform is made of plastic, making it lightweight ■Integrated molding with numerous ribs on the underside enhances durability ■Good cost performance ■For more details, please contact us.

• Other conveying machines

Standard cart with caster (steel press) ■□■Features■□■ ■Sturdy steel construction ■The press cart has a robust structure due to the pressing of thin steel plates. It comes in various types and has a maximum load capacity superior to that of plastic carts. ■For more details, please contact us.

• Other conveying machines

Table lift cart with roller conveyor ■□■Features■□■ ■The table lift cart with roller conveyor has a roller conveyor installed on top of the table, making it easy to bridge to the line's roller conveyor. This is a modification example. ■During transport, the stopper is engaged for safe operation. It has a lifting function, allowing it to accommodate conveyor lines of different heights. ■Regarding the work-holding stopper, we designed it so that the stopper can be operated from the handle side, linking the operation lever to bring it closer. Pulling the lever causes the stopper to fall, allowing the load to be removed. Releasing it returns the stopper with a spring mechanism. For safety, the stopper is always in an upright position due to the spring force. ■For more details, please contact us.

• Other conveying machines
• lift

Elevating Platform Expansion and Modification Trolley ■□■Features■□■ ■The platform can be expanded to accommodate the size of the load. *However, this applies only to items deemed safe by Chubu Sangyo Co., Ltd. *The photo shows the platform area made of stainless steel to resist rust and corrosion. ■The trolley frame can also be extended and modified. ・In addition to expanding the platform, modifications can be made to stabilize the trolley. ・For long items, it is necessary to move the handle to the rear as it interferes with the load. This requires extending the trolley frame. ■For more details, please contact us.

• Other conveying machines

Parts Delivery Lift Trolley ■□■Features■□■ This is a lift table trolley specially modified for each level of the parts shelf trolley. Both trolleys are equipped with roller bearings for smooth movement. To ensure safety, bellows covers have been installed on the movable parts. Additionally, stoppers have been added to each shelf level. ■For more details, please contact us.

• Other conveying machines

Lifting Trolley with Load Retaining Frame ■□■Features■□■ ■Due to the instability of wheeled loads on the platform, a frame has been provided for stabilization. ■By using a dedicated lifting trolley, safe transportation and lifting operations can be performed. ■Additionally, to enhance the efficiency of moving loads, a bridging board has been installed for transferring to the opposite workbench. ■Two additional casters with swivel brakes ■Installation of a minimum position maintenance stopper ■Frame is removable ■For more details, please contact us.

• Other conveying machines

Low-floor lifting cart with roller conveyor ■□■Features■□■ ■A lifting cart that utilizes a low-floor table lift and a low-floor roller conveyor, achieving a roller top height of 120mm. ■The maximum height can be raised up to a roller top of 820mm. ■When loading cargo, the cargo is placed against the front cargo stopper, and a hook attached to the handle is used to secure the cargo with a band for transportation. ■For more details, please contact us.

• Other conveying machines

Folding Long Material Elevating Cart ■□■Features■□■ ■This is an elevating cart that makes it easy to feed long, thin steel plates into machines. ■The front part of the loading platform is designed to be foldable. ■When trying to feed thin steel plates into a machine, the machine's legs may prevent the cart from being brought close enough. Therefore, the front part of the loading platform has been extended, and it is designed to be foldable to minimize space when not in use. ■For more details, please contact us.

• Other conveying machines

Liquid Container Dedicated Lifting Trolley This trolley is designed to hold, lift, and transport liquid containers. ■□■ Features ■□■ It has added functions for stable and safe lifting and transportation. First, the front legs have been expanded to prevent interference on the opposite side (unloading area). Additionally, to enhance the holding power of the container, dedicated holding brackets have been installed in two locations vertically, and a method of securing with a belt has been adopted. This improves work efficiency and safety, making it a valuable dedicated trolley. ■ For more details, please contact us.

• Other conveying machines

Elevating Cart with Safety Fence for Up and Down Processes This cart safely elevates and transports parts between upper and lower processes. ■□■ Features ■□■ It has been modified for use as a bridge between the upper and lower processes. First, the width of the legs was expanded to accommodate the width of the products. Next, a safety fence was installed on the front legs. Additionally, a retractable stopper was added to the tip of the fork. As a result, work between the upper and lower levels can now be performed efficiently and safely. ■ For more details, please contact us.

• Other conveying machines

■□■Features■□■ ■Maximum load capacity: 120–150kg ■Self-weight: 19k–32kg ■Available in a foldable handle model ■The platform table of the cart can be raised and lowered, allowing for easy movement from workbenches, conveyors, etc., adjusted to the appropriate height, resulting in less strain. ■Operation is performed by activating the hydraulic cylinder via a foot pump, which raises the table. The descent can be stopped at any position by loosening the valve. *Due to its size designed for portability, this model is not suitable for options such as conveyors or installations on the table surface. ■For more details, please contact us.

• Other conveying machines
• lift

A type of lift cart commonly used in factories, warehouses, etc. ■□■Features■□■ It is safe with a drop prevention valve. Additionally, it is equipped with a device that doubles the lifting speed with a switch. The platform of the cart rises and falls, allowing for easy movement from workbenches, conveyors, etc., adjusted to the appropriate height, reducing strain. The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the table. For lowering, you can stop it at any position by loosening the valve. Various functions and safety devices are added for ease of use. ■Quick Lift Device By turning the pedal to the left and stepping on it, the lift-up speed will double. (Excluding LT-H250-8S) ■Safety Device The drop prevention valve prevents the table from dropping suddenly. It is installed on the port of the hydraulic cylinder. ■For more details, please contact us.

• Other conveying machines
• lift

High Lift Type Table Lift Cart (Manual) ■□■Features■□■ Compared to standard models, the maximum height of the platform rises nearly twice as high. Equipped with a descent prevention valve and a rapid lift device. The platform of the cart can rise and fall nearly twice as much as the standard type, making it suitable for high shelves. However, this means that the position of the descent endpoint is higher. The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the table. Descent can be stopped at any desired position by loosening the valve. Various functions and safety devices have been added for ease of use. ■Rapid Lift Device By turning the pedal to the left and stepping on it, the lift-up speed doubles. ■Safety Device The descent prevention valve prevents the table from descending rapidly. It is installed on the port of the hydraulic cylinder. ■For more details, please contact us.

• Other conveying machines
• lift

Corrosion-resistant stainless steel lift cart ■□■Features■□■ ■ Equipped with a drop prevention valve and a quick lift mechanism The main body of the cart is made of highly corrosion-resistant stainless steel, making it suitable for use in seafood processing plants, pharmaceutical factories, and more. The operation is primarily foot-operated, activating the hydraulic cylinder through a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. Additionally, various functions and safety devices have been added for ease of use. ■ Quick lift mechanism By turning the pedal to the left and stepping on it, the lift-up speed is doubled. ■ Safety device The drop prevention valve prevents the table from descending rapidly. It is installed on the port of the hydraulic cylinder. ■ For more details, please contact us.

• Other conveying machines

Elevating cart with bellows to ensure work safety ■□■Features■□■ The cart's loading table can be raised and lowered, allowing for easy movement from workbenches, conveyors, etc., adjusted to the appropriate height, resulting in less strain. The operation is primarily done by foot pedal, which activates the hydraulic cylinder via a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. The bellows enhance work safety and are perfect for dust prevention. It is compatible with all types. Additionally, the bellows can be attached and detached with Velcro. ■For more details, please contact us.

• Other conveying machines
• lift

Table Lift Cart - Non-Handle Type (Manual) ■□■Features■□■ ■No handle restriction, making it perfect for lifting long items. ■The non-handle type is ideal for carrying long items. It is compatible with all types and can also accommodate those with bellows. ■The cart's platform table rises and falls, allowing for easy movement from workstations or conveyors by adjusting to the appropriate height, resulting in less strain. ■Operation is primarily done by foot pedal, which activates the hydraulic cylinder via a pump to raise the table. For lowering, you can stop at any desired position by loosening the valve. ■For more details, please contact us.

• Other conveying machines
• lift

Battery-powered lifting table cart ■□■Features■□■ ■This is a lifting cart that operates the pump with a battery-powered motor to activate the hydraulic cylinder, allowing the platform to move up and down. ■The elevation of the cart's platform is performed electrically. You can control the ascent and descent using two buttons on a handheld remote. ■Equipped with a battery and charger, it can be charged anytime and anywhere as long as there is AC100V available. Additionally, the battery meter is color-coded in three colors for easy visibility of the remaining charge. ■For safety, it is equipped with a descent adjustment valve and an automatic load check valve. ■For more details, please contact us.

• Other conveying machines
• lift

Battery-operated lifting and self-propelled table lift cart ■□■Features■□■ ■ It is battery-operated and not only allows for the lifting and lowering of the platform but also enables the cart itself to move. ■ The lifting and lowering of the cart platform is done electrically, and the movement is also electric. The elevation is controlled using a handheld remote with two buttons for raising and lowering. It is battery-operated and comes with a charger, allowing it to be charged anytime and anywhere as long as there is AC100V available. Additionally, the battery meter is color-coded in three colors for easy understanding of the remaining charge. For safety, it is equipped with a descent adjustment valve and an automatic load check valve. ■ The movement utilizes the drive unit "Drive U," making the hand-pushed cart self-propelled. Smooth movement is achieved simply by pressing the start button. It employs a powerful electric brake for stopping. ■ For more details, please contact us.

• Other conveying machines
• lift

A lifting cart with an even lower height than smaller models, making work much easier. ■□■Features■□■ ■The loading table of the cart has a minimum height of 80mm, which is significantly lower compared to standard table lift carts. Standard table lift carts have a height of 210mm or more, making this model approximately 30% lower. ■It is ideal for transporting beer bottles and heavy loads from a low position. ■The low-height table lift is available in three types according to load and platform size, allowing for selection based on usage. The swivel casters come with brakes. ■Operation is primarily done by foot pedal, which activates the hydraulic cylinder via a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. ■For more details, please contact us.

• Other conveying machines
• lift

Elevating cart with lifting function and conveyor for smooth transportation ■□■Features■□■ ■The cart's loading table can be raised and lowered, allowing for easy movement from workbenches and conveyors at the appropriate height, reducing strain. ■The operation is primarily foot-operated, activating the hydraulic cylinder via a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. Various functions and safety devices have been added for ease of use. ■By incorporating a conveyor, labor-saving work efficiency is achieved. ■With work guides and stoppers, measures against load collapse can also be implemented. ■For more details, please contact us.

• Other conveying machines
• lift

Standard Mast-Type Table Lift Cart (Manual) ■□■Features■□■ ■The foot pedal raises the platform, and the valve knob controls lowering and stopping. The quick lift mechanism increases the lifting speed by 2 to 3 times. ■The cart's platform is supported by a mast (vertical column) during raising and lowering, allowing for a lower minimum position compared to standard table lifters, making it easier to load. Additionally, there are no obstacles under the platform except for the front legs, allowing the front legs to fit under shelves and reach deep into the back of the shelf. ■The platform table of the cart can be raised and lowered, and can be adjusted to match the height of workstations, conveyors, etc., resulting in a lighter load. The operation is primarily foot-pedal-based, activating the hydraulic cylinder through a pump to raise the table. Lowering can be stopped at any desired position by loosening the valve. Various functions and safety devices have been added for ease of use. ■Quick Lift Mechanism: Turning the pedal to the left and pressing down doubles the lift-up speed (excluding the model with a maximum load of 200kg). ■Safety Device: Automatic load check valve. ■For more details, please contact us.

• Other conveying machines
• lift

A lifting cart that achieves a minimum height of 95mm when the platform is lowered, making it easier to load items. ■□■ Features ■□■ ■ The cart's platform rises and falls supported by a mast (vertical column), allowing the lowest position of the platform to be lower and easier to load compared to ordinary table lifters. Additionally, by reducing the diameter of the front leg wheels and modifying the structure, a low height of 95mm can be achieved, making it convenient for transporting box pallets. ■ Since the platform table of the cart rises and falls, it can be adjusted to match the height of workstations, conveyors, etc., resulting in less strain. The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the table. For lowering, the valve can be loosened to stop at any desired position. Various functions and safety devices have been added for ease of use. ■ Quick lift device: By turning the pedal to the left and stepping on it, the lift-up speed doubles (excluding the maximum load type of 200kg). ■ Safety device: Automatic load check valve. ■ For more details, please contact us.

• Other conveying machines
• lift

Mast Type Forklift Trolley (Manual) ■□■Features■□■ ■It has a fork design that is optimal for pallet work. It can be adjusted to slide left and right. ■The fork rises and descends supported by the mast (vertical column), and the lower part of the loading platform is free of obstacles except for the front legs, allowing the front legs to fit under shelves and reach deep into the shelves. It is ideal for pallet work. ■The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the fork. Descent can be controlled by loosening a valve to stop at any desired position. Various functions and safety devices have been added for ease of use. ■Quick Lift Device: By turning the pedal to the left and stepping on it, the lift-up speed doubles (excluding the maximum load of 200kg type). ■Safety Device: Automatic Load Check Valve ■For more details, please contact us.

• Other conveying machines
• lift

Battery-operated electric pump moves the hydraulic cylinder, allowing the platform to raise and lower. ■□■Features■□■ ■The platform table of the cart rises and falls electrically, enabling easy movement from workbenches, conveyors, etc., adjusted to the appropriate height, resulting in less strain. The operation is primarily done with a one-touch lever to raise and lower the table. Additionally, the ascent speed can be controlled by a soft mechanism. Various functions and safety devices are included for ease of use. ■The charger is mounted on the vehicle, allowing for charging anywhere there is a power source. AC100V charging. ■The remaining battery level is displayed on a three-color meter. ■Safety device: Automatic load check valve. ■For more details, please contact us.

• Other conveying machines
• lift

A lifter cart that raises the forks by pedaling the handle and can lower or stop them by opening and closing the valve knob. ■□■Features■□■ ■The forks of the cart can rise and fall, allowing for movement between shelves at the appropriate height with minimal effort. ■Operation is primarily achieved by pedaling the handle, which activates the hydraulic cylinder via a pump to raise the forks. Lowering can be done by loosening the valve, allowing it to stop at any desired position. Various functions and safety devices are included for ease of use. ■Quick lift device: By switching modes, the lift-up speed is doubled. ■Safety device: Automatic load check valve. ■For more details, please contact us.

• Other conveying machines
• lift

Battery-operated electric pump drives the hydraulic cylinder, allowing the lift cart to move the platform up and down. ■□■Features■□■ ■The forks of the cart can be raised and lowered, making it easy to move between shelves at different heights with minimal effort. ■Operation is primarily done by pressing the up and down buttons, which activate the hydraulic cylinder via the pump to raise or lower the forks. When you release the button, it stops at that position. Various functions and safety devices have been added for ease of use. ■Equipped with a charger, it can be freely charged wherever there is a power source. Comes with a 2m cord reel. AC100V. ■Battery level is indicated by a three-color display meter. ■For more details, please contact us.

• Other conveying machines
• lift

A cart convenient for moving equipment with a fork that can be inserted into one-sided pallets or the bottom surface. ■□■Features■□■ ■To accommodate various one-sided pallets, we offer a wide range of sizes. Sizes for double-sided pallets (1100mm) are also available. ■The operation is primarily done by pulling the handle towards you to raise the fork, lifting the pallet off the ground for transport. At the destination, you can lower the fork by operating the lever on the handle, allowing you to remove the pallet. This is strictly for lifting during movement; if you require a lifting function, please refer to a forklift cart. Additionally, various functions and safety devices have been added for ease of use. ■Safety Devices Automatic load check valve, valve cleaning device ■For more details, please contact us.

• Other conveying machines

OA machines, vending machines, and other devices with minimal gaps at the bottom are best suited for transporting goods with a dedicated pallet cart. ■□■Features■□■ ■Available in 65mm, 39mm, and 45mm. ■This cart is convenient for moving low-floor pallets (single-sided type) as well as equipment like vending machines that allow forks to be inserted under their low bases. There are three types: low floor 65mm, 45mm, and 39mm. ■The operation is primarily done by pulling the handle towards you to raise the forks, lifting the load off the ground for transport. At the destination, you can lower the forks by operating the lever on the handle, allowing you to remove the load. This is strictly for lifting and lowering during movement; if you require a lifting function, please refer to a forklift cart. Various features and safety devices have also been added for ease of use. ■Safety devices include an automatic load check valve and a valve cleaning device. ■For more details, please contact us.

• Other conveying machines

Rust-resistant! A pallet transport cart that extensively uses stainless steel down to the finest details. ■□■Features■□■ ■This is a pallet transport cart that extensively uses stainless steel down to the finest details. ■It is highly resistant to rust and has exceptional durability compared to steel. It is also recommended for use in clean environments, making it ideal for food factories, pharmaceutical factories, and more. ■Operation is primarily done by pulling the handle towards you to raise the forks, lifting the load off the ground for transport. At the destination, you can lower the forks by operating the lever on the handle to release the load. This is strictly for lifting and lowering during movement; if you require a lifting function, please refer to a forklift cart. Additionally, various functions and safety devices have been added for ease of use. ■Safety devices: Automatic load check valve, valve cleaning device. ■For more details, please contact us.

• Other conveying machines

Pallet-specific transport cart for noise control in quiet work environments ■□■Features■□■ ■This cart is convenient for moving pallets (single-sided type) and equipment that can be inserted with forks from the bottom. ■The operation primarily involves pulling the handle towards you to lift the forks, which raises the pallet off the ground for transport. At the destination, you can lower the forks by operating the lever on the handle, allowing you to remove the pallet. This is strictly for lifting during transport; if you require a lifting function, please refer to a forklift cart. Additionally, various functions and safety devices have been added for ease of use. ■Safety device: Automatic load check valve and valve cleaning device. ■The low-noise design reduces the noise that can be bothersome to the ears when inserting and removing pallets. It is recommended for use in quiet factory environments, factories adjacent to residential areas, and for pallet work on mezzanines where noise is a concern. ■For more details, please contact us.

• Other conveying machines

Hand truck equipped with a hand stopper, foot stopper, and wheel chock, with a cooling cover. ■□■Features■□■ ■Designed for use in stations with strict safety regulations. It eliminates human error. We have balanced safety, lightweight design, and strength in its construction. In particular, the framework of the cooling cover has been made lightweight. ■This hand truck features a stopper structure. In places where it interacts with the general public, such as stations, safety is a priority, and the person transporting must go ahead and pull the hand truck. Therefore, the area under the handle needs to have swivel casters. However, this means that the handle stopper cannot be engaged because the casters need to pivot. To address this, we decided to link the handle section to the fixed caster on the opposite side of the handle to secure it. Similarly, the foot stopper does not hold the wheels but uses a hammer lock that secures it to the ground for the same reason. ■For more details, please contact us.

• Other conveying machines

Low-floor hand truck with hand brake for ticketing machines used at airports ■□■Features■□■ ■Reducing the wheel diameter lowers the floor height but increases starting resistance. ■A hand truck that flexibly utilizes ticketing machines within the airport. - Keeps the height of the ticketing machine as low as possible and is equipped with a hand stopper and foot stopper for safety. - Uses low-floor heavy-duty casters embedded in the wheel box of the truck body, resulting in minimal gap between the truck and the floor. - The handle area uses larger diameter wheels in reverse. ■The key point is that it is low-floor and equipped with stoppers. - The structure extends the wheel box sideways or front and back to keep the loading platform as low as possible. - The casters on the swivel side are also low-floor heavy-duty casters. ■For safety, it is equipped with a double system: a handle stopper that stops when you let go of the handle, and a foot stopper that stops when you step on the pedal. *Both act as parking stoppers, similar to a car's handbrake. ■The hand stopper applies braking to a drum equipped on the wheel, while the foot stopper presses down on the rubber part of the wheel.

• Other conveying machines

Low Bed Cylinder Transport Cart ■□■Features■□■ ■This cart is designed for transporting cylindrical loads, featuring a low bed design for easy loading and unloading. ■The wheels are mounted protruding sideways, using wheels with an outer diameter of 200mm. ■Casters: 200mm, swivel/fixed stopper: 2 each ■To lower the cart bed, the wheels are positioned outside the cart frame. The wheel box is designed to extend sideways to keep the bed as low as possible. ■Considering the turning range of the swivel casters, they protrude significantly sideways, so the stoppers are installed on the fixed side. ■For more details, please contact us.

• Other conveying machines

Station Platform Work Cart (Hand Stopper Specification) ■□■Features■□■ ■Generally available hand stopper carts do not come in large sizes, and custom orders are the only option. The main body is made of welded steel materials and plates, with a custom hand stopper added. Additionally, it is designed for use in station work, allowing it to be pulled by hand. ■In places where the general public interacts, such as stations, safety is a priority. The person transporting the cart must go ahead and pull the cart. Therefore, the area under the handle needs to have swivel casters. However, this means that the handle stopper cannot be applied because the casters need to pivot. To address this, we decided to link the handle section to the fixed caster on the opposite side of the handle to secure it. The method of securing the wheels is designed to be a wheel-holding type. ■For more details, please contact us.

• Other conveying machines

Cart for transferring electronic components to a line conveyor ■□■Features■□■ ■The components are secured with a stopper to prevent movement on the conveyor, and to further prevent vibrations during transport, anti-vibration rubber is used under the conveyor base. ■This cart protects electronic components with anti-vibration rubber. The conveyor base is supported by four anti-vibration rubbers, which helps to prevent vibrations during transport. Additionally, when transferring components to the line conveyor, any slight difference in height can affect the components, so leveling is done with adjustable bolts under the conveyor base. ■For more details, please contact us.

• Other conveying machines

Hand truck for loading onto transport trucks from within the bank ■□■Features■□■ ■Multiple drawers, using lightweight materials except for the frame of the cart ■Casters: 130mm with 2 swivel locks and 2 fixed ■Drawers: 8 ■Doors: Double-opening with locks ■Efforts were made to reduce the weight of the cart. - The bottom frame and handle, which require strength as a cart, are made of steel pipes, while the columns of the upper framework are made of aluminum. - The panels (exterior boards) are made of plastic material, and the drawers are made of corrugated plastic. - Thanks to innovative materials, it is extremely lightweight. ■For more details, please contact us.

• Other conveying machines

Hand truck for loading onto transport trucks from inside the bank ■□■Features■□■ ■The top cover and side covers open, providing a large opening. Lightweight materials are used for everything except the frame of the hand truck. ■External dimensions: 933W × 586D × 1063H ■Casters: 130mm with swivel brakes/fixed, two of each ■Doors: Top cover and side covers open/close with locks ■Confirmation window available ■Efforts have been made to reduce the weight of the hand truck. - The bottom frame and handle, which require strength as a hand truck, are made of steel pipes, while the columns of the upper framework are made of aluminum. - The panels (exterior plates) are made of plastic material, resulting in an extremely lightweight design due to material innovation. ■For more details, please contact us.

• Other conveying machines

Fish Market Transport Cart ■□■Features■□■ ■The floor material is made of Apitong wood. ■It has excellent abrasion resistance and water resistance. ■Can be manufactured with either a steel frame or a stainless steel frame. ■External dimensions: 1000W × 1600L × 900H ■Casters: 200mm swivel/fixed, 2 each ■With floorboard ■The loading platform floorboard is made of water-resistant Apitong wood. In the seafood industry, wooden boards are used instead of steel plates for the floorboard. This is because a water film on a steel plate can make the cargo slippery. Therefore, wooden boards are used, but they must not rot, which is why Apitong wood, which contains a lot of oil, is used. This cart uses it for both the floorboard and the backboard. ■For more details, please contact us.

• Other conveying machines

Two-Tier Shelf Transport Cart for Work Use ■□■Features■□■ ■Standard two-tier carts cannot withstand the load, so this was custom-made. With a welded structural design, it offers excellent durability for commercial use, allowing for safe operation. Standard carts are prone to damage when subjected to excessive loads, but this type can handle it. ■Shelf: Two-tier structure ■Casters: 130mm swivel with stopper/fixed, 2 each ■Corner rubber included ■Corner rubber has been attached to the corners of the cart (upper and lower tiers). In workspaces, carts often come into contact with walls and shelves, which can cause damage. This was installed to mitigate that. ■For more details, please contact us.

• Other conveying machines

Transport cart with a slip writing table ■□■Features■□■ ■When storing and retrieving items in a warehouse, a slip is always required. Having a work table nearby makes this process more convenient. The table has been attached to the handle section to improve usability. ■Casters: 130mm, with 2 each of swivel locks/fixed ■Includes a slip writing table ■With the presence of a work table, the cart can be used not only for transporting goods but also for assembly work, slip processing, as a step stool, and packaging tasks, among other things. It becomes an even better tool. ■For more details, please contact us.

• Other conveying machines