KEL List of Products and Services

This is a backplane compatible with PICMG 2.0 R3.0. It is a 3U type (with a physical minimum width), and the system slot position is on the right side. The power supply features our proprietary screw terminal. (It is also possible to use an ATX power connector. *Fully implemented product.)

This is a packet-switching backplane compliant with the PICMG2.16R1.0 specification. The wiring configuration is of the dual type, and the system slot position is of the right-side type. There are 8 slots. It is equipped with connectors for slot-in power supply.

This is a rear I/O adapter compliant with the PICMG 2.3 R1.0 and PICMG 2.4 R1.0 standards. The RP5 housing type is available in three types: R2.1 (Type B), with snap latch, and R3.0 specifications (Type AB).

This is a palette-type bridge board compatible with the PCI to PCI Bridge Specification Rev. 1.0 and PICMG 2.6D0.1. It allows for the selection of system slot positions (left or right) and two types of IDSEL connection products (IDSEL = AD24 or AD25).

This is a J1 type backplane compliant with the VMEbus Rev.C specification. We offer 12 types ranging from 3 to 21 slots. Our unique screw terminal is adopted, and the daisy chain jumper can be set from both sides of the board.

This is a backplane compatible with PICMG 2.0 R3.0. It is a 3U type, with the system slot positioned on the right side. It has 3 slots available. The power supply features our proprietary screw terminal.

This is a backplane compliant with the PICMG 2.11 R1.0 specification. The board size is 6U type, and the system slot is of the right-side type. There are 8 slots. It is a backplane equipped with a connector for slot-in power supply.

This is a backplane compliant with the PICMG2.17R1.0 standard. The wiring configuration is centralized dual type. The system slot is of the right-side type. There are 10 slots. It is equipped with a connector for power supply that allows for the insertion of a slot-in power supply.

This is a backplane for termination implementation compliant with the PICMG 2.0 R2.1 standard. The board size is 3U type, and it has 8 slots. There are two types of system slots: right-side type and left-side type.

This is a hot-swappable backplane compliant with the PICMG2.1R1.0 specification. It is available in configurations of 3, 4, and 8 slots. Sizes of 6U and 3U (only for 3 and 8 slots) are available.

A backplane that implements an ATX power connector according to the PICMG 2.0 R2.1 specification. This allows for the use of inexpensive ATX power supplies for computers, enabling cost reduction of the equipment. The system slots are of the right-side type, with a total of 8 slots available. It also features our proprietary screw terminals.

This is a backplane compatible with PICMG 2.0 R3.0. It is equipped with a dedicated bridge board that supports 32-bit/64-bit specifications on the back of the backboard. The secondary side can also share with daughter boards, and all slots except for the system slot can be used as peripheral slots. (Number of slots: 14) The power supply features our proprietary screw terminal.

This is a termination board for the PICMG 2.0 R2.1 backplane. There are two types of implementation surfaces: rear side and front side, and two types of compatible systems are available for 32-bit and 64-bit.

This is a dual-spec backplane compliant with the PICMG 2.7D0.5 standard. The board size is 6U type on the right side. There are 16 physical slots.

This is a backplane that conforms to PICMG2.5R1.0. The board size is 6U type, and there are two types of system slots: 4 and 8 slots. The system slots are of the right-side type. It incorporates specifications for both computer and telephony functions.

This is a backplane for PICMG2.0R2.1. It is of the 3U type and offers system slots in both right-side and left-side configurations. The number of slots available is 4, 6, or 8. The power supply features our proprietary screw terminal.

This is a J2 type backplane compliant with the VMEbus Rev.C standard. We offer eight types ranging from 3 to 21 slots. It features our proprietary screw terminals, with column B wired for 32-bit expansion, while columns A and C are open.

This is an I/O type backplane for the VME bus. It is designed with consideration for crosstalk and noise characteristics. It features our proprietary screw terminals.

This is a backplane compatible with the PCI bus. The components are made in Japan, ensuring high quality and stable supply. It has 4 slots available.

This is a backplane compatible with the ISA bus. It uses domestic components and is a series that offers high quality and stable supply. It has 4 slots available.

This is a backplane compatible with PICMG PCI/ISA buses. It is equipped with 4 slots for PCI bus and 4 slots for ISA bus. All components used are domestically produced, ensuring high quality and stable supply.

This is an optional panel used for the ECR series and VCR series. The panel protects the front of the bus rack. We provide a front panel with a handle and a filler panel to fill the gap. It is compatible with 3U and 6U sizes, and the front panel is available in 13 different widths.

This is an insulating component used when installing a backplane on our ECR series racks.

This catalog is the product handbook of KEL Corporation, a specialized manufacturer of industrial connectors. It features a wide range of products, including "floating connectors" equipped with mechanisms to absorb vertical and horizontal errors that occur when mounting connectors on printed circuit boards, as well as "crimp connectors" and "connectors for ultra-fine coaxial cables." Our company delivers cutting-edge technology proposals and high-performance products in the field of connection technology. [Contents (excerpt)] ■ Company Overview ■ Applications ■ Product List ■ Floating Connectors ■ Crimp Connectors and Waterproof Connectors ■ Connectors for Ultra-Fine Coaxial Cables ■ Half-Pitch Connectors *For more details, please refer to the PDF document or feel free to contact us.

The improvement of productivity through high-performance semiconductors and automation is an essential element of industrial and technological innovation. We contribute to the promotion of sustainable industrialization through manufacturing. We handle a wide range of products, including racks and industrial connectors, for infrastructure equipment that requires high reliability and environmental resistance, many of which cannot be fully introduced here. Since our founding, we have aimed for original product development, emphasizing high reliability and high quality, and we respond to our customers' needs with cutting-edge connection technology and flexible adaptability. <Product lineup for this introduction> ■ Floating connectors ■ Connectors for fine coaxial cables ■ Connectors for crimp cables ■ Waterproof connectors