Suntex Co., Ltd. Product Lineup

Features ■ Equipped with Intel I225, 2.5Gbps 2.5GBASE-T compatible with 4 LAN ports ■ Supports PCIe x4 slot (PCIe 3.0, 8 GT/s) ■ Complies with IEEE 802.3at standard (PoE+), capable of supplying up to 25.5W/48V per port, with On/Off control function ■ Complies with IEEE 802.3bz (2500BASE-T), IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3i (10BASE-TX) standards ■ Supports teaming (fault tolerance, link aggregation (802.3ad), load balancing), with a maximum jumbo frame support of 9KB ■ Energy-efficient Ethernet with power management features ■ iSVR (integrated switching voltage regulator), IEEE 802.1q VLAN support ■ Operating temperature range of -25°C to 60°C

• Expansion Boards

Features ■ Matrix configuration with 4 HDMI 2.0 inputs and 2 HDMI 2.0 outputs ■ Supports resolutions up to 4K×2K@60Hz (YCbCr 4:4:4) ■ 3D pass-through support ■ Compliant with HDCP 2.2 / HDMI 2.0 ■ EDID copy from OUT port 1 ■ IR remote control compatible ■ RS-232 control compatible

• Other PCs and OA equipment

Features ■ Equipped with 4 PoE+ LAN ports powered by Intel Ethernet Server Adapter I350 ■ Energy-efficient with power management features, supporting Ethernet IEEE 802.3az (Energy Efficient Ethernet/EEE) and DMA core-lessing support ■ Achieves low power consumption with a single chip ■ Compliant with IEEE 802.3at, capable of supplying up to 25.5W/48V per port ■ Two LAN ports support bypass mode (hardware) ■ Optionally changeable to M12 connector specifications ■ Compliant with IEEE 802.1AS and supports IEEE 1588 high-precision time synchronization protocol (PTP) ■ Supports teaming, maximum 9.7K jumbo frames, and link aggregation (LAG) ■ Operating temperature range from -25°C to 70°C

• Expansion Boards

Features ■ 10GbE image processing board equipped with Intel XL710/Intel X550-AT2 10GBASE-T, featuring 4ch/2ch PoE+LAN and achieving a maximum bandwidth of 10Gbps ■ Compatible with PCIe x8 (PE-5004) and PCIe x4 (PE-5002) slots (PCIe 3.0, 8 GT/s) ■ Compliant with IEEE 802.3at standard (PoE+), capable of supplying up to 25.5W/48V per port, with On/Off control functionality ■ IEEE 1588 high-precision time synchronization protocol (PTP) and IEEE 802.3AS high-precision timing synchronization ■ Supports jumbo frames up to 9.7K and link aggregation (LAG) ■ Energy-efficient Ethernet with power management features, compliant with IEEE 802.3az (Energy Efficient Ethernet/EEE), and supports DMA core-lessing • NBASE-T technology capable (supports 2.5/5.0 GbE with CAT 5e/CAT 6 cables) ■ Operating temperature range of -25℃ to 55℃

• Expansion Boards

Features ■ Matrix configuration with 2 HDMI inputs and 2 HDMI outputs ■ Supports resolutions up to 4K×2K@30Hz (YCbCr4:4:4); 4K×2K@60Hz (YCbCr4:2:0) ■ 3D pass-through support ■ HDCP compliant ■ EDID copy from OUT port 1 ■ IR remote control ■ RS-232 control compatible

• Other PCs and OA equipment

Features ■ Compliant with SMPTE 2082-1, 2081-1, 424M, 292M, 344M, 259M, and DVB-ASI ■ SD/HD/3G/6G/12G-SDI inputs automatically detect data rates with multi-color lock LED indicators ■ Signal quality of SD/HD/3G/6G/12G-SDI inputs is locked with an indicator using a flashlight ■ Micro USB interface for firmware updates ■ Output switching for SDI OUT 1&2, 3&4 and output swing fine-tuning function via DIP switch (for 12S-104) ■ Uses an interlocked power plug to ensure stable DC supply ■ Automatic cable equalization up to 75m ■ Capable of automatic adaptation to different data rates

• cable

Features ■ Compliant with DP1.2a ■ Link rate HBR2/HBR/RBR ■ Supports SST or MST ■ Supports 1/2/4 lanes ■ HDCP compliant ■ Equipped with IN/OUT DP++ interface ■ HDMI 1.4 compliant receiver ■ HDMI 1.4 transmitter (AC coupled) ■ Supports all 3D formats defined by DP1.2a and HDMI 1.4 standards

• cable

Features ■ 3D compatible ■ HDCP compliant ■ Compliant with HDMI specifications ■ Supports high-resolution display up to 1080P@60Hz (12bit) and 4Kx2K@30Hz (8bit) ■ EDID copy from OUT1 ■ Allows securing necessary ports through cascade connection ■ CEC bypass from OUT1

• cable

Features ■ 3D compatible ■ HDCP compliant ■ Complies with HDMI specifications ■ Supports high-resolution display up to 1080P@60Hz (12-bit) and 4Kx2K@30Hz (8-bit) ■ EDID copy from OUT1 ■ Allows securing necessary ports through cascade connection ■ CEC bypass from OUT1

• cable

Features ■ 3D compatible ■ HDCP 2.2 / HDCP 1.4 compatible ■ Compliant with HDMI specifications ■ Supports high-resolution display up to 4Kx2K@60Hz (YCbCr 4:2:0 8/10/12/16bit and other 8bit) ■ EDID copy from OUT1 ■ Allows securing necessary ports through cascade connection

• cable

Features ■ 3D compatible ■ Compliant with HDCP 2.2/HDCP 1.4 ■ Compliant with HDMI specifications ■ Supports high-resolution display up to 4Kx2K@60Hz (YCbCr 4:2:0 8/10/12/16bit and other 8bit) ■ EDID copy from OUT1 ■ Allows securing necessary ports through cascade connection

• cable

Features ■ Extends 8K/30Hz, 4:2:0 or 4K/60Hz, 4:4:4 HDMI, USB 2.0, IR, RS-232 up to 40m using Cat 6a U/FTP 23AWG cable ■ Transceiver device ■ Local loopback ■ PoC (Power over Cable) ■ Supports HDMI 1.4/2.0 (HDR) ■ Compliant with HDCP 1.4/2.2/2.3 ■ USB 2.0, RS-232, IR extension ■ CEC pass-through ■ Rack mount kit included

• cable

Features ■ Extends 8K/30Hz, 4:2:0 or 4K/60Hz, 4:4:4 HDMI, IR, RS-232 up to 40m using Cat 6a U/FTP 23AWG cable ■ Transceiver device ■ Local loopback ■ PoC (Power over Cable) ■ Supports HDMI 1.4/2.0 (HDR) and HDCP 1.4/2.2/2.3 ■ RS-232 and IR extension ■ CEC pass-through ■ Rack mount kit included

• cable

Features ■ Maximum audio delay time of 2.7 seconds ■ Audio delay adjustment range of 10ms ■ Supports high-resolution display up to 1080P@60Hz ■ Compatible with 2ch PCM analog audio ■ Supports coaxial digital audio (PCM only) ■ Capable of converting SDI audio to analog or digital ■ Playback of digital audio signals at the bit level prevents degradation of sound quality

• Other information systems

Features ■ Maximum audio delay time of 2.7 seconds. Supports all sample rates (32K / 44.1K / 48K / 96K / 192KHz) ■ Audio delay adjustment range of 10ms ■ Supports 2-channel PCM analog audio ■ Supports coaxial digital audio ■ Compatible with compressed audio signals (HDMI, COAXIAL OUT only) ■ Can convert HDMI audio to analog or digital ■ Playback of digital audio signals on a bit-by-bit basis prevents degradation of sound quality

• Other information systems

Features ■ Width 260 × Height 79 × Depth 175 mm, 3.59 liters, Weight 3.8 kg ■ 14th/13th/12th generation Core i9/i7/i5/i3 CPU (RPL-S Refresh/RPL-S/ADL-S) ■ 2 DDR4-3200MHz (up to 64GB) ■ 1 DVI-I, 1 HDMI, 2 DP (supports 8K resolution), 4 independent display outputs ■ Expansion slots: 1 M.2 KeyB, 1 M.2 KeyE, 2 Mini PCIe ■ 2.5" HDD front access ■ 4 M.2 Key M front access (ECX-3000-PoES) ■ 6 USB3.2, 4 COM, 2 SIM Card ■ 2GbE / 2GbE + 4 PoE ■ Extended temperature support -40 to 75°C (35W CPU) / -40 to 55°C (65W CPU) ■ Wide DC input 9 to 50V ■ Software-controlled ignition key ■ Railway standard EN50155 certified

• Industrial PCs
• Process Control System
• Other information systems

Features ■ Maximum audio delay time of 2.7 seconds, compatible with all sample rates (32K / 44.1K / 48K / 96K / 192KHz) ■ Audio delay adjustment range of 10ms ■ Supports 2-channel linear PCM digital audio ■ Supports compressed audio signals when switching from digital audio input to digital audio output ■ Allows audio conversion between analog and digital simply by pressing the select button ■ Playback of digital audio signals at the bit level prevents degradation of sound quality

• Other information systems

Features ■ Width 286 × Height 210 × Depth 50 mm, 3 liters ■ Fanless, IP65 fully waterproof 304 stainless steel enclosure ■ Operating temperature -40 to 75℃ ■ Atom E3940 CPU ■ 2 USB 2.0, 2 RS232, 1 GLAN, 1 HDMI ■ 2 Mini PCI-E slots ■ M12 connector (with cable) ■ Wall mountable ■ IIoT gateway application

• Industrial PCs

Features ■ Width 286 × Height 210 × Depth 58 mm, 3.48 liters ■ Fanless, IP65 fully waterproof 304 stainless steel casing ■ Core i7-7600U/i5-7300U/i3-7100U CPU ■ 2 USB 2.0, 2 RS232, 1 GLAN, 1 HDMI ■ 2 Mini PCI-E slots ■ M12 connector (with cable) ■ Wall mount compatible ■ IIoT gateway application

• Industrial PCs
• Embedded Board Computers

Features ■ Width 286 × Height 210 × Depth 58 mm, 3.48 liters ■ Fanless, IP65 fully waterproof 304 stainless steel casing ■ Core i7-1185GRE/i5-1145GRE/i3-1115GRE CPU ■ 2 USB3.0, 2 RS232/422/485, 1 GLAN, 1 HDMI ■ 1 M.2 M key, 1 M.2 B key, 1 M.2 E key ■ M12 connector (with cable) ■ Wall mountable ■ IIoT gateway application

• Industrial PCs
• Embedded Board Computers

Features ■ Width 286 × Height 210 × Depth 58 mm, 3.48 liters ■ Fanless, IP65 fully waterproof 304 stainless steel casing ■ Core i7-1185G7E 1.8GHz ■ 2 USB3.0, 2 RS232/422/485, 1 GLAN, 1 HDMI ■ 1 M.2 M key, 1 M.2 B key, 1 M.2 E key ■ M12 connector (with cable) ■ Wall mountable ■ IIoT gateway application

• Industrial PCs

Features ■ Width 286 × Height 210 × Depth 58 mm, 3.48 liters ■ Fanless, IP65 fully waterproof 304 stainless steel casing ■ Core i5-1145G7E 1.5GHz CPU ■ 2 USB3.0, 2 RS232/422/485, 1 GLAN, 1 HDMI ■ 1 M.2 M key, 1 M.2 B key, 1 M.2 E key ■ M12 connector (with cable) ■ Wall mount compatible ■ IIoT gateway application

• Industrial PCs
• Embedded Board Computers

Features ■ Width 286 × Height 210 × Depth 58 mm, 3.48 liters ■ Fanless, IP65 fully waterproof 304 stainless steel casing ■ Core i3-1115G4E 2.2GHz ■ 2 USB3.0, 2 RS232/422/485, 1 GLAN, 1 HDMI ■ 1 M.2 M key, 1 M.2 B key, 1 M.2 E key ■ M12 connector (with cable) ■ Wall mountable ■ IIoT gateway application

• Industrial PCs
• Embedded Board Computers

Features ■ Compliant with HDMI 2.0 & HDCP 1.4/2.2 ■ Offers a total of 16 patterns ■ Supports a total of 7 timings (up to 4K+@60/RGB) ■ Battery status indicated by intelligent LED ■ Portable design, compatible with 9.0-volt alkaline batteries for up to 0.5 hours of operation ■ Simple interface

• EMC Testing

Features ■ Width 286 × Height 210 × Depth 58 mm, 3.48 liters ■ Fanless, IP65 fully waterproof 304 stainless steel casing ■ Celeron 6305E CPU ■ 2 USB 3.0, 2 RS232/422/485, 1 GLAN, 1 HDMI ■ 1 M.2 M key, 1 M.2 B key, 1 M.2 E key ■ M12 connector (with cable) ■ Wall mountable ■ IIoT gateway application

• Industrial PCs
• Embedded Board Computers

Features ■ Capable of upscaling and downscaling HDMI resolution from 1080P to 4K and from 4K to 1080P. Other resolutions are bypassed from input to output. ■ Supports HDCP 1.4/2.2 ■ Supports upscaling from 1080P to 4K ■ Supports downscaling from 4K to 1080P (only supports bypass mode for 4K 4:2:0) ■ Bypass mode supports resolutions up to 4K/60Hz 4:4:4

• Image Processing Equipment

Features ■ Supports SD / HD / 3G-SDI format standards ■ Supports full HDMI including 10-bit video and 8 channels of embedded audio ■ Equalized loop SD/HD/3G-SDI output ■ 2-channel RCA jack audio output ■ Automatic detection of SD/HD/3G-SDI input

• Image Transmission Equipment

Features ■ 7U height, 19-inch rack chassis ■ Compliant with IPS-AC, IPS-AF, and IPS-M ■ Can accommodate up to 14 IPS devices (IPS-AC, IPS-AF, IPS-M) in a single chassis ■ Standard equipped with power supply and cooling fan unit ■ Ideal for applications with space constraints

• Image Transmission Equipment

Features ■ Compliant with HDMI specifications ■ Supports up to 1080P@60Hz (25-165MHz) ■ Interlocked power plug for stable DC supply

• Other image-related equipment

Features ■ IPS - Omni-controller for the entire AV over IP system ■ Compatible with all series of IPS-AC/AF/TC/TF/RC/RF ■ Adopts a web-based GUI for an easy-to-use interface ■ Real-time monitoring of the entire network system's status ■ Show & Schedule - Preset and schedule display of content and events ■ Rack mountable ■ NETGEAR certified. Recommended switches are M4300 and M4500 series

• Image Transmission Equipment

Features ■ 10.1-inch wide (16:10) IPS LCD panel ■ 1920x1200 high-resolution LCD ■ High resolution 3840x2160 (4K UHD) display (HDMI) ■ Ultra-high brightness 2000cd/m2 LED backlight ■ Wide viewing angle 85°/85° (L/R), 85°/85° (U/D) ■ Latest touch panel equipped for easy menu operation ■ 3D LUT loading, editing, and display ■ 8V DC output for powering cameras ■ HDTV Rec.709 color gamut adopted ■ 3G-SDI input x1, 3G-SDI output x1 ■ HDMI input x2, HDMI output x1 ■ Audio output (3.5mm) x1 ■ Shooting assist functions (False Color, Check Field, Zoom-in) ■ Can accommodate 2 batteries (F970)

• LCD display

Features ■IP transmission of 4K/60Hz 4:4:4 video signals over a 10 gigabit network ■Receiver (decoder) achieves a distance of up to 10km with fiber optic connection ■1x HDMI output ■Preview of input sources ■OSD (On-Screen Display) ■Extends video, audio, IR, RS-232, and USB over the network ■Seamless switching and zero latency ■Video mode support - matrix switch, multi-view display, video wall, KVM ■System configuration via an intuitive web-based GUI through IPS-M (controller) ■NETGEAR certified. Recommended switches: M4300 and M4500 series

• Image Transmission Equipment

Features ■ 4K/60Hz 4:4:4 video signal transmitted via 10 Gigabit network ■ Receiver (decoder) connects with standard Cat 6a cable, distance up to 100m ■ 1x HDMI output ■ Preview of input sources ■ OSD (On-Screen Display) ■ Extends network connections for video, audio, IR, RS-232, and USB ■ Seamless switching and zero latency ■ Supports video modes - matrix switch, multi-view display, video wall, KVM ■ System configuration via intuitive web-based GUI through IPS-M (controller) ■ NETGEAR certified. Recommended switches: M4300 and M4500 series

• Image Transmission Equipment

Features ■ IP transmission of 4K/60Hz 4:4:4 video signals over a 10-gigabit network ■ Transmitter (encoder), fiber connection, up to 10KM distance ■ Supports HDMI 2.0 and DisplayPort 1.2 inputs ■ Preview function for input sources ■ OSD (On-Screen Display) ■ KVM networking - comprehensive networking extension for video, audio, IR, RS-232, and USB ■ Seamless switching and zero latency ■ Supported video modes - matrix switch, multi-view display, video wall, KVM ■ Intuitive Web-GUI for system configuration ■ NETGEAR certified. Recommended switches: M4300 and M4500 series

• Image Transmission Equipment

Features ■ IP transmission of 4K/60Hz 4:4:4 video signals over a 10-gigabit network ■ Transmitter (encoder) with standard Cat 6a cable connection, maximum distance of 100m ■ Supports HDMI 2.0 and DisplayPort 1.2 inputs ■ Preview function for input sources ■ OSD (On-Screen Display) ■ Extends video, audio, IR, RS-232, and USB across the network ■ Seamless switching and zero latency ■ Video mode support - matrix switch, multi-view display, video wall, KVM ■ System configuration via an intuitive web-based GUI through IPS-M (controller) ■ NETGEAR certified. Recommended switches: M4300 and M4500 series

• Image Transmission Equipment

Features ■ IP transmission of 4K/60Hz 4:4:4 video signals over a 10-gigabit network ■ Fiber optic connectivity covering distances of up to 10 km ■ Configurable as a transmitter and receiver ■ Optimized fanless system design ■ Extension of video, audio, IR, RS-232, USB, and HID ■ Seamless switching with zero latency ■ Matrix switch, multi-view display, video wall, and KVM ■ System configuration via web-based GUI through IPS-M (controller) ■ Rack mountable (optional) ■ NETGEAR certified. Recommended switches: M4300 and M4500 series

• Image Transmission Equipment

Features ■ 4K/60Hz 4:4:4 video signal transmitted over IP via a 10-gigabit network ■ Extendable up to 100m with standard Cat 6a cable connection ■ PoE compatible ■ Transceiver - can be configured as a transmitter and receiver in full-duplex transmission mode ■ Optimized fanless system design ■ General networking extension for video, audio, IR (remote control), RS-232, USB, and HID ■ Seamless switching and zero latency ■ Supported video modes - matrix switch, multi-view display, video wall, and KVM ■ System configuration via intuitive web-based GUI through IPS-M (controller) ■ Rack mountable (optional) ■ NETGEAR certified. Recommended switches: M4300 and M4500 series

• Image Transmission Equipment

Features ■ 4K/60Hz multi-window processor/video processor ■ 4x HDMI 2.0 inputs and 2x HDMI 2.0 outputs ■ All inputs and outputs support up to uncompressed 4K/60Hz 4:4:4 resolution (18Gbps bandwidth) ■ Seamless switching ■ Independent layout processing for each output ■ Four split layers (4K) for each output ■ Powerful video processing algorithms driven by FPGA ■ Six preset modes ■ Control via Web GUI, tablet app, IR (remote control), front panel buttons, API (Application Programming Interfaces)

• Image Processing Equipment

Features ■ Intel Pentium N4200 QuadCore CPU ■ 4GB RAM memory, 128GB industrial SSD ■ Supports Windows 10 & Linux (32Bit, 64Bit) ■ VESA 100 / Screwhead holes (20×14 cm) ■ Integrated W-LAN ■ Aluminum casing ■ Operating temperature: -10 to 60℃

• Sales Management

Features ■ Intel Core i5-7300U CPU ■ 8GB RAM, 128GB industrial SSD ■ Supports Windows 10 & Linux (32Bit, 64Bit) ■ VESA 100 / Screwhead holes (20×14 cm) ■ Integrated W-LAN ■ Aluminum casing ■ Operating temperature: -10 ~ 60℃

• Sales Management

Features ■15.6" TFT LCD ■Intel Pentium N4200 QuadCore CPU ■4 GB RAM memory, 128 GB industrial SSD ■Supports Windows 10 & Linux (32Bit, 64Bit) ■Anti-glare surface treatment (anti-reflective) ■10-point multi-touch capacitive touch panel ■Optical bonding compatible ■IP65 front with silicone seal

• Sales Management
• Process Control System
• Industrial PCs

Features ■ 13.3" TFT LCD ■ Intel Pentium N4200 QuadCore CPU ■ 4 GB RAM, 128 GB industrial SSD ■ Supports Windows 10 & Linux (32Bit, 64Bit) ■ Anti-glare surface treatment (anti-reflective) ■ 10-point multi-touch capacitive touch panel ■ Optical bonding compatible ■ IP65 front with silicone seal

• Sales Management
• Process Control System
• Industrial PCs

Features ■12.1" TFT LCD ■Intel Pentium N4200 QuadCore CPU ■4 GB RAM memory, 128 GB industrial SSD ■Supports Windows 10 & Linux (32Bit, 64Bit) ■Anti-glare surface treatment (anti-reflective) ■10-point multi-touch capacitive touch panel ■Optical bonding compatible ■IP65 front with silicone seal

• Sales Management
• Process Control System
• Industrial PCs

Features ■ 24" TFT LCD ■ Intel Pentium N4200 QuadCore CPU ■ 4 GB RAM memory, 128 GB industrial SSD ■ Supports Windows 10 & Linux (32Bit, 64Bit) ■ Anti-glare surface treatment (anti-reflective) ■ 10-point multi-touch capacitive touch panel ■ Optical bonding compatible ■ IP65 front with silicone seal

• Sales Management
• Process Control System
• Industrial PCs

Features ■19" TFT LCD ■Intel Pentium N4200 QuadCore CPU ■4 GB RAM memory, 128 GB industrial SSD ■Supports Windows 10 & Linux (32Bit, 64Bit) ■Anti-glare surface treatment (anti-reflective) ■10-point multi-touch capacitive touch panel ■Optical bonding compatible ■IP65 front with silicone seal

• Sales Management
• Process Control System
• Industrial PCs