サニー・トレーディング List of Products and Services

Generating approximately 0.8 ppm of ozone gas at about 500 cc/min.

The A12-17 type combustible gas detector can reliably measure combustible gases. An automatic testing function can be added as an option, allowing for a reduction in labor costs.

The Q46P/R type pH/ORP meter is a highly accurate, reliable, and versatile measuring instrument. It is used for the routine monitoring of pH values in various liquid processing systems, including water supply and drainage, wastewater, cooling water, pure water, cleaning water in food manufacturing processes, and cooling water in chemical plants, among many others.

The Q46C2 conductivity meter is a highly precise and reliable measuring instrument for measuring the high purity water required in pure water systems. It features a large, easy-to-read LED display, and the sub-display can show temperature and other information. Since it may be appropriate to display values in resistivity units, the Q46C2 conductivity meter allows for the measurement unit to be changed.

The ATI Q46C4 type 4-electrode conductivity meter is a water quality meter that meets the conductivity measurement needs of most liquids. It has a proven track record in drinking water, cooling water, chemical solutions, and other water treatment systems.

The Q46H/79S total chlorine meter is resistant to interference from contaminants and can measure total chlorine concentration with high precision. It features a unique structure that prevents contact between the measurement liquid and the sensor, and it has a proven track record in special applications worldwide, such as drinking water, wastewater, and cooling towers. 【Features】 - High precision - Capable of handling a wide range of applications - Measures by gasifying the sample liquid

NewIsomon-2 can measure hydrogen peroxide gas over a wide range with a single unit. For example, it can measure high concentration levels (0-2000ppm) during the sterilization process of hydrogen peroxide gas in pharmaceutical and food factories, as well as low concentration levels (0-100ppm) after aeration, all with one device. 【Features】 - It has a built-in suction pump, allowing for quick concentration measurements. - It comes standard with a 4-20mA output and alarm output necessary for control. - It can measure concentrations within the range of 0-2000ppm with high precision. *Demo units are available. Please feel free to contact us.

By measuring the turbidity during the stirring and backwashing of the accumulated material at the bottom of the tank, optimal filter cleaning can be achieved.

The Q46D dissolved oxygen meter is an ideal measurement control device that can maintain reliability for monitoring measurements throughout the entire year by utilizing an automatic cleaning function. It has a proven track record in biological processes at wastewater treatment plants.

The "Q46H/79PR type" is a total chlorine meter that allows for inline continuous measurement without reagents. It is suitable for managing effective chlorine (free chlorine and combined chlorine) after chloramine treatment and disinfection. Additionally, it can be used in seawater or low conductivity environments without the need for chemical reagent additions. Furthermore, options for pH measurement and additional outputs are available. 【Features】 ■ Inline continuous measurement without reagents ■ No need for chemical reagent additions ■ Usable in seawater and low conductivity environments ■ Options for pH measurement and additional outputs available *For more details, please refer to the PDF document or feel free to contact us.

The "F12 model" is a hydrogen peroxide concentration meter for safety management and concentration management. It can measure high concentration ranges (0-2000ppm) used in sterilization processes and low concentration ranges (0-100ppm) to check residual concentrations after aeration. Additionally, it has a strong track record with major pharmaceutical companies, allowing for measurements that are close to theoretical values due to calibration with actual gas. 【Features】 ■ Strong track record with major pharmaceutical companies ■ Capable of measuring values close to theoretical values due to calibration with actual gas *For more details, please refer to the PDF document or feel free to contact us.

The "F12 model" is a peracetic acid gas concentration meter. It is a fixed installation type, and with various measurement ranges and options available, it can accommodate a wide range of specifications. In addition to this product, we also offer a rich selection of sensors for hydrogen peroxide, peracetic acid, chlorine dioxide, ozone, EOG gas, and more. 【Sensor Selection Table】 ■ Measured Gas: Peracetic Acid / Peracetic Acid / Acetic Acid ■ Sensor Model: 00-1704 / 00-1705 / 00-1045 ■ Minimum Range: 0-1ppm / 0-10ppm / 0-100ppm ■ Maximum Range: 0-5ppm / 0-100ppm / 0-500ppm ■ Standard: 2ppm / 20ppm / 100ppm *For more details, please refer to the PDF document or feel free to contact us.

The "F12 model" is an ozone gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "EOG gas concentration meters," "chlorine dioxide gas concentration meters," and "formaldehyde gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Ozone ■ Sensor Model: 00-1163 / 00-1008 / 00-1009 / 00-1358 ■ Minimum Range: 0–500 ppb / 0–1 ppm / 0–5 ppm / 0–200 ppm ■ Maximum Range: 0–2000 ppb / 0–5 ppm / 0–200 ppm / 0–1000 ppm ■ Standard: 0–1000 ppb / 2 ppm / 20 ppm / 1000 ppm ■ Auto Test Generator: 00-1538 * For more details, please refer to the PDF document or feel free to contact us.

The "F12 type" is a chlorine dioxide gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "EOG gas concentration meters," "ozone gas concentration meters," and "formaldehyde gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Chlorine Dioxide ■ Sensor Model: 00-1004 / 00-1005 / 00-1359 / 00-1425 ■ Minimum Range: 0-1ppm / 0-5ppm / 0-200ppm / 0-1ppm ■ Maximum Range: 0-5ppm / 0-200ppm / 0-1000ppm / 0-5ppm ■ Standard: 2ppm / 20ppm / 200ppm / 5ppm ■ Auto Test Generator: 00-1538 / 00-1538 / - / 00-1538 *For more details, please refer to the PDF document or feel free to contact us.

The "F12 model" is a formaldehyde gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "EOG gas concentration meters," "ozone gas concentration meters," and "chlorine dioxide gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Formaldehyde ■ Sensor Model: 00-1040 / 00-1349 ■ Minimum Range: 0-20 ppm / 0-500 ppm ■ Maximum Range: 0-200 ppm / 0-2000 ppm ■ Standard: 20 ppm / 1000 ppm ■ Auto Test Generator: 00-1539 *For more details, please refer to the PDF document or feel free to contact us.

The "F12 model" is an EOG gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "ozone gas concentration meters," "chlorine dioxide gas concentration meters," and "formaldehyde gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Ethylene Oxide ■ Sensor Model: 00-1039 ■ Minimum Range: 0–20 ppm ■ Maximum Range: 0–200 ppm ■ Standard: 20 ppm ■ Auto Test Generator: 00-1539 *For more details, please refer to the PDF document or feel free to contact us.

The "Q46S/66 model" is a measuring device that can measure residual sulfite ions and reduce the consumption of chemicals that are being used excessively. This product allows for the measurement of sample water without contact between the sensor and the fluid, enabling the removal of wastewater for measurement. A small amount of residual sulfite ions during dechlorination treatment is effective for complete dechlorination, and measuring the concentration of residues can control the chemical dosing, significantly reducing chemical costs. 【Features】 ■ Selectively converts sulfite ions to sulfur dioxide (sulfurous gas) for measurement ■ Sample water and sensor do not come into contact with the fluid, allowing for the removal of wastewater for measurement ■ Power supply can be selected as 115 or 230 VAC, 60/60 Hz ■ Maintains stable costs for chemicals ■ Controls chemical dosing through the measurement of residue concentration, significantly reducing chemical costs ■ Allows for savings on chemicals *For more details, please refer to the PDF document or feel free to contact us.

The "Q46H/64 type" dissolved ozone meter can continuously measure dissolved ozone in water without the need for reagents. It employs a diaphragm-type polarographic sensor, which means the electrode does not come into direct contact with the measuring liquid. As a result, it is less affected by impurities and can be used for measurements in wastewater. The electrode is resistant to contamination, ensuring a long lifespan and cost-effective usage. Additionally, it can handle a wide range of concentrations, from low levels below 100 ppb to high levels above 100 ppm. 【Features】 ■ Strong resistance to contamination achieved through the diaphragm-type polarographic sensor that protects the electrode ■ No adjustment needed after sensor replacement ■ Large LCD display ■ Optional wide-range measurement from 0 to 200 PPB to 0 to 200 PPM ■ Standard PID control function can be assigned to analog output *For more details, please refer to the PDF document or feel free to contact us.

The "Q4Q46/88 model" is an SS meter that can measure and monitor particles in various water and wastewater in real-time. Measurements can be taken by inserting an immersion-type sensor into the process tank, or for a wide range of measurements, a sensor using optical backscatter technology is employed. The measurement results are displayed on the Q46 electronic unit located near the sensor. 【Specifications】 ■ Measurement target: SS concentration ■ Measurement range: 0-100.0 / 0-1000 mg/l, 0-10.00 g/l ■ Sensor type: Flow-through type ■ Equipped with automatic air cleaning function *For more details, please refer to the PDF document or feel free to contact us.

The turbidity meter "Q46 / 76 model" offers precision and reliability for low-range turbidity measurements and is widely used around the world. It is designed to be suitable for drinking water systems and industrial water treatment. 【Features】 ■ High precision low-range turbidity measurement ■ Proven track record worldwide ■ Optional features available *For more details, please refer to the PDF document or feel free to contact us.

The 2-wire transmitter (wet gas detector) can measure the concentration of wet gases. We have a proven track record of confirming removal after scrubber treatment. Measurable gases: Chlorine, chlorine dioxide, bromine, ozone, hydrogen fluoride, hydrogen chloride, hydrogen 【Features】 ■ Cost-effective and easy to handle ■ Capable of detecting a variety of gases *For more details, please refer to the PDF document or feel free to contact us.

Sunny Trading leverages over 50 years of experience to import high-performance and reliable products from around the world, providing consistent sales including technical after-sales service. Additionally, we design and manufacture various devices equipped with elements tailored to our customers' specifications, achieving numerous accomplishments. In this catalog, we introduce our company profile as well as the entire lineup of products we handle. 【Business Activities】 ■ Design and manufacturing of various gas pressurization, pumping, filling, and pressure-tightness testing equipment, hydraulic, oil temperature, and flow measurement devices, automatic discharge devices, oxygen generation devices, filling equipment, etc. *For more details, please refer to the PDF materials or feel free to contact us.

The "Q46H/65" is a chlorine dioxide meter suitable for disinfection and sterilization systems, as it can continuously produce chlorine dioxide water. Being a diaphragm type, it can operate in environments with low conductivity and many impurities. Additionally, it has multiple outputs, including 4-20mA analog output, PID control, and digital communication, making it applicable for measuring any chlorine dioxide water. 【Features】 ■ Displays chlorine dioxide and pH on the indicator ■ Remote monitoring and recording capabilities ■ Ideal for disinfection and sterilization systems ■ Diaphragm type, suitable for environments with low conductivity and many impurities ■ Applicable for measuring any chlorine dioxide water *For more details, please refer to the PDF document or feel free to contact us.

It supports the detection of over 30 types of gases, including hydrogen fluoride, ozone, and chlorine. By simply attaching the target gas sensor module to the gas detector, you can detect low-concentration gas leaks and measure high-concentration gas levels. 【Features】 ■ Easy to replace due to the use of smart sensors, eliminating the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - Is type only ■ Large and easy-to-read LCD display *For more details, please refer to the PDF document or feel free to contact us.

The "Q46F model" can be used for continuous measurement of fluoride ions in wastewater, effluent, and drinking water. It employs a fluoride ion selective electrode (ISE) and can measure fluoride ions from 0.1 PPM to a maximum of 1000 PPM. With its simple structure, it allows for low-cost continuous measurement of fluoride ions. *For more details, please refer to the PDF document or feel free to contact us.

The Q46/84 type hydrogen peroxide meter is designed to continuously measure H2O2 in aqueous solutions. Hydrogen peroxide is used for disinfection, odor control, oxygen treatment, and various controls such as cyanide oxidation, and measuring it allows for efficient control. *We also have demo units available, so please feel free to contact us.*

The Q46/85 peracetic acid meter features a diaphragm-type sensor, making it resistant to interfering substances and capable of handling water quality with low conductivity. It is used for cleaning pipes in the food industry, disinfecting peracetic acid (PAA) production equipment, washing food, and disinfecting cooling water systems. It is a reliable measuring instrument for online real-time measurement of peracetic acid (PAA). Additionally, it is not affected by changes in the concentration of hydrogen peroxide present in the solution.

The A14/A11 series is a gas detector that can add various functions with just one unit. Since the functions can be customized, it is adopted by major pharmaceutical factories, semiconductor manufacturing plants, and research laboratories in Japan. It can be used for both simple and complex applications, making it suitable for indoor gas detection, safety management systems, and more! 【Features】 ■ Capable of measuring up to 12 locations ■ Sensor cables can be extended up to 300m ■ Usable for both simple and complex applications

It is a device for removing moisture from gas that contains moisture. It can also be used with ATI gas detectors and gas detectors from other manufacturers.

EchoSmart is a multi-layer sludge interface level meter capable of measuring any layers and suspended solids within a liquid layer. It utilizes the latest wireless technology, reducing costs for installation cables and labor. It is used in clarifier equipment by wastewater treatment manufacturers worldwide and is employed in water/wastewater treatment facilities, as well as in the paper/pulp and food industries for clarifiers and thickening tanks. **Features** - Measurement of liquid interfaces and suspended solids - Wiper for automatic cleaning - Turbidity measurement function to enhance cleaning efficiency - Wired/wireless options - Multiple sensors can be used with a single monitor - Graphical display for easy situation assessment

We handle ATI's "Dissolved Ozone Meter" and "D16 Portable Gas Detector," which allow for easy and reliable measurement of ozone concentration. They have a wide measurement range, excellent operability, and visibility of displays, making them widely adopted across various industries. 【Features】 "Dissolved Ozone Meter Q46H/64 Model" - Compatible with ProfibusDP, Modbus, and Ethernet - Supports two separate 4-20mA analog outputs - pH measurement monitoring is also possible - Large LCD display with backlight - Standard equipped with three SPDT relays "D16 Portable Gas Detector" - Usable with one hand - Large LCD allows for confirmation of ozone concentration and alarm messages even in dark places - Powered by D-cell alkaline batteries and rechargeable batteries - Equipped with data logger functionality, manageable via computer - Offers more than 30 sensor modules, not just for ozone *We also handle spare parts for the old model (C16). *For more details, please refer to the materials. Feel free to contact us with any inquiries.

The "ATI Company Comprehensive Catalog" is a catalog that delivers a wide range of high-performance and reliable products from ATI, including "water quality meters" and "gas detectors," backed by comprehensive technology and services. The "Water Quality Meter Series" has a proven track record in public water treatment facilities for water purification, sludge treatment, and wastewater treatment. Additionally, efforts are being made to reduce costs and shorten delivery times through uniform sizing and design. The "Gas Detector Series" can measure over 30 types of toxic gases and oxygen, and is used in various locations around the world, including plants and laboratories. With a lineup tailored to various applications, it contributes to maintaining a safe and secure environment. [Contents] ■ Water Quality Meter Series ■ Gas Detector Series *For more details, please refer to the PDF materials or feel free to contact us.

The Q46H/62-63 residual chlorine meter adopts a polarographic membrane sensor, allowing for the direct measurement of free chlorine, active chlorine, and combined chlorine (monochloramine) without the need for reagents. Due to its diaphragm-type sensor, it is less affected by changes in the measurement liquid or impurities, enabling the measurement of residual chlorine in electrolyzed hypochlorous water, seawater, wastewater, hot springs, and pure water. Additionally, since the electrode does not come into direct contact with the measurement liquid, it is less prone to contamination and has a long lifespan. By adding a pH sensor option, simultaneous measurement of chlorine and pH is possible. The pH correction function allows for measurements even when the pH value is high or fluctuating. It has a wide measurement range, capable of measuring low concentrations below 1 mg/L and high concentrations above 100 mg/L with a single unit. 【Features】 ■ No reagents required ■ Easy installation ■ Wide and flexible measurement range ■ Cost-effective *Demo units are available, so please feel free to inquire. *For more details, please refer to the PDF document or feel free to contact us.

It is a non-contact oil film detector. It can detect oil leaks with high precision and ease, allowing for immediate action. As an oil leak monitor, it is ideal for oil spill monitoring. 【Features】 - It detects fluorescence emitted from oil using UV-LED as the light source without contact. - Unlike laser-based methods, it is resistant to surface waves and can be easily installed. - The maximum detection distance is 10 meters. - Since it uses fluorescence detection, it can be installed at various angles. - It has no moving parts and is maintenance-free. - The standard type is very lightweight and compact at 1.7 kg. - With an IP68 casing, it can be installed in various locations. *For more details, please refer to the PDF document or feel free to contact us.

The "ATI Gas Detector Series" can measure over 30 types of toxic gases and oxygen, and is used in various locations around the world, including plants and laboratories. With a lineup tailored for various applications, it contributes to maintaining a safe and secure environment. [Contents] ■ Gas Detector Series - Portable Gas Detectors - Fixed General-Purpose Gas Detectors (Model F12) - 2-Wire Transmitters (Model B12) etc. *For more details, please refer to the PDF document or feel free to contact us.

The ATI ChlorLog provides compact measurement and logging of residual chlorine concentration. It is ideal for data collection of residual chlorine concentration in remote locations such as water treatment plants. 【Features】 - Continuous measurement of residual chlorine concentration - Choice of free chlorine, combined chlorine, or total chlorine sensors - Membrane-type polarographic sensor that does not require reagents *For more details, please refer to the PDF document or feel free to contact us.

This product is a gas detector that can easily measure gas concentrations in the air with simple operations. It can be used with one hand, and with the built-in suction pump and sampling wand, it is possible to pinpoint gas leak locations. Additionally, the sensor module can be easily replaced, allowing one unit to measure multiple gases. 【Features】 ■ Can pinpoint gas leak locations ■ Capable of measuring multiple gases with one unit ■ Sensor module can be easily replaced ■ Large LCD display with backlight for clear visibility in dark places ■ Equipped with an alarm that sounds and lights up when the measured value reaches the set value *For more details, please refer to the PDF document or feel free to contact us.

• Measurement gas: Refer to the below • Power supply: DC24V • Output: 2-wire, DC4-20mA • Alarm: None • Sensor: Integrated type, separated type, duct-mounted type • Automatic test function: None • Simple gas detector • Option to select presence or absence of display

The ATI Q46UV monitor continuously monitors the water quality of raw water, treated water, recycled water, and wastewater. Due to its relatively long absorption path of 20mm, it demonstrates excellent sensitivity to even slight changes in dissolved organic carbon (DOC). The UV-254 sensor utilizes a pulsed UV LED light source and a scratch-resistant sapphire optical window, ensuring trouble-free monitoring over many years. Achieving UV absorption rate and turbidity with a single sensor • Utilizes long-lasting pulsed UV LEDs • 20mm measurement path for high sensitivity • Turbidity measurement using 860nm infrared (ISO-7027) • Infrared sensor measures both 90° scattering and absorption

The ATI Q46F-D fluoride monitor continuously measures the fluoride concentration in drinking water or wastewater. This system employs a fluoride-sensitive ion-selective electrode (ISE) and allows for reliable measurements from below 0.1 PPM to up to 1000 PPM. It is designed for use in applications where the pH and conductivity of the water are relatively stable.

- It can be used in a wide range with pipe diameters from 1/4" to 2" and flow rates from 0.95 to 947 L/min. - Due to its robust SUS316 construction, it can be used for a long time even in harsh environments. - Calibration is performed in accordance with NIST traceability. - It supports NPT and flange mounting. - Accessories such as K factor scalers, F/I and F/V converters, and repair kits are also available. - There are two types: NPT and flange mounting.

- It can be used with pipe diameters ranging from 3/4" to 2-1/2" (for sanitary connections) and has a wide flow range of 2.5 to 1500 L/min. - Its robust SUS316 construction allows for long-lasting use even in harsh environments. - Calibration is performed in accordance with NIST traceability. - It complies with 3-A standards and can accommodate COP and SOP applications. - It meets FDA standards, and internal parts can be easily disassembled for cleaning and inspection.

- It can be used in a wide range of pipe diameters from 3/8" to 10", with a flow rate range of 2.3 to 19,000 L/min. - Its robust SUS316 construction allows for long-lasting use even in harsh environments. - Calibration is performed in accordance with NIST traceability. - It features a space-saving installation method that fits between flanges. - It demonstrates high performance even in corrosive environments.

- It has a 2-inch pipe diameter and is a wafer connection type. It can be easily connected between flanges. - The flow range is 12 to 583 m³/h. - Due to its robust SUS316 structure, it can be used for a long life even in harsh environments. - Calibration is performed in accordance with NIST traceability.

The simple operation and easy-to-understand display of the DC1500 residual chlorine tester allow anyone to easily measure residual chlorine. It is portable and can perform 100 measurements using tablet reagents. <Features> - EPA compliant: Adopts appropriate wavelength and DPD testing method that meets EPA design specifications for chlorine monitoring programs under NPDWR and NPDES (EPA 330.5 and Standard Method 4500) - Covers chlorine range of 0-4 ppm (detection limit of 0.03 ppm) - Easy-to-read characters and backlit display - Equipped with a rechargeable battery, can be charged via USB cable - IP67 waterproof design: Achieves trouble-free performance with a design considering excessive moisture resistance - Obtained European CE mark - Large LCD display, additionally equipped with a backlit display