サニー・トレーディング List of Products and Services

The "Pulsation Absorption Damper" is a damper designed to absorb the pulsations of fluid generated by diaphragm pumps and convert them into a uniform discharge fluid. Inside the damper, a diaphragm is incorporated, and the air pressure within the diaphragm fluctuates according to the operation of the pump. This air is compressed when the pump is pressurized and expands when the pressure is reduced, absorbing the pump's pulsations. As a result, the discharge waveform of the fluid is kept consistent. Dampers with capacities suitable for pump performance are manufactured in various series. 【Features】 - Simple installation - Essential pulsation absorption - Stable pressure responsiveness - Prevention of piping vibrations - Reduction of pump load - Protection of downstream instruments - No interference with the process line - Manufactured in various dimensions and materials For more details, please contact us or download the catalog.

The "integrated pump-type plastic damper" is made of PE, PTFE, conductive PE, and conductive PTFE materials. When using conductive polymer (code Z.R) as the material, the pump itself acts as a ground, eliminating the need for grounding even when used with flammable fluids or in explosion-proof areas. 【Features】 ○ Space-saving design by installing the damper on top of the pump. ○ Reduction of pressure fluctuations and prevention of water hammer. ○ Protection of instruments and piping installed downstream. For more details, please contact us or download the catalog.

The "metal damper" is a damper that is mounted integrally with the pump. In addition to aluminum material and AISI316 (industrial series), there is also a "sanitary specification AISI316L - polished product." When handling flammable fluids in explosive areas, a damper made of PE conductive (code R) material must be used. For safety, a separate grounding must be taken. 【Features】 ○ The pump and damper can be shipped separately. ○ If the damper is not connected to the pump, it is necessary to ground the damper itself. ○ Air pressure: 0.8MPa ○ PE: 70℃ PTFE: 120℃ Metal: 120℃ ○ Reduction of pressure fluctuations ○ Water hammer countermeasures ○ Protection of piping and instruments For more details, please contact us or download the catalog.

The DELLMECO diaphragm damage detection system can easily and effectively prevent fluid from being discharged externally. The diaphragm has a metal core and is designed for long life, but there are wear parts. If the diaphragm is damaged, fluid will leak into the center housing and be discharged externally through the muffler, but the diaphragm damage system can prevent this. 【Features】 ○ Compact diaphragm sensor installed inside the muffler ○ When leaking fluid comes into contact with the sensor, it immediately alerts that the diaphragm has been damaged ○ Two types of diaphragm sensors For more details, please contact us or download the catalog.

The "Stroke Counter" is simply installed by placing the stroke counter sensor on the pump. The number of strokes of the diaphragm can be measured by a non-contact sensor, unaffected by external influences or the operation of the pump. 【Features】 ○ The signal from the sensor can be sent as output data to a detector or to a stroke counter system (available upon request). ○ When the count reaches a specified value, the counter sends an output signal externally, allowing the pump to be stopped through a solenoid valve. ○ Five different models are available. For more details, please contact us or download the catalog.

The "Pump with Heater/Cooler Jacket" can be used for industrial pumps and sanitary pumps. It is a pump equipped with a heater and cooler to maintain high/low temperatures of the fluid being discharged. 【Features of the Pump with Heater/Cooler Jacket】 ○ By heating the fluid, it is possible to reduce viscosity and increase discharge volume. ○ By flowing low-temperature fluids, it is possible to maintain the temperature of products. ○ The heating/cooling fluid continuously circulates within the jacket. ○ The jacket covers the entire area of the pump's wetted parts. For more details, please contact us or download the catalog.

The "Backflushing System (Ball Lift System)" pump can empty its interior, including the discharge line, without removing or disassembling the pump. A bypass system is provided in the housing, and operations can be performed using a manual valve (codes BF1, BF2, BF3) or an air-operated valve (codes BF4, BF5). 【Features】 〇 Discharges residual liquid from the pump. 〇 Manual type: BF1, BF2, BF3 (EPDM, PTFE, FPM) 〇 Air type: BF4, BF5 (EPDM, PTFE) 〇 By attaching a 4-2 direction switching valve (sold separately), it can automatically operate in case of pump interruption. Metal ball lift system (BF2 option) 〇 By turning the metal block pins located on both sides of the pump housing, the manual valve can be opened. 〇 The suction side can be completely drained. For more details, please contact us or download the catalog.

The "Barrier Chamber System" is a PE barrier chamber filled with a non-conductive liquid between two diaphragms to meet advanced safety standards. A sensor for measuring conductivity is attached to monitor the liquid, and if a diaphragm fails and a change occurs in the liquid, the sensor detects it and sends an anomaly signal to the control device. 【Three Types of Barrier Systems】 ○ BC1: Standard Barrier System (with sensor) ○ BC2: Barrier System (with sensor and control device) ○ BC3: Barrier System (with sensor and control device) for explosion-proof use - ATEX For more details, please contact us or download the catalog.

The "High-Pressure Diaphragm Pump (Air-Driven)" is a high-pressure pump designed for HP-type filter press liquid transfer, made very compactly, and can be directly mounted on the filter press unit. It is used for transferring slurries in food and beverage applications, as well as for water and wastewater transport. The pump is manufactured based on standard DELLMECO polyethylene (PE) pumps. There is also an option for a stroke center/counter to monitor the filling level. 【Features】 ○ Plastic pump (PE, PTFE) ○ Design allows for linear slurry pumping by the user ○ Pressure control regulator is pre-installed on the unit ○ Booster to double the discharge pressure is mounted externally ○ Easy maintenance due to fewer parts ○ Compact ○ Can operate dry ○ Self-priming → For example, it can increase pressure from 7 bar to a maximum of 14 bar to pump fluids. For more details, please contact us or download the catalog.

The "High Discharge Pressure Diaphragm Pump (Air Driven)" is a pump with self-regulating capabilities, eliminating the need for auxiliary equipment in fluid control. It has an amplifier that doubles the discharge pressure of the liquid. For example, discharge pressure: 0.7MPa ⇒ discharge pressure: 1.4MPa. There are also stroke sensors and stroke counters available for monitoring the filling level of filter presses. 【Features】 ○ Metal pump (aluminum, iron, stainless steel) ○ Can be directly connected and installed to filter presses ○ Pressure regulator is directly attached to the air supply section for driving ○ The pump is self-priming ○ Can operate dry ○ Compatible with slurry liquids For more details, please contact us or download the catalog.

DELLMECO's MV option type plastic pump detects differential pressure displacement of the pump stroke through electrical signals and is a configuration that incorporates an air distributor into a standard pump. The air valve is a 2-position, 4-direction solenoid valve. 【Features】 〇 Ideal for chemical transfer as it can accurately transport flow ○ When the solenoid is not energized → One side of the air chamber in the pump is pressurized with driving air, while the opposite chamber is discharged ○ When the solenoid is energized → The pressurized side is discharged, and the discharged side is pressurized ○ The pump operates by turning the power on and off For more details, please contact us or download the catalog.

The "DMCX Series" is a diaphragm pump designed for low to medium flow ranges. The structural components are processed using the latest CNC machines and turning centers. It operates using compressed air, eliminating the need for electric motors or electrical connections. The pump's discharge capacity ranges from 10 to 130 LPM, and four models are available. The air control system is non-lubricated and does not contaminate the area around the pump. 【Features】 - The diaphragm is made of EPDM, NBR, or PTFE/EPDM composite material. - The check valve is available in ball or cylinder form. - It is self-priming and can operate dry. - Easy to handle and maintain. - Can be manufactured with conductive PE (ATEX compliant). For more details, please contact us or download the catalog.

The DMF series diaphragm pump is a pump equipped with a pulsation-absorbing damper and features two standard separate chambers. Fluid transfer and discharge occur from each chamber, and the fluid flows smoothly due to the pulsation-absorbing damper. The trouble-free pulsation-absorbing damper effectively absorbs pump pulsations even with a minimum back pressure of just 1 bar. The effect increases as the back pressure rises. 【Features】 ○ The second pump chamber can also be used as an extractor → It can suction ink or adhesives from the machine and return them to the supply container. ○ The second chamber can be used as a circulation pump → It can be used for returning ink to the supply container, etc. → This return flow enhances the blending effect of the ink and completely prevents particle sedimentation. For more details, please contact us or download the catalog.

STANDARD PUMP's "Drum Unloader (AODD)" is designed to transfer high-viscosity fluids and non-flowing fluids such as pharmaceutical raw materials, lotions, and food ingredients from drums to filling machines and mixers. It is used for the transfer of various fluids, including viscous food ingredients and personal care cosmetics. It reduces the processes of manual transfer, heating, and product dilution, contributing to production efficiency. This inflatable seal can transfer 99% of the raw materials from the drum. *For more details, please contact us or download the PDF materials.

The STANDARD PUMP company's "Drum Unloader (Piston)" is designed to transfer high-viscosity fluids and non-flowing fluids such as pharmaceutical raw materials, lotions, and food ingredients from drums to filling machines and mixers. It is used for the transfer of various fluids, including viscous food ingredients and personal care cosmetics. It reduces the processes of manual transfer, heating, and product dilution, contributing to production efficiency. This inflatable seal can transfer 99% of the raw materials inside the drum. *For more details, please contact us or download the PDF materials.