サニー・トレーディング List of Products and Services

Badger Meter offers a variety of volumetric flow meters. By selecting optimal materials such as resin, aluminum, and stainless steel, as well as different types like disc and gear types, they can be used for a wide range of applications. They have a broad measurement flow range and are particularly adept at measuring in high viscosity ranges, with features such as not requiring a straight pipe section. Main measured liquids: acids, alkalis, oils, hydraulic fluids, industrial water, pure water, diesel, kerosene, liquid food (such as tomato paste), paints, coolants.

USB-Compatible Portable Hydraulic Tester The USB hydraulic system analyzer is a device that can be used for diagnosing and analyzing industrial and vehicle hydraulic systems, either stationary or portable. This device detects flow, pressure, and temperature through a data acquisition module. The module records the operating parameters of the system and can transfer them to a computer via a USB port. PFM6 Portable Hydraulic Tester This compact and lightweight portable tester can measure the flow, pressure, and temperature of all types of vehicles and stationary hydraulic systems, as well as components, with laboratory-level accuracy. It is designed and manufactured for quick diagnostics and troubleshooting of equipment. FSB/FSC/FSD Series Turbine Flow Sensors These sensors primarily measure the flow of hydraulic fluids. The body material can be selected from aluminum with an anodized surface or stress-relieved steel, and they can be used for pressures up to 41.4 MPa.

• Large diameter, bidirectional flow measurement • Maximum of 8 data logging items • Modbus RTU or BACnet MS/TP over EIA-485; BACnet/IP digital communication compatible • Configuration and troubleshooting via USB with SoloCUE software • Reynolds number, ultrasonic speed, temperature compensation • Large and easy-to-read graphic display • Robust aluminum enclosure for long life even in harsh environments

• Clamp-on non-contact flow meter • Bidirectional flow measurement • Measurement of instantaneous flow, cumulative flow, and flow velocity • Settings via software (SoloCUEFlow Device Manager) or keypad • Compact housing with a large, easy-to-read graphic display • Modbus RTU or BACnet MS/TP and BEACON/AquaCUE connectivity • Can be installed without cutting the piping • Cost reduction for flanges and fittings • No movable parts requiring maintenance • No pressure loss Badger Meter

It supports both transit and Doppler types and can be used independently. It is equipped with a rich array of sensors to accommodate various piping and also has a built-in 1 kg data logger. 《Specifications》 • Power Supply: Rechargeable lithium-ion battery • Output: Analog output: 4–20mA, Digital output: Open collector for integration, etc. • Display: Full-color touch panel • Accuracy: Transit type: ±1.0% F.S (for flow rate above 0.3 m/sec), Doppler type: ±2.0% F.S (for flow rate above 0.3 m/sec) • Indicator Standard: IP64 • Indicator Temperature Resistance: 80℃, Battery charging: -20 to 45℃ • Maximum Measured Flow Rate: Transit type 12 m/sec, Doppler type 12 m/sec • Repeatability: ±0.1% (reading value) • Detection Sensitivity: 0.0003 m/sec • Minimum Flow Rate for Accuracy: 0.3 m/sec • Operating Temperature: Transit type (DTTSU model: -40 to 90℃, DTTN model: -40 to 85℃), Doppler type -40 to 100℃ • Compatible Piping: SGP, SUS, PVC, PVDF, sanitary pipes, copper pipes • Required Straight Pipe Length: Upstream: more than 10 times the inner diameter, Downstream: more than 5 times the inner diameter

The VISION series flow meter is a compact flow sensor for liquids. A small turbine inside the flow meter rotates and outputs pulses proportional to the flow rate. It is compact, lightweight, low-cost, and requires no maintenance. It has a wide temperature range and can handle pressures up to 2.5 MPa, making it capable of measuring various liquids. Since it is made of transparent resin, the flow of the liquid inside and the operation of the turbine can be observed. Main measurement liquids: water, hot water, drinking water, pure water, light oil, detergents, etc. Main applications: cooling water, cooking equipment, coffee machines, laser cooling water, semiconductor devices, automotive-related equipment, agricultural equipment, dialysis-related devices, water treatment equipment, common rail, hypochlorous acid water generation devices, etc.

- It can accommodate various types of liquids. - It is a flow meter that can measure from the outside of the pipe. - It can measure from a small diameter of 6 mm to large diameters. - It can measure low flow rates with high performance and stability. - It has a built-in linearizer for enhanced performance. Measuring fluids: Liquids with air bubbles, oil, wastewater, slurry, industrial water, seawater Measurement liquid conditions: Liquids containing reflective particles (bubbles) of 35 microns or more at concentrations of 100 ppm or more.

- It has a measurement accuracy of ±0.25 to 1% (of the reading), and since the wetted parts are made of stainless steel, it is resistant to most chemical substances. - The flow meter for liquids can measure a wide range of pipe diameters from 1/4” to 10”. - It can measure water, water-soluble liquids, chemicals, and refined fuels over a wide measurement range. - The gas flow meter features a 2” wafer connection.

- It can be used in a wide range with pipe diameters from 1/2" to 10" and flow rates from 2.3 to 18,927 L/min. - Due to its robust SUS316 construction, it can be used for a long life even in harsh environments. - Calibration is performed in accordance with NIST traceability. - It supports various fittings such as NPT, BSP, and flanges. - Accessories such as K factor scalers, F/I converters, F/V converters, and repair kits are also available.

It is specially designed for servicing automobiles, trucks, buses, construction machinery, and more. The perfect balance, lightweight, robustness, and comfortable grip make it ideal for use with overhead hose reels. It accommodates a variety of petroleum products, including automatic transmission fluid, motor oil (SAE 5 to 50), gear oil (SAE 80 to 240), and antifreeze (ethylene glycol). When the piston vibrates, the hub at its center rotates the output shaft through the gear train. The pointer knob attached to the output shaft rotates around a graduated dial, indicating the discharge amount. In the standard model PG, the knob is reset counterclockwise to zero after delivery.

It is specially designed for servicing automobiles, trucks, buses, construction machinery, and more. The perfect balance, lightweight, robustness, and comfortable grip make it ideal for use with overhead hose reels. It accommodates a variety of petroleum products, including automatic transmission fluid, SAE 5-50 motor oil, SAE 80-240 gear oil, and antifreeze (ethylene glycol). When the piston vibrates, the hub at its center rotates the output shaft through the gear train. The pointer knob attached to the output shaft rotates around a graduated dial to indicate the discharge amount. In the preset batch model PGB, after turning the knob counterclockwise to the desired value, the trigger is pressed and locked in the ON position. The pointer knob rotates clockwise towards zero, the trigger latch is released, and the flow automatically stops.

The digital meter is specially designed to dispense motor oil (SAE5–50), gear oil (SAE80–240), automatic transmission fluid, and antifreeze (ethylene glycol). Unlike mechanical meters, it can be electronically recalibrated on-site as needed. The six-digit LCD display accurately shows the dispensed amount to two decimal places. Powered by a lithium battery, it can be used for 3 to 5 years depending on usage conditions. • Large six-digit LCD display with two decimal place accuracy • Accumulated display in pints, quarts, US gallons, and liters • Measurement units can be selected via the display operation • Resettable and non-resettable accumulators • Accumulated data is stored in memory

It is specially designed for measuring and dispensing fluids necessary for the service of automobiles, trucks, buses, construction machinery, and more. This meter is lightweight and durable, featuring a comfortable grip. It is designed to dispense motor oil (SAE 5...50), gear oil (SAE 80...240), automatic transmission fluid, antifreeze (ethylene glycol), and hydraulic fluids. - Accumulated display in liters and US gallons - Dispensing volume measurement in liters, quarts, pints, and US gallons - Maximum accumulated number: 99,999 US gallons or liters - Maximum dispensing volume: 99,999 units - Maximum preset amount: 999 units - Calibration coefficients for different fluids - Changeable measurement units - Programmable six presets - Minimum battery life of 20,000 cycles - Battery level display - Automatically shuts off at the set amount - Emergency shut-off feature

- It has a 2-inch pipe diameter and is a wafer connection type. It can be easily connected between flanges. - The flow range is 12 to 583 m³/h. - Due to its robust SUS316 structure, it can be used for a long life even in harsh environments. - Calibration is performed in accordance with NIST traceability.

- It can be used in a wide range of pipe diameters from 3/8" to 10", with a flow rate range of 2.3 to 19,000 L/min. - Its robust SUS316 construction allows for long-lasting use even in harsh environments. - Calibration is performed in accordance with NIST traceability. - It features a space-saving installation method that fits between flanges. - It demonstrates high performance even in corrosive environments.

- It can be used with pipe diameters ranging from 3/4" to 2-1/2" (for sanitary connections) and has a wide flow range of 2.5 to 1500 L/min. - Its robust SUS316 construction allows for long-lasting use even in harsh environments. - Calibration is performed in accordance with NIST traceability. - It complies with 3-A standards and can accommodate COP and SOP applications. - It meets FDA standards, and internal parts can be easily disassembled for cleaning and inspection.

- The spiral dual rotor achieves high absolute accuracy and a wide range of capability. - The spiral rotor reduces pressure loss and has excellent response speed. - The interior is securely fixed with rods and nuts, minimizing the impact of vibrations. - Calibration is conducted based on NIST traceability. - There are many delivery records for automotive onboard applications and aerospace-related fields.

- It can be used in a wide range with pipe diameters from 1/4" to 2" and flow rates from 0.95 to 947 L/min. - Due to its robust SUS316 construction, it can be used for a long time even in harsh environments. - Calibration is performed in accordance with NIST traceability. - It supports NPT and flange mounting. - Accessories such as K factor scalers, F/I and F/V converters, and repair kits are also available. - There are two types: NPT and flange mounting.

• Durable construction • Easy battery replacement, with a usage period of about 4 to 5 years • Compatible with AdBlue • Control is possible in liters, quarts, pints, and gallons.

It supports both transit and Doppler types and can be used independently. It is equipped with a rich array of sensors to accommodate various piping and also has a built-in 1 kg data logger. 《Specifications》 • Power Supply: Rechargeable lithium-ion battery • Output: Analog output: 4–20mA, Digital output: Open collector for integration and others • Display: Full-color touch panel • Accuracy: Transit type: ±1.0% F.S (for flow rates above 0.3 m/sec), Doppler type: ±2.0% F.S (for flow rates above 0.3 m/sec) • Indicator Standard: IP64 • Indicator Temperature Resistance: 80℃, Battery charging: -20 to 45℃ • Maximum Measured Flow Rate: Transit type 12 m/sec, Doppler type 12 m/sec • Repeatability: ±0.1% (reading value) • Detection Sensitivity: 0.0003 m/sec • Minimum Flow Rate for Accuracy: 0.3 m/sec • Operating Temperature: Transit type (DTTSU model: -40 to 90℃, DTTN model: -40 to 85℃), Doppler type -40 to 100℃ • Compatible Piping: SGP, SUS, PVC, PVDF, sanitary pipes, copper pipes • Required Straight Pipe Length: Upstream: more than 10 times the inner diameter, Downstream: more than 5 times the inner diameter

The VN2000 small-sized insertion vortex flow meter is capable of measuring the flow rate, mass flow, or BTU/energy of steam, gas, or liquid in high flow ranges. The flow meter simplifies installation with mounting pins. The element is machined from a solid block of stainless steel using CNC technology and is designed to withstand harsh environments both inside and outside the piping. Dual ceramic piezoelectric elements are press-fitted and bonded to a stainless steel insertion rod. There are no O-rings or seals inside, eliminating the risk of leakage to the sensor or electronic components. Since the sensor does not come into contact with the process fluid, it has a long lifespan.

The IOG volumetric flow meter is a gear-type flow meter that offers high precision at a low price. It is suitable for measuring high-viscosity liquids and corrosive fluids, and it can also measure small flow rates. - High precision and high reproducibility - Measurement range 0.04–700 l/min - Vertical and horizontal mounting - Low pressure loss - ATEX certified - FDA compliant

Electromagnetic flow meters have a proven track record in various industries such as water treatment, wastewater facilities, chemicals, papermaking, food, power, pharmaceuticals, and petrochemicals. They can measure flow rates without being affected by the specific gravity, pressure, temperature, or viscosity of the measuring fluid. Additionally, because there are no moving parts, cleaning of adherent substances is easy, and they exhibit excellent corrosion and wear resistance.

Area-type flow meters can be installed in any position or angle. They are widely used in various processes, including cooling and lubrication of machine tools, packaging, semiconductor manufacturing, die casting, and resin molding industries, as well as in the automotive, aerospace, and mining industries. Flow meters can also be used as gauges for visual inspection, flow switches, or as flow transmitters with digital and analog outputs.

The impeller-type flow meter features a distinctive design with six blades. The shape of the blades, which protrude against the flow of the fluid, enables stable measurement and reproducibility even at lower flow rates. There are models that are integrated with the body and models with a detachable sensor unit, with the detachable type offering cost advantages for large-diameter piping. The materials available include plastic and metal, and when combined with an optional thermometer, it is possible to measure thermal energy, making it suitable for a variety of applications.

Preso designs and manufactures patented Ellipse pitot tubes, industrial, municipal, and commercial venturis, COIN segment wedge flow meters, and various other measurement elements. Preso also produces process flow meters capable of differential pressure measurement with a calibration accuracy of ±1% or more and requiring a large pressure ratio. Additionally, they manufacture B-Plus and C+ metering balance valves for the HVAC industry.

DynaSonics has been providing products as a leader in ultrasonic flow measurement for over 30 years. DynaSonics' Doppler and transit time flow meters are widely used in unique thousands of applications across various industries, including water and wastewater treatment, oil, methane extraction from mineral deposits, cooling water for power plants, semiconductor process cooling water, HVAC (heating, ventilation, and air conditioning), and many others. DynaSonics is committed to providing on-site services to customers and continuously improving technology to meet the advanced demands of fluid measurement in factories and further developing its products.

The VISION turbine flow meter is a compact turbine flow meter for liquids. It is small, lightweight, low-cost, and requires no maintenance. 【Features】 - Lightweight body weighing approximately 20g - Supports flow rates up to 65 l/min - Compatible with high temperatures from -20℃ to a maximum of 100℃ - Complies with food sanitation laws It complies with food sanitation laws, making it suitable for use in beverages such as juice and in cooking and manufacturing processes. Since it can handle temperatures up to 100℃, it can be used for high-temperature water in cooking utensils and coffee machines. *For more details, please check the materials available for download in PDF format.

Square Head Technology The Square Head Vibrator technology, invented and patented by Wyco, offers the following advantages: The square head has up to 27% more surface area than a round head, allowing for faster work completion. Its unique orbital pattern allows for concrete compaction to be performed up to 50% faster. It provides a longer head lifespan compared to other designs. The square head is machined from solid bar stock and is heat-treated for added durability, eliminating thin screw-on head caps and using more material at the corners, which helps the head cool more effectively.