サニー・トレーディング Product Lineup

The ATI Q46C4 type 4-electrode conductivity meter is a water quality meter that meets the conductivity measurement needs of most liquids. It has a proven track record in drinking water, cooling water, chemical solutions, and other water treatment systems.

The Q46C2 conductivity meter is a highly precise and reliable measuring instrument for measuring the high purity water required in pure water systems. It features a large, easy-to-read LED display, and the sub-display can show temperature and other information. Since it may be appropriate to display values in resistivity units, the Q46C2 conductivity meter allows for the measurement unit to be changed.

The Q46P/R type pH/ORP meter is a highly accurate, reliable, and versatile measuring instrument. It is used for the routine monitoring of pH values in various liquid processing systems, including water supply and drainage, wastewater, cooling water, pure water, cleaning water in food manufacturing processes, and cooling water in chemical plants, among many others.

The Q46D dissolved oxygen meter is an ideal measurement control device that can maintain reliability for monitoring measurements throughout the entire year by utilizing an automatic cleaning function. It has a proven track record in biological processes at wastewater treatment plants.

The Q46H/79S total chlorine meter is resistant to interference from contaminants and can measure total chlorine concentration with high precision. It features a unique structure that prevents contact between the measurement liquid and the sensor, and it has a proven track record in special applications worldwide, such as drinking water, wastewater, and cooling towers. 【Features】 - High precision - Capable of handling a wide range of applications - Measures by gasifying the sample liquid

The Q46H/62-63 residual chlorine meter adopts a polarographic membrane sensor, allowing for the direct measurement of free chlorine, active chlorine, and combined chlorine (monochloramine) without the need for reagents. Due to its diaphragm-type sensor, it is less affected by changes in the measurement liquid or impurities, enabling the measurement of residual chlorine in electrolyzed hypochlorous water, seawater, wastewater, hot springs, and pure water. Additionally, since the electrode does not come into direct contact with the measurement liquid, it is less prone to contamination and has a long lifespan. By adding a pH sensor option, simultaneous measurement of chlorine and pH is possible. The pH correction function allows for measurements even when the pH value is high or fluctuating. It has a wide measurement range, capable of measuring low concentrations below 1 mg/L and high concentrations above 100 mg/L with a single unit. 【Features】 ■ No reagents required ■ Easy installation ■ Wide and flexible measurement range ■ Cost-effective *Demo units are available, so please feel free to inquire. *For more details, please refer to the PDF document or feel free to contact us.

The "Q46H/79PR type" is a total chlorine meter that allows for inline continuous measurement without reagents. It is suitable for managing effective chlorine (free chlorine and combined chlorine) after chloramine treatment and disinfection. Additionally, it can be used in seawater or low conductivity environments without the need for chemical reagent additions. Furthermore, options for pH measurement and additional outputs are available. 【Features】 ■ Inline continuous measurement without reagents ■ No need for chemical reagent additions ■ Usable in seawater and low conductivity environments ■ Options for pH measurement and additional outputs available *For more details, please refer to the PDF document or feel free to contact us.

The "Q46H/65" is a chlorine dioxide meter suitable for disinfection and sterilization systems, as it can continuously produce chlorine dioxide water. Being a diaphragm type, it can operate in environments with low conductivity and many impurities. Additionally, it has multiple outputs, including 4-20mA analog output, PID control, and digital communication, making it applicable for measuring any chlorine dioxide water. 【Features】 ■ Displays chlorine dioxide and pH on the indicator ■ Remote monitoring and recording capabilities ■ Ideal for disinfection and sterilization systems ■ Diaphragm type, suitable for environments with low conductivity and many impurities ■ Applicable for measuring any chlorine dioxide water *For more details, please refer to the PDF document or feel free to contact us.

The "Q46F model" can be used for continuous measurement of fluoride ions in wastewater, effluent, and drinking water. It employs a fluoride ion selective electrode (ISE) and can measure fluoride ions from 0.1 PPM to a maximum of 1000 PPM. With its simple structure, it allows for low-cost continuous measurement of fluoride ions. *For more details, please refer to the PDF document or feel free to contact us.

The "Q46S/66 model" is a measuring device that can measure residual sulfite ions and reduce the consumption of chemicals that are being used excessively. This product allows for the measurement of sample water without contact between the sensor and the fluid, enabling the removal of wastewater for measurement. A small amount of residual sulfite ions during dechlorination treatment is effective for complete dechlorination, and measuring the concentration of residues can control the chemical dosing, significantly reducing chemical costs. 【Features】 ■ Selectively converts sulfite ions to sulfur dioxide (sulfurous gas) for measurement ■ Sample water and sensor do not come into contact with the fluid, allowing for the removal of wastewater for measurement ■ Power supply can be selected as 115 or 230 VAC, 60/60 Hz ■ Maintains stable costs for chemicals ■ Controls chemical dosing through the measurement of residue concentration, significantly reducing chemical costs ■ Allows for savings on chemicals *For more details, please refer to the PDF document or feel free to contact us.

The "Q46H/64 type" dissolved ozone meter can continuously measure dissolved ozone in water without the need for reagents. It employs a diaphragm-type polarographic sensor, which means the electrode does not come into direct contact with the measuring liquid. As a result, it is less affected by impurities and can be used for measurements in wastewater. The electrode is resistant to contamination, ensuring a long lifespan and cost-effective usage. Additionally, it can handle a wide range of concentrations, from low levels below 100 ppb to high levels above 100 ppm. 【Features】 ■ Strong resistance to contamination achieved through the diaphragm-type polarographic sensor that protects the electrode ■ No adjustment needed after sensor replacement ■ Large LCD display ■ Optional wide-range measurement from 0 to 200 PPB to 0 to 200 PPM ■ Standard PID control function can be assigned to analog output *For more details, please refer to the PDF document or feel free to contact us.

The "Q4Q46/88 model" is an SS meter that can measure and monitor particles in various water and wastewater in real-time. Measurements can be taken by inserting an immersion-type sensor into the process tank, or for a wide range of measurements, a sensor using optical backscatter technology is employed. The measurement results are displayed on the Q46 electronic unit located near the sensor. 【Specifications】 ■ Measurement target: SS concentration ■ Measurement range: 0-100.0 / 0-1000 mg/l, 0-10.00 g/l ■ Sensor type: Flow-through type ■ Equipped with automatic air cleaning function *For more details, please refer to the PDF document or feel free to contact us.

The turbidity meter "Q46 / 76 model" offers precision and reliability for low-range turbidity measurements and is widely used around the world. It is designed to be suitable for drinking water systems and industrial water treatment. 【Features】 ■ High precision low-range turbidity measurement ■ Proven track record worldwide ■ Optional features available *For more details, please refer to the PDF document or feel free to contact us.

Sunny Trading leverages over 50 years of experience to import high-performance and reliable products from around the world, providing consistent sales including technical after-sales service. Additionally, we design and manufacture various devices equipped with elements tailored to our customers' specifications, achieving numerous accomplishments. In this catalog, we introduce our company profile as well as the entire lineup of products we handle. 【Business Activities】 ■ Design and manufacturing of various gas pressurization, pumping, filling, and pressure-tightness testing equipment, hydraulic, oil temperature, and flow measurement devices, automatic discharge devices, oxygen generation devices, filling equipment, etc. *For more details, please refer to the PDF materials or feel free to contact us.

The ATI ChlorLog provides compact measurement and logging of residual chlorine concentration. It is ideal for data collection of residual chlorine concentration in remote locations such as water treatment plants. 【Features】 - Continuous measurement of residual chlorine concentration - Choice of free chlorine, combined chlorine, or total chlorine sensors - Membrane-type polarographic sensor that does not require reagents *For more details, please refer to the PDF document or feel free to contact us.

- Since it uses a diaphragm-type polarographic sensor, no reagents are required and maintenance is easy. The cost of maintenance is also low. - The electrodes are protected by a diaphragm, making them resistant to dirt and less susceptible to the electrical conductivity of the measurement solution. - The flow cell can be selected from two types: waste water type and circulation type. - The measurement range can be selected from one point among 0-2, 0-20, and 0-200 ppm.

- No reagents required. Maintenance consists only of replacing the electrolyte and membrane. - The electrodes are protected by a diaphragm, making them resistant to dirt and less affected by electrical conductivity. - By optionally installing a pH sensor, simultaneous measurement of ozone concentration and pH is possible. - It can be offered at a lower cost compared to UV type.

The SLSP-210 portable sodium hypochlorite analyzer can measure high concentrations of sodium hypochlorite from 0.01% to 16%. It uses an optical sensor, allowing for measurement without the need for reagents. There is no need to shield the sample, making it easy to measure sodium hypochlorite concentration on-site. Features: - Capable of measuring high concentrations of sodium hypochlorite from 0.01% to 16% - Simple design allows for easy measurement by just pouring the sample - Measurements can be taken without being affected by ambient light - No reagents required - Data recording function for 30,000 readings - Equipped with temperature compensation function

In the beverage industry, managing water quality during the manufacturing process is crucial to ensure product safety. In particular, the concentration of residual chlorine is an important indicator for maintaining a balance between sterilization effectiveness and safety. Inadequate measurement of residual chlorine concentration can lead to product quality deterioration and health risks for consumers. The ATI Q46H/62-63 type residual chlorine meter can directly measure free chlorine, effective chlorine, and combined chlorine (monochloramine) without the need for reagents. This contributes to the efficient management of drinking water quality and the provision of safe products. 【Application Scenarios】 - Water quality management in beverage manufacturing - Cleaning water management in food factories - Measurement of residual chlorine in groundwater and well water 【Benefits of Implementation】 - Improved quality management through accurate understanding of residual chlorine concentration - Reduction in reagent purchase costs - Decreased operational burden through measurement efficiency

In the water supply industry, water quality management is crucial for ensuring a safe water supply. In particular, the concentration of residual chlorine must be strictly managed as an indicator of disinfection effectiveness. If the residual chlorine concentration is too low, the safety of the water is compromised, and if it is too high, there are concerns about its effects on human health. The ATI Q46H/62-63 type residual chlorine meter employs a diaphragm-type sensor, allowing for direct measurement of residual chlorine without the use of reagents. This enables accurate and rapid water quality management, contributing to the supply of safe water. 【Application Scenarios】 - Measurement of residual chlorine concentration at water purification plants - Monitoring of residual chlorine concentration in distribution networks - Management of residual chlorine concentration in water storage tanks 【Benefits of Implementation】 - Optimization of water quality management through accurate understanding of residual chlorine concentration - Reduction in reagent purchase costs - Prompt response to abnormalities due to rapid measurement

In the food industry, hygiene management during the manufacturing process is extremely important, and proper management of residual chlorine concentration during the sterilization process is essential to ensure product quality and safety. If the residual chlorine concentration is inappropriate, the sterilization effect may be insufficient, increasing the risk of food poisoning. The ATI Q46H/62-63 type residual chlorine meter employs a diaphragm-type polarographic sensor, allowing for the direct measurement of free chlorine, active chlorine, and combined chlorine (monochloramine) without the need for reagents. This enables accurate monitoring of residual chlorine concentration during the sterilization process in food manufacturing and facilitates appropriate management. 【Usage Scenarios】 - Monitoring residual chlorine concentration during the sterilization process in food factories - Measuring residual chlorine concentration in drinking water sterilization treatment - Managing residual chlorine concentration in food washing water 【Benefits of Implementation】 - Reduction in reagent purchase costs - Stabilization of product quality through improved measurement accuracy - Early detection of abnormalities through rapid measurement - Increased lifespan due to diaphragm-type sensors

In pool hygiene management, water quality is extremely important for protecting the health of users. In particular, the concentration of residual chlorine is one of the key indicators for evaluating pool water quality. Maintaining an appropriate residual chlorine concentration is essential to suppress the growth of bacteria and viruses, providing a safe swimming environment. If measuring the residual chlorine concentration is cumbersome, management can become complicated, leading to potential oversights. The ATI Q46H/62-63 type residual chlorine meter requires no reagents and can directly measure free chlorine, effective chlorine, and combined chlorine. This streamlines pool water quality management and ensures user safety. 【Usage Scenarios】 - Measuring residual chlorine concentration in pools - Water quality management in bathing facilities - Monitoring circulation filtration systems 【Benefits of Implementation】 - Improved safety through accurate water quality management - Reduction in reagent costs - Reduced management burden through efficient measurement

In the pharmaceutical industry, the accurate management of residual chlorine concentration is essential to ensure product quality during the production of pure water. Residual chlorine plays a crucial role in reducing the risk of microbial contamination in the manufacturing process, but excessive residual chlorine can negatively impact product quality. The ATI Q46H/62-63 type residual chlorine meter can directly measure residual chlorine without the use of reagents, contributing to the simplification of measurements and improvement of accuracy. 【Usage Scenarios】 - Pure water production plants - Pharmaceutical manufacturing processes - Research facilities 【Benefits of Implementation】 - Improved product quality through accurate monitoring of residual chlorine concentration - Reduction in reagent purchase costs and management workload - Increased reliability of measurement data

In the cooling tower industry, water quality management is crucial to suppress the growth of Legionella bacteria. Particularly in cooling towers where temperatures are high and water tends to stagnate, proper management of residual chlorine concentration is essential to reduce the risk of Legionnaires' disease. Inadequate water quality management can promote the growth of Legionella bacteria and potentially cause health hazards. The ATI Q46H/62-63 type residual chlorine meter employs a diaphragm-type sensor and can directly measure residual chlorine concentration without the need for reagents. 【Usage Scenarios】 - Water quality management for cooling towers - Measures against Legionella bacteria - Measurement of free chlorine, effective chlorine, and combined chlorine (monochloramine) 【Benefits of Implementation】 - Reduction of Legionnaires' disease risk - Increased efficiency in water quality management - Accurate understanding of residual chlorine concentration

In the boiler industry, it is important to properly manage the residual chlorine concentration in boiler water to prevent corrosion of pipes and equipment. Corrosion can shorten the lifespan of equipment and increase the risk of operational shutdowns. The ATI Q46H/62-63 type residual chlorine meter employs a diaphragm-type sensor to accurately measure the residual chlorine concentration in boiler water, contributing to corrosion prevention. 【Application Scenarios】 - Boiler water treatment plants - Cooling water systems - Pure water production processes 【Benefits of Implementation】 - Reduction of equipment issues due to corrosion - Extension of equipment lifespan - Achievement of stable operations

In the wastewater treatment industry, strict management of the quality of discharged water is required. In particular, the concentration of residual chlorine is an important indicator for assessing environmental impact. Maintaining an appropriate residual chlorine concentration contributes not only to compliance with regulations but also to environmental conservation. The ATI Q46H/62-63 type residual chlorine meter employs a diaphragm-type sensor and can directly measure free chlorine, total chlorine, and combined chlorine without the need for reagents. 【Usage Scenarios】 - Management of discharged water at wastewater treatment plants - Management of discharged water from septic tanks - Water quality testing 【Benefits of Implementation】 - Optimization of water quality management through accurate measurement of residual chlorine concentration - Reduction of reagent costs - Improvement of measurement accuracy through pH correction functionality