サニー・トレーディング List of Products and Services

Pneumix is an air-driven mixer that can be used not only for transferring fluids but also as a mixer. It is ideal for homogeneous mixing and stirring of fluids during transfer, and is a type of air-operated pump that fits container openings. It is perfect for stirring and transferring materials such as paints and inks. 【Features】 - There is no need to rotate or shake the container to homogenize the internal fluid. - There is no need to transfer to another container for stirring. - It saves time and labor costs. - Made from AISI316L and PP materials. - Custom types compatible with containers can also be produced. For more details, please contact us or download the catalog.

• Other pumps

This catalog introduces a wide range of air-driven hydraulic pumps from Haskel, which our company handles. Haskel manufactures and sells a variety of high-quality, high-pressure hydraulic and gas pressure equipment, including air-driven hydraulic pumps with a wide discharge range, air amplifiers, air/hydraulic-driven gas boosters, high-pressure valves and fittings, as well as various pressure line testing equipment. In this catalog, we feature the "0.33HP M Series" with a single air head, as well as the "2 & 2.2HP/3HP Series" with double and triple air heads, and the "6HP/8HP Series" with a single air head and double action. **Features and Capabilities of Haskel Air-Driven Hydraulic Pumps** - Safe air-driven operation - Pressure can rise up to a maximum of 700MPa - Cycle speed can be freely adjusted - Stops at the required pressure without consuming power during the stall - Trouble-free during start and stop *For more details, please refer to the PDF document or feel free to contact us.*

• Other pumps

The "Metal Diaphragm Compressor" is a product handled by our company from FLUITRON. It can be used for pressurizing and filling gases such as hydrogen, oxygen, helium, argon, ethylene, natural gas, and fluorine gas. Using a triple-structured diaphragm, it supplies gas without leaks and ensures cleanliness. It can accommodate a wide range from small to large sizes according to pressure and flow rate. 【Features】 ■ The gas is clean with no contamination concerns ■ No leaks ■ Complies with KHK testing in Japan ■ Made of rust-resistant materials for durability and long life ■ Available in single-stage, two-stage, multi-stage compression, and various multi-composite models ■ Design and manufacturing of standalone units and systems ■ Easy operation and maintenance ■ Standard equipped with an automatic leak detection system *For more details, please refer to the PDF materials or feel free to contact us.

• Piping Materials
• Other machine elements

This catalog introduces a wide range of products from BuTech, including "valves, fittings, tubes, and accessories" that we handle. The company was established as a manufacturer specializing in components for high-pressure piping systems. Their standard product range, from low pressure to ultra-high pressure, can meet most requirements, and they also respond to requests for special specifications in terms of materials and design conditions. In this catalog, we feature products such as the "Ball Valve (210~1380BAR) 2-way on-off type" with a stem that has no blow-off and a high safety ball type, as well as trunnion valves, tube valves, and accessories. [Items Listed] ■ Ball Valves / Trunnion Valves ■ Pipe Valves (690~1030BAR) NPT Thread Type 1/2 ■ Tube Valves ■ Structure and Options for Needle Valves ■ Accessories *For more details, please refer to the PDF document or feel free to contact us.

• valve
• tube
• Other machine elements

◆ Single-stage compression type: Suitable for small test machines, with low discharge volume for pressurization, where efficiency is not very important for pressure equipment. * The maximum discharge pressure is (area ratio) × (driving air pressure). ◆ Single-stage compression type: Compared to the AG type, it has approximately double the discharge volume per cycle and benefits from the suction gas pressure assisting the discharge pressure, making it suitable for applications requiring large flow rates at medium to low pressure. * The maximum discharge pressure is [(area ratio) × (driving air pressure)] + (suction gas pressure). ◆ Double-stage compression type: * As a double-stage compression type, it has good discharge volume and can achieve a high compression ratio (up to 1:100) as a booster. ◆ Multi-stage compression type: By connecting multiple units of the above types in series, it can be used for pressure lines requiring high compression ratios (up to 250:1 or more) and large flow rates. Example: AGD-4-AGT15/75 (three-stage compression multi-booster)

• Piping Materials

The "Pump with Heater/Cooler Jacket" can be used for industrial pumps and sanitary pumps. It is a pump equipped with a heater and cooler to maintain high/low temperatures of the fluid being discharged. 【Features of the Pump with Heater/Cooler Jacket】 ○ By heating the fluid, it is possible to reduce viscosity and increase discharge volume. ○ By flowing low-temperature fluids, it is possible to maintain the temperature of products. ○ The heating/cooling fluid continuously circulates within the jacket. ○ The jacket covers the entire area of the pump's wetted parts. For more details, please contact us or download the catalog.

• Other pumps

Quality management system compliant with ISO 9001 and DIN EN Leak-free and contamination-free electric diaphragm pumps We also offer piston pump products. Various accessories such as safety valves, stroke adjustments, and inverters are available. Additionally, we can propose medication injection systems. 【Product Lineup】 Electric double diaphragm pumps (single, double, triple) Electric piston pumps *For more details, please contact us or download the PDF for more information.

• Other pumps
• Positive Displacement Pump
• Syringe Pump

ICC (Industrial Clutch Altra Industrial Motion) offers high-quality and affordable clutches and brakes. Sunny Trading not only sells parts but also provides maintenance support. They are widely used in steel, shipbuilding, metal processing, automotive, paper manufacturing, and construction machinery for drive stops, punch presses, high-speed shears, and more. Asbestos is not used in the materials for clutches and brakes. 【Features】 - Air-operated - High-speed and high-frequency cycles - Over 60 types in the lineup - Asbestos-free

• clutch
• brake

The "Air-Driven Metal Diaphragm Pump (Industrial Pump Made of AISI316)" is a diaphragm pump that incorporates a SUS316 valve seat into the pump housing. The pump operates quietly and is capable of delivering viscous fluids. The inner surface of the wetted parts is completely smooth, and no metal components are used in the wetted areas. 【Features】 ○ Safe design ○ Flexible installation ○ Compact and robust structure ○ High-performance diaphragm For more details, please contact us or download the catalog.

• Other pumps

The "integrated pump-type plastic damper" is made of PE, PTFE, conductive PE, and conductive PTFE materials. When using conductive polymer (code Z.R) as the material, the pump itself acts as a ground, eliminating the need for grounding even when used with flammable fluids or in explosion-proof areas. 【Features】 ○ Space-saving design by installing the damper on top of the pump. ○ Reduction of pressure fluctuations and prevention of water hammer. ○ Protection of instruments and piping installed downstream. For more details, please contact us or download the catalog.

• Other pumps

The "metal damper" is a damper that is mounted integrally with the pump. In addition to aluminum material and AISI316 (industrial series), there is also a "sanitary specification AISI316L - polished product." When handling flammable fluids in explosive areas, a damper made of PE conductive (code R) material must be used. For safety, a separate grounding must be taken. 【Features】 ○ The pump and damper can be shipped separately. ○ If the damper is not connected to the pump, it is necessary to ground the damper itself. ○ Air pressure: 0.8MPa ○ PE: 70℃ PTFE: 120℃ Metal: 120℃ ○ Reduction of pressure fluctuations ○ Water hammer countermeasures ○ Protection of piping and instruments For more details, please contact us or download the catalog.

• Other pumps

The "Air-Driven Diaphragm Pump (ATEX Compliant Pump)" is made of conductive plastic materials PE and PTFE (non-metallic pump) and is a pump that can be grounded. This design allows for the use of solvents, alcohols, and other volatile fluids without generating static electricity hazards. This feature is also applicable to pumps made of aluminum, cast iron, and SUS316. 【Features】 ○ Air-Driven Diaphragm Pump ○ ATEX Compliant For more details, please contact us or download the catalog.

• Other pumps

All sanitary series pumps can be equipped with a special device. We offer trolleys suitable for all pump sizes as "trolley-mounted pumps." Additionally, "pumps with heater/cooler jackets" are equipped with heaters and coolers to maintain high/low temperatures of the fluid through the process discharge. 【Features of Pumps with Heater/Cooler Jackets】 - The heating or cooling fluid circulates continuously within the jacket. - The jacket covers the entire area of the pump's contact parts. - Can be installed on all sanitary series pumps. For more details, please contact us or download the catalog.

• Other pumps

The "Backflushing System (Ball Lift System)" pump can empty its interior, including the discharge line, without removing or disassembling the pump. A bypass system is provided in the housing, and operations can be performed using a manual valve (codes BF1, BF2, BF3) or an air-operated valve (codes BF4, BF5). 【Features】 〇 Discharges residual liquid from the pump. 〇 Manual type: BF1, BF2, BF3 (EPDM, PTFE, FPM) 〇 Air type: BF4, BF5 (EPDM, PTFE) 〇 By attaching a 4-2 direction switching valve (sold separately), it can automatically operate in case of pump interruption. Metal ball lift system (BF2 option) 〇 By turning the metal block pins located on both sides of the pump housing, the manual valve can be opened. 〇 The suction side can be completely drained. For more details, please contact us or download the catalog.

• Other pumps

The "Barrier Chamber System" is a PE barrier chamber filled with a non-conductive liquid between two diaphragms to meet advanced safety standards. A sensor for measuring conductivity is attached to monitor the liquid, and if a diaphragm fails and a change occurs in the liquid, the sensor detects it and sends an anomaly signal to the control device. 【Three Types of Barrier Systems】 ○ BC1: Standard Barrier System (with sensor) ○ BC2: Barrier System (with sensor and control device) ○ BC3: Barrier System (with sensor and control device) for explosion-proof use - ATEX For more details, please contact us or download the catalog.

• Other pumps

The "Metal Diaphragm Pump (Special Material Pump)" includes aluminum pumps with PTFE coating, cast iron pumps with PE conductive coating (conductive polyethylene) on the center section, metal pumps with integrated heaters and cooling jackets, and pumps with optional handles for drum pump use. 【Features of Aluminum Pumps with PTFE Coating】 ○ Suitable for fluids similar to those used in AISI316 pumps ○ Pump connections are made of AISI316 ○ Ideal for the printing industry and ink manufacturing industry For more details, please contact us or download the catalog.

• Other pumps

The "Helix V Series" is an inline vertical multistage pump without priming, available in two types (16bar and 25bar). The impeller, diffuser, and pump casing are made of stainless steel 304 or optionally 316L. The motor shaft and pump shaft conform to IEC standards and are assembled with a flexible coupling, additionally reinforced with large bearings to support thrust loads (over 7.5kW). 【Features】 ○ The flanges for V1 type and V18 type allow for motor replacement → Uses a bidirectional cartridge mechanical seal for maintenance and repair ○ All materials are suitable for drinking water → Certified by Germany's KTW and the UK's WRC For more details, please contact us or download the catalog.

• Other pumps

We would like to introduce our lineup of equipment for sanitary processes (drum pumps/diaphragm pumps). We offer products suitable for sanitary processes, including a centrifugal drum pump with a maximum flow rate of 35 GPM (132 LPM), as well as diaphragm pumps that have obtained 3A certification and are FDA compliant. 【Lineup of Equipment for Sanitary Processes】 ○ Drum Pump - Centrifugal ○ Drum Pump - Single-Screw ○ Diaphragm Pump - 3A Certified ○ Diaphragm Pump - FDA Compliant, and more For more details, please contact us or download the catalog.

• Other pumps

NewIsomon-2 can measure hydrogen peroxide gas over a wide range with a single unit. For example, it can measure high concentration levels (0-2000ppm) during the sterilization process of hydrogen peroxide gas in pharmaceutical and food factories, as well as low concentration levels (0-100ppm) after aeration, all with one device. 【Features】 - It has a built-in suction pump, allowing for quick concentration measurements. - It comes standard with a 4-20mA output and alarm output necessary for control. - It can measure concentrations within the range of 0-2000ppm with high precision. *Demo units are available. Please feel free to contact us.

• Other measurement, recording and measuring instruments

The Q46H/62-63 residual chlorine meter adopts a polarographic membrane sensor, allowing for the direct measurement of free chlorine, active chlorine, and combined chlorine (monochloramine) without the need for reagents. Due to its diaphragm-type sensor, it is less affected by changes in the measurement liquid or impurities, enabling the measurement of residual chlorine in electrolyzed hypochlorous water, seawater, wastewater, hot springs, and pure water. Additionally, since the electrode does not come into direct contact with the measurement liquid, it is less prone to contamination and has a long lifespan. By adding a pH sensor option, simultaneous measurement of chlorine and pH is possible. The pH correction function allows for measurements even when the pH value is high or fluctuating. It has a wide measurement range, capable of measuring low concentrations below 1 mg/L and high concentrations above 100 mg/L with a single unit. 【Features】 ■ No reagents required ■ Easy installation ■ Wide and flexible measurement range ■ Cost-effective *Demo units are available, so please feel free to inquire. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Q46H/79PR type" is a total chlorine meter that allows for inline continuous measurement without reagents. It is suitable for managing effective chlorine (free chlorine and combined chlorine) after chloramine treatment and disinfection. Additionally, it can be used in seawater or low conductivity environments without the need for chemical reagent additions. Furthermore, options for pH measurement and additional outputs are available. 【Features】 ■ Inline continuous measurement without reagents ■ No need for chemical reagent additions ■ Usable in seawater and low conductivity environments ■ Options for pH measurement and additional outputs available *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The Q46H/79S total chlorine meter is resistant to interference from contaminants and can measure total chlorine concentration with high precision. It features a unique structure that prevents contact between the measurement liquid and the sensor, and it has a proven track record in special applications worldwide, such as drinking water, wastewater, and cooling towers. 【Features】 - High precision - Capable of handling a wide range of applications - Measures by gasifying the sample liquid

• Other measurement, recording and measuring instruments

The "Q46H/65" is a chlorine dioxide meter suitable for disinfection and sterilization systems, as it can continuously produce chlorine dioxide water. Being a diaphragm type, it can operate in environments with low conductivity and many impurities. Additionally, it has multiple outputs, including 4-20mA analog output, PID control, and digital communication, making it applicable for measuring any chlorine dioxide water. 【Features】 ■ Displays chlorine dioxide and pH on the indicator ■ Remote monitoring and recording capabilities ■ Ideal for disinfection and sterilization systems ■ Diaphragm type, suitable for environments with low conductivity and many impurities ■ Applicable for measuring any chlorine dioxide water *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Weighing Control

The "F12 model" is a hydrogen peroxide concentration meter for safety management and concentration management. It can measure high concentration ranges (0-2000ppm) used in sterilization processes and low concentration ranges (0-100ppm) to check residual concentrations after aeration. Additionally, it has a strong track record with major pharmaceutical companies, allowing for measurements that are close to theoretical values due to calibration with actual gas. 【Features】 ■ Strong track record with major pharmaceutical companies ■ Capable of measuring values close to theoretical values due to calibration with actual gas *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "F12 model" is a peracetic acid gas concentration meter. It is a fixed installation type, and with various measurement ranges and options available, it can accommodate a wide range of specifications. In addition to this product, we also offer a rich selection of sensors for hydrogen peroxide, peracetic acid, chlorine dioxide, ozone, EOG gas, and more. 【Sensor Selection Table】 ■ Measured Gas: Peracetic Acid / Peracetic Acid / Acetic Acid ■ Sensor Model: 00-1704 / 00-1705 / 00-1045 ■ Minimum Range: 0-1ppm / 0-10ppm / 0-100ppm ■ Maximum Range: 0-5ppm / 0-100ppm / 0-500ppm ■ Standard: 2ppm / 20ppm / 100ppm *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "F12 model" is an ozone gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "EOG gas concentration meters," "chlorine dioxide gas concentration meters," and "formaldehyde gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Ozone ■ Sensor Model: 00-1163 / 00-1008 / 00-1009 / 00-1358 ■ Minimum Range: 0–500 ppb / 0–1 ppm / 0–5 ppm / 0–200 ppm ■ Maximum Range: 0–2000 ppb / 0–5 ppm / 0–200 ppm / 0–1000 ppm ■ Standard: 0–1000 ppb / 2 ppm / 20 ppm / 1000 ppm ■ Auto Test Generator: 00-1538 * For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "F12 type" is a chlorine dioxide gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "EOG gas concentration meters," "ozone gas concentration meters," and "formaldehyde gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Chlorine Dioxide ■ Sensor Model: 00-1004 / 00-1005 / 00-1359 / 00-1425 ■ Minimum Range: 0-1ppm / 0-5ppm / 0-200ppm / 0-1ppm ■ Maximum Range: 0-5ppm / 0-200ppm / 0-1000ppm / 0-5ppm ■ Standard: 2ppm / 20ppm / 200ppm / 5ppm ■ Auto Test Generator: 00-1538 / 00-1538 / - / 00-1538 *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "F12 model" is a formaldehyde gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "EOG gas concentration meters," "ozone gas concentration meters," and "chlorine dioxide gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Formaldehyde ■ Sensor Model: 00-1040 / 00-1349 ■ Minimum Range: 0-20 ppm / 0-500 ppm ■ Maximum Range: 0-200 ppm / 0-2000 ppm ■ Standard: 20 ppm / 1000 ppm ■ Auto Test Generator: 00-1539 *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "F12 model" is an EOG gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "ozone gas concentration meters," "chlorine dioxide gas concentration meters," and "formaldehyde gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Ethylene Oxide ■ Sensor Model: 00-1039 ■ Minimum Range: 0–20 ppm ■ Maximum Range: 0–200 ppm ■ Standard: 20 ppm ■ Auto Test Generator: 00-1539 *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

It supports the detection of over 30 types of gases, including hydrogen fluoride, ozone, and chlorine. By simply attaching the target gas sensor module to the gas detector, you can detect low-concentration gas leaks and measure high-concentration gas levels. 【Features】 ■ Easy to replace due to the use of smart sensors, eliminating the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - Is type only ■ Large and easy-to-read LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Q46F model" can be used for continuous measurement of fluoride ions in wastewater, effluent, and drinking water. It employs a fluoride ion selective electrode (ISE) and can measure fluoride ions from 0.1 PPM to a maximum of 1000 PPM. With its simple structure, it allows for low-cost continuous measurement of fluoride ions. *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment
• Other process controls
• Other measurement, recording and measuring instruments

The "Q46S/66 model" is a measuring device that can measure residual sulfite ions and reduce the consumption of chemicals that are being used excessively. This product allows for the measurement of sample water without contact between the sensor and the fluid, enabling the removal of wastewater for measurement. A small amount of residual sulfite ions during dechlorination treatment is effective for complete dechlorination, and measuring the concentration of residues can control the chemical dosing, significantly reducing chemical costs. 【Features】 ■ Selectively converts sulfite ions to sulfur dioxide (sulfurous gas) for measurement ■ Sample water and sensor do not come into contact with the fluid, allowing for the removal of wastewater for measurement ■ Power supply can be selected as 115 or 230 VAC, 60/60 Hz ■ Maintains stable costs for chemicals ■ Controls chemical dosing through the measurement of residue concentration, significantly reducing chemical costs ■ Allows for savings on chemicals *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Water quality testing
• Instrumentation and Control Systems

The "Q46H/64 type" dissolved ozone meter can continuously measure dissolved ozone in water without the need for reagents. It employs a diaphragm-type polarographic sensor, which means the electrode does not come into direct contact with the measuring liquid. As a result, it is less affected by impurities and can be used for measurements in wastewater. The electrode is resistant to contamination, ensuring a long lifespan and cost-effective usage. Additionally, it can handle a wide range of concentrations, from low levels below 100 ppb to high levels above 100 ppm. 【Features】 ■ Strong resistance to contamination achieved through the diaphragm-type polarographic sensor that protects the electrode ■ No adjustment needed after sensor replacement ■ Large LCD display ■ Optional wide-range measurement from 0 to 200 PPB to 0 to 200 PPM ■ Standard PID control function can be assigned to analog output *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other process controls
• Water quality testing

The "Q4Q46/88 model" is an SS meter that can measure and monitor particles in various water and wastewater in real-time. Measurements can be taken by inserting an immersion-type sensor into the process tank, or for a wide range of measurements, a sensor using optical backscatter technology is employed. The measurement results are displayed on the Q46 electronic unit located near the sensor. 【Specifications】 ■ Measurement target: SS concentration ■ Measurement range: 0-100.0 / 0-1000 mg/l, 0-10.00 g/l ■ Sensor type: Flow-through type ■ Equipped with automatic air cleaning function *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other environmental analysis equipment
• Other process controls

The turbidity meter "Q46 / 76 model" offers precision and reliability for low-range turbidity measurements and is widely used around the world. It is designed to be suitable for drinking water systems and industrial water treatment. 【Features】 ■ High precision low-range turbidity measurement ■ Proven track record worldwide ■ Optional features available *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment
• Water quality testing
• Other measurement, recording and measuring instruments

The Q46D dissolved oxygen meter is an ideal measurement control device that can maintain reliability for monitoring measurements throughout the entire year by utilizing an automatic cleaning function. It has a proven track record in biological processes at wastewater treatment plants.

• Other physicochemical equipment
• Water quality testing
• Instrumentation and Control Systems

In the water treatment industry, accurate measurement of residual hydrogen peroxide concentration in wastewater is required. Hydrogen peroxide is used for disinfection and odor control, but excessive concentrations can pose a burden on the environment. The Q46/84 hydrogen peroxide meter continuously measures the concentration of hydrogen peroxide, enabling efficient control to address this issue. Being a reagent-free type, it helps reduce running costs while contributing to the optimization of the water treatment process. 【Application Scenes】 - Wastewater treatment facilities - Water purification plants - Industrial wastewater management 【Benefits of Implementation】 - Optimization of hydrogen peroxide usage - Reduction of environmental impact - Increased efficiency of water treatment processes

• Other physicochemical equipment
• Water quality testing
• Instrumentation and Control Systems

In infection control at hospitals, proper concentration management of disinfectants is crucial. Hydrogen peroxide is used as an effective disinfectant, but if its concentration is not appropriate, it may not be sufficiently effective or could pose risks due to excessive use. The Q46/84 hydrogen peroxide meter continuously measures the concentration of hydrogen peroxide in wastewater, enabling proper concentration management. This is expected to enhance the efficiency and safety of infection control measures. 【Usage Scenarios】 - Wastewater treatment facilities within hospitals - Areas where concentration management of disinfectants is necessary - Monitoring the use of hydrogen peroxide in infection control 【Benefits of Implementation】 - Optimization of disinfection effectiveness - Reduction of risks from excessive use - Increased efficiency of infection control measures

• Other physicochemical equipment
• Water quality testing
• Instrumentation and Control Systems

In the food industry, hygiene management during the manufacturing process is extremely important. In particular, proper concentration management of hydrogen peroxide is essential to maintain food quality and reduce risks such as food poisoning. Improper concentration management can lead to reduced sterilization effectiveness or impact on food due to excessive use. The Q46/84 hydrogen peroxide meter continuously measures the concentration of hydrogen peroxide, enabling efficient sterilization management. 【Usage Scenarios】 - Sterilization processes in food manufacturing lines - Wastewater treatment in food processing facilities - Cleaning of food storage containers 【Benefits of Implementation】 - Real-time monitoring of hydrogen peroxide concentration to maintain optimal sterilization effectiveness - Reduction of excessive chemical use, contributing to cost savings and reduced environmental impact - Improvement in product quality and safety

• Other physicochemical equipment
• Water quality testing
• Instrumentation and Control Systems

In the pharmaceutical industry, validating the sterilization process is essential to ensure product quality. Hydrogen peroxide is widely used as a sterilant, and managing its concentration is a critical factor that affects sterilization efficacy. Improper concentration management can lead to sterilization failures and product contamination. The Q46/84 hydrogen peroxide meter continuously measures the concentration of hydrogen peroxide, enabling efficient management of the sterilization process. 【Application Scenarios】 - Sterilization processes in pharmaceutical manufacturing - Environmental monitoring in clean rooms - Management of hydrogen peroxide concentration in manufacturing water 【Benefits of Implementation】 - Improved reliability of the sterilization process - Cost reduction through optimization of hydrogen peroxide usage - Enhanced product quality and compliance adherence

• Other physicochemical equipment
• Water quality testing
• Instrumentation and Control Systems

In the semiconductor manufacturing industry, managing the cleanliness of the manufacturing process is a crucial factor that affects product quality. In particular, the concentration management of hydrogen peroxide (H2O2) used in the cleaning process is essential for preventing contamination on the wafer surface and improving yield. Improper concentration management can lead to product defects and performance degradation. The Q46/84 hydrogen peroxide meter allows for continuous measurement of hydrogen peroxide concentration, enabling efficient cleanliness management. 【Usage Scenarios】 - Wastewater treatment processes in semiconductor manufacturing plants - Wafer cleaning processes - Chemical management 【Benefits of Implementation】 - Improved yield through optimization of hydrogen peroxide concentration - Reduced running costs due to reagent-free operation - Early detection of anomalies through real-time concentration monitoring

• Other physicochemical equipment
• Water quality testing
• Instrumentation and Control Systems

The Q46/84 type hydrogen peroxide meter is designed to continuously measure H2O2 in aqueous solutions. Hydrogen peroxide is used for disinfection, odor control, oxygen treatment, and various controls such as cyanide oxidation, and measuring it allows for efficient control. *We also have demo units available, so please feel free to contact us.*

• Other physicochemical equipment
• Water quality testing
• Instrumentation and Control Systems

The Q46/85 peracetic acid meter features a diaphragm-type sensor, making it resistant to interfering substances and capable of handling water quality with low conductivity. It is used for cleaning pipes in the food industry, disinfecting peracetic acid (PAA) production equipment, washing food, and disinfecting cooling water systems. It is a reliable measuring instrument for online real-time measurement of peracetic acid (PAA). Additionally, it is not affected by changes in the concentration of hydrogen peroxide present in the solution.

• Water quality testing
• Weighing Control
• Other physicochemical equipment

The Q46P/R type pH/ORP meter is a highly accurate, reliable, and versatile measuring instrument. It is used for the routine monitoring of pH values in various liquid processing systems, including water supply and drainage, wastewater, cooling water, pure water, cleaning water in food manufacturing processes, and cooling water in chemical plants, among many others.

• Water quality testing
• Other physicochemical equipment
• Instrumentation and Control Systems

The Q46C2 conductivity meter is a highly precise and reliable measuring instrument for measuring the high purity water required in pure water systems. It features a large, easy-to-read LED display, and the sub-display can show temperature and other information. Since it may be appropriate to display values in resistivity units, the Q46C2 conductivity meter allows for the measurement unit to be changed.

• Other physicochemical equipment
• Instrumentation and Control Systems