ＩＢＳ List of Products and Services

The "ITNH Series" is a PSA nitrogen gas generation system that uses low-noise, long-life oil-free compressors manufactured by domestic companies. Additionally, it is equipped with a constant flow control valve as standard, which means it is not affected by pressure fluctuations on the secondary side. The device has a built-in water drain vaporizer, allowing it to be installed in various locations. IBS's "Gas Generation System" is supplied as OEM to various companies. Through maintenance contracts, we provide accurate product advice tailored to customer specifications from the perspective of manufacturing gas generation systems. We not only design and select products according to generation volume and specifications but also provide selection and advice on ancillary equipment. 【Features】 ■ Increased generation volume and discharge pressure Adopts low-noise, long-life oil-free compressors from domestic manufacturers, achieving a performance increase of 10-20% in flow rate compared to conventional models, with a significant increase in discharge pressure. ■ Revamped microcontroller control circuit Changed the LCD display to four lines, greatly increasing the amount of information displayed. ■ Custom specifications are also available We can accommodate high purity (99.999%) and high-pressure requirements. *For more details, please refer to the PDF materials or feel free to contact us.

The "ITN Series" is a PSA nitrogen gas generator equipped with a proven low-noise, long-life oil-free compressor (1 to 4 units) that can be used in quiet indoor environments due to its highly soundproof structure. Additionally, it is compact and lightweight, with a built-in water drain vaporizer, allowing for flexible installation locations. During operation, it monitors the purity of the nitrogen gas and the total operating time, displaying this information on an LCD screen. If there is a purity anomaly or a problem with the compressor, the cause will be indicated on the display. It is outside the applicable range of pressure vessels (Japan). By incorporating a transformer (optional), it can also be used overseas. 【Features】 ■ High purity (99.99%) with a 20% increase in output compared to conventional models ■ Oil-free mini compressor with built-in oxygen concentration sensor ■ Microcontroller control and LCD display ■ Low noise and long-life design ■ Outside the applicable range of second-class pressure vessels 【Specifications】 ■ Method: PSA ■ Purity: 99 to 99.99% ■ Output: 5.4 to 52 L/min *For more details, please refer to the PDF document or feel free to contact us.

■ Method PSA ■ Suitable for outdoor installation ■ Purity 99 to 99.99% ■ Generation rate 8 to 150 Nm3/h

This is a nitrogen gas generation system capable of controlling multiple units. It consists of a master unit with control functions and several slave units that are PSA units only. The number of operating slave units can be controlled via the touch panel of the master unit according to the required amount of nitrogen gas, making it a revolutionary PSA system. Unlike gas cylinders, the gas generation system does not require replacement, leading to reduced labor for exchanges and lower running costs compared to cylinders. 【Features】 ■ Method: PSA ■ Purity: 99–99.99% ■ Generation capacity: 15–600 Nm3/h <Expandable according to requirements> Utilizing the features of the conventional model, it consists of a master PSA unit with full control functions and slave units that are PSA units of the same capacity. Up to three slave units can be added as needed, allowing for a selection of generation capacities at 99.99% purity ranging from 15 to 300 Nm3/h. (There are six types of generation capacities at 99.99%: 15, 20, 30, 40, 50, 60, and 75 Nm3/h.) *For more details, please download the PDF or feel free to contact us.

The "ITOK Series" is a PSA oxygen gas generator that has evolved into a more multifunctional device with sequence control via PLC, while maintaining easy operation through a color touch panel display and comprehensive control. By incorporating a silencer box in the internal exhaust section of the package type, we have minimized noise during exhaust. Additionally, it is one of the smallest classes of PSA package types. 【Features】 ■ Compact ■ Touch panel operation ■ Purity over 90% ■ Generation capacity of 0.8 to 12 Nm3/h *For more details, please refer to the PDF document or feel free to contact us.

The "ITOZ Master Series" is a groundbreaking PSA that allows for the installation of multiple child units (ExtraPSA) alongside a master unit (MasterPSA) equipped with control functions. The number of child units in operation can be controlled via the touch panel of the master unit according to the required amount of oxygen gas. While the master unit can be used alone in preparation for future expansions, this PSA is characterized by the benefits it offers when used in combination with child units. Since the master unit comprehensively controls the child units, when considering a doubling of O2 generation capacity, additional child units can be added at half the cost of the master unit. The operation of child units can be stopped according to the usage of O2 gas, allowing for a reduction in electricity costs. This product achieves continuous and near-constant O2 gas generation by staggering the adsorption and desorption timing with the combined child units. As a result, the pressure within the O2 buffer tank is maintained at a constant level, achieving a high discharge pressure of 0.3 to 0.35 MPa. 【Features】 ■ Expandable ■ Purity 90% ■ Generation capacity 4.5 to 120 Nm3/h *For more details, please refer to the PDF document or feel free to contact us.

The "ITO Outdoor Series" is a PSA oxygen gas generation system that can be installed outdoors, featuring an oil-free mini compressor and built-in oxygen concentration sensor. It monitors the purity of the oxygen gas and the total operating time during operation, displaying this information on an LCD (display unit). If there is an abnormality in purity or a problem with the compressor, the cause will be displayed on the unit. Equipped with a proven low-noise, long-life oil-free compressor (1 to 4 units), it can be used in quiet environments due to its highly soundproof structure. Additionally, by incorporating a transformer (optional), it can be used overseas. It is outside the scope of application for Category II pressure vessels. 【Features】 ■ Outdoor installation type ■ Purity of 90% or more ■ Generation capacity of 2.5 to 16 Nm3/h (50Hz) ■ Microcomputer control and LCD display ■ Low noise, long-life design *For more details, please refer to the PDF materials or feel free to contact us.

The "IAOK Series" is a PSA oxygen gas generation device that can produce oxygen gas internally as needed for the equipment. Its compact design allows for integration in tight spaces. It can be used for various purposes as long as there is an air source and power supply, and it can also accommodate built-in compressors. Additionally, it can be manufactured outside the scope of second-class pressure vessels. We offer customized solutions (OEM supply) based on your requirements. Please let us know your specifications. 【Specifications】 ■ Purity: 90% or higher ■ Flow rate: 0.2NL/min to 12Nm3/h *For more details, please refer to the PDF document or feel free to contact us.

The "ITO Series" is a PSA oxygen gas generation device that incorporates an oil-free mini compressor and an oxygen concentration sensor. It monitors the purity of the oxygen gas during operation and the accumulated operating time, displaying this information on an LCD (display unit). If there is a purity anomaly or a problem with the compressor, the cause will be indicated on the display unit. Equipped with a proven low-noise, long-life oil-free compressor (1 to 4 units), it can be used in quiet indoor environments due to its highly soundproof structure. Its compact and lightweight design includes a built-in water drain vaporization device, allowing for flexible installation locations. Additionally, by incorporating a transformer (optional), it can be used overseas. It is outside the scope of application for Category II pressure vessels. 【Features】 ■ Purity over 90% ■ Output range of 2.5 to 16 NL/min (50Hz) ■ Microcomputer control and LCD display ■ Low noise and long-life design *For more details, please refer to the PDF document or feel free to contact us.

The "N2-DT604 Series" is a nitrogen gas generator that employs a unique membrane (membrane separation technology) for nitrogen gas generation. It requires no power supply or expensive, hazardous, and inconvenient nitrogen cylinders; it can be easily used by simply supplying compressed air. Inside the nitrogen gas generation device, there is a separation membrane called a membrane module, which consists of bundled hollow fibers. Compressed air passes through these hollow fibers to separate the gases and generate nitrogen gas (by separating it from other gases). Gas separation depends on the difference in gas separation rates, and the nitrogen concentration can be easily obtained at a high level by utilizing the dependence on the supply pressure of the compressed air. 【Features】 ■ Unique membrane separation technology for nitrogen gas generation ■ No sliding moving parts due to the membrane method ■ No need for expensive, hazardous, and inconvenient nitrogen cylinders ■ No power supply required ■ Compact design and lightweight, easy installation, saving valuable floor space ■ Usable for various applications *For more details, please refer to the PDF document or feel free to contact us.

The "ITACL-O2 Medium Series" is a PSA oxygen gas generation system that incorporates a compressor, dryer, and inverter within the oxygen gas generator, achieving comprehensive control through touch panel operation. It is a medium-sized model. By incorporating a self-diagnosis function, any abnormalities that occur will be displayed on the color touch panel, allowing for appropriate service responses. Operational controls and status can be managed via the color touch panel display, which will show any abnormal locations if issues arise, enabling suitable responses. With a built-in low-noise oil-free compressor unit and thorough soundproofing measures, it can be used even in quiet indoor environments. 【Features】 ■ Medium size ■ Touch panel operation ■ Purity over 90% ■ Generation rate of 100–200 NL/min *For more details, please refer to the PDF materials or feel free to contact us.

The "ITOZ Outdoor Series" is a PSA oxygen gas generation system that allows for the control of the number of operating units based on the amount of O2 gas used. By reducing the consumption of raw air, it lowers the CP power consumption, resulting in significant energy savings and a reduction in CO2 emissions. Conventional two-tower PSA systems produce O2 gas intermittently because the two adsorption towers operate alternately. The number-controlled PSA achieves continuous O2 gas generation by staggering the adsorption and desorption timing with the combined units. As a result, the pressure inside the O2 buffer tank is maintained at a constant level, achieving a high discharge pressure of 0.3 to 0.35 MPa. Additionally, since the raw air is supplied sequentially from the air tank built into the main unit, it can protect the compressor without increasing tank capacity even when the generation amount increases. This allows for energy savings and space efficiency without the need for additional tanks, even when combined with an inverter-type compressor. 【Features】 ■ Outdoor installation type ■ High discharge pressure ■ Touch panel operation ■ Purity 90% ■ Generation amount 9 to 60 Nm3/h ■ Energy-saving operation function *For more details, please refer to the PDF document or feel free to contact us.

The "ITOS Outdoor Series" is a medium-sized touch panel-operated PSA oxygen gas generator. It has been further miniaturized compared to the conventional model. It features an easy access design that allows control and maintenance from the front. With further noise reduction, it can be installed in work environments with people without causing concern. Additionally, it has a built-in air tank, so it does not put a strain on the compressor even when directly connected. 【Features】 ■ High flow rate series ■ Operation settings and management displayed on a color display touch panel ■ Space-saving and low noise settings ■ Built-in air tank ■ Dedicated oil mist filter unit *For more details, please refer to the PDF document or feel free to contact us.

The "ITOS Series" is a PSA oxygen gas generation device of high flow type that is easy to operate. Operating settings and management are displayed on a color display touch panel. The conventional model has been further miniaturized. In addition to an easy access design that allows control and maintenance from the front, it has been made even quieter, so it won't be a concern when installed in work environments with people. It has a built-in air tank, so there is no burden on the compressor even when directly connected. Additionally, the air tank can be used as an O2 buffer tank to accommodate discharge pressures higher than the standard O2 gas discharge pressure. In this case, it is recommended to install the air tank between the compressor and this O2 generation device. 【Features】 ■ High flow rate ■ Touch panel operation ■ Purity 90% ■ Generation rate 4.5–30 Nm3/h *For more details, please refer to the PDF document or feel free to contact us.

The "ITOK Outdoor Series" is a compact touch panel-operated outdoor oxygen gas generation device. While maintaining easy operation and comprehensive control via a color touch panel display, it has evolved into a more multifunctional device compared to conventional models through sequence control using PLC. By incorporating a silencer box in the internal exhaust section of the package type, we have minimized noise during exhaust. 【Features】 ■ Drip-proof structure allows for outdoor installation ■ Usable for various purposes if an air source is available ■ Equipped with a 3.5-inch QVGA high-definition display touch panel ■ Low noise design ■ Outside the applicable range of second-class pressure vessels *For more details, please refer to the PDF materials or feel free to contact us.

The "ITACL-O2 Outdoor Series" is a PSA oxygen gas generation system designed for outdoor installation, featuring a built-in compressor, dryer, and inverter for comprehensive control via a touch panel. It incorporates an oil-free scroll compressor ranging from 11kw to 22kw and a compact refrigerated dryer. The adsorption tank and product tank utilize second-class pressure vessels, and air-operated valves are employed for high durability. With a self-diagnosis function, any abnormalities are displayed on the color touch panel, allowing for appropriate service responses. Additionally, operational controls and status can be managed through the color touch panel display, which shows any abnormal conditions, enabling timely responses. Furthermore, it includes a low-noise oil-free compressor unit and thorough soundproofing measures, making it suitable for use in quiet indoor environments. [Features] - Medium size - Outdoor type - Touch panel operation - Purity over 90% - Generation rate of 100–200 NL/min *For more details, please refer to the PDF document or feel free to contact us.*

The "ITACL-O2 Medium Series" is an oxygen gas generation device with a built-in medium-sized compressor that operates via a touch panel. It features a compact compressor-integrated oxygen PSA with medium-sized oil-free scroll compressors ranging from 11kw to 22kw, along with a refrigerated air dryer. By incorporating a self-diagnosis function, it can display the location of any abnormalities on the color touch panel, enabling appropriate service responses. 【Features】 ■ Compact and lightweight one-package design ■ Comprehensive control panel operated via touch panel ■ Built-in low-noise oil-free compressor unit ■ Can be used in quiet indoor environments due to thorough soundproofing measures ■ One-year equipment warranty *For more details, please refer to the PDF materials or feel free to contact us.

The "ITAC-O2 Compact Series" is a PSA oxygen gas generation system that incorporates a compressor, dryer, and inverter within the oxygen gas generator, achieving comprehensive control through touch panel operation. It houses an oil-free compressor and a refrigerated dryer in a compact design, and also includes a water drain vaporization device. Additionally, operational controls and status monitoring can be managed via a color touch panel display, which shows any abnormalities on the display, allowing for appropriate responses. Other features include equipment status monitoring, abnormal output notifications, weekly timers, maintenance time management, abnormal history checks, remote operation, and oxygen concentration monitoring. 【Features】 ■ Compact ■ Touch panel operation ■ Purity over 90% ■ Generation rate of 14 to 68 NL/min *For more details, please refer to the PDF document or feel free to contact us.

The "INHP Series" is a super compact, low-noise, energy-saving controlled PSA nitrogen gas generator that operates via a touch panel. It is a culmination of patented energy-saving operation technology that reduces raw air based on the product gas usage and patented energy-saving operation technology that controls multiple PSA units. Designed with a low-pressure compressor (0.69MPa) for high energy-saving effects, it can generate nitrogen gas at the same level as conventional systems even with low-pressure factory air that is energy-saving compliant. 【Features】 ■ High performance even with low-pressure raw air ■ High discharge pressure, low noise, and space-saving design with reduced height ■ Energy-saving operation mode using unique control technology ■ High durability with long maintenance cycles *For more details, please refer to the PDF document or feel free to contact us.

The "ITZH Outdoor Series" is a nitrogen gas generation system capable of controlling multiple units. Since the system is composed of multiple units, it can stop the operation of child units according to the usage of N2 gas, thus avoiding unnecessary air consumption. Additionally, it is equipped with a flow control function to manage adsorption time. The consumption of raw air does not equal the power cost of the compressor, allowing for significant energy savings and reductions in CO2 emissions. 【Features】 ■ Touch panel operation ■ Energy-saving operation function ■ High discharge pressure ■ Built-in air tank ■ Low noise design *For more details, please refer to the PDF document or feel free to contact us.

The "ITSH Series" is a nitrogen gas generation device designed with a low-noise structure that allows for all maintenance to be performed from the front. It has a built-in air tank, so connecting it directly does not put a burden on the compressor. Additionally, the air tank can be used as an N2 buffer tank, allowing it to accommodate discharge pressures higher than the standard N2 gas discharge pressure. 【Features】 ■ Newly equipped with energy-saving operation function ■ Space-saving and low-noise settings ■ Built-in air tank ■ Dedicated oil mist filter unit *For more details, please refer to the PDF materials or feel free to contact us.

The "ITKH Outdoor Series" is a nitrogen gas generation device that allows for settings and confirmations of operating mode, operation management, and diagnostics during abnormal conditions via a touch panel. By adjusting the switching time of the device and the number of operating units based on the flow rate of nitrogen gas used, it enables various operating settings such as "flow operation mode" (energy-saving operation) that avoids unnecessary air usage, and "tank pressure operation" that monitors the pressure of the product's nitrogen gas receiver tank for automatic operation. 【Features】 ■ Drip-proof structure suitable for outdoor installation ■ Various settings available, including energy-saving operation ■ Equipped with a 3.5-inch QVGA high-definition display touch panel *For more details, please refer to the PDF materials or feel free to contact us.

The "ITKH Series" is a compact and lightweight nitrogen gas generator. By incorporating a silencer box in the internal exhaust section of the package type, we minimized noise during exhaust. Additionally, by combining 2 to 4 units internally in the PSA, it can accommodate large flow rates. When the usage flow rate of nitrogen gas is low, the number of operating units can be reduced, achieving control through a "flow operation mode" that avoids unnecessary air usage. 【Features】 ■ Compact and lightweight ■ Various settings available for energy-saving operation ■ Equipped with a 3.5-inch QVGA high-definition display touch panel ■ Low noise design *For more details, please refer to the PDF document or feel free to contact us.

The "ITAC Outdoor Series" is a microcontroller-controlled oil-free mini compressor with a built-in nitrogen gas generation system. Unlike conventional models, the cycle of suction and discharge can be freely set. The compressor's start and stop are controlled according to the product's nitrogen gas discharge flow rate, reducing the consumption of raw air. This not only achieves significant energy savings and CO2 emission reductions but also greatly extends the lifespan of the compressor. 【Features】 ■ Drip-proof structure allows for outdoor installation ■ Operation settings available in Japanese and English ■ Operating conditions can be managed via a touch panel ■ Utilizes a unique energy-saving system ■ One-year equipment warranty *For more details, please refer to the PDF document or feel free to contact us.

The "ITAC Series" is a microcontroller-controlled oil-free mini compressor with a built-in nitrogen gas generation system. It has evolved to be more multifunctional while maintaining the easy operation and comprehensive control of conventional models. Not only can operation settings and management of operating conditions be performed via a touch panel in Japanese and English, but it also features a unique control system that enables energy-saving operation according to the nitrogen gas discharge amount. 【Features】 ■ Operation settings available in Japanese and English ■ Management of operating conditions via touch panel ■ Adoption of a unique energy-saving system ■ Internal water drainage processing capability ■ One-year equipment warranty *For more details, please refer to the PDF materials or feel free to contact us.

The "ITN Outdoor Series" is a microcontroller-controlled oil-free mini compressor with a built-in nitrogen gas generation device. It monitors the purity of nitrogen gas during operation and the total operating time, displaying this information on an LCD (display unit). If there is a purity anomaly or a problem with the compressor, the cause will be indicated on the display. Additionally, it is outside the applicable range for pressure vessels (in Japan). By incorporating a transformer (optional), it can also be used overseas. 【Features】 ■ High purity (99.99%) ■ Drip-proof structure for outdoor installation ■ Microcontroller control and LCD display ■ Low noise and long lifespan design ■ Outside the applicable range for second-class pressure vessels *For more details, please refer to the PDF materials or feel free to contact us.

The "ITNH Outdoor Series" is a microcontroller-controlled oil-free mini compressor with a built-in nitrogen gas generation system. Compared to conventional models, it offers a 10-20% performance improvement in flow rate. The discharge pressure has also been significantly increased. Additionally, it comes standard with a constant flow control valve for flow adjustment, which means it is not affected by pressure fluctuations on the secondary side. 【Features】 ■ Uses a low-noise, long-life oil-free compressor made by a domestic manufacturer ■ 10-20% performance improvement in flow rate compared to conventional models ■ Significant increase in discharge pressure ■ Standard equipped with a constant flow control valve for flow adjustment ■ Not affected by pressure fluctuations on the secondary side *For more details, please refer to the PDF document or feel free to contact us.

The "H2PD Series" is a super high-purity hydrogen gas generator designed for alkaline electrolyte specifications. It can also be used as a carrier gas for gas chromatography. Additionally, the stored hydrogen gas inside the device is kept below 50cc at any pressure. Users can perform self-maintenance (electrolyte replacement) as well. We have overwhelming trust and a proven track record in the global market for gas generation devices aimed at the analytical industry. 【Features】 ■ Purity of 99.99999% or higher, pressure of 0.4MPa ■ Two models available with maximum gas flow rates of 150cc/min and 300cc/min ■ Uses palladium in the electrolysis cell ■ Capable of generating pure and dry hydrogen gas *For more details, please refer to the PDF document or feel free to contact us.

The "H2PEM Series" is a high-purity hydrogen gas generator capable of supplying combustion gas suitable for FID for up to 14 units. Thanks to its advanced purity management system and control circuitry, it allows for long hours of operation. The operating status is displayed through the color of the lighting, making it easy to check the water level and operational status. Additionally, we also offer the "H2PD Series" and "H2 Series," which can be used as carrier gases for gas chromatography. 【Features】 ■ Capable of supplying combustion gas suitable for FID for up to 14 units ■ Monitoring and remote control of operating status via USB connection (optional) ■ CSA/UL/cUL/CE mark certified for research use ■ Compact design with a required bench area of only 0.09m² ■ No electrolyte required *For more details, please refer to the PDF materials or feel free to contact us.