東邦インターナショナル List of Products and Services

Dynamic friction coefficient: Compliant with NEMA and IEC standards. High-precision load cell. High-precision linear bearing. LCD display. With RS-232 output. Equipped with wire linear machine and guide system. Test wire size: 0.05 - 2.0 mm. Static friction coefficient: Compliant with IEC standards. Motorized tilting platform. Tilting platform and sliding block wire tension mechanism. Test wire size: 0.05 - 2.0 mm. Tangent angle: 0 - 30 degrees.

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments
• Defect Inspection Equipment

1. Continuous production 2. High efficiency and single-step process 3. Low defect rate 4. Low energy consumption 5. Quick product changeover 6. Product manufacturing from the same wire material or other wire materials 7. Product manufacturing from materials such as bars, granules, cast materials, and powders 8. Lower investment costs compared to other methods 9. Ability to maintain tight tolerances on a continuous basis 10. Product extrusion in a softened state, allowing for easy operation and handling 11. Depending on requirements, it is possible to avoid using lubrication on the product surface or internally to enhance bonding effects.

• Extrusion Machine
• Other processing machines

• 100% repeatable shapes, dimensions, and weights • Consistent dimensions and shapes of stable ingot bundles • 25% reduction in storage space • Casting bars solidify without cracks or dangerous voids • No skimming required • Mechanically imprinted traceability data • Zero molding defects • Minimum number of required straps

• Casting Machine
• aluminum
• Other processing machines

The CM5 from CERSA is a measurement and inspection device for optical fiber cores after coating. - It can measure outer diameter, detect bumps, identify internal defects, check for internal delamination of the coating, and assess coating uniformity, all inline. A key feature is that it has no moving parts inside, eliminating the need for annual calibration. One unit per line! This is the new standard for optical fiber manufacturing lines. - Specifications □ Fiber diameter measurement: 50–400µm □ 5-axis unevenness detection □ Detection of internal defects in the coating (bubbles, impurities, delamination, etc.) (optional) □ Coating uniformity detection (optional) □ Fiber position measurement (for automatic alignment adjustment): ±0.1mm Additionally, by using the dedicated software CIM, it is easy to graph changes in wire diameter during the manufacturing process and automatically record the occurrence location and time of defects at the start of production. It is also possible to manage multiple devices collectively, which greatly aids in production management.

• Defect Inspection Equipment

The CERSA NCTM is a measuring device for optical fiber filaments before coating. It measures tension non-contactly by utilizing changes in the refractive index inside the fiber. - Specifications □ Measurement range: 0 to 400 grams □ Fiber diameter: 80 to 240 µm □ Repeatability: ±1 gram □ Uncertainty: ±1 gram □ Measurement frequency: 1 kHz □ Fiber position measurement (for automatic alignment adjustment): ±0.1 mm Additionally, by using the dedicated software CIM, it is easy to automatically record graphs of diameter changes during the manufacturing process, as well as the occurrence location and time of defects, right from the start of production. It is also possible to manage multiple devices collectively, which greatly aids in production management.

• Defect Inspection Equipment

The AIR manufactured by CERSA is a measuring device for bare optical fibers before coating. Since it inspects in three axes, it can thoroughly examine the entire fiber without any gaps, even without a span (turning). By using this product, it is possible to conduct void inspections more accurately, thereby reducing the amount of fiber that needs to be discarded. - Specifications □ Minimum detectable bubble size: 0.3um □ Measurement frequency: 400Hz □ Fiber position measurement (for automatic alignment adjustment): Uncertainty: ±0.1um By using the dedicated software CIM, it is easy to automatically record graphs of diameter changes during the manufacturing process, as well as the occurrence location and time of defects, right from the start of production. It is also possible to manage multiple devices collectively, which greatly aids in production management.

• Other inspection equipment and devices

The LISG manufactured by CERSA is a measuring device for optical fiber strands. - It can measure internal defects, span (turning) frequency, internal bubble detection (only during span), roundness, and fiber vibration frequency, all inline. One of its features is that there are no moving parts inside, eliminating the need for annual calibration. One unit per line! A new standard for optical fiber manufacturing lines. - Specifications □ Fiber diameter measurement: 125µm Measurement frequency: 5 kHz (optional: 50 kHz) Repeatability: ±0.005 µm □ Defect detection function: 50 kHz event recording function □ Microbubble detection (detectable only during fiber turning) □ Span frequency and fiber roundness measurement function (optional) □ Fiber diameter stability measurement function (optional) □ Fiber position: ±0.1 mm Additionally, by using the dedicated software CIM, changes in wire diameter during the manufacturing process can be easily graphed, and the occurrence location and time of defects can be automatically recorded at the start of production. It is also possible to manage multiple devices collectively, greatly aiding in production management.

• Defect Inspection Equipment

To improve rolling production efficiency in an operable and safe manner. To produce strip material without twisting and in a regular pattern. To perform rolling up to 0.5 mm. To achieve zero maintenance. To produce strip material with stable quality and repeatable precision. To perform rolling of various widths with the same machine. To carry out simultaneous production with the same reduction rate for multiple items. To avoid damage to the strip material through tension control. To recycle all precious metals.

• Plastic processing machines (cutting and rolling)
• Non-ferrous metals
• Rare metals

Reasons for choosing tandem rolling: To improve operational efficiency and safety in rolling production. To produce strip material without twisting and in a regular manner. To perform rolling down to 0.5 mm. To achieve zero maintenance. To create strip material with stable quality and repeatable precision. To perform rolling of various widths with the same machine. To simultaneously produce multiple items with the same reduction rate. To avoid damage to the strip material through tension control. To recycle all precious metals.

• Plastic processing machines (cutting and rolling)
• Non-ferrous metals
• Other processing machines

The "Mini Wiper" from Hustis is equipped with a wear-resistant ceramic at the entrance and exit of the body, eliminating concerns about scratching the wire. Therefore, it is suitable for bare wire drainage. Its non-segmented, compact body can be installed even in narrow processing areas. It is suitable for drainage of steel bands, multi-lines, and more. Customization is possible to meet customer specifications. *For custom products, the spring hinge allows for segmentation, ensuring smooth passage of the product. 【Features】 ■ Compatible with wire diameters from 0 to 8.7mm, available in 6 sizes ■ Efficient, economical, and quiet drainage with minimal air consumption ■ The body is made of ultra-high molecular weight polyethylene, which excels in corrosion and wear resistance ■ Does not scratch products, and the body itself has a long lifespan ■ Custom-made air wipers can also be manufactured *For more details, please refer to the PDF document or feel free to contact us. Air Miser / Air Wiper / Water Drainage / Moisture Removal / Dry Air / Air Drying / Energy Saving / Ceramic / Wire / Cable / Line

• Extrusion Machine
• Plastic Mould
• cable

Benefits of the Sjogren Dog SD Series 1. Claw opening and closing lever - Allows for pot hanging work with the claws open. The one-touch button easily catches the wire. 2. Safety handle - Using it in conjunction with the safety handle further enhances safety! 3. Claws can be used twice! - When the claws wear out, the upper and lower claws can be flipped and reused. ☆ The Sjogren company's tonus uses two jaws (claws) and the power of springs to grip the wire without using wedges. ☆ Safe pot hanging work can be performed without relying on the operator's experience. ☆ Using it together with a spring-loaded safety chain further enhances safety. Features ■ Safe because the operator can hang pots without placing hands or fingers near! ■ Safe because the operator can work from outside the safety measures! ■ Safe because there is no need to drive in wedges with a hammer! ■ Safe because the chain can be lightly stretched by hand and temporarily secured with the spring tension! ■ Safe because the safety chain prevents the wire from flailing even if it comes loose!

• Other safety and hygiene products

Benefits of the S&H-TR Series ☆ Wire Release Lever - It has a lever for removing the wire from the ton after the pot hanging operation, allowing for safe removal of the wire from the ton! ☆ The ton from Shogren Company uses two jaws (claws) and the power of springs to hold the wire without using wedges. ☆ It allows for safe pot hanging operations without relying on the operator's experience. ☆ Using it in conjunction with a spring-loaded safety chain further enhances safety. Features ■ Operators can perform pot hanging without placing their hands or fingers near it, ensuring safety! ■ Operators can work safely from outside the safety measures! ■ No need to drive in wedges with a hammer, making it safe! ■ The chain can be lightly stretched by hand, allowing for temporary hanging with the tension of the spring, ensuring safety! ■ The safety chain prevents the wire from flailing even if it comes loose, ensuring safety! With excellent accident prevention measures, you can use it safely and with peace of mind!

• Other safety and hygiene products

Benefits of the PB Type Linear Straightening Machine by Sjögren 1. Body Opening and Closing Mechanism - Wire threading is possible while maintaining roller adjustments. ⇒ Significantly reduces downtime due to wire threading and roller adjustments! 2. Directionality Changeable - Directionality can be freely changed. * When layout changes require a change in the direction of the pass line, the lever arrangement for opening and closing the body can be modified later. 3. Selectable Directionality - When used on two sides, you can choose from four combinations of vertical and horizontal orientations. You can select the optimal directionality according to the wire's characteristics. * Aligning the direction of the wire's characteristics with the straightening machine's directionality greatly changes the difficulty of roller adjustments. This machine is used by a wide range of manufacturers, not just wire and cable manufacturers. We will propose the optimal roller size, quantity, and groove shape according to wire size and application. Features - Various groove processing options are available, including V grooves, U (R) grooves, and flat square grooves. - We can propose suitable models based on the material and condition of the wire. - Our experienced staff will provide solutions to any issues you may have with linear straightening.

• Plastic processing machines (cutting and rolling)

Advantages of the Shogren Linear Straightening Machine LD Type 1. It is a high-precision linear straightening machine that focuses on the alignment of roller grooves. 2. Low cost due to its simple structure. 3. We can propose models with 3 rollers or more. * The model with 3 rollers is intended for use with back tension. It is used by a wide range of manufacturers, not limited to wire and cable manufacturers. We will propose the optimal roller size, number, and groove shape according to the wire size and application. Features - Various groove processing options are available, including V grooves, U (R) grooves, and flat square grooves. - We can propose suitable models based on the material and condition of the wire. - Our experienced staff will provide solutions for any issues you may have with linear straightening. * For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

Advantages of the Shogren Direct Linear Correction Machine EC Type 1. Main Body Opening and Closing Lever - Allows threading while maintaining roller adjustments. ⇒ Significantly reduces downtime caused by threading and roller adjustments! 2. Selectable Orientation - You can choose from 8 different combinations of vertical and horizontal orientations. You can select the optimal orientation based on the wire's characteristics. *Aligning the direction of the wire's characteristics with the orientation of the correction machine greatly changes the difficulty of roller adjustments. This machine is used by a wide range of manufacturers, not just wire and cable manufacturers. We will propose the optimal roller size, quantity, and groove shape according to wire size and application. Features - Various groove processing options are available, including V grooves, U (R) grooves, and flat square grooves. - We can recommend suitable models based on the material and condition of the wire. - Our experienced staff will provide solutions for any issues you may have with linear correction. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

◆Surface roughness 0.1-0.2µm Ra! ◆Polished guides with low friction resistance that do not compromise product quality 【Polishing Features】 Standard polishing: 0.525-0.75µm Ra We offer pig tail polishing, which can only be done by a few companies in the world, at an affordable price.

• Other consumables

◆Surface roughness 0.1-0.2µm Ra! Achieved a very smooth finish through diamond polishing. ◆Diamond-polished guides with low friction resistance that do not compromise product quality. 【Polishing Features】 Standard polishing: 0.525-0.75µm Ra Diamond polishing: 0.1-0.2µm Ra We offer diamond-polished U-guides, a service that only a few companies in the world can provide, at an affordable price.

• Other consumables

★ Lightweight (aluminum), low starting torque ★ Excellent concentricity ★ Short delivery time ★ No mold required ★ Flexible to various dimensions When inquiring, please provide the dimension drawings of the product.

• Other consumables

◆Surface roughness 0.1-0.2µm Ra! Achieves a very smooth finish through diamond polishing. ◆Diamond-polished guides with low friction resistance that do not compromise product quality. We offer U-guides with diamond polishing, a process that only a few companies in the world can perform, at an affordable price. 【Polishing Features】 Standard polishing: 0.525-0.75µm Ra Diamond polishing: 0.1-0.2µm Ra

• Other consumables

◆Surface roughness 0.1-0.2µm Ra! Achieves a very smooth finish through diamond polishing. ◆Diamond polished guides with low friction resistance that do not compromise product quality. We offer U-guides with diamond polishing, a process that only a few companies in the world can perform, at an affordable price. 【Polishing Features】 Standard polishing: 0.525-0.75µm Ra Diamond polishing: 0.1-0.2µm Ra

• Other consumables

Rivalenzo is an Italian caterpillar belt manufacturer. We custom-make caterpillars for cable manufacturing lines. We supply caterpillars as OEM to renowned extrusion machine manufacturers in Europe. We customize our products to fit the specifications of your manufacturing line and the cables being pulled. If you are experiencing issues with belt breakage or short lifespan, please consider us! ■ Designed to minimize seams and breakage ■ Suitable for high-pressure cables under heavy loads ■ High-quality customized caterpillars made in Italy *For more details, please refer to the PDF document or feel free to contact us.

• others

This is a vertical enamel baking furnace for winding manufactured by NUOVA TECNO TA (NTT) in Italy. This new product has been realized by changing the design of the catalyst box, which is now equipped with a new catalyst plate called ECOPLATE. These changes enable compliance with the strictest pollution standards applicable worldwide, while also achieving a reduction in electrical energy consumption (the lowest consumption in the market). Of course, the advantages of reliability, ease of use, and low maintenance costs that DELTA FLAT offers are also inherited by EVO. Additionally, operation can be performed intuitively, and the installed PC allows for recipe registration of manufacturing processes (temperature, wind speed, etc.) for each type of product. The manufacturing data itself is displayed clearly in charts, and the temperature and wind speed at various locations during production can be monitored on the screen. Manufacturing data can also be automatically saved daily, making it very useful for development and later analysis. Notably, not only the manufacturing history but also the operation history is fully saved, allowing for a complete record of who made setting changes and what errors occurred.

• Winding Machine

We are a specialized manufacturer of crossheads for Swiss extrusion. Crosshead E20P Maximum core (insulation) diameter [mm]: 20 Maximum compression die diameter [mm]: 20 Maximum tube diameter [mm]: 0 Generally, the crosshead is not a limiting factor for line speed. The smaller and more multi-core it is, the more limiting factors arise due to feeding and winding. In the case of thicker cables, such as elevator cables, the limitation relates to the output of the extruder. Erokab has extensive experience with flat cables and can accommodate various sizes and geometries. Therefore, when you reach a specific consideration stage, please provide us with information and drawings that include dimensions, tolerances, and material information, and we can introduce you to the most optimized type. We appreciate your consideration.

• Extrusion Machine
• Resin mold
• cable

We are a specialized manufacturer of Swiss extrusion crossheads. Model name: E4BN10 Crosshead E4 Maximum core (insulation) diameter [mm] 4 Maximum compression die diameter [mm] 7 Maximum tube diameter [mm] 9 Core alignment method Non-adjustable core type; fine-adjustable core type Angle adjustment for chips and dies Yes Chip axis rotation adjustment No Heating method Electric Heating for crosshead 2 Heating for main connection part 1 Heating for auxiliary connection part 0 Heating for distributor No Approximate weight 10

• Extrusion Machine
• Resin mold
• cable

It is an air-operated cable dryer system that pursues drying speed and efficiency, preventing malfunctions caused by residual moisture and reducing material loss. It accommodates cables ranging from 2mm to 65mm (maximum line speed of 1,200m/min).

• Non-ferrous metals
• Other metal materials
• cable

This is a handheld tension meter manufactured by Tensometric in Germany. Features: Since it is portable, having one unit per line allows it to be used in various locations! - Custom rollers can be ordered, making it possible to measure any object such as wires, cables, or sheets! - Calibration is very simple and can be done in three steps! - Visualization of the production process enables standardization of manufacturing. - The wide pitch of the rollers minimizes the tendency for the line to become kinked. Applications: Production management... Digitally quantifying the tension applied during manufacturing. Before twisting process... Preventing twisting distortion caused by slack in the line. Before heat treatment... Checking in advance whether the tension is optimal to avoid elongation and thinning after heat treatment. Plating process... Without tension management, the plating can become uneven after the process. Rated load: Measurement range: 1 cN - 1,999 cN Display: 1 cN increments *Other options available upon consultation. Measurement range: 0.1 N - 80.0 N Display: 10 cN (0.1 N) increments *Other options available upon consultation.

• Other weight measuring instruments

This is a handheld tension meter manufactured by Tensometric in Germany. Features: Since it is portable, having one unit per line allows it to be utilized in various locations! - Custom rollers can be ordered, making it possible to measure any object such as wires, cables, or sheets! - Calibration is very simple and only requires three steps! - Visualization of the production process enables standardization of manufacturing. - The wide pitch of the handheld roller minimizes the tendency for the line to become kinked. Applications: Production management... Digitally quantifying the tension applied during manufacturing. Before twisting process... Preventing distortion of twists caused by sagging of the line. Before heat treatment... Checking in advance whether the tension is optimal to prevent elongation and thinning after heat treatment. Plating process... Without tension management, the plating can become uneven after processing. Rated load: - 20N (2,000 cN) model Displayed value: Every 0.01 N (1 cN) - 100 N model Displayed value: Every 0.1 N (10 cN)

• Other weight measuring instruments

This is a handheld tension meter made by Tensometric in Germany. Features: Since it is portable, having one unit per line allows it to be used in various locations! ■ Customizable rollers enable measurement of any object, whether wire, cable, or sheet! ■ Calibration is very simple and can be done in three steps! ■ Visualization of the production process allows for standardization of manufacturing. ■ The wide pitch of the handheld roller minimizes the tendency of the line to kink. Applications: Production management... Digitally quantifying the tension applied during manufacturing. Before twisting process... Preventing twisting distortion caused by slack in the line. Before heat treatment... Checking in advance whether the tension is optimal to prevent elongation and thinning after heat treatment. Plating process... Without tension management, the plating can become uneven after the process. Rated load: 100cN Measurement range: 0.0cN - 100.0cN 200cN Measurement range: 0.0cN - 199.9cN 300cN Measurement range: 1cN - 300cN *There is also a model called Handy Tens NM with the display on top!

• Other weight measuring instruments

UK-made non-contact inline external diameter and eccentricity measuring device by Proton Corporation The eccentricity measuring device from Proton Corporation measures cable eccentricity inline, wall thickness at 8 points, external diameter in 2 axes, and roundness. It measures eccentricity with 4 axes at 8 points and external diameter in 2 axes.

• Other measurement, recording and measuring instruments

Proton's outer diameter measuring device is an essential tool for measuring outer diameters in the cable and wire industry. We offer a variety of models that accommodate wire diameters ranging from 0.1mm to 180mm. Additionally, we have 1-axis, 2-axis, and 3-axis models available, so we can recommend the best model for your company's needs!

• Other measurement, recording and measuring instruments

Used in the extrusion process in the cable and wire industry, it is particularly suitable for inline temperature management after the preheater. It has received positive feedback for preheating measurements ranging from 0.3 to 5.0 mm.

• Radiation thermometer

UK Proton Corporation Spark Tester: ST1525-HF ◇ Voltage: 0.5 to 15kV (Voltage can be adjusted in 0.1 increments) ◇ Frequency: 2.1 to 4.4 KHz (Sine wave) 【Features】 - Capable of identifying pinholes and wire stripping - Resistant to rust and corrosion, allowing for stable measurements - A rich lineup of AC, DC, and HF models - Stainless steel body prevents corrosion from corona discharge, and the design effectively prevents water droplets from entering the electrical circuit board, ensuring a long lifespan!

• Distance measuring device
• Electrical Instruments/Electrometers
• Other measurement, recording and measuring instruments

Proton's preheater is a device that performs preheating before the cable extrusion process! 【Features】 - It is a preheater for aluminum wire that accommodates wire diameters from φ0.6mm (cross-sectional area 0.28mm²) to φ2.0mm (cross-sectional area 3.14mm²). - It was the first aluminum preheater developed and sold in the world 10 years ago, contributing to the electrification of aluminum. - In conventional preheaters, contact with copper alloy pulleys caused corrosion in aluminum wires, making them unusable. To solve this issue, we use ceramic pulleys to create a closed circuit by making contact between wires, allowing for preheating. - It follows the line speed, maintaining a constant preheating temperature.

• Extrusion Machine

Proton's preheater is a device that performs preheating before the cable extrusion process! 【Features】 - With a pulley outer diameter of φ100mm, we have achieved preheating of φ0.25mm (0.05mm²) by minimizing heat loss with a copper alloy pulley! - It follows the line speed, maintaining a constant preheating temperature. - We also have demo units available, so please feel free to contact us.

• Resin processing machine

The natural diamond dice from Fort Wayne, USA, use only diamonds that have undergone directional inspection by X-ray, resulting in minimal individual variation and a stable lifespan. Since the diamonds are sourced through Fort Wayne's unique route, a stable supply is ensured. The straight shape produced by wire processing is a characteristic feature, contributing to increased recognition within Japan.

• Other cutting tools

【For Copper Wire】 ◆ Low labor costs and high equipment efficiency: It reaches maximum speed within 5 seconds and can stop within 3 seconds during an emergency stop. It can immediately feed wire without the need for threading. The wire feeding to the winding device takes less than 10 seconds. ◆ No annealing device is required. ◆ Small power transformer. ◆ Environmentally friendly: It can achieve energy savings of 50% or more compared to conventional rough drawn wire, approximately 120 kWh/t. ◆ No copper dust is generated during the process. ◆ Space for downstream processes can be provided. It is very compact, with a total length of 5 meters. ◆ Installation costs can also be kept low. 【For Aluminum Wire】 ◆ In the drawing process, compared to elongation, rolling has no tension, resulting in less work hardening of the wire material. ◆ The number of intermediate anneals can be reduced, allowing for a more flexible process to be established. ◆ The temperature of the processed wire material reaches 200°C or higher before winding. ◆ Wire speed can be up to 25 m/sec, or faster responses can be achieved.

• Plastic processing machines (cutting and rolling)
• Other processing machines

The PWM cold pressure welding machine ST40 can easily cold pressure weld copper/aluminum with a maximum width of 45mm and a maximum cross-sectional area of 33mm². 【Features】 - Not only pure copper and pure aluminum, but also non-ferrous metals such as gold wire and silver wire, as well as dissimilar metals like copper and silver can be cold pressure welded depending on the materials. - The main body is designed to be robust and resistant to breakage. There are no demo units available domestically, but sample testing is possible at the manufacturer. Please contact us for more details.

• Other work tools

The PWM cold pressure welding machine P1500 can easily cold pressure weld wires of copper from 15.0 to 25.0 mm and aluminum from 15.0 to 30.0 mm. The welding is controlled by a hydraulic cylinder using a PLC. 【Features】 - Cold pressure welding is possible not only with pure copper and pure aluminum but also with non-ferrous metals such as gold wire and silver wire, as well as dissimilar metals like copper and silver, depending on the materials. - Cold pressure welding is also possible with materials other than round wire. - The main body is designed to be robust and resistant to damage. There are no demonstration machines available domestically, but sample testing can be conducted at the manufacturer. Please contact us for more details.

• Other work tools

The PWM cold pressure welding machine P1000 can easily cold pressure weld wires of copper from 6.0 to 15.0 mm and aluminum from 6.0 to 20.0 mm. Sufficient air volume and pressure are required for pressure welding using a hydraulic cylinder. 【Features】 - Cold pressure welding is possible not only with pure copper and pure aluminum but also with non-ferrous metals such as gold wire and silver wire, or even dissimilar metals like copper and silver, depending on the materials. - Cold pressure welding is also possible with wires other than round wires. - The main body is designed to be robust and resistant to breakage. We also have some consumables in stock. There are no demo machines available domestically, but sample testing is possible at the manufacturer. Please contact us for more details.

• Other work tools

The PWM cold pressure welding machine EP500 can easily cold pressure weld wires of copper from 5.0 to 12.5mm and aluminum from 5.0 to 15.0mm. It requires a sufficient amount and pressure of air as it is controlled by a PLC and uses pneumatic pressure for welding. 【Features】 - Cold pressure welding is possible not only with pure copper and pure aluminum but also with non-ferrous metals such as gold and silver wires, or even dissimilar metals like copper and silver, depending on the materials. - Cold pressure welding is also possible with materials other than round wires. - Since no heat is applied during the welding process, the welded area retains the same properties and strength as the base material. - The machine itself is designed to be robust and durable. We also have some stock of consumables available. There are no demo machines available domestically, but sample testing can be conducted at the manufacturer. Please contact us for more details.

• Other work tools

The PWM cold pressure welding machine HP200 can easily cold pressure weld copper/aluminum wires ranging from 2.0 to 6.0 mm. 【Features】 - In addition to pure copper and pure aluminum, cold pressure welding of non-ferrous metals such as gold and silver wires, as well as dissimilar metals like copper and silver, is possible depending on the materials. - Cold pressure welding of non-round wires is also possible. - Since no heat is applied during the welding process, the welded area maintains the same properties and strength as the base material. - The main unit is easy to repair, and we have parts in stock, so we also offer repair services. While there are no demo units available domestically, sample testing can be conducted at the manufacturer. Please contact us for more details.

• Other work tools

The PWM cold pressure welding machine HP100 can easily perform cold pressure welding of copper/aluminum wires ranging from 1.0 to 5.0 mm. 【Features】 - Cold pressure welding is possible not only with pure copper and pure aluminum but also with non-ferrous metals such as gold and silver wires, as well as dissimilar metals like copper and silver, depending on the materials. - Cold pressure welding is also possible with shapes other than round wires. - Since no heat is applied during the welding process, the welded area maintains the same properties and strength as the base material. - The main unit is easy to repair, and we have parts in stock, so we also offer repair services. While there are no demonstration units available domestically, sample testing can be conducted at the manufacturer. Please contact us for more details.

• Other work tools

The PWM cold pressure welding machine M101 can easily cold pressure weld copper: 1.0 to 3.6mm and aluminum: 1.0 to 5.0mm. 【Features】 - Cold pressure welding is possible not only with pure copper and pure aluminum but also with non-ferrous metals such as gold wire and silver wire, or with dissimilar metals like copper and silver, depending on the materials. - Cold pressure welding is also possible with materials other than round wire. - Since no heat is applied during the welding process, the welded area maintains the same properties and strength as the base material. - The main unit is easy to repair, and we have parts in stock, so we also offer repair services. The main unit and dies are available for loan. There are limitations on die sizes, so please contact us with the sizes you would like to try.

• Other work tools

【Features】 ◇ Available in a compact and user-friendly tabletop type ◇ The large flash butt welding machine BAS300 series automates the entire process from welding to annealing with PLC control ◇ Achieves stable work processes and quality even when manufacturing a variety of sizes and types!! ◇ Stable quality manufacturing is possible with servo motor control!! ◇ Automatic annealing is performed while managing temperature with a pyrometer. ◇ Improved operability with a touchscreen and the ability to save parameters for each type with a recipe storage function!!

• Welding Machine
• Annealing furnace

Toho International offers a variety of wire rewinding lines manufactured by Ramnea in Sweden. We provide a diverse range of rewinding lines used in manufacturing environments for various types of wires, including welding wire, stainless steel wire, other hard steel wire, and soft steel wire. Our solutions achieve labor-saving, alignment, speed enhancement, and automation for shipping packaging and in-process rewinding. ● From iron bobbins to plastic spools ● From bobbins to coils ● From coil to coil ● From bobbins to pail packs (cardboard drums), etc. We propose cutting-edge equipment that realizes high efficiency, high quality, and labor-saving necessary for manufacturing sites, including high-speed rewinding, aligned winding, and fully automatic rewinding. 【Features】 ■ State-of-the-art wire drawing equipment from Europe ■ High-speed aligned winding through high-precision machining and control technology ■ High-precision fully automatic rewinding lines that achieve labor-saving ■ Easy operation via touch panel and recipe recall ■ Visualization and output of a wide variety of process information *For more details, please feel free to contact us.

• Other machine elements